SIMATIC Brazil_1061\ 10/29/2010 02:59:30 PM

SIMATIC 400\CPU 416-2 DP\...\DB200 - <offline>

DB200 - <offline> - Declaration view

"Crane general data"
Global data block DB 200
Name: Family:
Author: Version: 0.1
Block version: 2
Time stamp Code: 07/12/2005 03:59:27 PM
Interface: 07/12/2005 03:59:27 PM
Lengths (block/logic/data): 00490 00164 00000

Block: DB200

Address Name Type Initial value Comment

0.0 STRUCT
+0.0 HPOS_MUL REAL 2.454266e-002 HOIST MUL PARAMETER
+4.0 HPOSPS DINT L#167056 HOIST POSITION PRESET VALUE
+8.0 HUPSTPPOS INT 20 HOIST UP STOP POSITION
+10.0 HUPSLOPOS INT 1000 HOIST UP SLOWDOWN POSITION
+12.0 HLDNSLOPOS_U INT 2600 HOIST DOCKSIDE DOWN SLOWDOWN POSITION(UNLOCK)
+14.0 HLDNSLOPOS_L INT 2310 HOIST DOCKSIDE DOWN SLOWDOWN POSITION(LOCK)
+16.0 HLDNSTPPOS_U INT 3580 HOIST DOCKSIDE DOWN STOP POSITION(UNLOCK)(spare)
+18.0 HLDNSTPPOS_L INT 3350 HOIST DOCKSIDE DOWN STOP POSITION(LOCK)(spare)
+20.0 HSDNSLOPOS_U INT 4200 HOIST SEASIDE DOWN SLOWDOWN POSITION(UNLOCK)
+22.0 HSDNSLOPOS_L INT 3910 HOIST SEASIDE DOWN SLOWDOWN POSITION(LOCK)
+24.0 HSDNSTPPOS_U INT 5190 HOIST SEASIDE DOWN STOP POSITION(UNLOCK)
+26.0 HSDNSTPPOS_L INT 4900 HOIST SEASIDE DOWN STOP POSITION(LOCK)
+28.0 HDNSL0POS_U INT 1800 HOIST DOWN SLOWDOWN OVER SILBEAM POSITION(UNLOCK)
+30.0 HDNSLOPOS_L INT 1510 HOIST DOWN SLOWDOWN OVER SILBEAM POSITION(LOCK)
+32.0 HDNSTPLPOS_U INT 2780 HOIST DOWN STOP OVER SILBEAM POSITION(UNLOCK)
+34.0 HDNSTPLPOS_L INT 2490 HOIST DOWN STOP OVER SILBEAM POSITION(LOCK)
+36.0 TPOS_MUL REAL 3.992580e-002 TROLLEY MUL PARAMETER
+40.0 TPOSPS DINT L#61364 TROLLEY POSITION PRESET VALUE
+44.0 TREVSTPPOS INT 50 TROLLEY REVERSE STOP POSITION
+46.0 TREVSLOPOS INT 0 TROLLEY REVERSE SLOWDOWN POSITION
+48.0 TLSFSLOPOS INT 780 TROLLEY LANDSIDE SILBEAM FORWARD SLOWDOWN POSITON
+50.0 TLSFSTPPOS INT 930 TROLLEY LANDSIDE SILBEAM FORWARD STOP POSITION
+52.0 TLSRSTPPOS INT 1670 TROLLEY LANDSIDE SILBEAM REVERSE STOP POSITION
+54.0 TLSRSLOPOS INT 1820 TROLLEY LANDSIDE SILBEAM REVERSE SLOWDOWN POSITON
+56.0 SPARE3 INT 0
+58.0 TSSFSLOPOS INT 3728 TROLLEY SEASIDE SILBEAM FORWARD SLOWDOWN POSITON
+60.0 TSSFSTPPOS INT 3878 TROLLEY SEASIDE SILBRAM FORWARD STOP POSITON
+62.0 TSSRSTPPOS INT 4798 TROLLEY SEASIDE SILBEAM REVERSE STOP POSITON
+64.0 TSSRSLOPOS INT 4948 TROLLEY SEASIDE SILBEAM REVERSE SLOWDOWN POSITON
+66.0 TODKPOS INT 4400 TROLLEY OVERDOCK POSITION
+68.0 LSSILLBPOS INT 1250 LANDSIDE SILLBEAM CENTER POSITION
+70.0 WSSILLBPOS INT 4298 WATERSIDE SILLBEAM CENTER POSITION
+72.0 TFWDSLOPOS INT 7938 TROLLEY FORWARD SLOWDOWN POSITION
+74.0 TFWDSTPPOS INT 8998 TROLLEY FORWARD STOP POSITION
+76.0 BPOS_MUL REAL 1.437408e-002 BOOM MUL PARAMETER
+80.0 BPOSPS DINT L#34932 BOOM POSITION PRESET
+84.0 BDNSTPPOS INT 5 BOOM DOWN STOP POSITION
+86.0 BDNSLOPOS INT 200 BOOM DOWN SLOWDOWN POSITION
+88.0 BMIDSLOPOS INT 0 BOOM AT MIDDLE SLOWDOWN POSITION
+90.0 BMIDSTPPS INT 0 BOOM AT MIDDLE STOP POSITION
+92.0 BUPSLOPOS INT 7950 BOOM UP SLOWDOWN POSITION
+94.0 BLCOLPOS INT 8000 BOOM PROTECT LATCH COLLISION POSITION
+96.0 BUPSTPPOS INT 8215 BOOM UP STOP POSITON
+98.0 AMIGO_DECLARE INT 0 /*********** FOLLOWING IS CRANE ID DATA ************/
+100.0 LD1_SUB INT 50 LOADCELL 1 PARAMETER
+102.0 LD2_SUB INT 50 LOADCELL 2 PARAMETER
+104.0 LD3_SUB INT 50 LOADCELL 3 PARAMETER
+106.0 LD4_SUB INT 50 LOADCELL 4 PARAMETER
+108.0 LD_MUL REAL 1.567460e-001 LOADCELL 1 PARAMETER
+112.0 LD2_MUL REAL 0.000000e+000 LOADCELL 2 PARAMETER
+116.0 LD3_MUL REAL 0.000000e+000 LOADCELL 3 PARAMETER
+120.0 LD4_MUL REAL 0.000000e+000 LOADCELL 4 PARAMETER
+124.0 HCTRPOS INT 0 HOIST POSITION OFFSET
+126.0 HPOSUP_CHK INT 0 HOIST POSITION UP CHECK
+128.0 HPOSDN_CHK INT 0 HOIST POSITION DOWN CHECK
+130.0 TCTRPOS INT 0 TROLLEY POSITION OFFSET
+132.0 TPOSFWD_CHK INT 0 TROLLEY POSITION FORWARD CHECK

Page 1 of 2
SIMATIC Brazil_1061\ 10/29/2010 02:59:30 PM
SIMATIC 400\CPU 416-2 DP\...\DB200 - <offline>

Address Name Type Initial value Comment

+134.0 TPOSREV_CHK INT 0 TROLLEY POSITION REVERSE CHECK
+136.0 TPAPKPOS INT 0 TROLLEY AT PARK POSITION
+138.0 TFLAG INT 0 TROLLEY FLAG POSITION
+140.0 HFLAG INT 0 HOIST FLAG POSITION
+142.0 BCTRPOS INT 0 BOOM POSITION OFFSET
+144.0 BPOSUP_CHK INT 0 BOOM POSITION UP CHECK
+146.0 BPOSDN_CHK INT 0 BOOM POSITION DOWN CHECK
+148.0 TLS1CTRPOS DINT L#0 T/L/S#1 OFFSET POSITION
+152.0 TLS2CTRPOS DINT L#0 T/L/S#2 OFFSET POSITION
+156.0 TLS3CTRPOS DINT L#0 T/L/S#3 OFFSET POSITION
+160.0 TLS4CTRPOS DINT L#0 T/L/S#4 OFFSET POSITION
=164.0 END_STRUCT

Page 2 of 2