Scribd
Upload
8 views

Arduino

Arduino notes

Uploaded by

santodevil2711
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

Arduino

Arduino notes

Uploaded by

santodevil2711
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Arduino

Arduino is an open-source electronics platform based on easy-to-use hardware


and software. It consists of a microcontroller, which is a small computer on a single
integrated circuit, and a development environment (the Arduino IDE) that allows users
to write and upload code to the microcontroller.

Installing and Setting up the Arduino IDE

Step 1: Download the Arduino IDE

1. Visit the Official Website: Go to the Arduino Software page.


2. Choose Your Version: Select the appropriate version for your operating
system (Windows, macOS, or Linux).
3. Download the Installer: Click on the download link. You may need to agree
to some terms before the download starts.

Step 2: Install the Arduino IDE

For Windows:

1. Run the Installer: Locate the downloaded .exe file and double-click it.
2. Follow the Prompts: Choose your installation options. It’s usually fine to keep
the defaults.
3. Install Drivers: If prompted, allow the installation of drivers that enable
communication with Arduino boards.

For macOS:

1. Open the Disk Image: Locate the downloaded .dmg file and double-click it.
2. Drag to Applications: Drag the Arduino icon into the Applications folder.
3. Launch the IDE: Open the Applications folder and double-click on the
Arduino icon. You might need to allow it through your security settings.

For Linux:

1. Extract the Archive: Open a terminal and navigate to the directory where the
downloaded file is located. Use tar -xvf arduino-* to extract it.
2. Run the Install Script: Navigate into the extracted folder and run sudo
./install.sh.
3. Add User to dialout Group: This is necessary for serial port access. Use
sudo usermod -aG dialout $USER and then log out and back in.

Step 3: Launch the Arduino IDE

 Open the Arduino IDE from your applications or programs menu.


Step 4: Configure the IDE

1. Select Your Board:


o Go to Tools > Board and choose your specific Arduino board model
(e.g., Arduino Uno, Arduino Mega, etc.).
2. Select the Port:
o Connect your Arduino board to your computer via USB.
o Go to Tools > Port and select the port associated with your board (it
usually looks like COM3 on Windows or /dev/ttyUSB0 on Linux).

Step 5: Install Libraries (if needed)

 Some projects require additional libraries. You can install them via:
o Sketch > Include Library > Manage Libraries...
o Search for the library you need and click Install.

Step 6: Write and Upload Your First Sketch

1. Open an Example Sketch:


o Go to File > Examples > Basics > Blink.
2. Upload the Sketch:
o Click the right arrow (Upload) icon in the toolbar. Make sure the code
compiles without errors.
o The onboard LED on your Arduino should start blinking!

You might also like