ENGINEERING GRAPHICS (Electronics, Computer and allied Course Code : 311008

branches)
: Artificial Intelligence/ Artificial Intelligence and Machine Learning/ Automation
and Robotics/ Cloud Computing and Big Data/
Computer Technology/ Computer Engineering/ Computer Science & Engineering/
Digital Electronics/
Data Sciences/ Electronics & Tele-communication Engg./ Electronics &
Programme Name/s
Communication Engg./ Electronics Engineering/
Computer Hardware & Maintenance/ Instrumentation & Control/ Industrial
Electronics/ Information Technology/
Computer Science & Information Technology/ Instrumentation/ Medical Electronics/
Electronics & Computer Engg./
Programme Code : AI/AN/AO/BD/CM/CO/CW/DE/DS/EJ/ET/EX/HA/IC/IE/IF/IH/IS/MU/TE
Semester : First
Course Title : ENGINEERING GRAPHICS (Electronics, Computer and allied branches)
Course Code : 311008

I. RATIONALE

Engineering graphics is the language of engineers. The concepts of graphical language are used in expressing the
ideas, conveying the instructions, which are used in carrying out the jobs on the sites, shop floor etc. This course
is useful in developing drafting and sketching skills in the student. It covers the knowledge & use of drawing
instruments & also familiarizes the learner about Bureau of Indian standards related to engineering drawing. The
curriculum aims at developing the ability to draw and read various engineering curves, projections and
dimensioning styles. The subject mainly focuses on use of drawing instruments, developing imagination and
translating ideas into sketches. This course also helps to develop the idea of visualizing the actual object or part
on the basis of drawings and blue prints. This preliminary course aims at building a foundation for the further
courses related to engineering drawing and other allied courses in coming semesters

II. INDUSTRY / EMPLOYER EXPECTED OUTCOME

Prepare engineering drawing using prevailing drawing instruments.

III. COURSE LEVEL LEARNING OUTCOMES (COS)

Students will be able to achieve & demonstrate the following COs on completion of course based learning

CO1 - Draw geometrical figures and engineering curves.

CO2 - Apply principles of orthographic projections for drawing given pictorial views.
CO3 - Apply basic CAD commands for drawing different entities.
CO4 - Use various drawing codes, conventions and symbols as per IS SP-46 in engineering drawing.
CO5 - Draw free hand sketches of given engineering elements.

IV. TEACHING-LEARNING & ASSESSMENT SCHEME

Learning Scheme Assessment Scheme
Actual
Based on LL &
Contact Based
Theory TSL
Course Course Hrs./Week on SL
Course Title Abbr Credits Paper Total
Code Category/s SLH NLH Practical
Duration Marks
FA- SA-
CL TL LL Total FA-PR SA-PR SLA
TH TH
Max Max Max Min Max Min Max Min Max Min
 ENGINEERING
GRAPHICS
311008 (Electronics, EGP DSC 2 - 4 - 6 3 - - - - 50 20 50@ 20 - - 100
Computer and allied
branches)

Total IKS Hrs for Sem. : 2 Hrs

Abbreviations: CL- ClassRoom Learning , TL- Tutorial Learning, LL-Laboratory Learning, SLH-Self Learning
Hours, NLH-Notional Learning Hours, FA - Formative Assessment, SA -Summative assessment, IKS - Indian
Knowledge System, SLA - Self Learning Assessment
Legends: @ Internal Assessment, # External Assessment, *# On Line Examination , @$ Internal Online
Examination
Note :

1. FA-TH represents average of two class tests of 30 marks each conducted during the semester.
2. If candidate is not securing minimum passing marks in FA-PR of any course then the candidate shall be
declared as "Detained" in that semester.
3. If candidate is not securing minimum passing marks in SLA of any course then the candidate shall be
declared as fail and will have to repeat and resubmit SLA work.
4. Notional Learning hours for the semester are (CL+LL+TL+SL)hrs.* 15 Weeks
5. 1 credit is equivalent to 30 Notional hrs.
6. * Self learning hours shall not be reflected in the Time Table.
7. * Self learning includes micro project / assignment / other activities.

V. THEORY LEARNING OUTCOMES AND ALIGNED COURSE CONTENT

Suggested
Theory Learning Outcomes Learning content mapped with Theory Learning
Sr.No Learning
(TLO's)aligned to CO's. Outcomes (TLO's) and CO's.
Pedagogies.
Unit - I Basic Elements of Drawing
TLO 1.1 Prepare drawing 1.1 Drawing Instruments and supporting material:
using drawing instruments. method to use them with applications.
TLO 1.2 Use IS SP-46 for 1.2 Standard sizes of drawing sheets (ISO-A series)
dimensioning. 1.3 I.S. codes for planning and layout.
TLO 1.3 Use different types 1.4 Letters and numbers (single stroke vertical) Model
1
of lines. 1.5 Convention of lines and their applications. Demonstration
TLO 1.4 Draw regular 1.6 Scale - reduced, enlarged & full size
geometrical figures. 1.7 Dimensioning techniques as per SP-46 (Latest
TLO 1.5 Draw figures having edition) – types and applications of chain, parallel and
tangency constructions. coordinate dimensioning
1.8 Geometrical constructions.
Unit - II Engineering curves & Loci of Points.
2.1 Concept and understanding of focus, directrix,
TLO 2.1 Explain different
vertex and eccentricity. Conic sections.
engineering curves with
2.2 Methods to draw an ellipse by Arcs of circle method
areas of application.
& Concentric circles method.
TLO 2.2 Draw different conic
2.3 Methods to draw a parabola by Directrix-Focus
sections.
method & Rectangle method
TLO 2.3 Draw involute and
2 2.4 Methods to draw a hyperbola by Directrix-Focus Demonstration
cycloidal curves.
method.
TLO 2.4 Draw helix and
2.5 Methods to draw involutes: circle & pentagon,
spiral curves from the given
2.6 Methods to draw Cycloidal curve: cycloid,
data
epicycloid and hypocycloid
TLO 2.5 Plot Loci of points
2.7 Methods to draw Helix & Archimedean spiral.
from the given data.
2.8 Loci of points on Single slider crank mechanism
with given specifications
 Suggested
Theory Learning Outcomes Learning content mapped with Theory Learning
Sr.No Learning
(TLO's)aligned to CO's. Outcomes (TLO's) and CO's.
Pedagogies.
TLO 3.1 Explain methods of
the given types of
Unit - III Orthographic projections
Projections.
3.1 Introduction of projections-orthographic,
TLO 3.2 Draw orthographic
perspective, isometric and oblique: concept and
views of simple 2D entities Model
applications.
containing lines, circles and Demonstration
3 3.2 Orthographic projection: First angle and Third
arcs only Video
angle method, their symbols. Conversion of pictorial
TLO 3.3 Draw orthographic Demonstrations
view into Orthographic Views – object containing plain
views from the given
surfaces, slanting surfaces, slots, ribs, cylindrical
pictorial views.
surfaces.
TLO 3.4 Use IS code IS SP-46
for dimensioning technique
Unit - IV Computer Aided Drafting
TLO 4.1 Draw basic 2D 4.1 Basic entities: line, circle, arc, polygon, ellipse,
entities in Auto CAD rectangle, multiline, polyline.
software 4.2 Commands: trim, delete, copy, offset, array, block,
TLO 4.2 Modify and edit the layers.
given commands. 4.3 Dimensioning: linear, horizontal, vertical, aligned, Presentations
4 TLO 4.3 Prepare 2D drawing rotated, baseline, continuous, diameter, radius, angular Video
of the given simple dimensions. Demonstrations
engineering components 4.4 Text: Single line, multiline.
using Auto CAD software. 4.5 Standard sizes of sheet, selecting various plotting
TLO 4.4 Print given drawing parameters such as paper size, paper units, drawing
using printer/ plotter orientation, plot scale, plot offset, plot area, print
preview.
Unit - V Free Hand Sketches of Engineering
TLO 5.1 Sketch proportionate
Elements
freehand sketches of the
5.1 Free hand sketches of machine elements: Thread
given machine elements. Model
5 profiles, nuts, bolts, studs, set screws, washers, Locking
TLO 5.2 Select proper Demonstration
arrangements. (For branches other than mechanical
fasteners and locking
Engineering, the teacher should select branch specific
arrangement.
elements for free hand sketching)

VI. LABORATORY LEARNING OUTCOME AND ALIGNED PRACTICAL / TUTORIAL EXPERIENCES.

Practical / Tutorial /
Sr Laboratory Experiment / Practical Titles / Tutorial Number Relevant
Laboratory Learning
No Titles of hrs. COs
Outcome (LLO)
Draw horizontal, vertical, 30 degree, 45 degree, 60 & 75
LLO 1.1 Use drawing
1 degrees lines using Tee and Set squares/ drafter. (Sketch 2 CO1
instruments
Book).
LLO 2.1 Use IS code related
to dimensioning standard Draw different types of lines, dimensioning styles
2 2 CO1
LLO 2.2 Draw the given types (Sketch Book)
of lines
Draw one figure showing dimensioning techniques, two
LLO 3.1 Draw figure as per
3 problems on redraw the figures and one problem on loci 2 CO1
the given sketch
of points - slider crank mechanism. (Sketch Book)
Draw one figure showing dimensioning techniques, two
LLO 4.1 Draw figures using
4 problems on redraw the figures and one problem on loci 4 CO1
IS Standard for drawing
of points - slider crank mechanism. (01 Sheet)
LLO 5.1 Identify different
Engineering curves
5 Draw any four Engineering Curves (Sketchbook) 2 CO1
LLO 5.2 Draw different types
of curves
 Practical / Tutorial /
Sr Laboratory Experiment / Practical Titles / Tutorial Number Relevant
Laboratory Learning
No Titles of hrs. COs
Outcome (LLO)
LLO 6.1 Identify different
Engineering curves
6 Draw any four Engineering Curves – (01 Sheet) 4 CO1
LLO 6.2 Draw different types
of curves
LLO 7.1 Apply method of Draw two problems on orthographic projections using
CO2
projection for drawing 7 first angle method of projection having plain surfaces, 2
CO4
simple orthographic views slanting surfaces and slots etc.- ( Sketchbook)
LLO 8.1 Apply method of Draw two problems on orthographic projections using
CO2
projection for drawing 8 first angle method of projection having plain surfaces, 4
CO4
simple orthographic views slanting surfaces and slots etc.- (01 Sheet)
LLO 9.1 Apply method of Draw two problems on orthographic projections using
CO2
projection for drawing 9 first angle method of projection having cylindrical 2
CO4
complex orthographic views surfaces, ribs etc. (Sketchbook)
LLO 10.1 Apply method of Draw two problems on orthographic projections using
CO2
projection for drawing 10 first angle method of projection having cylindrical 4
CO4
complex orthographic views surfaces, ribs etc.- (01 Sheet)
LLO 11.1 Apply CAD
Draw basic 2D entities like rectangle, rhombus, polygon,
commands for drawing 11 4 CO3
arcs, circles using CAD. Commands.
different entities.
LLO 12.1 Apply CAD
Draw basic 2D entities using rectangular and circular
commands for drawing 12 2 CO3
arrays.
different entities.
LLO 13.1 Apply CAD
Draw basic branch specific components using CAD CO3
commands for drawing 13 2
commands CO4
different entities.
LLO 14.1 Apply CAD
Draw complex branch specific components using CAD CO3
commands for drawing 14 4
commands. CO4
different entities.
Problem Based Learning: Given the orthographic views
LLO 15.1 Draw Orthographic of at least three objects with few missing lines, the CO2
15 2
views of a given object. student will try to imagine the corresponding objects, CO4
complete the views and draw these views (sketch book).
LLO 16.1 Draw standard
discipline oriented Draw freehand Sketches of 12 different standard
16 2 CO5
components using free hand components (Sketch book)
.
LLO 17.1 Draw standard
discipline oriented Draw freehand Sketches of 12 different standard
17 2 CO5
components using free hand components (1 Sheet)
.
CO1
LLO 18.1 Collect information
CO2
of an ancient Indian culture Correlate ancient Indian sculptures, Indian temples,
18 2 CO3
related to engineering Monuments, etc. with Engineering Graphics
CO4
graphics
CO5

VII. SUGGESTED MICRO PROJECT / ASSIGNMENT/ ACTIVITIES FOR SPECIFIC LEARNING / SKILLS
DEVELOPMENT (SELF LEARNING)

Micro project

List the applications of engineering curves in different fields of engineering and submit a report on it.
Prepare a list of industrial and household components in which conic curves are used and justify the utility of
these curves.
VIII. LABORATORY EQUIPMENT / INSTRUMENTS / TOOLS / SOFTWARE REQUIRED
Relevant LLO
Sr.No Equipment Name with Broad Specifications
Number
1 Drawing Table with Drawing Board of Full Imperial/ A1 size. All
2 Models of objects for orthographic projections 7,8,9,10
3 Models/ Charts of objects mentioned in unit no. 5 16,17
4 Set of various industrial drawings being used by industries. All
Set of drawings sheets mentioned in section 6.0 could be developed by experienced
5 All
teachers and made used available on the MSBTE portal to be used as reference/standards.
Drawing equipment and instruments for class room teaching-large size: a. T-square or
drafter (Drafting Machine). b. Set squires (450 and 300-600) c. Protector. d. Drawing
6 All
instrument box (containing set of compasses and dividers). Drawing sheets, Drawing
pencils, Eraser, Drawing pins / clips
7 CAD Workstation: 2GB RAM, 320 GB HDD, 17" screen, 1GHz (Minimum Requirement) 11,12,13,14
8 Plotter: Print Resolution upto 1200X600 Dpi, 16 MB Memory 11,12,13,14
9 Licensed Latest Network of AutoCAD Software 11,12,13,14

IX. SUGGESTED FOR WEIGHTAGE TO LEARNING EFFORTS & ASSESSMENT PURPOSE (Specification Table)
Aligned Learning R- U- A- Total
Sr.No Unit Unit Title
COs Hours Level Level Level Marks
1 I Basic Elements of Drawing CO1 6 0 0 8 8
2 II Engineering curves & Loci of Points. CO1 6 0 0 8 8
3 III Orthographic projections CO2,CO4 8 0 0 16 16
4 IV Computer Aided Drafting CO3,CO4 4 0 0 8 8
Free Hand Sketches of Engineering
5 V CO4,CO5 6 0 0 10 10
Elements
Grand Total 30 0 0 50 50

X. ASSESSMENT METHODOLOGIES/TOOLS

Formative assessment (Assessment for Learning)

Term work

Summative Assessment (Assessment of Learning)

Practical

XI. SUGGESTED COS - POS MATRIX FORM

Programme
Specific
Programme Outcomes (POs)
Outcomes*
(PSOs)
Course PO-5
Outcomes PO-1 Basic Engineering
(COs) and PO-2 PO-3 Design/ PO-4 Practices for PO-7 Life
PO-6 Project PSO- PSO- PSO-
Discipline Problem Development Engineering Society, Long
Management 1 2 3
Specific Analysis of Solutions Tools Sustainability Learning
Knowledge and
Environment
CO1 3 - - 2 - 2 -
 CO2 3 - - 2 - 2 -
CO3 3 - - 2 - 2 -
CO4 3 - - 2 - 2 2
CO5 3 - - 2 - 2 -
Legends :- High:03, Medium:02,Low:01, No Mapping: -
*PSOs are to be formulated at institute level

XII. SUGGESTED LEARNING MATERIALS / BOOKS

Sr.No Author Title Publisher
Bureau of Indian Engineering Drawing Practice for Third Reprint, October 1998 ISBN No. 81-
1
Standards. Schools and Colleges IS: SP-46 7061-091-2
Charotar Publishing House, 2010 ISBN No.
2 Bhatt, N.D. Engineering Drawing
978-93-80358-17-8
Bhatt, N.D.; Charotar Publishing House, 2010 ISBN No.
3 Machine Drawing
Panchal, V. M 978-93-80358-11-6
Tata McGraw Hill Edu. New Delhi, 2010, ISBN
4 Jolhe, D.A. Engineering Drawing
No. 978-0-07-064837-1
S. Chand and Company New Delhi, ISBN No.
5 Dhawan, R. K. Engineering Drawing
81-219-1431-0
Pradhan, S.K Jain, Khanna Book Publishing CO(P) LTD, New
6 Engineering Graphics
K.K Delhi, ISBN No. 978-93-91505-50-9
Engineering Drawing and Graphics Vikas Publishing House Pvt. Ltd., First
7 Jeyapoovan T
using AutoCAD Reprint 2013, ISBN NO.978-81259-4000-5
AutoCAD 2013 2D & 3D for Civil and Aruta Publishers Chiplun, 2013, ISBN No.
8 Salunkhe R
Mechanical Engineering 978-81-902648-1-5

XIII . LEARNING WEBSITES & PORTALS

Sr.No Link / Portal Description
1 https://www.youtube.com/watch?v=dmt6_n7Sgcg Free Hand Sketches
2 https://www.youtube.com/watch?v=dmt6_n7Sgcg Orthographic Projection
3 https://www.youtube.com/watch?v=3WXPanCq9LI Basics of Projection
4 https://www.youtube.com/watch?v=fvjk7PlxAuo Introduction to Engineering Graphics
5 https://www.youtube.com/watch?v=cmR9cfWJRUU Basics of AutoCAD

MSBTE - Final Copy Dt.09.08.2023 1K