Scribd
Upload
41 views4 pages

Magnescale: Feedback Scale System For Rolling Mills

Uploaded by

jaridehmohammad31
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views4 pages

Magnescale: Feedback Scale System For Rolling Mills

Uploaded by

jaridehmohammad31
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Magnescale

Feedback scale System for Rolling mills

Head Scale Interpolator


HA-705LK MSS-976R MD50-2N/4N

• Major Rolling mill manufacturers around the world adopt this system.
• Proven and reliable digital measuring system for use in metal processing environments.
•HA705LK MSS-976R
Feedback control system can be incorporated into custom built equipment racks.
• 2 and 4 axis measuring system Head Scale
• Magnescale Technology
Head Scale

HA-705LK MSS-976R

-Excellent vibration resistance and waterproof


head, guaranteed high reliability.

Head : HA-705LK
Waterproof performance equivalent to IP67.

Structure of excellent vibration resistance and


shock resistance.
-Resist bad environment of rolling mill by water proof head
developed only for it and excellent against harsh environment
Magnescale.
-At tests done by our company, it has shock resistance which
is 30 to 50G at acceleration and 110G or more at drop test
(under our test condition).

Capable of extend with the cable only for it.


-Compliable with cable length up to max.150m
-Use material excellent for waterproof and oilproof
Scale rod : MSS-976R
Accuracy : ±3µm

Measuring length : 200mm up to 600mm


(Overall length ; 30+ML+30 mm)
Interpolator

MD50-2N/4N

-High reliability and many functions, it can


comply with a variety of equipments.

With max. response speed 100m/min, comply Selectable of setting 2 kinds and 6ways of alarm
with shocks of rolled material. output adjusting to user’s usages
-Alarm output can be detected with signal output to
Comply with world-wide power source : AC100 controller and with lump of main unit lighting. This
to 240V makes it monitor deteriorating with age, and it
becomes effective means of maintenance.
Selectable from 5 kinds of output pulse
resolution and 9 kinds of output pulse width Standard equipping A/B signal for monitor or
-Select resolution from 0.5 to 10µm, output pulse Up/Down signal output.
width from 0.1 to 4.0µs. -Possible to make A/B signal output as a monitor
for maintenance, except signal output to control
Can be selected A/B signal or Up/Down signal. device.

Body configuration of capable of inputting up to


max.4 axes.
-Capable of easy maintenance because of adopting
card type detector board. And, even if only 1 axis is out
of order, it can do with the change of only the board,
because each axis is independent.
Main specifications of MD50
Model name MD50-2N MD50-4N
Input axes 2 axes 4 axes
Scales to be connected HA-705LK
Resolutions 0.5, 1, 2, 5, 10µm (Selectable)
Output pulse width 0.1, 0.2, 0.4, 0.8, 1.0, 1.6, 2.0, 3.2, 4.0µs (Selectable)
Max. response speed 100m/min (Depending on the resolution and output pulse width)
Main output signal A/B signal or Up/Down signal (Selectable), Line driver output (Equivalent to SN75183)
Sub output signal A/B signal or Up/Down signal (Selectable), Line driver output (Equivalent to SN75183)
Synchronous signal Output for the stable reception of A/B or Up/Down signals.
Alarm functions Level alarm : Hi-level signal is output when the scale signal drops be 1.4Vp-p (or 0.6Vp-p) or less.
Speed alarm : Hi-level signal is output when the maximum response speed of scale is exceeded.
Alarm reset functions Manual reset operation : Push the RESET switch on the front panel.
Reset operation by external signal : Apply a DC voltage between 2 input terminal.
Cable length Max. 150m (Option : Extension cable : MK3 -30, -50, -100, -120, -135, -150)
Operating temperature 0 to 40°C
Storage temperature -20 to 60°C
Power consumption Max. 70 VA
Input power voltage 100 to 230V±10% 50/60Hz
Dimensions 260(W) x 359.5(D) x 141.5(H) mm
Mass Approx. 5.8Kg Approx. 7.0Kg
Applicable standards UL3101-1 , FCC Part 15, Subpart B, Class A
EMC Directive EN55011 Group 1, Class A
EN50082-2 , Low Voltage Directive EN61010-1

*Designs and appearances are subject to change without prior notice.


Sony Precision Technology Inc.
Toyo Building,9-17, Nishigotanda 3-chome, Shinagawa-ku, Tokyo,141-0031 Japan
Phone:+81-3-3490-9481
SONY is a registered trademark, and is used by Sony Precision Technology Inc.
under license from Sony Corporation.
Description in this brochure on the specifications as of Dec. 2001.

You might also like