Scribd Logo
Upload

Welcome to Scribd!

  • 42 views

    Anti Corrosive

    Uploaded by

    Shashank Sudhakar Pathak
    AAA Technology & Specialties Co., Inc. provides several corrosion protection products for pipes including TRI-WEAR pads that act as a protective covering between pipes and supports to prevent corrosion and abrasion. TRI-COMPOSITE pipe shoes are made of polyurethane foam cores with fiberglass shells for insulation and corrosion protection. TRI-GUARD thermoplastic supports eliminate metal-to-metal contact between pipes and supports to prevent corrosion. TRI-BOLT U-bolts have a neoprene coating for cathodic protection during support. Vibration control restraints use elastomeric pads to dampen vibrations while preventing corrosion. AAA Technology also offers other corrosion preventative methods for pipe clamps and stands.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Anti Corrosive

    Uploaded by

    Shashank Sudhakar Pathak
    42 views2 pages
    AAA Technology & Specialties Co., Inc. provides several corrosion protection products for pipes including TRI-WEAR pads that act as a protective covering between pipes and supports to prevent corrosion and abrasion. TRI-COMPOSITE pipe shoes are made of polyurethane foam cores with fiberglass shells for insulation and corrosion protection. TRI-GUARD thermoplastic supports eliminate metal-to-metal contact between pipes and supports to prevent corrosion. TRI-BOLT U-bolts have a neoprene coating for cathodic protection during support. Vibration control restraints use elastomeric pads to dampen vibrations while preventing corrosion. AAA Technology also offers other corrosion preventative methods for pipe clamps and stands.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    AAA Technology & Specialties Co., Inc. provides several corrosion protection products for pipes including TRI-WEAR pads that act as a protective covering between pipes and supports to prevent corrosion and abrasion. TRI-COMPOSITE pipe shoes are made of polyurethane foam cores with fiberglass shells for insulation and corrosion protection. TRI-GUARD thermoplastic supports eliminate metal-to-metal contact between pipes and supports to prevent corrosion. TRI-BOLT U-bolts have a neoprene coating for cathodic protection during support. Vibration control restraints use elastomeric pads to dampen vibrations while preventing corrosion. AAA Technology also offers other corrosion preventative methods for pipe clamps and stands.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    42 views2 pages

    Anti Corrosive

    Uploaded by

    Shashank Sudhakar Pathak
    AAA Technology & Specialties Co., Inc. provides several corrosion protection products for pipes including TRI-WEAR pads that act as a protective covering between pipes and supports to prevent corrosion and abrasion. TRI-COMPOSITE pipe shoes are made of polyurethane foam cores with fiberglass shells for insulation and corrosion protection. TRI-GUARD thermoplastic supports eliminate metal-to-metal contact between pipes and supports to prevent corrosion. TRI-BOLT U-bolts have a neoprene coating for cathodic protection during support. Vibration control restraints use elastomeric pads to dampen vibrations while preventing corrosion. AAA Technology also offers other corrosion preventative methods for pipe clamps and stands.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    AAA Technology & Specialties Co., Inc.

    CORROSION PROTECTION PRODUCTSTRIWEAR Pads


    TRIWEAR pads are pipe protective coverings used to prevent corrosion and electrical conductivity between the pipe and the pipe support. They also prevent metal to metal abrasion & dampen vibrations. TRIWEAR acts as a second skin reinforcing the contact surface. These pads are seal bonded to the pipe in order to prevent moisture collection behind the wear pads. Bonded TRIWEAR pads provide up to 45,000 psi compressive strength and work from -60F to 500F. They are available in pipe sizes from to 36.

    TRICOMPOSITE Pipe Shoes - (No Hot Permits required!)


    These shoes are easy to install and greatly reduce the Installed Cost per shoe. They can be epoxied to the pipe or banded as shown. Made from high density polyurethane foam cores (cut by numerical control equipment) with a toughened FRP outer shell, the shoe has enhanced thermal insulating properties while preventing electrical conductivity and corrosion and can be used for pipes from -350F up to 225F. Our TRICOMPOSITE Pipe Supports are available in light and heavy duty, strapped or bonded in pipe diameters of to 36.

    TRIGUARDTM Durable Thermoplastic Supports


    Corrosion between pipe supports and pipe at metal to metal contact points is a common problem in the process industry. TRIGUARD thermoplastic bars placed under the pipe and around u-bolts, when lateral pipe restraint is required, eliminate most metal to metal contact and therefore the resultant corrosion. With TRIGUARD, water no longer pools on pipe support surfaces under the pipe. Water runs off due to the TRIGUARD shape. TRIGUARD prevents electrical conductivity between the pipe and the pipe support member. TRIGUARD can be used at operating temperatures up to 250F (120C) and under all pipe diameters up to 48. TRIGUARD are available for higher temperature applications, however corrosion is generally not an issue on higher temperature piping systems. See our TRIBOLT product line for coated U-bolts to be used with TRIGUARD supports when lateral restraint is required.

    6219 Brittmoore Road, Houston, Texas 77041 Ph (713) 849-3366 Fax (713) 849-3654, www.aaatech.com

    AAA Technology & Specialties Co., Inc.


    TRIBOLTTM with UV Resistant Neoprene Coating
    TRIBOLTTM Neoprene Coated U-bolts provide the solution to corrosion resulting from for metal to metal contact and provide cathodic protection for your pipe support applications. U-bolts of any grade carbon steel with a painted or galvanized finish or 304/316 stainless steel can be supplied. Long tangent and specialty sizes are available as well. Coatings are ideal for FRP and GRE piping applications and have rubber grommets.

    VIBRATION CONTROL RESTRAINTS


    Vibration Control Restraints are utilized extensively throughout the gas compression industry to reduce structural borne vibration and noise levels, to distribute loading on the surface of the pipe and thereby minimize localized stress concentrations, to provide corrosion and cathodic protection and to facilitate pipe movement resulting from thermal expansion and contraction. Elastomeric bearing pads are securely bonded to the appropriate contact surfaces to provide the corrosion protection while damping the piping vibrations. The hold down clamps handle temperatures from -65F (-18C) to 350F (177C). Clamps are available in Light Duty, Standard Duty, Heavy Duty and Extra Heavy Duty. Innovative alternate hold down clamp designs as well as Wedge Blocks for use on compressor bottles are also available. All vibration control restraints are available for pipe diameters from to 60.

    CORROSION PREVENTATIVE METHODS FOR PIPE CLAMPS & STANDS


    Corrosion preventative metal surface dividers offered by AAA Technology include the following: Neoprene rubber, Elastomeric Bearing, PTFE (Glass Filled Teflon), Polyethylene Bearings, Thermoplastic Pads and Fiberglass Pads. Note that the PTFE and the Polyethylene Bearings provide a low friction sliding surface. Given your unique requirements for corrosion prevention as well as sliding support surfaces, we can engineer specific solutions for your requirements.

    6219 Brittmoore Road, Houston, Texas 77041 Ph (713) 849-3366 Fax (713) 849-3654, www.aaatech.com

    You might also like