2012

INTERNATIONAL MASTERS OF THE THEORETICAL & PRACTICAL APPLICATION OF FINITE ELEMENT METHOD AND CAE SIMULATION
Expert Module
Mechanical Branch Construction Branch

on-line Masters

Specialized Modules
Structure dynamic analysis Nonlinear structure analysis Heat transfer analysis Steel structures advanced analysis Fluid mechanics analysis Concrete structures advanced analysis Geotechnical analysis Low frequency electromagnetic analysis

Masters
Final Project. Best project awarded.

Since 1993

Mesh

Thermal analysis

Structural Analysis

Concrete-steel composite structure

Concrete Structure

Geotechnic

Expert, Specialist and Master levels

, S.A.

ETSI Industriales

18th International Masters of the Theoretical & Practical Application of the Finite Element Method and CAE Simulation

INGECIBER

INTRODUCTION
ETSII/UNED and Ingeciber began their partnership in 1993 by unifying their wide experience using numerical analysis methods in different research areas and professional engineering applications. The objective was, and still is, to prepare specialists in the use of Finite Element Method (FEM) and CAE Simulation for practical professional application. Specialists in FEM (university professors and Ingeciber expert engineers) have elaborated and designed a studying programme that finally has converged into the International Master of the Theoretical & Practical Application of the Finite Element Method and CAE Simulation. More than 2,500 postgraduates have participated in this Master course since then, which clearly demonstrates that the course has obtained wide prestige and recognition over the years. Committed to excellence in teaching, research and innovation, the Partnership is actively engaged with industry, governments and universities across the world in tackling some of the major challenges of today and tomorrow. We hope that you will consider undertaking our World-Leading Masters Degree course and achieve your full potential.

COURSE CONTENT
The multi-dimensional curriculum is aimed not just to acquiring knowledge but at developing critical thinking and analytical ability and facilitating research at every stage of the course. 1. Expert Module: provides the key understanding of the FEM, in order to have a solid foundation to further develop at more advanced levels. 2. Specialized Modules: provide a huge range of possibilities for in-depth analysis of different areas Concrete Advanced analysis . 3. The course offers three different degree options (Expert, Specialist and Masters) to pursue your training through core and elective subjects. through theoretical and practical knowledge: Dynamic, Non-Linear, Heat Transfer, Fluid Mechanics, Steel Structures and

ETSI Industriales

18th International Masters of the Theoretical & Practical Application of the Finite Element Method and CAE Simulation

INGECIBER

4.

A wide range of texts and practical exercises (english language) provide complete studying material.

5.

Practical learning is acomplished by using Patran/MSC Nastran, CivilFEM with Marc and CFD++ software (under educational license).

6.

The course uses the following tools: On-line virtual classrooms, videoconferences, technical forums, e-mail,on-line aditional support material, etc.

7.

Local collaborators will be available to give tutorials in different countries.

DEGREES
The following awards will be granted on successful completion of the different Masters levels:

Expert in theoretical and practical application of finite element method

(The
students must take Expert Module).

Specialist in theoretical and practical application of finite element method and simulation (The
students must take the Expert Module and one Specialized Module).

Masters in theory and practical application of finite element method and simulation
(The
students must take the Expert Module, one of the Specialized Modules Group and the Final Project).

Diplomas are issued by UNED university of Spain. To access this postgraduate course is required at least a EHEA bachelor's degree (grado EEES)

ROUTE
Participants who choose Mechanical Branch in the Expert Module, will use PATRAN / MSC NASTRAN software in Dynamic, Non-Linear and Heat Transfer specialized modules and CFD++ software in Fluid Mechanics specialized module. Participants who choose Construction Branch in the Expert module, will use CivilFEM with Marc in Dynamic, Non-Linear, Steel Structure and Concrete Advanced specialized modules.

ETSI Industriales

18th International Masters of the Theoretical & Practical Application of the Finite Element Method and CAE Simulation

INGECIBER

COURSE STRUCTURE
EXPERT MODULE (30 cts)
Teora FEM general General del MEF Theory 6 cts.
AF.1

FOUNDATION

Introduccin FEM a la Programation Programaci Programacin Introduction 3 cts.

AF.2

Clculo Numerical numrico Calculation 4 cts. AF.3

Leyes de Material Comportamiento Behaviour de materiales Laws 4 cts. AF.4

Mechanical brach(*)

Construction branch (*)

Curso Introduction Introductorio in the use of practical n aplicacin y software prctica 5 cts. AP.1

AP ICACION APLICACION APPLICATION

Curso Introduction Introductorio delin the use de programa of practicaly aplicacin software prctica 5 cts.
AP.1

T Computer-Aided ANSYS de engineering diseo techniques ordenador 4 cts. 4 cts.

AP.2

T Tcnicas de Computer-Aided modelado. engineering n Utilizacin del techniques mallado tico 4 cts.
AP.2

(*) To be chosen by the student

PRACTICALS

Pr cticas Prcticas Mechanical depractical Aplicaci Aplicacin software Ejemplos examples Mecnicos 4 cts.
AP.3

Prcticas Civil practical de Aplicaci software Ejemplos examples Civiles 4 cts. AP.3

SPECIALIZED MODULES (10 cts by module)

Module A Module B FEM theory Teora del MEF applied al Aplicadato nonlinear Clculo no structures Lineal de calculation Estructuras A.1 Module C FEM theory Teora del MEF applied a Aplicada to la heat Transferencia transfer de Calor B.1 C.1 Module E Module F Teora del MEF FEM theory Aplicada a la applied de Mecnica to fluidFluidos mechanics E.1 F.1 Module H Clculo Advanced avanzado calculation of de Estructuras concrete structures de Hormign H.1 H.1 Module I Teora del MEF FEM theory Aplicada a la applied de Mecnica to Geotechnics Fluidos I.1 Module J Clculo FEM theory avanzado applied to de Estructuras low frequency de Hormign electromagnetic analysis 4 cts. H.1 J.1

FOUNDATION

FEM Teora theory Teor del MEF applied al Aplicadato structure Anlisis An Dinmico de dynamic Din analysis Estructuras

Clculo Steel structure avanzado deadvanced Estructuras calculation Metlicas

4 cts.

4 cts.

4 cts.

4 cts.

4 cts.

4 cts.

4 cts.

APPLICATION

Introduction to lisis Dynamic Dinmico. analysis Aplicacin con with el programa depractical prcticas software

:Curso An to: Introduction Anlisis

Non-linear analysis Aplicacin con with el programa depractical prcticas cticas software

A.2

B.2

4 cts.

4 cts.

Curso de Introduction to: Transferencia Heat transfer analysis de Calor with Aplicacin con el practical programa desoftware prcticas C.2 4 cts.

Curso de Introduction to: Estructuras Steel structure Metlicas Met analysis with Aplicacin con practical el software programa de prcticas cticas E.2 4 cts.

Curso de Introduction to: Mecnica de Fluid mechanics Fluidos analysis with Aplicacin con practical elsoftware programa de prcticas F.2 4 cts.

Curso de Introduction to: Estructuras Concrete de Hormign structures Aplicacin con analysis with elpractical programa de prcticas cticas software H.2 H.2 4 cts.

Curso de Introduction to: Mecnica de Geotechnical Fluidos analysis with Aplicacin con practical elsoftware programa de prcticas I.2 4 cts.

Curso de Introduction to: Estructuras EMAG de Hormign analysis with Aplicacin con practical elsoftware programa de prcticas cticas H.2 J.2 4 cts.

PRACTICALS

Dynamic Prcticas Analysis de Anlisis Practices Dinmico

Non-linear Prcticas analysis de Anlisis No Lineales practices

Prcticas de Heat cticas transfer Transferencia practices de Calor B.3

Metallic Prcticas destructures Estructuras practices Metlicas E.3

Prcticas Fluid Mechanics de Mecnica de Fluidos practices F.3

Concrete Prcticas de Estructuras structure depractices Hormign H.3 H.3

Prcticas Geotechnical de Mecnica de Fluidos practices I.3

Prcticas Pr de Estructuras EMAG depractices Hormign H.3 J.3

2 cts.

A.3

2 cts.

2 cts.

C.3

2 cts.

2 cts.

2 cts.

2 cts.

2 cts.

SPECIALIZED MODULES GROUPS

- Structural: Construction Branch and A, B and E Modules - Construction: Construction Branch and A, B, E, H and I Modules* - Mechanical: Mechanical Branch and A, B, C, F and J Modules*
* Choose three of the five modules NOTE: I & J modules will not be available for students that have coursed the Master with Patran/MSC Nastran or CivilFEM with Marc respectively.

FINAL PROJECT MODULE (10 cts)

ETSI Industriales

18th International Masters of the Theoretical & Practical Application of the Finite Element Method and CAE Simulation

INGECIBER

TEACHING STAFF
Director
Mr. Juan Jos Benito Muoz. Construction Engineering and Manufacturing Department, School of Industrial Engineers, UNED University.

Coordinators
Mr. Miguel ngel Moreno Fdez. de Yepes. Manager, Ingeciber, S.A. Mr. Ambrosio Baos Abascal. Engineering Department, Ingeciber, S.A.

Professors
Dr. Enrique Alarcn lvarez. Civil Engineer PhD, UPM. Dr. Ramn lvarez Cabal. Industrial Engineer PhD, UPM. Dr. Juan Jos Benito Muoz. Industrial Engineer PhD, UNED. Dr. Enrique Lpez del Hierro Fernndez. Industrial Enginner PhD, UNED. Dr. Francisco Blzquez Garca, Industrial Enginner PhD. UPM Dr. Pablo de la Fuente Martn. Civil Enginner PhD, UPM. Dr. Luis Gavete Corvinos. Mine Engineer PhD, UPM. Dr. Julio Hernndez Rodrguez. Industrial Engineer PhD, UNED. Dr. Alberto Fraile de Lerma. Industrial Engineer PhD, UPM. Dr. Francisco Montans Leal. Industrial Engineer PhD, UPM. Dr. Ignacio del Rey Llorente. Industrial Engineer PhD, UPM Dr. Mariano Rodrguez-Avial Llardent. Industrial Engineer PhD, UNED. Dr. Eduardo Salete Daz. Civil Engineer PhD, UPM. Dr. Jos ngel Snchez Fernndez. Civil Engineer PhD, UPM. Dr. Jos M Sancho Aznal. Architect PhD, UPM.

Lecturers
Mr. Ambrosio Baos Abascal. MsC Science, Ingeciber, S.A. Mr. Rubn Establs Antn. Civil Engineer, Ingeciber, S.A. Dr. Juan Carlos Lancha. Civil Engineer PhD, O.H.L. Mr. Romn Martn Martn. Civil Engineer, Ingeciber, S.A. Dr. Miguel ngel Moreno Fdez. de Yepes. Civil Engineer PhD, Ingeciber, S.A. Mr. Walter Morf Triguero. Industrial Engineer, Ingeciber, S.A. Mr. Sergio de Rico Herrero. Industrial Engineer, Ingeciber, S.A. Dr. Eduardo Salete Casino. Civil Engineer PhD, Ingeciber, S.A. Dr. Eduardo Salete Daz. Civil Engineer PhD, Ingeciber, S.A. Mr. Ronald Siat. Civil Engineer, Ingeciber, S.A.

COURSE SECRETARY
Ingeciber, S.A.
Mrs. Constanza Pizarro. e-mail: [email protected] Mrs. Gema Ramos. e-mail: [email protected] Telephone: +34 91 386 22 22. Fax:+34 91 386 45 80 Avda. Monforte de Lemos, 189. 28035 Madrid. Spain

INGECIBER

ETSI Industriales

18th International Masters of the Theoretical & Practical Application of the Finite Element Method and CAE Simulation

INGECIBER

SCHEDULE
Registration deadline Opening Session by the end of January 2012 24 Mar 2012 26 Mar 2012 to 29 Oct 2012 02 Jul 2012 to 03 Dec 2012 26 Mar 2012 to 29 Oct 2012

Expert Module Speciality Modules Final Project Master Module

METHODOLOGY
The methodology applied is that of UNED University: Texts and practice software will be provided; Self-assessment and course assessment exercises will be made available; On-line Exams; The Master provides on-line virtual classrooms at the campus at UNED University.

FEES
Fees include: tuition, materials, shipping, software, examination and certification fees. Registration fees: Expert Module................................................................... 1,770.00 Specialized Modules..................................................... 590.00 / module Final Project Module...................................................... 590.00

ENROLMENT
Make your registration on-line:

www.uned.es/mastermef
Avda. Monforte de Lemos, 189 28035 Madrid (Spain) Tlfnos.: (+34) 91.386.22.22 Fax: (+34) 91.386.45.80 e-mail: [email protected]

More information on www.uned.es/mastermef