Termwise

Syllabus
2021-22

Chapter 10
Flow of
Control

Computer Science
Class XI ( As per CBSE Board)
 Control Statements

Flow control statements are used to control the flow of

execution depending upon the specified condition/logic.
Sequential control statement - Sequential execution is
when statements are executed one after another in order.
We don't need to do anything more for this to happen as
python compiler itself do it.
There are three types of control statements.
1. Decision Making Statements/If control statement
2. Iteration Statements (Loop control statement)
3. Jump Statements (break, continue, pass)
 Decision Making Statement

Decision making statement used to control

the flow of execution of program depending upon
condition.

There are three types of decision making

statement.
1. if statements
2. if-else statements
3. Nested if-else statement
 Decision Making Statement

1. if statements
An if statement is a programming conditional
statement that, if proved true, performs a
function or displays information.
 Decision Making Statement
1. if statements
Syntax:
if(condition):
statement
[statements]
e.g.
noofbooks = 2
if (noofbooks == 2):
print('You have ')
print(‘two books’)
print(‘outside of if statement’)
Output
You have two books
Note:To indicate a block of code in Python, you must indent each line of
the block by the same amount. In above e.g. both print statements are
part of if condition because of both are at same level indented but not
the third print statement.
 Decision Making Statement
2. if-else Statements
#find absolute value
a=int(input("enter a number"))
if(a<0):
a=a*-1
print(a)

#it will always return value in positive

 Decision Making Statement
1. if statements
Using logical operator in if statement
x=1
y=2
if(x==1 and y==2):
print(‘condition matcing the criteria')

Output :-
condition matcing the criteria
-----------------------------------------------------------
a=100
if not(a == 20):
print('a is not equal to 20')

Output :-
a is not equal to 20
 Decision Making Statement

2. if-else Statements
If-else statement executes some code if the test
expression is true (nonzero) and some other code if
the test expression is false.
 Decision Making Statement
2. if-else Statements
Syntax:
if(condition):
statements
else:
statements
e.g.
a=10
if(a < 100):
print(‘less than 100')
else:
print(‘more than equal 100')

OUTPUT
less than 100

*Write a program in python to check that entered numer is even or odd

 Decision Making Statement

3. Nested if-else statement

The nested if...else statement allows you to check
for multiple test expressions and execute different
codes for more than two conditions.
 Decision Making Statement
3. Nested if-else statement
Syntax
If (condition):
statements
elif (condition):
statements
else:
statements
E.G.
num = float(input("Enter a number: "))
if num >= 0:
if num == 0:
print("Zero")
else:
print("Positive number")
else:
print("Negative number")
OUTPUT
Enter a number: 5
Positive number
* Write python program to find out largest of 3 numbers.
 Decision Making Statement
3.Nested if-else Statements
#sort 3 numbers
first = int(input("Enter the first number: "))
second = int(input("Enter the second number: "))
third = int(input("Enter the third number: "))
small = 0
middle = 0
large = 0
if first < third and first < second:
small = first
if second < third and second < first:
small = second
else:
small = third
elif first < second and first < third:
middle = first
if second > first and second < third:
middle = second
else:
middle = third
elif first > second and first > third:
large = first
if second > first and second > third:
large = second
else:
large = third
print("The numbers in accending order are: ", small, middle, large)
 Decision Making Statement
3. Nested if-else Statements
#Check leap year / divisibility
year = int(input("Enter a year: "))

if (year % 4) == 0:
if (year % 100) == 0:
if (year % 400) == 0:
print("{0} is a leap year".format(year))
else:
print("{0} is not a leap year".format(year))
else:
print("{0} is a leap year".format(year))
else:
print("{0} is not a leap year".format(year))
 Iteration Statements (Loops)

Iteration statements(loop) are used to execute a block

of statements as long as the condition is true.
Loops statements are used when we need to run same
code again and again.
Python Iteration (Loops) statements are of three type: -

1. While Loop

2. For Loop

3. Nested For Loops

 Iteration Statements (Loops)
1. While Loop
It is used to execute a block of statement as long as a
given condition is true. And when the condition become
false, the control will come out of the loop. The condition
is checked every time at the beginning of the loop.
Syntax
while (condition):
statement
[statements]
e.g.
x=1 Output
while (x <= 4): 1
2
print(x) 3
x=x+1 4
 Iteration Statements (Loops)
While Loop continue
While Loop with Else
e.g.

x=1
while (x < 3):
print('inside while loop value of x is ',x)
x=x+1
else:
print('inside else value of x is ', x)

Output
inside while loop value of x is 1
inside while loop value of x is 2
inside else value of x is 3
*Write a program in python to find out the factorial of a given number
 Iteration Statements (Loops)
While Loop continue
Infinite While Loop
e.g.
x=5
while (x == 5):
print(‘inside loop')

Output
Inside loop
Inside loop
…
…
 Iteration Statements (Loops)
2. For Loop
It is used to iterate over items of any sequence, such as a list
or a string.
Syntax
for val in sequence:
statements

e.g.
for i in range(3,5):
print(i)

Output
3
4
 Iteration Statements (Loops)

2. For Loop continue

Example programs
for i in range(5,3,-1):
print(i)

Output
5
4
range() Function Parameters
start: Starting number of the sequence.
stop: Generate numbers up to, but not including this number.
step(Optional): Determines the increment between each numbers in
the sequence.
 Iteration Statements (Loops)

2. For Loop continue

Example programs with range() and len() function
fruits = ['banana', 'apple', 'mango']
for index in range(len(fruits)):
print ('Current fruit :', fruits[index])
range() with len() Function Parameters
 Iteration Statements (Loops)
2. For Loop continue
For Loop With Else
e.g.
for i in range(1, 4):
print(i)
else: # Executed because no break in for
print("No Break")

Output
1
2
3
No Break
 Iteration Statements (Loops)

2. For Loop continue

Nested For Loop
e.g.
for i in range(1,3):
for j in range(1,11):
k=i*j
print (k, end=' ')
print()

Output
1 2 3 4 5 6 7 8 9 10
2 4 6 8 10 12 14 16 18 20
 Iteration Statements (Loops)

2. For Loop continue

Factorial of a number
factorial = int(input(‘enter a number’))

# check if the number is negative, positive or zero

if num < 0:
print("Sorry, factorial does not exist for negative
numbers")
elif num == 0:
print("The factorial of 0 is 1")
else:
for i in range(1,num + 1):
factorial = factorial*i
print("The factorial of",num,"is",factorial)
 Iteration Statements (Loops)

2. For Loop continue

Compound Interest calculation
n=int(input("Enter the principle amount:"))
rate=int(input("Enter the rate:"))
years=int(input("Enter the number of years:"))

for i in range(years):
n=n+((n*rate)/100)
print(n)
 Iteration Statements (Loops)
3. Jump Statements

Jump statements are used to transfer

the program's control from one location to another. Means
these are used to alter the flow of a loop like - to skip a
part of a loop or terminate a loop

There are three types of jump statements used in python.

1. break
2. continue
3.pass
 Iteration Statements (Loops)
1. break
it is used to terminate the loop.
e.g.
for val in "string":
if val == "i":
break
print(val)

print("The end")

Output
s
t
r
The end
 Iteration Statements (Loops)
2. continue
It is used to skip all the remaining statements
in the loop and move controls back to the top of
the loop.
e.g.
for val in "init":
if val == "i":
continue
print(val)
print("The end")

Output
n
t
The end
 Iteration Statements (Loops)
3. pass Statement
This statement does nothing. It can be used when a
statement is required syntactically but the program
requires no action.
Use in loop
while True:
pass # Busy-wait for keyboard interrupt (Ctrl+C)
In function
It makes a controller to pass by without executing any code.
e.g.
def myfun():
pass #if we don’t use pass here then error message will be shown
print(‘my program')

OUTPUT
My program
 Iteration Statements (Loops)
3. pass Statement continue
e.g.
for i in 'initial':
if(i == 'i'):
pass
else:
print(i)

OUTPUT
n
t
a
L
NOTE: continue forces the loop to start at the next iteration
while pass means "there is no code to execute here" and
will continue through the remainder or the loop body.