0% found this document useful (0 votes)
198 views4 pages

MK4009GALTechnicalNotes RevA

Toshiba's MK4009GAL (HDD1622) and MK8009GAH (HDD1584) hard disk drives are a series of ultra-slim fast light weight 1. Inch Winchester disk drive. The drives are ATA-6 compliant.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
198 views4 pages

MK4009GALTechnicalNotes RevA

Toshiba's MK4009GAL (HDD1622) and MK8009GAH (HDD1584) hard disk drives are a series of ultra-slim fast light weight 1. Inch Winchester disk drive. The drives are ATA-6 compliant.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

TOSHIBA STORAGE DEVICE DIVISION MK4009GAL & MK8009GAH HDD INSTALLATION NOTES

2006 Toshiba America Information Systems, Inc. Contents subject to change without prior notice.

GENERAL DESCRIPTION Toshibas MK4009GAL (HDD1622) and MK8009GAH (HDD1584) hard disk drives are a series of ultra-slim fast light weight 1.8 inch Winchester disk drive. The drives are ATA-6 compliant.
SPECIFICATIONS FORMATTED CAPACITY HEIGHT WEIGHT NO. OF DISKS (PLATTERS) NO. OF DATA HEADS FUNCTIONAL SPECIFICATION LOGICAL DRIVE PARAMETERS NO. OF CYLINDERS (user) BYTES PER SECTOR BUFFER SIZE ROTATION SPEED (0.1%) TRANSFER RATE INTERNAL NO. OF CYLINDERS (logical) NO. OF HEADS (logical) NO. OF SECTORS/TRACK HOST TRANSFER RATE PIO/ULTRA DMA (ATA mode) SEEK TIME AVERAGE TRACK-TO-TRACK MAXIMUM TEMPERATURE OPERATING NON-OPERATING HUMIDITY
OPERATING/NON-OPERATING

MK4009GAL HDD1622 40.0GB 5mm 1.69oz (48g) 1 2

MK8009GAH HDD1584 80.0GB 8mm 2.08oz (59g) 2 4

MK4009GAL HDD1622 62,640 512 8MB

MK8009GAH HDD1584 62,640 512 2/8MB

4,200rpm 165.0 - 356.8 Mbits/sec. 16,383 16 63 16.6/100MB/s 15ms 3ms 26ms 41F - 140F (5C - 60C) -4F - 149F (-20C - 65C) 8 - 90% R.H. (No condensation) 5 - 90% R.H. (No condensation) 29C(operating)/40C(non-operating)

SHIPPING WET BULB

P/N 480077-A0 07/06

MK4009GAL/MK8009GAH Hard Disk Drive Installation Notes

UNPACKING PROCEDURE Visually inspect the shipping container prior to unpacking for any signs of damage to the container or its contents (the carrier is responsible for any damage incurred during shipment). Prior to opening the anti-static bag, it is recommended that the user ground himself with a ground strap or by touching the PC chassis or other metal object. Remove the drive from the anti-static bag and check it for damage. Save the shipping container and packing material for possible use later. HANDLING AND MOUNTING CONSIDERATIONS Installation and mounting of these drives is specific to the application environment. Handle drive only by the edges. When handling or mounting, take care not to apply any pressure to the top cover. Avoid subjecting the drive to excessive shock. Do not drop the drive, even a small distance onto a tabletop or other hard surface can damage drive. When mounting the drive, do so in such a fashion that the drive will be isolated from excessive shock. Do not mount in an environment where the temperature of the drives top cover will exceed 65C. (During operation, the temperature of the top cover can rise 15C above ambient). Do not disassemble, modify or repair drive. A rattle heard when the drive is moved is normal and not a sign of failure. INTERFACE CONNECTOR
Drive Side Connector Recommended host side FPC DDK Ltd, FF19A-40B-R11b 1. 2. 3. 4. 5. 6. Width: 20.50 0.07mm Thickness: 0.20 0.03mm Length: 90mm (max) Impedance: Typical 50ohm Plating: Gold over Nickel plating (note 1) Adhesive: Heat-hardened adhesive

Connector Durability (note 2) FPC Holding fource (note 3)

20 times Typ: 17[N] Min: 5[N]

* Do not pull out FPC with the connector locked. * Do not lock without FPC Notes: 1. To avoid Sn whisker 2. In horizontal direction with FPC of 0.20mm in thickness and with the same connector and FPC 3. In horizontal direction with FPC of 0.20mm in thickness and with the same connector and FPC after pulling out repeatedly

MK4009GAL/MK8009GAH Hard Disk Drive Installation Notes

P/N 480077-A0 07/06

FIGURE 1 INTERFACE CONNECTOR DEVELOPER SUPPORT Toshiba Storage Device Division (SDD) the industry pioneer in small form factor storage supports developers who are looking for small form factor HDDs that deliver the unbeatable combination of high-performance and high-capacity storage. Toshiba HDDs can be found under the hood of some of todays hottest portable products. If you are interested in discussing your product application with us please contact us. E-mail: [email protected] Phone: (949) 462-7502 Fax: (949) 588-7845 Web: http://developer.toshiba.com

P/N 480077-A0 07/06

MK4009GAL/MK8009GAH Hard Disk Drive Installation Notes

CONNECTOR CABLING INFORMATION


The following table describes all of the pins on the Task File Interface: PIN 1 3 5 7 9 11 13 15 17 19 21 23 25 SIGNALS RESERVED - RESET DD7 DD6 DD5 DD4 DD3 DD2 DD1 DD0 GROUND GROUND -DIOR -HDMARDY HSTROBE 27 IORDY -DMARDY DSTROBE 29 31 33 35 37 39 DMACK DA1 DA0 -CS0 - DASP +3.3V 30 32 34 36 38 40 INTRQ - PDIAG/-CBLID DA2 -CS1 +3.3V RESERVED 28 GROUND PIN 2 4 6 8 10 12 14 16 18 20 22 24 26 SIGNALS RESERVED GROUND DD8 DD9 DD10 DD11 DD12 DD13 DD14 DD15 DMARQ - DI0W STOP GROUND

Note: - in front of signal name indicates negative logic.

MK4009GAL/MK8009GAH Hard Disk Drive Installation Notes

P/N 480077-A0 07/06

You might also like