STERILIZATION OF

WATER USING
BLEACHING POWDER

ANMOLTRIPATHI
ANMOL TRIPATHI
XII A
24

Signature(Subject Teacher) Signature(Examiner)

1. Certificate
2. Acknowledgement
3. Introduction
 Need of Water
 Purification of Water
 Need for a stable purification technique
4. Theory
 History of Water purification
 Bleaching powder and its preparation
 Bleaching powder in Sterilization of water
5. Experiment
 Aim
 Pre-Requisite Knowledge
 Requirements
 Procedure
 Observation
 Calculations
6. Result
7. Day to Day Usage
8. Bibliography
 ANMOL
This is to certify that TANMOL TRIPATHI
B HATIA, a student of class XII has
ANISH TRIPATHI
successfully completed the research project on the topic
“Sterilization of Water by using Bleaching Powder” under the
guidance of Sanjay
Mr.RS
M . MSaxena
Sanjay Sir (Subject Teacher). This project is
Saxena
ONIKA JAIN
absolutely genuine and does not indulge in plagiarism of any
kind. The references taken in making this project have been
declared at the end of this report.

Signature
Mr. RS
(M Sanjay Saxena
. MONIKA JAIN)
(Subject Teacher)
I wish to express my deep gratitude and sincere thanks to PK SR.
CHANTAL
SINGH SIR (Principal), for providing infrastructure necessary for
successful completion of this project. I extend my hearty thanks
Sanjay
Mr.
to M . MSaxena
RSSanjay Sir (Chemistry Teacher), for her encouragement
Saxena
ONIKA JAIN
and for all the guidance that she provided for this project work. I
take this opportunity to express my deep sense of gratitude for
my parents for invaluable guidance, constant encouragement,
constructive comments, sympathetic attitude and immense
motivation which has sustained my effort at all stages of my life.
Need of water
Water is an important and essential ingredient in our quest for
survival on this planet. It is very essential for carrying out various
metabolic processes in our body and also to carry out
Hemoglobin throughout the body.

A daily average of 1 gallon per man is sufficient for drinking and

cooking purposes. With the increasing world population, the
demand for drinking water has also increased dramatically and
therefore it is very essential to identify resources of water from
which we can use water for drinking purposes. Since many
available resources of water do not have it in drinkable form, in
order to fulfill the demand of water, it needs to be purified and
supplied in an orderly and systematic way.
Purification of Water
There are many methods for the purification of water, such as:
1. Boiling
2. Filtration
3. Bleaching powder treatment
4. SODIS (Solar Water Disinfection)

Need for a stable purification technique

Therefore we need a purification technique which can be used
anytime and anywhere, does not require the use of any third
party content and which is also economically feasible on both
normal scale and large scale. Hence we look at the method of
purification of water using the technique of treatment by
bleaching powder commonly known as “Chlorination”.
In 1854 it was discovered that a cholera epidemic spread through
water. The outbreak seemed less severe in areas where sand
filters were installed. British scientist John Snow found that the
direct cause of the outbreak was water pump contamination by
sewage water. He applied chlorine to purify the water, and this
paved the way for water disinfection. This discovery led to
governments starting to install municipal water filters (sand
filters and chlorination). So in the 1890s America started building
large sand filters to protect public health. These turned out to be
a success. Instead of slow sand filtration, rapid sand filtration
was now applied. Subsequently, Dr. Fuller found that rapid sand
filtration worked much better when it was preceded by
coagulation and sedimentation techniques.

But the victory obtained by the invention of chlorination did not

last long. After some time the negative effects of this element
were discovered. Chlorine vaporizes much faster than water, and
it was linked to the aggravation and cause of respiratory disease.
Water experts started looking for alternative water disinfectants.
In 1902 calcium hypo chlorite and ferric chloride were mixed in a
drinking water supply in Belgium, resulting in both coagulation
and disinfection. To this day, bleaching powder remains the most
commonly used drinking water disinfectant. Almost all systems
use some type of chlorine-based process to disinfect water. In
addition to controlling disease-causing organisms, chlorination
offers a number of benefits including:
• Reduces many disagreeable tastes and odors
• Eliminates slime bacteria, molds and algae that commonly
grow in water supply reservoir
• Removes chemical compounds that have unpleasant tastes and
hinder disinfection
• Helps remove iron and manganese from raw water.

For more than a century, the safety of drinking water supplies

has been greatly improved by the addition of bleaching powder.
However, bleaching powder also reacts with the organic matter,
naturally present in water, such as decaying leaves thus forming
a group of chemicals known as disinfection by-products. When
used with modern water filtration methods, chlorine is effective
against virtually all microorganisms. Bleaching powder is easy to
apply and small amounts of the chemical remain in the water as
it travels in the distribution system from the treatment plant to
the consumer’s tap, thus ensuring prevention of
recontamination of water.

But what is bleaching powder and how is it prepared?

Bleaching powder or Calcium hypochlorite is a chemical
compound with formula Ca(ClO)2. This chemical is considered to
be relatively stable and has greater available chlorine than
sodium hypochlorite (liquid bleach). It is prepared by either
calcium process or sodium process.

Calcium Process
2Ca(OH)2 + 2 Cl2 Ca(ClO)2 + CaCl2 + 2 H2O

Sodium Process
2Ca(OH)2 + 3Cl2 + 2NaOH Ca(ClO)2 + CaCl2 + 2H2O + 2NaCl

What are the actual processes involved in disinfecting and

purifying water?
The combination of following processes is used for municipal
drinking water treatment worldwide:
1. Pre-chlorination - for algae or any biological growth control
2. Aeration - removal of dissolved iron and manganese
3. Coagulation - for flocculation
4. Coagulant aids also known as polyelectrolyte’s - to improve
coagulation and for thicker floc formation
5. Sedimentation - for solids separation i.e. removal of
suspended solids trapped in the floc
6. Filtration - for removal of carried over floc
7. Disinfection - for killing bacteria

Out of these processes, the role of Bleaching powder is only in

the last step i.e. for Disinfection of water.
Aim: To determine the dosage of
bleaching powder required for
sterilization or disinfection of different
samples of water.

Requirements: Burette, titration flask, 100ml

graduated cylinder, 250ml measuring flask, weight
box, glazed tile, glass wool. Bleaching Powder, Glass
wool, 0.1 N Na2S2O3 solution, 10% KI solution, different
samples of water, starch solution.

Pre-Requisite Knowledge:
1. Bleaching powder when dissolved in contains dissolved
chlorine, liberated by the action of bleaching powder with water.
Ca(OCl)2+H20 Ca(OH)2+Cl2

2. The amount of Chlorine present is determined by treating a

known volume with excess of 10% KI solution, when equivalent
amount of I2 is liberated. The I2, thus liberated is then estimated
by titrating it against a standard solution of Sodium thiosulphate,
using starch solution as indicator.
Cl2+2KI 2KCl+I2
2Na2S2O3 I2+ Na2S4O6+2NaI
Procedure:

1. Preparation of bleaching
powder solution Weigh accurately
2.5g bleaching powder and transfer it
to a 250ml conical flask. Add about
100ml of distilled water. Stopper the
flask and shake it vigorously. The
suspension thus obtained is filtered
through glass wool and the filtrate is
diluted with water to make the
volume 250ml. The solution obtained is 1% bleaching powder
solution.
2. Take 20ml of bleaching powder solution in a stoppered
conical flask and add it to 20ml of 10% KI solution. Stopper the
flask and shake it vigorously. Titrate this solution against 0.1N
Na2S2O3 solution taken in the burette. When the solution in the
conical flask becomes light yellow in color, add about 2ml starch
solution. The solution now becomes blue in color. Continue
titrating till the blue color just disappears. Repeat the titration to
get a set of three concordant readings.
Observation:
 Volume of bleaching powder sol. taken 20ml
 Volume of KI solution added 20ml
 Volume of different samples of water 100ml
Titration Table for Distilled Water

Sr.No. Initial Final Final Vol. of 0.2N Mean Vol. (ml)

Reading Reading Na2S4O6 sol. Used
(ml)
1. 2.0 10.1 8.1
2. 10.1 18.4 8.3 8.2
3. 18.4 26.6 8.2

Titration Table for Tank Water

Sr.No. Initial Final Final Vol. of 0.2N Mean Vol. (ml)

Reading Reading Na2S4O6 sol. used
(ml)
1. 15.1 25.2 10.1
2. 25.2 35.2 10.0 10.1
3. 35.2 45.4 10.2

Titration Table for Pond Water

Sr.No. Initial Final Final Vol. of 0.2N Mean Vol. (ml)
Reading Reading Na2S4O6 sol. used
(ml)
1. 7.2 12.1 4.9
2. 12.1 16.9 4.8 4.8
3. 16.9 21.9 4.7

Calculations:
TANK WATER (Sample I)

Amount of bleaching powder used to disinfect 100ml of tap

water = (8.2 – 10.1) ml of 0.2 N of Na2S4O6 solution
= 1.9ml. Of 0.2 N of Na2S4O6 solution
Since, 250ml bleaching powder solution contains 2.5g bleaching
powder
Thus, 1ml of bleaching powder solution contains bleaching
powder =2.5/250 = 0.01g
Also, 20ml of bleaching powder solution = 8.2ml of 0.2N of
Na2S2O3
So 1ml of Na2S2O3 solution = 20/8.2 ml of bleaching powder
solution.
Volume of bleaching powder solution used to disinfect 100ml of
water = 1.9x20/8.2ml.

1.9 x 20/8.2 ml. of bleaching powder solution

=1.9x20x0.01/8.2 (gm) Bleaching Powder

Amount of bleaching powder used to disinfect 1 ltr. of water

= 1.9x20x0.01x1000/8.2x100
= 0.4634gm

POND WATER (Sample II)

Amount of bleaching powder used to disinfect 100ml of water.

= (8.2 – 4.8) ml of 0.2 N Na2S2O3 solution
= 3.4ml
Accordingly,
Volume of Ca(OCl)2 solution required to disinfect 1lt. of water
= 3.4x20x0.01x1000/8.2x100
= 0.8293 gm.
Amount of the given samples of bleaching powder required to
disinfect one liter of water:-
Samples I = 0.4634gm
Samples II = 0.8293 gm

Since amount of bleaching powder required for disinfecting

POND WATER is more than that required for TANK WATER, thus
it can be concluded that former contains more impurities.
While household bleaching solutions are widely available
but it is not recommended to use it for household water
treatment. If bleach is used for household water treatment
system, concentration should be regularly checked and
proper dosage strategy should be developed
recommended by authorized organizations.

Bleaching Powder water treatment is useful in disinfecting

water in places or conditions where boiling method cannot
be practiced.
1. google.com

2. wikipedia.org

3. vlib.us

4. toppersarena.com

5. jmooneyham.com

6. ianrpubs.unl.edu