EXHAUST

LINES

2019 PARTS GUIDE allianceparts.com

INTRODUCTION

INTRODUCTION
ALL–MAKES HEAVY–DUTY EXHAUST LINES

With parts and accessories for all makes and models1, Alliance Parts is the smartest choice for value on the road.
Readily available, easily affordable and assured in quality, Alliance has everything you need to deliver.

PARTS NUMBERING SYSTEM

All part numbers in this program contain the prefix ABP and either N35 or N49 (the company-assigned code for
this program). The remaining digits are based on part and design.

Example – ABP N35 50PLS

All Alliance Parts products in the catalog are set up with an Alliance part number. In the back of this catalog, you
will find an extensive cross-reference list. This will help link another manufacturer’s part to an Alliance ABP number.

WARRANTY

Alliance products are backed by a 1–year/unlimited–mile standard warranty.

Illustrations and photographs used in this catalog may vary slightly from the actual product. Prototype samples are sometimes used for photography.
The production parts may vary slightly.
Availability of products shown in this catalog is subject to change without notice.
1
For nearly all heavy–duty truck makes and models.

2019 | ALLIANCE PARTS EXHAUST LINES 2

TABLE OF CONTENTS

TABLE OF CONTENTS
BELLOWS
1 EPA10/TIER 4 “ZERO–LEAK” BELLOWS....................................................................................................... 5

SPLITTER TEE ADAPTERS

2 SPLITTER TEE ADAPTERS............................................................................................................................... 7

STACKS
3 CURVED STACKS. . .............................................................................................................................................. 9
STRAIGHT STACKS.......................................................................................................................................... 10
MITERED STACKS. . .............................................................................................................................................11

ELBOWS
4 90–DEGREE ELBOWS......................................................................................................................................13
45–DEGREE ELBOWS . . .....................................................................................................................................14
67–DEGREE (PETE) ELBOWS. . ....................................................................................................................... 15

TAIL PIPES
5 TAIL PIPES ......................................................................................................................................................... 17

EXHAUST CLAMPS
6 PRE–FORMED LAP–JOINT WIDE BAND CLAMPS. . ................................................................................... 19
PRE–FORMED BUTT–JOINT WIDE BAND CLAMPS.. ..................................................................................21
FLAT BAND CLAMPS WITH HARDWARE. . .................................................................................................. 22
NARROW BAND CLAMPS.. .............................................................................................................................23
DUAL NARROW BAND CLAMPS. . .................................................................................................................24
U–BOLT CLAMPS..............................................................................................................................................25
GUILLOTINE CLAMPS. . .................................................................................................................................... 26
MUFFLER GUARD & HEAT SHIELD CLAMPS. . ............................................................................................ 27
INSTALLATION INSTRUCTIONS.................................................................................................................... 28

FLEX HOSES
7 FLEX HOSES. . ................................................................................................................................................... 30
STANDARD FLEX TUBING...............................................................................................................................31

CROSS–REFERENCE
8 CROSS–REFERENCE . . ......................................................................................................................................33

2019 | ALLIANCE PARTS EXHAUST LINES 3

 EXHAUST LINES

BELLOWS
BELLOWS
1

EPA1O/TIER 4 “ZERO–LEAK” BELLOWS

SPECIFICATIONS

Finish 300 stainless steel

Inlet/Outlet Diameters 2.5–5 in
Lengths 12–18 in
Hardware Clamps, brackets & gaskets (where required)
Types Torsional, EGR & long assemblies
Coverage All major OEM brands

FEATURES & BENEFITS

• A true three-layered bellows with all the benefits of a proprietary unit

• Meets and exceeds EPA10/Tier 4 requirements
• Reverse–compatible for use in 2007 applications
• Each bellows is built with the prior OE modifications
• Improved OE design results in faster installation times and lower replacement costs

PART NUMBERS

ALLIANCE P/N O.D. LENGTH TYPE ALLIANCE P/N

4” 4” 12.6” – ABP N49 PB0320

4” 4” 13.2” – ABP N49 PB0405
4” 4” 15.9” – ABP N49 KW0330
4” 4” 12.6” Torsional ABP N49 KW3541
2.5” 2.5” 13.8” EGR ABP N49 KW6559
4” 4” 16” – ABP N49 F28578
5” 5” 14” – ABP N49 F28675
5” 5” 16.5” – ABP N49 F28522
4” 4” 16” – ABP N49 F25023
5” 5” 18” – ABP N49 F27334
4” 4” 16” – ABP N49 F26374
4” 4” 14” – ABP N49 F27252
4” 4” 13.5” Torsional ABP N49 BB716131
4” 5” 17.7” – ABP N49 V28534
4” 4” 17.7” – ABP N49 V28536
5” 5” 15.9” – ABP N49 V28532
4” 4” 14.5” Long Assembly ABP N49 I67C91
4” 4” 13” Long Assembly ABP N49 I1154C1
4” 4” 12” Long Assembly ABP N49 I462C5

O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 5

 EXHAUST LINES

SPLITTER TEE
ADAPTERS
SPLITTER TEE ADAPTERS
2

SPLITTER TEE ADAPTERS

SPECIFICATIONS

Pipe Diameters 4–5 in

Finishes Aluminized steel & chrome-plated
Hardware None

FEATURES & BENEFITS

• Convert any single exhaust system into a dual system

• Parts are manufactured to fit most exhaust systems
• Available in aluminized steel or chrome–plated

PART NUMBERS

DIAMETER LENGTH ALUMINIZED STEEL CHROME–PLATED

4” 18.5” ABP N49 40TA –

5” 25” ABP N49 50TA ABP N49 50TC

2019 | ALLIANCE PARTS EXHAUST LINES 7

 EXHAUST LINES

STACKS
STACKS
3

CURVED STACKS
SPECIFICATIONS

Pipe Diameters 4–5 in

Finishes Aluminized steel & chrome-plated
Lengths 18–96 in
Types I.D. slotted with flared bottoms & O.D.
Country of Origin U.S.

FEATURES & BENEFITS

• Dual-nickel-plated for rust resistance

PART NUMBERS

I.D.

DIAMETER LENGTH ALUMINIZED STEEL CHROME–PLATED

5” 18” ABP N49 50CS118A ABP N49 50CS118C

5” 24” ABP N49 50CS124A ABP N49 50CS124C
5” 36” – ABP N49 50CS136C
5” 48” ABP N49 50CS148A ABP N49 50CS148C
5” 60” ABP N49 50CS160A ABP N49 50CS160C
5” 72” – ABP N49 50CS172C
5” 84” – ABP N49 50CS184C
5” 96” – ABP N49 50CS196C

O.D.

DIAMETER LENGTH ALUMINIZED STEEL CHROME–PLATED

4” 24” ABP N49 40CS224A ABP N49 40CS224C

4” 36” ABP N49 40CS236A ABP N49 40CS236C
4” 48” ABP N49 40CS248A ABP N49 40CS248C
4” 60” ABP N49 40CS260A ABP N49 40CS260C
5” 18” ABP N49 50CS218A ABP N49 50CS218C
5” 24” ABP N49 50CS224A ABP N49 50CS224C
5” 36” ABP N49 50CS236A ABP N49 50CS236C
5” 48” ABP N49 50CS248A ABP N49 50CS248C
5” 60” ABP N49 50CS260A ABP N49 50CS260C
5” 72” ABP N49 50CS272A ABP N49 50CS272C

I.D. – Inner Diameter | O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 9

STACKS
3

STRAIGHT STACKS
SPECIFICATIONS

Pipe Diameter 5 in
Finish Chrome-plated
Lengths 18–72 in
Type O.D.
Country of Origin U.S.

PART NUMBERS

O.D.

DIAMETER LENGTH CHROME–PLATED

5” 18” ABP N49 50S218C

5” 24” ABP N49 50S224C
5” 36” ABP N49 50S236C
5” 48” ABP N49 50S248C
5” 60” ABP N49 50S260C
5” 72” ABP N49 50S272C

O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 10

STACKS
3

MITERED STACKS
SPECIFICATIONS

Pipe Diameters 4–5 in

Finishes Aluminized steel & chrome-plated
Lengths 36–96 in
Type O.D.
Country of Origin U.S.

PART NUMBERS

O.D.

DIAMETER LENGTH ALUMINIZED STEEL CHROME–PLATED

4” 36” – ABP N49 40MS236C

4” 48” – ABP N49 40MS248C
5” 36” ABP N49 50MS236A ABP N49 50MS236C
5” 48” ABP N49 50MS248A ABP N49 50MS248C
5” 60” – ABP N49 50MS260C
5” 72” – ABP N49 50MS272C
5” 84” – ABP N49 50MS284C
5” 96” – ABP N49 50MS296C

O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 11

 EXHAUST LINES

ELBOWS
ELBOWS
4

9O–DEGREE ELBOWS
SPECIFICATIONS

Connection Sizes 4–5 in

Finishes Aluminized steel & chrome-plated
Lengths 6–18 in
Center Line Radiuses 6 & 8 in
Types I.D./O.D. (long) & O.D./O.D. (long & short)
Country of Origin U.S.

PART NUMBERS

I.D./O.D.
CENTER LINE
TYPE SIZE LEG LENGTH ALUMINIZED STEEL CHROME–PLATED
RADIUS

Long 4” 10” 6” ABP N49 40EL90116A –

Long 4” 18” 6” ABP N49 40EL90117A ABP N49 40EL90117C
Long 4” 6” 4” ABP N49 40EL90118A –
Long 5” 15” 8” ABP N49 50EL90120A ABP N49 50EL90120C
Long 5” 18” 8” ABP N49 50EL90121A –
Long 5” 10” 8” ABP N49 50EL90123A ABP N49 50EL90123C
Long 5” 18” 8” – ABP N49 50EL90124C

O.D./O.D.
CENTER LINE
TYPE SIZE LEG LENGTH ALUMINIZED STEEL CHROME–PLATED
RADIUS

Long 4” 12” 6” ABP N49 40EL90219A –

Long 4” 18” 6” ABP N49 40EL90217A –
Long 5” 15” 8” ABP N49 40EL90220A ABP N49 40EL90220C
Long 5” 20” 8” ABP N49 50EL90224A –
Short 5” 10” 5.5” ABP N49 50EL90243A ABP N49 50EL90243C
Short 5” 10” x 16” 5.5” ABP N49 50EL90244A ABP N49 50EL90244C
Short 5” 8.5” 5.5” ABP N49 50EL90122A ABP N49 50EL90122C

I.D. – Inner Diameter | O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 13

ELBOWS
4

45–DEGREE ELBOWS
SPECIFICATIONS

Connection Sizes 4–5 in

Finishes Aluminized steel & chrome-plated
Lengths 8–15 in
Center Line Radiuses 6 & 8 in
Types I.D./O.D. & O.D./O.D.
Country of Origin U.S.

FEATURES & BENEFITS

• 45–degree elbows fit most applications

PART NUMBERS

I.D./O.D.
CENTER LINE
SIZE LEG LENGTH ALUMINIZED STEEL CHROME–PLATED
RADIUS

4” 8” 6” ABP N49 40EL45103A –

4” 12” 6” ABP N49 40EL45104A –
5” 8” 8” ABP N49 50EL45105A –
5” 15” 8” ABP N49 50EL45106A ABP N49 50EL45106C

O.D./O.D.
CENTER LINE
SIZE LEG LENGTH ALUMINIZED STEEL CHROME–PLATED
RADIUS

4” 8” 6” ABP N49 40EL45203A –

4” 12” 6” ABP N49 40EL45204A –
5” 15” 8” ABP N49 50EL45205A ABP N49 50EL45205C

I.D. – Inner Diameter | O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 14

ELBOWS
4

67–DEGREE (PETE) ELBOWS

SPECIFICATIONS

Connection Size 5 in
Finishes Aluminized steel & chrome-plated
Length 11 x 7.8 in
Center Line Radius 6 in
Type O.D./O.D.
Country of Origin U.S.

FEATURES & BENEFITS

• 67–degree elbows fit most applications

PART NUMBERS

O.D./O.D.
CENTER LINE
SIZE LEG LENGTH ALUMINIZED STEEL CHROME–PLATED
RADIUS

5” 11” x 7.8” 6” ABP N49 50EL67250A ABP N49 50EL67250C

O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 15

EXHAUST LINES

TAIL
PIPES
TAIL PIPES
5

TAIL PIPES
SPECIFICATIONS

Pipe Diameters 4–5 in

Finishes Aluminized steel & chrome-plated
Lengths 18 & 24 in
Type O.D.
Country of Origin U.S.

FEATURES & BENEFITS

• Extends piping length beyond cargo beds and trailers

• Standard fit to most OEM applications

PART NUMBERS

DIAMETER LENGTH ALUMINIZED STEEL CHROME–PLATED

4” 18” ABP N49 40TS118A ABP N49 40TS118C

4” 24” ABP N49 40TS124A –
5” 18” ABP N49 50TS118A ABP N49 50TS118C
5” 24” ABP N49 50TS124A –

O.D. – Outer Diameter

2019 | ALLIANCE PARTS EXHAUST LINES 17

 EXHAUST LINES

EXHAUST
CLAMPS
EXHAUST CLAMPS
6

PRE–FORMED LAP–JOINT WIDE BAND CLAMPS

SPECIFICATIONS

Band Width 3 in (76.2 mm)

Finishes Aluminized steel, 304 stainless steel & polished stainless steel
Diameter Range 2–6 in (50.8–152.4 mm)
Hardware Included with clamp

FEATURES & BENEFITS

• Pre–formed wide band exhaust clamp with step is designed for fast, easy and accurate installation
• Specific OEM and service designs
• Compatible with pipes, flex and mufflers
• Durable installation without damage to pipe ends
• Original reaction block technology for 360–degree seal
• Pre–attached hardware
• High–strength plated fasteners

PART NUMBERS

SIZE ALUMINIZED STEEL 304 STAINLESS STEEL POLISHED STAINLESS STEEL

2.5” ABP N35 25PLA ABP N35 25PLS –

3.0” ABP N35 30PLA ABP N35 30PLS –
3.5” ABP N35 35PLA ABP N35 35PLS –
4.0” ABP N35 40PLA ABP N35 40PLS ABP N35 40PLB
5.0” ABP N35 50PLA ABP N35 50PLS ABP N35 50PLB
6.0” ABP N35 60PLA ABP N35 60PLS ABP N35 60PLB

2019 | ALLIANCE PARTS EXHAUST LINES 19

EXHAUST CLAMPS
6

PRE–FORMED LAP–JOINT WIDE BAND CLAMPS

SPECIFICATIONS

Band Width 3 in (76.2 mm)

Finishes Aluminized steel, 304 stainless steel & polished stainless steel
Diameter Range 2–6 in (50.8–152.4 mm)
Hardware Included with clamp

FEATURES & BENEFITS

• Pre–formed wide–band exhaust clamp with step is designed for fast, easy and accurate installation
• Specific OEM and service designs
• Compatible with pipes, flex and mufflers
• Durable installation without damage to pipe ends
• Original reaction block technology for 360–degree seal
• Pre–threaded nut bar provides tightening with only one assembly tool
• High–strength plated fasteners
• Pre–attached hardware
• High–temperature gasket provides increased sealing

PART NUMBERS

SIZE ALUMINIZED STEEL 304 STAINLESS STEEL POLISHED STAINLESS STEEL

3.0” ABP N35 30PLAG ABP N35 30PLSG –

3.5” ABP N35 35PLAG ABP N35 35PLSG –
4.0” ABP N35 40PLAG ABP N35 40PLSG ABP N35 40PLBG
5.0” ABP N35 50PLAG ABP N35 50PLSG ABP N35 50PLBG

2019 | ALLIANCE PARTS EXHAUST LINES 20

EXHAUST CLAMPS
6

PRE–FORMED BUTT–JOINT WIDE BAND CLAMPS

SPECIFICATIONS

Band Width 2.97 in (75.4 mm)

Finish Bright finish 304 stainless steel
Diameter Range 2–6 in (50.8–152.4 mm)
Hardware Included with clamp

FEATURES & BENEFITS

• Pre–formed butt–joint wide band clamp is used for joining exhaust members of the same diameter
• Compatible with pipes, flex and mufflers
• Durable installation without damage to pipe ends
• Original reaction block technology for 360–degree seal
• Pre–threaded nut bar provides easy and accurate installation
• High–strength plated fasteners

PART NUMBERS

SIZE BRIGHT FINISH 304 STAINLESS STEEL

3.5” ABP N35 35PBA

4.0” ABP N35 40PBA
5.0” ABP N35 50PBA

2019 | ALLIANCE PARTS EXHAUST LINES 21

EXHAUST CLAMPS
6

FLAT BAND CLAMPS WITH HARDWARE

SPECIFICATIONS

Band Width 2.97 in (75.4 mm)

Finish Bright finish 304 stainless steel
Diameter Range 2–6 in (50.8–152.4 mm)
Hardware Included with clamp

FEATURES & BENEFITS

• Join exhaust members of the same diameter

• Compatible with pipes, flex and mufflers
• High–strength, plated Grade 8 fasteners
• Bright finish, corrosion resistant, stainless steel band for long life
• Original inverted reaction block technology creates a complete inner circle seal when clamp is secured
• Pre–attached hardware for fast, easy and accurate installation

PART NUMBERS

SIZE BRIGHT FINISH 304 STAINLESS STEEL

2.0” ABP N35 20EST

2.25” ABP N35 22EST
2.5” ABP N35 25EST
2.75” ABP N35 27EST
3.0” ABP N35 30EST
3.5” ABP N35 35EST
4.0” ABP N35 40EST
5.0” ABP N35 50EST
6.0” ABP N35 60EST

2019 | ALLIANCE PARTS EXHAUST LINES 22

EXHAUST CLAMPS
6

NARROW BAND CLAMPS

SPECIFICATIONS

Band Width 1.25 in (31.8 mm)

Finish Aluminized steel
Diameter Range 3.5–5.22 in (88.9–136.2 mm)
Hardware Included with clamp

FEATURES & BENEFITS

• Provides joint serviceability

• Pre–attached hardware for fast, easy and accurate installation
• Durable installation without damage to pipe ends
• Superior clamp load capability
• Reaction block technology provides a full 360–degree equal distribution of stretching force, prohibiting
pipe distortion
• Complete seal around joined exhaust components

PART NUMBERS

SIZE ALUMINIZED STEEL

3.5” ABP N35 A35AF

4.0” ABP N35 100425
5.0” ABP N35 100725

2019 | ALLIANCE PARTS EXHAUST LINES 23

EXHAUST CLAMPS
6

DUAL NARROW BAND CLAMPS

SPECIFICATIONS

Individual: 1.25 in (31.8 mm)

Band Width
Overall: 2.75 in (70 mm)
Finishes Aluminized steel & 304 stainless steel
Diameter Range 3.5–5.22 in (88.9–136.2 mm)
Hardware Pre–attached with clamp

FEATURES & BENEFITS

• Provides joint serviceability without damage to pipe ends

• Superior clamp load capability
• Pre–attached hardware for fast, easy and accurate installation
• Pairing available in all combinations of aluminized steel and 304 stainless steel
• Reaction block technology provides a full 360–degree equal distribution of stretching force, prohibiting
pipe distortion
• Complete seal around joined exhaust components

PART NUMBERS

SIZE ALUMINIZED STEEL/304 STAINLESS STEEL

4.0” ABP N35 04 20289 001

5.0” ABP N35 04 20289 000

2019 | ALLIANCE PARTS EXHAUST LINES 24

EXHAUST CLAMPS
6

U–BOLT CLAMPS
SPECIFICATIONS

Closed: 4–6 in
Sizes
Open: 4–5 in
Finishes Steel–, zinc– and chrome–plated
U-bolt Composition 3/8–16 UNC 2A threads C1018
Saddle 1008 HRPO 11 gauge
Types Double saddle closed (flat) & open (round) ends
Country of Origin U.S.

FEATURES & BENEFITS

• Heavy–duty 360–degree seal

• Double-edge saddle provides superior strength

PART NUMBERS

DOUBLE SADDLE CLOSED WITH FLAT U–BOLT

SIZE ZINC–PLATED CHROME–PLATED

4” ABP N35 400UBFZ ABP N35 400UBFC

5” ABP N35 500UBFZ ABP N35 500UBFC
6” ABP N35 600UBFZ ABP N35 600UBFC

DOUBLE SADDLE OPEN WITH ROUND U–BOLT

SIZE ZINC–PLATED STEEL

4” ABP N35 400UBRZ ABP N35 400UBRS

5” ABP N35 500UBRZ ABP N35 500UBRS

2019 | ALLIANCE PARTS EXHAUST LINES 25

EXHAUST CLAMPS
6

GUILLOTINE CLAMPS
SPECIFICATIONS

Sizes 3–6 in
Finishes Steel–, zinc– and chrome–plated
U-bolt Composition 3/8–16 UNC 2A threads C1018
Saddle 1008 HRPO 11 gauge
Types Flat & round bolt
Country of Origin U.S.

FEATURES & BENEFITS

• Heavy–duty 360–degree seal

• Double-edge saddle provides superior strength

PART NUMBERS

GUILLOTINE CLAMP WITH FLAT U–BOLT

SIZE ZINC–PLATED CHROME–PLATED

3” ABP N35 300GCFZ –

3.5” ABP N35 350GCFZ –
4” ABP N35 400GCFZ ABP N35 400GCFC
5” ABP N35 500GCFZ ABP N35 500GCFC
6” ABP N35 600GCFZ ABP N35 600GCFC

GUILLOTINE CLAMP WITH ROUND U–BOLT

SIZE STEEL CHROME–PLATED

3” ABP N35 300GCRS –

3.5” ABP N35 350GCRS –
4” ABP N35 400GCRS ABP N35 400GCRC
5” ABP N35 500GCRS ABP N35 500GCRC

2019 | ALLIANCE PARTS EXHAUST LINES 26

EXHAUST CLAMPS
6

MUFFLER GUARD & HEAT SHIELD CLAMPS

SPECIFICATIONS

Band Width Varies by application

Finishes Aluminized steel, 409 & 430 polished stainless steel
Configuration Varies by application

FEATURES & BENEFITS

• Simple, multifunction unitized clamp and bracket clamping system effectively mounts or suspends exhaust
system components
• Mechanically joined stirrups with contained nuts provide attachment for shields
• Clamp band positioned behind bracket to secure mounted mass
• Application–specific, low–mass brackets engineered for mounting strength and ease of system assembly
• Plated, high–strength, pre–attached English or metric hardware

PART NUMBERS

DAIMLER TRUCK APPLICATION ALLIANCE P/N

– ABP N35 20 0008

TCP200009 ABP N35 20 0009
04–18866–000 ABP N35 04 18866 000
04–20769–000 ABP N35 04 20769 000
12–14741–000 ABP N35 12 14741 000
04–18866–001 ABP N35 04 18866 001
– ABP N35 X1100A
– ABP N35 Z1100A

Brackets are application– and customer–specific and may not be available for sale with band clamp system clamp load.

2019 | ALLIANCE PARTS EXHAUST LINES 27

EXHAUST CLAMPS
6

INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS

1 | CENTER CLAMP
Center clamp around the joint.

2 | INSERT BOLTS
Insert bolts through the clamp end, force bar and install nuts.

3 | TIGHTEN CLAMP
Tighten clamp from either side. Torque to 45–60 lb–ft (60–80 nm).

2019 | ALLIANCE PARTS EXHAUST LINES 28

 EXHAUST LINES

FLEX
HOSES
FLEX HOSES
7

FLEX HOSES
SPECIFICATIONS

Hose Diameters 4–5 in

Finishes Aluminized steel, galvanized steel & 304 stainless steel
Type Standard pre–cut
Unit of Measure Each

FEATURES & BENEFITS

• 304 stainless steel hoses offer excellent heat and corrosion resistance
• Aluminized steel has reasonable heat and corrosion resistance and can be used when a more economical grade of
steel is required
• Galvanized steel has lower heat resistance and corrosion resistance, it can be used when a low–cost flexible hose
is required
• All metal hoses are measured in the relaxed/installed position that is halfway between fully compressed and fully
extended, providing 10% greater product yield

PART NUMBERS

STANDARD PRE–CUT HOSE

DIAMETER LENGTH ALUMINIZED STEEL GALVANIZED STEEL STAINLESS STEEL

4” 12” ABP N49 4FT12A ABP N49 4FT12G ABP N49 4FT12S
4” 18” ABP N49 4FT18A ABP N49 4FT18G ABP N49 4FT18S
4” 20” ABP N49 4FT20A ABP N49 4FT20G ABP N49 4FT20S
4” 24” ABP N49 4FT24A ABP N49 4FT24G ABP N49 4FT24S
4” 30” ABP N49 4FT30A ABP N49 4FT30G ABP N49 4FT30S
4” 36” ABP N49 4FT36A ABP N49 4FT36G ABP N49 4FT36S
5” 12” ABP N49 5FT12A ABP N49 5FT12G ABP N49 5FT12S
5” 18” ABP N49 5FT18A ABP N49 5FT18G ABP N49 5FT18S
5” 20” ABP N49 5FT20A – –
5” 24” ABP N49 5FT24A ABP N49 5FT24G ABP N49 5FT24S
5” 30” ABP N49 5FT30A ABP N49 5FT30G ABP N49 5FT30S
5” 36” ABP N49 5FT36A ABP N49 5FT36G ABP N49 5FT36S

2019 | ALLIANCE PARTS EXHAUST LINES 30

FLEX HOSES
7

STANDARD FLEX TUBING

SPECIFICATIONS

Hose Diameters 3.5–6 in

Finishes Aluminized steel, galvanized & 304 stainless steel
Type Standard flex rolls
Unit of Measure Feet

FEATURES & BENEFITS

• 304 stainless steel hoses offer excellent heat and corrosion resistance
• Aluminized steel has reasonable heat and corrosion resistance and can be used when a more economical grade of
steel is required
• Galvanized steel has lower heat resistance and corrosion resistance, it can be used when a low–cost flexible hose
is required
• All metal hoses are measured in the relaxed/installed position that is halfway between fully compressed and fully
extended, providing 10% greater product yield

PART NUMBERS

DIAMETER LENGTH ALUMINIZED STEEL GALVANIZED STEEL STAINLESS STEEL

3” 10' ABP N49 3FT10A – –

3” 25' ABP N49 3FT25A ABP N49 3FT25G –
3.5” 10' ABP N49 35FT10A – –
3.5” 25' ABP N49 35FT25A ABP N49 35FT25G –
4” 10' ABP N49 4FT10A ABP N49 4FT10G ABP N49 4FT10S
4” 25' ABP N49 4FT25A ABP N49 4FT25G ABP N49 4FT25S
5” 10' ABP N49 5FT10A ABP N49 5FT10G ABP N49 5FT10S
5” 25' ABP N49 5FT25A ABP N49 5FT25G ABP N49 5FT25S
6” 10' ABP N49 6FT10A ABP N49 6FT10G ABP N49 6FT10S
6” 25' ABP N49 6FT25A ABP N49 6FT25G ABP N49 6FT25S

2019 | ALLIANCE PARTS EXHAUST LINES 31

 EXHAUST LINES

CROSS–
REFERENCE
CROSS-REFERENCE
8

CROSS-REFERENCE
BLUEBIRD BUS DONALDSON

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

Q716131 ABP N49 BB716131 J034673 ABP N49 4FT36S

J034674 ABP N49 5FT36S

J034743 ABP N49 4FT36G

DONALDSON
J034744 ABP N49 5FT36G
COMPETITOR P/N ALLIANCE P/N
J190023 ABP N49 40EL45104A
J000201 ABP N35 A35AF
J190025 ABP N49 50EL45105A
J000202 ABP N35 A40AF
J190027 ABP N49 50EL45106A
J000203 ABP N35 A50AF
J190028 ABP N49 50EL45106C
J000210 ABP N35 20EST
J190052 ABP N35 25PLA
J000211 ABP N35 25EST
J190055 ABP N35 60PLA
J000212 ABP N35 22EST
J190058 ABP N35 25PLS
J000213 ABP N35 27EST
J190060 ABP N35 30PLS
J000214 ABP N35 30EST
J190061 ABP N35 35PLS
J000215 ABP N35 35EST
J190063 ABP N35 60PLS
J000216 ABP N35 40EST
J240006 ABP N49 4FT12S
J000217 ABP N35 50EST
J240007 ABP N49 5FT12S
J000218 ABP N35 60EST
J540008 ABP N49 50MS260C
J000230 ABP N35 400UBRS
P206297 ABP N49 40TA
J000232 ABP N35 500UBRS
P206298 ABP N49 50TA
J008681 ABP N49 40EL90118A
P206336 ABP N49 40CN104A
J009486 ABP N35 400GCRC
P206344 ABP N49 40EL90116A
J009487 ABP N35 500GCRC
P206345 ABP N49 40EL90117A
J009604 ABP N35 30PLA
P206347 ABP N49 50EL90120A
J009605 ABP N35 35PLA
P206349 ABP N49 50EL90224A
J009606 ABP N35 40PLA
P206353 ABP N49 40EL90117C
J009607 ABP N35 50PLA
P206354 ABP N49 50EL90124C
J009623 ABP N35 40PLS
P206382 ABP N49 40CS248A
J009624 ABP N35 50PLS
P206383 ABP N49 50CS248A
J024748 ABP N49 40CS224A
P206384 ABP N49 40TS118C
J024749 ABP N49 40CS224C

J024750 ABP N49 50CS224A ABP N49 50CS218C

P206385
ABP N49 50TS118C
J024751 ABP N49 50CS224C
P206386 ABP N49 40CS248C
J024754 ABP N49 4FT18G
P206387 ABP N49 50CS248C
J024755 ABP N49 5FT18G
P206389 ABP N49 50S248C
J024758 ABP N49 50CS124C
P206391 ABP N49 50S260C
J024835 ABP N49 4FT24G
P206407 ABP N35 300GCRS
J024836 ABP N49 4FT24S
P206409 ABP N35 350GCRS
J024837 ABP N49 5FT24G
P206410 ABP N35 400GCRS
J024838 ABP N49 5FT24S

2019 | ALLIANCE PARTS EXHAUST LINES 33

CROSS-REFERENCE
8

CROSS-REFERENCE
DONALDSON DONALDSON

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

P206411 ABP N35 500GCRS P216228 ABP N49 50MS248C

P206552 ABP N49 3FT18S P222740 ABP N35 40PLB

P206554 ABP N49 4FT18S P222741 ABP N35 50PLB

P206555 ABP N49 5FT18S P222742 ABP N35 60PLB

P206602 ABP N35 400UBFZ P224479 ABP N49 4FT12G

P206603 ABP N35 500UBFZ P224481 ABP N49 5FT12G

P206610 ABP N35 400UBFC P224590 ABP N49 50S224C

P206611 ABP N35 500UBFC P224600 ABP N49 50CS272C

P207296 ABP N49 50CS148A P224609 ABP N49 50MS272C

P207298 ABP N49 50CS118A P224638 ABP N49 50CS184C

P207302 ABP N49 50CS160C P224698 ABP N49 40MS236C

P207309 ABP N49 50CS118C P224701 ABP N49 40MS248C

P207321 ABP N49 50CS148C P224709 ABP N49 50CS160A

P207329 ABP N49 40EL90217A P226129 ABP N49 3FT25G

P207339 ABP N49 50EL90123A P226142 ABP N49 4FT10G

P207346 ABP N49 50EL90120C P226143 ABP N49 5FT10G

P207353 ABP N49 40EL45203A P226146 ABP N49 4FT10S

P207354 ABP N49 50EL45205A P226147 ABP N49 5FT10S

P207365 ABP N49 50EL90243A P226150 ABP N49 6FT10G

P207596 ABP N35 600UBFZ P226153 ABP N49 6FT10S

P207598 ABP N35 600UBFC P226154 ABP N49 35FT25G

P208358 ABP N49 40CS236A P226155 ABP N49 4FT25G

P208359 ABP N49 40CS236C P226156 ABP N49 4FT25S

P208373 ABP N49 50S236C P226157 ABP N49 5FT25G

P208374 ABP N49 50CS236A P226158 ABP N49 5FT25S

P208375 ABP N49 50CS236C X004476 ABP N35 25EST

P208386 ABP N49 40TS118A X004478 ABP N35 30EST

P208388 ABP N49 40CS260A X004480 ABP N35 35EST

P208389 ABP N49 40CS260C X004482 ABP N35 40EST

ABP N49 50CS218A X004484 ABP N35 50EST
P208392
ABP N49 50TS118A
X004536 ABP N35 20EST
P208394 ABP N49 50CS260A
X004537 ABP N35 22EST
P208395 ABP N49 50CS260C
X004538 ABP N35 27EST
P209348 ABP N49 50EL90121A
X004539 ABP N35 60EST
P209910 ABP N49 50CS196C
X007784 ABP N35 40PLS
P209916 ABP N49 50S272C
X007785 ABP N35 50PLS
P216204 ABP N49 50CS136C
X007805 ABP N35 35PLA
P216205 ABP N49 50CS172C
X007824 ABP N35 40PLA
P216227 ABP N49 50MS236C

2019 | ALLIANCE PARTS EXHAUST LINES 34

CROSS-REFERENCE
8

CROSS-REFERENCE
DONALDSON GRAND ROCK

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

X007829 ABP N35 25PLS EZ–25 ABP N35 25EST

X007830 ABP N35 30PLS EZ–275 ABP N35 27EST

X007831 ABP N35 35PLS EZ–3 ABP N35 30EST

X007833 ABP N35 25PLA EZ–35 ABP N35 35EST

X007834 ABP N35 30PLA EZ–4 ABP N35 40EST

X009076 ABP N35 60PLS EZ–5 ABP N35 50EST

X009096 ABP N35 60PLA EZ–6 ABP N35 60EST

FB–4C ABP N35 400UBFC

DTNA FB–4ZN ABP N35 400UBFZ

COMPETITOR P/N ALLIANCE P/N FB–5C ABP N35 500UBFC

04–23657–018 ABP N49 F28522 FB–5ZN ABP N35 500UBFZ

04–23697–016 ABP N49 F25023 FB–6C ABP N35 600UBFC

04–24534–016 ABP N49 F26374 FB–6ZN ABP N35 600UBFZ

04–24535–018 ABP N49 F28522 G15–3300 ABP N49 3FT25G

04–24545–016 ABP N49 F25023 G15–35300 ABP N49 35FT25G

04–27116–000 ABP N49 F28675 G15–412 ABP N49 4FT12G

04–27238–000 ABP N49 F28675 G15–4120 ABP N49 4FT10G

04–27252–000 ABP N49 F27252 G15–418 ABP N49 4FT18G

04–28522–00 ABP N49 F28522 G15–424 ABP N49 4FT24G

04–28578–000 ABP N49 F28578 G15–4300 ABP N49 4FT25G

04–28675–000 ABP N49 F28675 G15–436 ABP N49 4FT36G

A04–25021–016 ABP N49 F26374 G15–512 ABP N49 5FT12G

A04–25021–018 ABP N49 F28578 G15–5120 ABP N49 5FT10G

A04–25022–018 ABP N49 F28522 G15–518 ABP N49 5FT18G

A04–25023–016 ABP N49 F25023 G15–524 ABP N49 5FT24G

A04–25922–018 ABP N49 F28578 G15–5300 ABP N49 5FT25G

A04–26193–018 ABP N49 F28578 G15–536 ABP N49 5FT36G

A04–26200–018 ABP N49 F27334 G15–6120 ABP N49 6FT10G

A04–26374–016 ABP N49 F26374 HD–4ZN ABP N35 400UBRZ

A04–27334–018 ABP N49 F27334 HD–5ZN ABP N35 500UBRZ

K4–24SBA ABP N49 40CS224A

K4–24SBC ABP N49 40CS224C

GRAND ROCK
K4–36SBA ABP N49 40CS236A
COMPETITOR P/N ALLIANCE P/N
K4–36SBC ABP N49 40CS236C
AS–35A ABP N35 A35AF
K4–48SBA ABP N49 40CS248A
AS–4A ABP N35 A40AF
K4–48SBC ABP N49 40CS248C
AS–5A ABP N35 A50AF
K4–60SBA ABP N49 40CS260A
EZ–2 ABP N35 20EST
K4–60SBC ABP N49 40CS260C
EZ–225 ABP N35 22EST

2019 | ALLIANCE PARTS EXHAUST LINES 35

CROSS-REFERENCE
8

CROSS-REFERENCE
GRAND ROCK GRAND ROCK

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

K5–18EXA ABP N49 50CS118A PF–6P ABP N35 60PLB

K5–18EXC ABP N49 50CS118C RB–4C ABP N35 400GCRC

K5–18SBA ABP N49 50CS218A RB–5C ABP N35 500GCRC

K5–18SBC ABP N49 50CS218C RO–4 ABP N35 400UBRS

K5–24EXC ABP N49 50CS124C RO–5 ABP N35 500UBRS

K5–24SBA ABP N49 50CS224A S5–24SBC ABP N49 50S224C

K5–24SBC ABP N49 50CS224C S5–36SBC ABP N49 50S236C

K5–36EXC ABP N49 50CS136C S5–48SBC ABP N49 50S248C

K5–36SBA ABP N49 50CS236A S5–60SBC ABP N49 50S260C

K5–36SBC ABP N49 50CS236C SF–318 ABP N49 3FT18S

K5–48EXA ABP N49 50CS148A SF–4120 ABP N49 4FT10S

K5–48EXC ABP N49 50CS148C SF–418 ABP N49 4FT18S

K5–48SBA ABP N49 50CS248A SF–424 ABP N49 4FT24S

K5–48SBC ABP N49 50CS248C SF–4300 ABP N49 4FT25S

K5–60EXA ABP N49 50CS160A SF–436 ABP N49 4FT36S

K5–60EXC ABP N49 50CS160C SF–512 ABP N49 5FT12S

K5–60SBC ABP N49 50CS260C SF–5120 ABP N49 5FT10S

K5–72EXC ABP N49 50CS172C SF–518 ABP N49 5FT18S

K5–72SBC ABP N49 50CS272C SF–524 ABP N49 5FT24S

K5–84EXC ABP N49 50CS184C SF–5300 ABP N49 5FT25S

K5–96EXC ABP N49 50CS196C SF–536 ABP N49 5FT36S

P4–36SBC ABP N49 40MS236C SF–6120 ABP N49 6FT10S

P4–48SBC ABP N49 40MS248C SF–6300 ABP N49 6FT25S

P5–36SBC ABP N49 50MS236C Y–500A ABP N49 50TA

P5–48SBC ABP N49 50MS248C Y–500C ABP N49 50TC

P5–60SBC ABP N49 50MS260C Z1100A–AM ABP N35 Z1100A

P5–72SBC ABP N49 50MS272C

PF–25 ABP N35 25PLS

HEAVY–DUTY MANUFACTURING
PF–25A ABP N35 25PLA
COMPETITOR P/N ALLIANCE P/N
PF–3 ABP N35 30PLS
10–400A ABP N49 40CN104A
PF–35 ABP N35 35PLS
14–400A ABP N49 40TA
PF–35A ABP N35 35PLA
14–500A ABP N49 50TA
PF–3A ABP N35 30PLA
14–500CP ABP N49 50TC
PF–4 ABP N35 40PLS
16–300M ABP N49 3FT25G
PF–4A ABP N35 40PLA
16–350M ABP N49 35FT25G
PF–5 ABP N35 50PLS
16–400–10M ABP N49 4FT10G
PF–5A ABP N35 50PLA
16–400–10S ABP N49 4FT10S
PF–5P ABP N35 50PLB
16–400M ABP N49 4FT25G

2019 | ALLIANCE PARTS EXHAUST LINES 36

CROSS-REFERENCE
8

CROSS-REFERENCE
HEAVY–DUTY MANUFACTURING HEAVY–DUTY MANUFACTURING

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

16–400S ABP N49 4FT25S 18A–350 ABP N35 A35AF

16–500–10M ABP N49 5FT10G 18A–400 ABP N35 A40AF

16–500–10S ABP N49 5FT10S 18A–500 ABP N35 A50AF

16–500M ABP N49 5FT25G 19–400CP ABP N35 400UBFC

16–500S ABP N49 5FT25S 19–400Z ABP N35 400UBFZ

16–600–10M ABP N49 6FT10G 19–500CP ABP N35 500UBFC

16–600–10S ABP N49 6FT10S 19–500Z ABP N35 500UBFZ

16–600M ABP N49 6FT25G 19–600CP ABP N35 600UBFC

16–600S ABP N49 6FT25S 19–600Z ABP N35 600UBFZ

17B–300–18SS ABP N49 3FT18S 19A–400 ABP N35 400UBRS

17B–400–12 ABP N49 4FT12G 19A–500 ABP N35 500UBRS

17B–400–12SS ABP N49 4FT12S 2–401–36CP ABP N49 40MS236C

17B–400–18SS ABP N49 4FT18S 2–401–48CP ABP N49 40MS248C

17B–400–24 ABP N49 4FT24G 2–500–18CP ABP N49 50S218C

17B–400–24SS ABP N49 4FT24S 2–500–24CP ABP N49 50S224C

17B–400–36 ABP N49 4FT36G 2–500–36CP ABP N49 50S236C

17B–400–36SS ABP N49 4FT36S 2–500–48CP ABP N49 50S248C

17B–500–12 ABP N49 5FT12G 2–500–60CP ABP N49 50S260C

17B–500–12SS ABP N49 5FT12S 2–500–72CP ABP N49 50S272C

17B–500–18 ABP N49 5FT18G 2–501–36A ABP N49 50MS236A

17B–500–18SS ABP N49 5FT18S 2–501–36CP ABP N49 50MS236C

17B–500–24 ABP N49 5FT24G 2–501–48A ABP N49 50MS248A

17B–500–24SS ABP N49 5FT24S 2–501–48CP ABP N49 50MS248C

17B–500–36 ABP N49 5FT36G 2–501–60CP ABP N49 50MS260C

17B–500–36SS ABP N49 5FT36S 2–501–72CP ABP N49 50MS272C

18–300 ABP N35 300GCRS 2–501–84CP ABP N49 50MS284C

18–300Z ABP N35 300GCFZ 2–501–96CP ABP N49 50MS296C

18–350 ABP N35 350GCRS 20–200–ES ABP N35 20EST

18–350Z ABP N35 350GCFZ 20–225–ES ABP N35 22EST

18–400 ABP N35 400GCRS 20–250–ES ABP N35 25EST

ABP N35 400GCFC 20–275–ES ABP N35 27EST

18–400CP
ABP N35 400GCRC
20–300–ES ABP N35 30EST
18–400Z ABP N35 400GCFZ
20–350–ES ABP N35 35EST
18–500 ABP N35 500GCRS
20–400–ES ABP N35 40EST
ABP N35 500GCFC
18–500CP 20–500–ES ABP N35 50EST
ABP N35 500GCRC
20–600–ES ABP N35 60EST
18–500Z ABP N35 500GCFZ
20A–250 ABP N35 25PLA
18–600CP ABP N35 600GCFC
20A–300 ABP N35 30PLA
18–600Z ABP N35 600GCFZ

2019 | ALLIANCE PARTS EXHAUST LINES 37

CROSS-REFERENCE
8

CROSS-REFERENCE
HEAVY–DUTY MANUFACTURING HEAVY–DUTY MANUFACTURING

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

20A–350 ABP N35 35PLA 3–501–48A ABP N49 50CS248A

20A–400 ABP N35 40PLA 3–501–48CP ABP N49 50CS248C

20A–500 ABP N35 50PLA 3–501–60A ABP N49 50CS260A

20A–600 ABP N35 60PLA 3–501–60CP ABP N49 50CS260C

20B–350 ABP N35 35PBA 3–501–72A ABP N49 50CS272A

20B–400 ABP N35 40PBA 3–501–72CP ABP N49 50CS272C

20B–500 ABP N35 50PBA

20S–250 ABP N35 25PLS NAVISTAR

20S–300 ABP N35 30PLS COMPETITOR P/N ALLIANCE P/N
20S–350 ABP N35 35PLS 2512967C91 ABP N49 I67C91
20S–400 ABP N35 40PLS 3846462C5 ABP N49 I462C5
20S–500 ABP N35 50PLS 3859149C91 ABP N49 I67C91
20S–600 ABP N35 60PLS 3859154C1 ABP N49 I154C1
3–401–24A ABP N49 40CS224A 4042712C91 ABP N49 I67C91
3–401–24CP ABP N49 40CS224C

3–401–36A ABP N49 40CS236A

NELSON GLOBAL
3–401–36CP ABP N49 40CS236C
COMPETITOR P/N ALLIANCE P/N
3–401–48A ABP N49 40CS248A
89016C ABP N49 50S218C
3–401–48CP ABP N49 40CS248C
89017C ABP N49 50S224C
3–401–60A ABP N49 40CS260A
89018C ABP N49 50S236C
3–401–60CP ABP N49 40CS260C
89043A ABP N49 40CS224A
3–500–18A ABP N49 50CS118A
89043C ABP N49 40CS224C
3–500–18CP ABP N49 50CS118C
89044A ABP N49 40CS236A
3–500–24CP ABP N49 50CS124C
89044C ABP N49 40CS236C
3–500–36CP ABP N49 50CS136C
89045A ABP N49 40CS248A
3–500–48A ABP N49 50CS148A
89045C ABP N49 40CS248C
3–500–48CP ABP N49 50CS148C
89046A ABP N49 50CS224A
3–500–60A ABP N49 50CS160A
89046C ABP N49 50CS224C
3–500–60CP ABP N49 50CS160C
89047A ABP N49 50CS236A
3–500–72CP ABP N49 50CS172C
89047C ABP N49 50CS236C
3–500–84CP ABP N49 50CS184C
89048A ABP N49 50CS248A
3–500–96CP ABP N49 50CS196C
89048C ABP N49 50CS248C
3–501–18A ABP N49 50CS218A
89049A ABP N49 50CS260A
3–501–18CP ABP N49 50CS218C
89049C ABP N49 50CS260C
3–501–24A ABP N49 50CS224A
89058C ABP N49 50CS124C
3–501–24CP ABP N49 50CS224C
89060A ABP N49 50CS148A
3–501–36A ABP N49 50CS236A
89060C ABP N49 50CS148C
3–501–36CP ABP N49 50CS236C
89074A ABP N49 40EL45104A

2019 | ALLIANCE PARTS EXHAUST LINES 38

CROSS-REFERENCE
8

CROSS-REFERENCE
NELSON GLOBAL NELSON GLOBAL

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

89075A ABP N49 50EL45106A 89526K–20 ABP N35 35EST

89075C ABP N49 50EL45106C 89527K–20 ABP N35 40EST

89085A ABP N49 50EL45206A 89528K–20 ABP N35 50EST

89096A ABP N49 50EL90243A 89529K–20 ABP N35 60EST

89105A ABP N49 40EL90116A 89548C ABP N35 400GCRC

89106A ABP N49 40EL90117A 89549C ABP N35 500GCRC

89106C ABP N49 40EL90117C 89558K ABP N35 400UBFZ

89107A ABP N49 50EL90120A 89559K ABP N35 500UBFZ

89107C ABP N49 50EL90120C 89560K ABP N35 600UBFZ

89108A ABP N49 50EL90121A 89568K ABP N35 400UBFC

89108C ABP N49 50EL90124C 89569K ABP N35 500UBFC

89115A ABP N49 40EL90217A 89570K ABP N35 600UBFC

89116A ABP N49 40EL90219A 89606K ABP N49 4FT18G

89117A ABP N49 50EL90220A 89607K ABP N49 4FT24G

89117C ABP N49 50EL90220C 89608K ABP N49 4FT36G

89118A ABP N49 50EL90224A 89609K ABP N49 5FT18G

89123A ABP N49 50EL90244A 89611K ABP N49 5FT36G

89146A ABP N49 50CS118A 89613K ABP N49 3FT18S

89146C ABP N49 50CS118C 89624K ABP N49 4FT10S

89155A ABP N49 40TS118A 89625K ABP N49 5FT10S

89155C ABP N49 40TS118C 89626K ABP N49 6FT10S

ABP N49 50CS218A 89644K ABP N49 4FT10G
89156A
ABP N49 50TS118A
89645K ABP N49 5FT10G
ABP N49 50CS218C
89156C 89646K ABP N49 6FT10G
ABP N49 50TS118C
89687K ABP N49 40CN104A
89222A ABP N49 40CS260A
89712K ABP N49 3FT25G
89222C ABP N49 40CS260C
89713K ABP N49 35FT25G
89227A ABP N49 50CS160A
89714K ABP N49 4FT25G
89227C ABP N49 50CS160C
89715K ABP N49 5FT25G
89296A ABP N49 50CS272A
89716K ABP N49 6FT25G
89296C ABP N49 50CS272C
89723K ABP N49 4FT25S
89308K ABP N49 4FT12A
89724K ABP N49 5FT25S
89309K ABP N49 4FT18A
89725K ABP N49 6FT25S
89310K ABP N49 4FT24A
89727K ABP N49 4FT18S
ABP N49 4FT30A
89311K
ABP N49 4FT36A 89728K ABP N49 4FT24S
89521K–20 ABP N35 20EST 89729K ABP N49 4FT36S
89522K–20 ABP N35 22EST 89730K ABP N49 5FT12S
89525K–20 ABP N35 30EST 89731K ABP N49 5FT18S

2019 | ALLIANCE PARTS EXHAUST LINES 39

CROSS-REFERENCE
8

CROSS-REFERENCE
NELSON GLOBAL NELSON GLOBAL

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

89733K ABP N49 5FT36S 90376A–10 ABP N35 40PBA

89759K ABP N49 4FT10A 90378A–10 ABP N35 50PBA

89760K ABP N49 4FT25A 90438C ABP N49 50MS260C

89772K ABP N49 5FT10A 90524K ABP N49 6FT25A

89773K ABP N49 5FT25A 90546K–10 ABP N35 40PLB

89781A ABP N49 50EL45105A 90547K–10 ABP N35 50PLB

89782A ABP N49 40EL45203A 90589C ABP N49 50MS272C

89783A ABP N49 50EL45205A 90590C ABP N49 50MS284C

89784A ABP N49 50EL90123A 90591C ABP N49 50MS296C

89784C ABP N49 50EL90123C 90605C ABP N49 50S248C

89918C ABP N49 50S260C 90874A–20 ABP N35 A35AF

89923A ABP N49 40EL90118A 90875A–20 ABP N35 A40AF

89940A ABP N49 40TA 90877A–20 ABP N35 A50AF

89950A ABP N49 50TA 90902K ABP N49 5FT12G

89950C ABP N49 50TC 90903K ABP N49 4FT12G

89988C ABP N49 50CS172C

89989C ABP N49 50CS184C

PACCAR
89990C ABP N49 50CS196C
COMPETITOR P/N ALLIANCE P/N
89992C ABP N49 40MS248C
M66–3541 ABP N49 KW3541
89993C ABP N49 50MS236C
M66–6541–0320 ABP N49 PB0320
89994C ABP N49 50MS248C
M66–6541–0335 ABP N49 PB0335
900043K ABP N35 400UBRS
M66–6541–0405 ABP N49 PB0405
900044K ABP N35 500UBRS
M66–6559 ABP N49 KW6559
90191K ABP N49 3FT10A
M66–7064–0330 ABP N49 KW0330
90206K ABP N49 35FT10A
M66–7091–0320 ABP N49 PB0320
90214K ABP N49 35FT25A
M66–7091–0335 ABP N49 PB0335
90354A–10 ABP N35 30PLA
M66–7091–0405 ABP N49 PB0405
90355A–10 ABP N35 35PLA

90356A–10 ABP N35 40PLA

TORCA
90358A–10 ABP N35 50PLA
COMPETITOR P/N ALLIANCE P/N
90359A–10 ABP N35 60PLA
10–0425–AM ABP N35 100425
90362A–10 ABP N35 25PLS
10–0725–AM ABP N35 100725
90364A–10 ABP N35 30PLS
13–0001–AM ABP N35 04 20289 000
90365A–10 ABP N35 35PLS
13–0005–AM ABP N35 04 20289 001
90366A–10 ABP N35 40PLS
20–0008–AM ABP N35 20 0008
90368A–10 ABP N35 50PLS
20–0009–AM ABP N35 20 0009
90369A–10 ABP N35 60PLS
20–0011–AM ABP N35 04 18866 000
90375A–10 ABP N35 35PBA
20–0104–AM ABP N35 04 20769 000

2019 | ALLIANCE PARTS EXHAUST LINES 40

CROSS-REFERENCE
8

CROSS-REFERENCE
TORCA TORCA

COMPETITOR P/N ALLIANCE P/N COMPETITOR P/N ALLIANCE P/N

20–0384–AM ABP N35 12 14741 000 L50SA ABP N35 50PLS

20–0396–AM ABP N35 04 18866 001 L60AA ABP N35 60PLA

32–0029 ABP N35 30PLAG L60BA ABP N35 60PLB

32–0031 ABP N35 30PLSG L60SA ABP N35 60PLS

32–0036 ABP N35 35PLAG X1100A–AM ABP N35 X1100A

32–0038 ABP N35 35PLSG Z1100A–AM ABP N35 Z1100A

32–0043 ABP N35 40PLAG

32–0045 ABP N35 40PLSG

VOLVO
32–0046 ABP N35 40PLBG
COMPETITOR P/N ALLIANCE P/N
32–0057 ABP N35 50PLAG
21428532 ABP N49 V28532
32–0059 ABP N35 50PLSG
21428534 ABP N49 V28534
32–0060 ABP N35 50PLBG
21428536 ABP N49 V28536
A35AF–AM ABP N35 A35AF
21959389 ABP N49 V28532
A40AF–AM ABP N35 A40AF
21959393 ABP N49 V28534
A50AF–AM ABP N35 A50AF
21959395 ABP N49 V28536
B35AA ABP N35 35PBA
22307697 ABP N49 V28532
B40AA ABP N35 40PBA
22307701 ABP N49 V28534
B50AA ABP N35 50PBA
22307703 ABP N49 V28536
E20ST ABP N35 20EST

E22ST ABP N35 22EST

WALKER
E25ST ABP N35 25EST
COMPETITOR P/N ALLIANCE P/N
E27ST ABP N35 27EST
33223 ABP N35 35PLS
E30ST ABP N35 30EST
33224 ABP N35 40PLS
E35ST ABP N35 35EST
33225 ABP N35 50PLS
E40ST ABP N35 40EST
33271 ABP N35 60PLS
E50ST ABP N35 50EST
33316 ABP N35 A50AF
E60ST ABP N35 60EST
33968 ABP N35 35PLA
L25AA ABP N35 25PLA
33969 ABP N35 40PLA
L25SA ABP N35 25PLS
33970 ABP N35 50PLA
L30AA ABP N35 30PLA
35227 ABP N35 A35AF
L30SA ABP N35 30PLS
35228 ABP N35 A40AF
L35AA ABP N35 35PLA
35620 ABP N35 20EST
L35SA ABP N35 35PLS
35621 ABP N35 22EST
L40AA ABP N35 40PLA
35622 ABP N35 27EST
L40BA ABP N35 40PLB
35975 ABP N35 50EST
L40SA ABP N35 40PLS
35976 ABP N35 40EST
L50AA ABP N35 50PLA
35977 ABP N35 35EST
L50BA ABP N35 50PLB
35978 ABP N35 30EST

2019 | ALLIANCE PARTS EXHAUST LINES 41

CROSS-REFERENCE
8

CROSS-REFERENCE
WALKER

COMPETITOR P/N ALLIANCE P/N

35979 ABP N35 25EST

35980 ABP N35 60EST

2019 | ALLIANCE PARTS EXHAUST LINES 42

 FIND YOUR NEAREST LOCATION AT ALLIANCEPARTS.COM

DTNA/APSM-M-1106. Specifications are subject to change without notice. Copyright © Daimler Trucks North America LLC. All rights reserved. Alliance Parts is a brand of Daimler Trucks
North America LLC, a Daimler company.