Control Systems
Control Systems
Control Systems
CATEGORY L T P CREDIT
ECT307 CONTROL SYSTEMS
PCC 3 1 0 4
Preamble: This course aims to develop the skills for mathematical modelling of various
control systems and stability analysis using time domain and frequency domain approaches.
Course Outcomes: After the completion of the course the student will be able to
Assessment Pattern
Mark distribution
Attendance : 10 marks
Continuous Assessment Test (2 numbers) : 25 marks
Assignment/Quiz/Course project : 15 marks
End Semester Examination Pattern: There will be two parts; Part A and Part B. Part A
contain 10 questions with 2 questions from each module, having 3 marks for each question.
Students should answer all questions. Part B contains 2 questions from each module of which
student should answer any one. Each question can have maximum 2 sub-divisions and carry
14 marks.
2. Using block diagram reduction techniques find the transfer function of the given
system.
3. Find the overall gain for the given signal flow graph using Mason’s gain equation.
Course Outcome 2 (CO2): Determine Transient and Steady State behaviour of systems
using standard test signals
1. Derive an expression for time response of a given first/ second order system to step/
ramp input.
2. Determine step, ramp and parabolic error constants for the given unity feedback
control system.
3. Obtain the steady state error of a given system when subjected to an input.
Course Outcome 3 (CO3): Determine absolute stability and relative stability of a system
1. Using Ruth Hurwitz criterion, for the given control system determine the location of
roots on S- plane and comment on the stability of the system.
2. Sketch the Root Locus for the given control system.
2. Draw the Nyquist plot for the given control system and determine the range of K for
which the system is stable.
3. Plot the bode plot for the given transfer function and find the gain margin and phase
margin.
4. Describe the design procedure of a lag/ lead compensator.
Course Outcome 5 (CO5): Analyse system Controllability and Observability using state
space representation
1. Obtain the state space representation of the given electrical/ mechanical system.
2. For the given control system, obtain the state equations and output equations:-
3. Plot the bode plot for the given transfer function and find the gain margin and phase
margin.
4. Determine the controllability and observability of the given system.
SYLLABUS
Module 1:
Introduction: Basic Components of a Control System, Open-Loop Control Systems and
Closed-Loop Control Systems, Examples of control system
Feedback and its effects: Types of Feedback Control Systems, Linear versus Nonlinear
Control Systems, Time-Invariant versus Time-Varying Systems.
Transfer Function from Block Diagrams and Signal Flow Graphs: impulse response and
its relation with transfer function of linear systems. Block diagram representation and
reduction methods, Signal flow graph and Mason’s gain formula.
Module 2:
Time Domain Analysis of Control Systems: Introduction- Standard Test signals, Time
response specifications.
Time response of first and second order systems to unit step input and ramp inputs, time
domain specifications.
Frequency domain analysis: Frequency domain specifications, correlation between time and
frequency responses.
Module 3:
Stability of linear control systems: Concept of BIBO stability, absolute stability, Routh
Hurwitz Criterion, Effect of P, PI & PID controllers.
Root Locus Techniques: Introduction, properties and its construction, Application to system
stability studies. Illustration of the effect of addition of a zero and a pole.
Module 4:
Nyquist stability criterion: Fundamentals and analysis
Relative stability: gain margin and phase margin. Stability analysis with Bode plot.
Design of Compensators: Need of compensators, design of lag and lead compensators using
Bode plots.
Module 5:
State Variable Analysis of Linear Dynamic Systems: State variables, state equations, state
variable representation of electrical and mechanical systems, dynamic equations, merits for
higher order differential equations and solution.
Transfer function from State Variable Representation, Solutions of the state equations, state
transition matrix
Concept of controllability and observability and techniques to test them - Kalman’s Test.
Text Books
1. Farid Golnaraghi, Benjamin C. Kuo, Automatic Control Systems, 9/e, Wiley India.
2. I.J. Nagarath, M.Gopal: Control Systems Engineering (5th-Edition) ––New Age
International Pub. Co., 2007.
3. Ogata K., Discrete-time Control Systems, 2/e, Pearson Education.
Reference Books
1. I.J. Nagarath, M.Gopal: Scilab Text Companion for Control Systems Engineering
(3rd-Edition) ––New Age International Pub. Co., 2007.
2. Norman S. Nise, Control System Engineering, 5/e, Wiley India.
3. M. Gopal, Digital Control and State Variable Method, 4/e, McGraw Hill Education
India, 2012.
4. Ogata K., Modern Control Engineering, Prentice Hall of India, 4/e, Pearson
Education,2002.
5. Richard C Dorf and Robert H. Bishop, Modern Control Systems, 9/e, Pearson
Education,2001.
Simulation Assignments
1. Plot the pole-zero configuration in s-plane for the given transfer function.
2. Determine the transfer function for given closed loop system in block diagram
representation.
3. Plot unit step response of given transfer function and find delay time, rise time, peak
time and peak overshoot.
4. Determine the time response of the given system subjected to any arbitrary input.
5. Plot root locus of given transfer function, locate closed loop poles for different values
of k.
6. Plot bode plot of given transfer function and determine the relative stability by
measuring gain and phase margins.
8. Plot Nyquist plot for given transfer function and determine the relative stability.
10. Determine the state space representation of the given transfer function.
1 Draw the signal flow graph for the following set of algebraic equations: K2
x1=ax0+bx1+cx2, x2=dx1+ex3
2 Using block diagram reduction techniques find C(s) / R(s) for the given system: K2
4 Determine the parabolic error constant for the unity feedback control system G(s) K3
= 10 (S+2)/ (s+1) s2
5 Using Routh Hurvitz criterion, determine the number of roots in the right half of S- K3
plane for the system S4+2S3+10S2+20S+5=0.
6 Compare PI, PD and PID controllers. K1
PART – B
Answer one question from each module; each question carries 14 marks.
Module - I
11a. Find the overall gain C(s)/ R(s) for the signal flow graph shown using Mason’s 7
gain equation
CO1
K3
11b.
Determine the transfer function X1(s)/ F(s) for the system shown below: 7
CO1
K3
OR
12a. Find the transfer function X2(s)/ F(s). Also draw the force voltage analogy of the 8
given system: CO1
K3
12b.
Determine the overall transfer function of the block diagram shown in below 6
figure: CO1
K3
Module - II
13a. The open loop transfer function of a servo system with unity feedback is G(s) = 7
10/s(0.1s+1). Evaluate the static error constants of the system. Obtain the steady CO2
state error of the system when subjected to an input given by r(t)= a0+a1t+a2t2/2 K2
13b. A unity feedback control system is characterized by an open loop transfer function 7
G(s) = K/ s(s+10). Determine the gain K so that the system will have a damping CO2
ratio of 0.5 for this value of K. Determine the settling time, peak overshoot, rise K2
time and peak time for a unit step input.
OR
14a. Find kp, kv, ka and steady state error for a system with open loop transfer function 7
G(s)H(s) = 15 (s+4) (s+9)/ s(s+3) (s+6) (s+8) CO2
14b. K2
Derive the expression for time response of a second order under damped system to 7
step input. CO2
K2
Module - III
15b. 7
CO3
The characteristic equation of a system is s7+9s6+24s5+24s4+24s3+24s2+23s+15. K3
Determine the location of roots on S- plane and hence comment on the stability of
the system using Ruth Hurwitz criterion.
OR
16a. Prove that the breakaway points of the root locus are the solutions of dK/ds = 0. 7
where K is the open loop gain of the system whose open loop transfer function is CO3
16b. G(s). K2
OR
Draw the Nyquist plot for the system whose open loop transfer function is 6
18b. G(s)H(s) = K/ S(S+2) (S+10). Determine the range of K for which the closed loop CO4
system is stable. K3
Module - V
19a. Obtain the state model for the given transfer function Y(s)/ U(s) = 1/ (S2+S+1).
7
CO5
K3
19b. What is transfer matrix of a control system? Derive the equation for transfer 7
matrix. CO5
K2
OR
20a. A system is described by the transfer function Y(s)/ U(s) = 10 (s+4)/ s (s+2) (s+3). 7
Find state and output equations of the system. CO5
K3