Free Mini Course - Installation Steps
Free Mini Course - Installation Steps
2. Unzip/”extract all” on both of the folders, right click on the relevant folder then select
“Extract All”. This will extract the folder to a location of your choice, so you can create a
folder and store where you wish.
https://www.myplctraining.com/
1
Install the Software
RSLinx Classic Lite
Start by installing RSLinx Classic Lite. Select the RSLinxClassicLitev3.80 setup file. Follow the
screenshots below to install:
https://www.myplctraining.com/
2
https://www.myplctraining.com/
3
https://www.myplctraining.com/
4
https://www.myplctraining.com/
5
RSLogix Micro
Next, install RSLogix Micro Starter Lite. Open the Micro_Lite_830 folder and install RSLogix
Micro using the ‘setup’ file. Follow the screenshots below to install:
https://www.myplctraining.com/
6
https://www.myplctraining.com/
7
RSLogix Emulate 500
Finally, drill down into Emulate500 > 6.00.00-RSLogixEmulate500-CD and select the ‘setup’
file. Follow the screenshots below to install:
https://www.myplctraining.com/
8
https://www.myplctraining.com/
9
https://www.myplctraining.com/
10
For more detailed training worksheets like this and video lessons on PLC and HMI
programming check myPLCtraining Academy.
Stephen Gates
[email protected]
https://www.myplctraining.com/
11