User Manual

Magnetic Wireless Earbuds

Downloaded from www.Manualslib.com manuals search engine

 Thank you for purchasing the AUKEY EP-B40 Magnetic Wireless Earbuds.
Please read this user manual carefully and keep it for future reference. If
you need any assistance, please contact our support team with your product
model number and Amazon order number.

Package Contents
Magnetic Wireless Earbuds Carrying Pouch
Micro-USB Cable User Manual
Three Sets of Ear-Tips (S / M / L) Warranty Card

Specifications
Model EP-B40

Technology BT 4.1, A2DP, AVRCP, HSP, HFP, aptX

Chipset CSR8645

Microphone Noise Reduction 6th generation dual-mic cVc

Microphone Sensitivity -42dB ±3dB

Frequency Range 20-20KHz

Input DC 5V

Charging Time 1.5 hours

Play Time Up to 8 hours

Talk Time Up to 8 hours

Battery Type Li-Polymer (2 × 60mAh)

Operating Range Up to 10m / 33ft

Weight 13g / 0.46oz

- 01 -
Downloaded from www.Manualslib.com manuals search engine
 Product Diagram

Micro-USB
Charging Port Volume + / Next Track

LED Indicator

Multi-Function Button

Microphone Volume – /
Previous Track

- 02 -
Downloaded from www.Manualslib.com manuals search engine
 Getting Started
Charging
Fully charge your earbuds before first use. Before charging, make sure the
earbuds are turned off. To charge, simply connect one end of the
micro-USB cable to a USB charging port and the other end to the input
port on the earbuds. When the red LED indicator light turns blue, your earbuds
are fully charged and ready for use. Charging takes around 1.5 hours.

Turning On / Off

Press and hold the multi-function button until the LED

Turn On
indicator flashes blue, and you will hear an ascending tone

Press and hold the multi-function button until the LED

Turn Off
indicator flashes red, and you will hear a descending tone

Pairing
Starting with your earbuds powered off:
1. Press and hold the multi-function button until the LED flashes blue and
red alternately

- 03 -
Downloaded from www.Manualslib.com manuals search engine
 2. Turn on the pairing function of the device you want to pair with the earbuds
3. In the list of available devices, find and select “AUKEY EP-B40”
4. If a code or pin is required for pairing, enter “0000”

Simultaneous Pairing with Two Devices

1. Follow the instructions in the “Pairing” section to pair the earbuds with
Device A
2. Once paired, disable wireless function on Device A and turn off the
earbuds
3. Follow the instructions in the “Pairing” section to pair with Device B
4. Once paired with Device B, reactivate wireless function on Device A
and select “AUKEY EP-B40” in the list of paired devices
5. You can now make and receive calls from either of the two paired devices

Notes
● To reset the earbuds, power on the earbuds and then hold volume +,
volume -, and multi-function button simultaneously until the LED indicator
flashes red for 2 seconds. Once the pairing list is cleared, you will hear
a tone; and when you turn on the earbuds next time, the earbuds will
automatically enter into pairing mode
● The earbuds will automatically shut down after 5 minutes in pairing
mode if no devices are paired
● If your paired device is turned off or manually disconnected, the
earbuds LED indicator will flash blue once every 8 seconds and the
earbuds will shut down after 5 minutes
● The maximum wireless operating range is 33ft (10m). If you exceed this
range, the earbuds will disconnect from your paired devices and you
will hear a tone. The connection will be re-established once you re-enter
the wireless range within 15 minutes. The earbuds will automatically
reconnect to the last-paired device. To connect with other devices,
repeat the previous “Pairing” steps

- 04 -
Downloaded from www.Manualslib.com manuals search engine
 Music and Calls Control
Making Calls
Once paired with your smartphone, making and answering phone calls
can be managed via the in-line remote

Answer / End a call Press the multi-function button once

Double press the multi-function button
Redial last called number
in standby mode
Hold the multi-function button for more
Reject an incoming call
than 1 second
Press and hold the volume - for 2
Mute / Resume a call
seconds during a call
Press and hold the volume + for 2
seconds during a call to switch
Voice switch
between the earbuds and your
phone for talking
Press and hold the multi-function
Device switch button for 2 seconds during a call
to switch between two mobile phones

Streaming Audio
Once paired, you can wirelessly stream audio from your device to your
earbuds. Music will automatically pause when you receive an incoming
phone call, and resume once the call has ended.

Play / Pause Press the multi-function button once

Volume Control Press the volume + / -
Next / Previous Track Press and hold the volume + / - for 2 seconds
Double press multi-function button to switch
EQ Switch
vocals / treble / bass

- 05 -
Downloaded from www.Manualslib.com manuals search engine
 LED Indicator Status
Blue & red flashing alternately Pairing mode
Blue flashing twice every 5 seconds Standby mode
Blue flashing twice every 8 seconds Playing music
Blue flashing once every 8 seconds Disconnected / In call
Blue flashing once every second Incoming call
Red flashing twice every 8 seconds Low battery
Red Charging
Blue (after charging) Fully charged

FAQ
The earbuds are on, but not connecting with my device
To connect the earbuds with your device, you need to enter pairing mode.
Follow the instructions in the “Pairing” section of this manual.

I have established a connection with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds.
Some smartphones require you to set up the earbuds as an audio output
device before the audio can be transmitted. If you are using a music player
or other device, please make sure it supports the A2DP stereo music profile.

The sound is not very clear or the caller cannot hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try getting
closer to your smartphone to rule out the possibility of interference or wireless
range-related issues.

Can I use the earbuds while they are charging?

No.

- 06 -
Downloaded from www.Manualslib.com manuals search engine
 What is the wireless range of the earbuds?
The maximum range is 33ft (10m). However, the actual range will depend on
environmental factors. For optimal performance, keep your devices connected
with the earbuds within a 15ft-25ft range and make sure that there are no major
obstacles (like reinforced steel walls) between the earbuds and your devices.

My earbuds won’t turn on

Try charging the earbuds for a while. If the earbuds still won’t power on,
please contact our support team at the address below.

Product Care & Use

● Please keep away from liquids and extreme heat
● Do not use the earbuds at high volume for extended periods, as this
may cause permanent hearing damage or loss

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order number
and product model number.

Amazon US orders: [email protected]

Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]

*Please note, AUKEY can only provide after sales service for products purchased directly from
AUKEY. If you have purchased from a different seller, please contact them directly for service
or warranty issues.

- 07 -
Downloaded from www.Manualslib.com manuals search engine
 Notice for US
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation

FCC rules
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
● Relocate the receiving antenna
● Increase the separation between equipment and receiver
● Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
● Consult the dealer or an experienced radio / TV technician for help

- 08 -
Downloaded from www.Manualslib.com manuals search engine