PLASTIC ADDITIVES
plastistrength®
TDS/TECHNICAL DATA SHEET
Plastistrength® 580
Acrylic Process Aid
PRODUCT DESCRIPTION PRODUCT BENEFITS
Plastistrength 580 process aid is an ultra-high molecular
®
Cell structure and surface finish
weight acrylic additive that provides exceptional melt strength. Use of Plastistrength® 580 process aid results in more uniform
This property leads to excellent foam density and cellular and finer cell structure after cell nucleation, compared to other
structure, with a quality surface finish, for cellular PVC building commercially available process aids by capturing an optimum
products. Plastistrength® 580 process aid has been specifically amount of gas evolved from the blowing agent component.
designed for use in thick PVC foam sheet but also proven Because of the additive’s tailored chemistry, a smooth surface
effective in other applications. finish is maintained after extrusion, allowing for exceptional
weatherability and paintability.
Micrographs of the cell structure in rigid PVC foamed sheet
made with Plastistrength® 580 process aid (top), and a
TYPICAL PHYSICAL PROPERTIES *
typical commercial process aid (bottom).
Physical Form White Powder
Specific Gravity 1.11
Bulk Density 0.5 g/cm3
Particle Size 2% retained on 40 Mesh
Percent Volatiles 1% by weight
*Typical properties not to be construed as specifications
PRODUCT BENEFITS
Melt strength and foam density
Due to its ultra-high molecular weight and chemistry,
Plastistrength® 580 process aid significantly improves the
melt strength and rheological characteristics of cellular PVC
formulations, which results in lower foam density.
Usage level
Plastistrength® 580 process aid offers excellent value in
formulations by increased efficiency and dosage reduction
compared to traditional PVC process aids. Figure 1 shows lower
foam densities are achievable with lower loading levels for
Plastistrength® 580 compared to other commercial products SUGGESTIONS FOR USE
from Plastistrength® line of process aids.
Plastistrength® 580 process aid is recommended for all vinyl
Rigid PVC sheet foam density versus loading level. foam applications. The product’s excellent melt strength level
makes it an ideal process aid for thick cellular PVC trim board
0.61
and free foam applications. With improved efficiency versus
0.60
competitive technologies, Plastistrength® 580 process aid can
be used at reduced loading levels in deck boards, thin cellular
PVC sheet, foam core pipe, and foamed moldings and maintain
Foam density (g/cc)
0.60
the needed final properties. Arkema’s Technical Service Team
0.59 is available to discuss your application requirements, provide
0.59
formulation guidance, and lab testing as needed.
0.58
5 phr 7 phr 9 phr
0.58
PACKAGING
0.57
Plastistrenght® Plastistrenght® Plastistrenght® Plastistrength® 580 is packaged in 20 kg bags and bulk bags.
580 566 530
arkema.com
ENVIRONMENTAL AND SAFETY INFORMATION
Before handling this material, read and understand the MSDS (Material Safety Data Sheet) / SDS (Safety
Data Sheet) for additional information on safety, health and environmental information. The MSDS/SDS are
available on our website www.arkema.com or upon request at our Customer Service Department. Arkema
believes strongly in Responsible Care® as a public commitment.
MORE TECHNICAL INFORMATION AVAILABLE FOR MORE
INFORMATION
Ask your Arkema account manager for further information on high CONTACT
quality Arkema additives for use in PVC, PC, PBT, ABS, PLA Epoxy,
Clearstrength® and Plastistrength® are registered trademarks of Arkema. Biostrength® and Durastrength® are registered trademarks of Arkema Inc.
(meth)-acrylic and other polymer or thermosetting systems. Please contact your local account
Arkema produces a full line of impact modifiers and processing manager or our headquarters:
aids. In addition, Arkema’s Technical Service staff is also
available to assist compounders and processors with formulation In Europe
and processing advice. ARKEMA
Arkema Coating Resins
420 Rue d’Estienne d’Orves
Durastrength® Impact Modifiers 92705 COLOMBES Cedex, France
Durastrength® acrylic impact modifiers deliver outstanding impact Tel: +33 (0) 149 008 080
Responsible Care® is a registered trademark of the American Chemistry Council Inc. 2022 Arkema Inc. All rights reserved.
characteristics for outdoor durable applications in PVC and plasticadditives.arkema.com/en/
Engineering Resins. contact/
Plastistrength® Process Aids In US
Plastistrength® Process Aids offer producers a complete line of melt Arkema Inc.
Coating Resins
strengtheners and metal release agents for PVC and Engineering
410 Gregson DrCary, NC 27511
Resins. Plastistrength® process aids can improve fusion, surging, Tel: +1 (877) 331-6696
and aesthetics. plasticadditives.arkema.com/en/
contact/
Clearstrength® Impact
Clearstrength® Impact Modifiers are designed for extreme impact In Asia
or impact/clarity combination in PVC and Engineering Resins. Arkema Pte Ltd.
Clearstrength® Impact Modifiers provide superior toughening effect 10, Science Park Road, #01-01A,
The Alpha Singapore Science
in epoxy and (meth)-acrylic resins.
Park II,
Singapore 117684
Biostrength® Additives Tel: +65 6419 9199
Biostrength® product line of impact modifiers, melt strengtheners plasticadditives.arkema.com/en/
and metal release agents are designed to improve properties contact/
and enhance processability of polylactic acid (PLA) and other
biopolymers compounds.
Don’t hesitate to visit plasticadditives.arkema.com
ASK QUESTIONS LIBRARY WEB SERVICES PRODUCT
TO OUR EXPERTS DOCS TDS SELECTORS
WEBINARS SAMPLING BROCHURES
Please consult Arkema’s disclaimer regarding the use of our products on
http://www.arkema.com/en/products/product-safety/disclaimer/ (2022/06/23)
plasticadditives.arkema.com
