Scribd
Upload
20 views2 pages

Multi-Microwave Kit

Uploaded by

anilarici32
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views2 pages

Multi-Microwave Kit

Uploaded by

anilarici32
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Typical Application of

Anten’it Multi-
Microwave Kit

Anten’it Multi-Microwave Kit for Researchers


and System Engineers
A MULTI-MICROWAVE SOLUTION FOR YOUR LABORATORY/DEPARTMENT
INCLUDING MANY PASSIVE COMPONENTS UP TO 6 GHZ

Anten’it Multi-Microwave kit is useful with Anten’it Multi-Antenna kit. They can be
combined to create RF front end structures. Anten’it Multi-Microwave Kit provides
many advantages to its users:

1. This kit is appropriate for researchers and system engineers at the


universities, institutions and companies. They can use the kit in their research
stages.

2. There are many datasheets with measured results in the datasheet booklet
and microwave building instructions include how to build those components
step by step. They can follow the steps, build the passive microwave
components.

3. It saves their budget for purchasing microwave components. Waveguide


components have high cost. If you work in a wide frequency range, you need
the components for each frequency range which increases the costs
dramatically. The reusable structure of this kit enables the usage of the same
blocks for different components. This also decreases the cost of waveguide
structures.
4. It saves the waiting duration of purchasing microwave components.

5. System engineers and researchers need to iterate their system design. When
RF requirements change during the project, they can change the RF
parameters easily by hand. If this kit is used with the Anten’it antenna kits, it
is possible to build RF front end structures.

6. Anten’it Multi-Antenna Kit can be used for conceptual designs.

7. They can build microwave structures for academic purposes (journals,


conferences, books).

8. They can learn microwave design by using it and iterate in front of a network
analyzer.

9. If your research partner has Anten’it kits, they can share the design with you
and you can build the same structure in your organization.

Anten’it can be ordered via distributors in www.antenit.com or [email protected]


Anten’it is a patent pending product of Antenom Antenna Technologies
Theoretical Background Behind Anten’it Kits
HARDWARE MESH CELLS
Electromagnetic simulation programs generally include CAD interfaces. When the
designers draw a solid structure in the CAD interface, simulation programs discretize
the solid structure into small pieces called “mesh cells”. Maxwell equations are
calculated within each mesh cell by using numerical methods such as method of
moments (MOM), finite-difference time-domain (FDTD), finite element method
(FEM) etc. Each numerical method uses different mesh cell shapes.

FDTD type of simulation programs use cubic mesh cells. In order to get accurate
results, the mesh cell dimensions are selected lower than wavelength/10.

Anten’it Microwave Kits use brick-type hardware cells. Brick types of mesh cells are
very similar to cubic shapes. There are two resolutions in this kit. One of them is 4
mm (length) X 4 mm (width) X 3 mm (height) and the other one is 1.5 mm height
with the same length and width. The largest dimension 4 mm corresponds to λ/12.5
at 6 GHz. 6 GHz is the highest frequency of Anten’it kits.

CONTENT OF MULTI-MICROWAVE KIT

1. Metal Blocks

2. Dielectric Blocks with 3 different dielectric constants and colours

3. Ground Planes

4. Connectors

5. Electromagnetic Absorber Blocks

6. Cables

7. Adapters

8. 50 ohm Terminations

9. Removers

10. Case

11. Microwave Datasheet Booklet & Microwave Component Building Instructions

12. Anten’it User Manual

Anten’it can be ordered via distributors in www.antenit.com or [email protected]


Anten’it is a patent pending product of Antenom Antenna Technologies

You might also like