TECHNICAL SHEET ART.

Jet
Description High shoe in brown waxy grain leather with padded storm-cuff, 100% polyester lining, Non-Metallic HRP
Insole , ATOMIC Insole, double density polyurethane sole , bending resistant , abrasion resistant , oil resistant , slip
resistant , ESD.
Plus Midsole compound particularly studied to get a soft PU density for a higher comfort
Suggested sectors of usage Building/Construction, Utilities, Mechanical Industry, Farming/Zootechnics, Naval
Class: Industry, Professional / Craftsman.
EN ISO 20345:2011 Care and Maintenance clean periodically the outsole and the upper with no aggressive substances which could
S3 SRC compromise quality, safety and durability of the shoe, do not dry close to direct heat source.
Sizes: 36-48
Instep: 12
Weight(±10%): 610 gr. (*)

Complete shoe Norm Description Unit FTG Result EN ISO 20345

Requirements
Toe Cap: Non-Metallic TOP COMPOSITE toe cap, impact resistant 200 J 5.3.2.3 Impact resistance mm 15 ≥ 14
5.3.2.4 Compression resistance mm 15 ≥ 14

Midsole: no metallic HRP Insole with high tenacity fibres layers, ceramized and 6.2.1.1 Perforation resistance N 1.100 no ≥ 1.100
treated with plasma hole
ESD footwear: dissipation capacity of the electrostatic charge EN ISO 61340 Resistance to floor
5-1:2016 (footwear/floor resistance) Ohm 5.76 x 107 < 1,00 x 108 
Transverse resistance of the sole Ohm 5.13 x 107 ≤ 1,00 x 108
Chargeability V 14.27 V < 100 V

Capacity of Energy Absorption in the heel area 6.2.4 Energy absorption in the heel area J 26,0 ≥ 20
Upper: Brown waxy grain leather 5.4.6 Water vapour permeability mg/cm2 h 2.3 ≥ 0,8
Coefficient of permeability mg/cm2 19.9 ≥ 15
5.4.3 Tearing Strength N 158 ≥ 60
6.3 Water absorption % 13 ≤ 30
Water penetration g 0 ≤ 0,2
Vamp Lining: honeycomb finished polyester, breathable, abrasion resistant, black 5.5.3 Water vapour permeability mg/cm2 h 6,8 ≥ 2
colour Coefficient of permeability mg/cm2 54,4 ≥ 20
5.5.1 Tearing Strength N 25 ≥ 15
5.5.2 Abrasion resistance (dry) cycles no rupture 25.600
Abrasion resistance (wet) cycles no rupture 12.800
Quarter Lining: non slip textile 100% polyester, breathable, abrasion resistant, 5.5.3 Water vapour permeability mg/cm2 h 6,5 ≥ 2
light black colour Coefficient of permeability mg/cm2 54,3 ≥ 20
5.5.1 Tearing Strength N 27 ≥ 15
5.5.2 Abrasion resistance (dry) cycles no rupture 51.200
Abrasion resistance (wet) cycles no rupture 25.600
Insole lining: textile anti perforation midsole HRP insole 5.7.3 Water Absorption mg/cm2 76 ≥ 70
Ability to release water 99% ≥ 80%
Sole: double density polyurethane , bending resistant, abrasion resistant, oil 5.8.2 Tearing Strength kN/m 8,4 ≥ 8
resistant, slip resistant, ESD 5.8.3 Abrasion resistance mm3 100 ≤ 150
5.8.4 Bending resistance mm 1,5 ≤4
5.8.5 Hydrolysis mm 2,0 ≤6
6.4.2 Hydrocarbons resistance (volume increase) % 2,0% ≤ 12%
5.11 Slip resistance on ceramic floor with water and detergent flat 0,44 ≥ 0,32
Slip resistance on steel floor with glycerine inclined 0,31 ≥ 0,28
flat 0,20 ≥ 0,18
inclined 0,15 ≥ 0,13
Azocolourants free: no presence of dangerous substances by Annex VII to regulation no. 1907/2006/CE and subsequent amendments and additions
(*)
= Indicative weight that refers to ½ pair in size 42