Zenius Quick Guide - EN

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

How to Use a Nespresso Machine

www.nespresso.com/pro

ON/OFF
Step Checking OK
Press the power button to turn the machine on.
If they are blinking, the machine is still warming up.
Wait until the buttons stop blinking and remain lit.
If they are blinking red, fill the water tank with water.

Step Inserting a pod Lever

Open the lever and insert a Nespresso pod into the


pod insertion slot.
If the rim of a
Close the lever to the horizontal position. pod is bent,
straighten it out
When you open or close the lever, move it fully until before inserting
it stops. Otherwise, the pod may fall down. it.

Step Extracting coffee Coffee buttons


Place a cup under the coffee outlet. Press the RISTRETTO ESPRESSO LUNGO
desired coffee button.
The machine automatically starts extracting coffee
and automatically stops once the preset volume has
been served.
When extraction is finished, the button stops
blinking and remains lit. Remove the cup from the
cup support.
Hot Water
The lever is locked while the button is blinking.
Open the lever to drop the
Do not open the lever forcefully. Doing so may lead to
used pod. Pressing the Hot
personal injury or cause the machine to malfunction. Water button delivers 125 ml
of hot water (approximately
Step Ejecting the used pod 85°C).

Open the lever to eject the used pod into the


machine.
Close the lever to the horizontal position.
If you are unable to close the lever as far as it can go,
pull out the pod container.

You might also like