Page Divider

Page Divider
Page Divider
TABLE OF CONTENTS Document number
Revision
V3054-Z-MA-001 TOC section 10
5
Page 1

Section Title Document Number Rev.

Other Document Number

10 Drawings & Parts Lists

10.1 General Arrangement Drawing
10.2 Lubrication Chart
10.3 Assembly Drawing
10.4 Installation Drawing
10.5 Flow Diagram
10.6 Block Diagram
10.7 Termination Drawing
10.8 Loop Diagram
10.9 Layout Drawing
10.10 Circuit Diagram

nov.com
 Document number V3054-Z-MA-001 section 10.1
TABLE OF CONTENTS Revision: 1
Page: 1

Vol. Section Title Add. code Rev. Document number

Other document number

2 10.1 General Arrangement Drawing

General Arrangement Drawing, OC3932KCE Knuckle Boom Crane 1 V3054-C3932K-G0001
No. 1
Pride No. 2, 3D61100
General Arrangement Drawing, CABIN L, LEFT SIDE VERSION - 0 V3054-G8001
W=1700

R5325 Deep Ocean Clarion (Former Pride 2)

V3054 OC3932KCE-(17-85)-(42-18)(27) No 1

www.nov.com
National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-C3932K-G0001 Drawing Name: Drawing Revision: 1
Item No.: XV3054C3932KG0001 OC3932KCE Knuckle Boom Crane No. Updated: 20.10.2009
1 Pride
Item Group: DRAW
DRAWING GENERAL ARRANGEMENT DRAWING

Project: V3054 - OC3932KCE Knuckle Boom Crane No 1 Machine Number: V3054-0510

Customer: Samsung Heavy Industries Co, Ltd. Hull Number: 5325
Qty. Item Name Item No.
Pos.
Tag Drawing Reference
1 MAIN ASSEMBLY XOC3932KM02A0001

OC3932KM02-A0001

1 Knuckle Boom CraneNo.1 XV3054E0001

V3054-E0001

1 OC3932KCE Knuckle Boom Crane No. 1 XV3054H0001

V3054-H0001

0 Machine Tag Sign XV3054D0001

V3054-D0001

0 OC3932KM02 Knuckle Boom Crane XOC3932KM02L0001

OC3932KM02-L0001

0 OC3932KCE Knuckle Boom Crane No. 1 Inter XV3054I1001

V3054-I1001

www.nov.com PDFPartslist.exe (1.19.3579.17402) (XAL) 20.10.2009 09:48:10 Page: 1 of 1

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-G8001 Drawing Name: Drawing Revision: 0
Item No.: XV3054G8001 CABIN L, LEFT SIDE VERSION - W=1700 Updated: 04.10.2007
Item Group: DRAW
DRAWING GENERAL ARRANGEMENT DRAWING

Project: V3054 - OC3932KCE Knuckle Boom Crane No 1 Machine Number: V3054-0510

Customer: Samsung Heavy Industries Co, Ltd. Hull Number: 5325

Pos. Qty. Item Name Item No.

Tag Drawing Reference
1 STEEL S

1 CABIN L, RIGHT VERSION - W=1700 XV3054A8001

V3054-A8001

www.nov.com PDFPartslist.exe (1.20.3587.26867) (XAL) 23.11.2009 10:35:20 Page: 1 of 1

 Document number V3054-Z-MA-001 section 10.2
TABLE OF CONTENTS Revision: 1
Page: 1

Vol. Section Title Add. code Rev. Document number

Other document number

10.2 Lubrication Chart

Lubrication Charts, OC3932KM01 Knuckle Boom Crane 0 OC3932KM01-L0003

R5325 Deep Ocean Clarion (Former Pride 2)

V3054 OC3932KCE-(17-85)-(42-18)(27) No 1

www.nov.com
 Document number V3054-Z-MA-001 TOC section 10.3
TABLE OF CONTENTS Revision 4
Page 1

Section Title Document Number Rev.

Other Document Number

10.3 Assembly Drawing

Assembly Drawing, MAIN ASSEMBLY OC3932KM02-A0001 2
OC3932KM02

Assembly Drawing, PEDESTAL OC3932KM02-A1001 1

Assembly Drawing, King OC3932KM02-A2001 3

Assembly Drawing, King OC3932KM02-A2002 0

EL. MOTOR & PUMP TOWERS No. 1&2

Assembly Drawing, Main Boom OC3932KM02-A3001 2

Assembly Drawing, Knuckle Boom OC3932KM02-A4001 VOID

Assembly Drawing, CABIN L, RIGHT VERSION - W=1700 V3054-A8001 0

Assembly Drawing, Main Boom V1354-A3001 0

D1117 WINCH, API - 20T - SLW 4003 - 250M D1117-A0560 5

MAIN ASSEMBLY

Assembly Drawing, Boom & Cylinder Bolt S3120U-S9004 4

Ø200x305

Assembly Drawing, Boom & Cylinder Bolt S3120U-S9006 4

Ø250x390

Assembly Drawing, Boom & Cylinder Bolt S3120U-S9007 4

Ø280x415

Assembly Drawing, Knuckle Boom D1500-13-A4001 0

W/Reinforcement Brackets "Ensco" Type

Information Drawing, Cylinder Bracket Repair 16609503-INF 01

For Knuckle Boom

nov.com
National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: OC3932KM02-A0001 Drawing Name Drawing Revision 2
Item No.: XOC3932KM02A0001 MAIN ASSEMBLY Updated 30.04.2009
Item Group: DRAW OC3932KM02
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

01 1,00 PEDESTAL XOC3932KM02A1001 OC3932KM02-A1001

02 1,00 King XOC3932KM02A2001 OC3932KM02-A2001

03 1,00 Main Boom XOC3932KM02A3001 OC3932KM02-A3001

04 1,00 Knuckle Boom XOC3932KM02A4001 OC3932KM02-A4001

05 1,00 WIRE REEVING FOR Ø34MM WIRE XOC3932KM02M0001 OC3932KM02-M0001

06 1,00 ANGLE POTMETER No.1 XOC3932KM02S9004 OC3932KM02-S9004

07 1,00 ANGLE POTMETER No.1 XOC3932KM02S9005 OC3932KM02-S9005

08 1,00 ANGLE POTMETER No. 2 XOC3932KM02S9008 OC3932KM02-S9008

09 1,00 ANGLE POTMETER No.2 XOC3932KM02S9009 OC3932KM02-S9009

10 4,00 Boom & Cylinder Bolt XS3120US9004 S3120U-S9004

11 6,00 Boom & Cylinder Bolt XS3120US9006 S3120U-S9006

12 2,00 Boom & Cylinder Bolt XS3120US9007 S3120U-S9007

13 2,00 HYDR. CYLINDER 380/260 155319

14 2,00 HYDR. CYLINDER 450/340 155318

15 1,00 SIGNS XOC3932KM02I0003 OC3932KM02-I0003

PDFPartslist.exe (1.18.3365.15927) 04.05.2009 11:00:10 Page: 1 of 1

National Oilwell Norway AS
PARTS LIST
Customer Partslist

Pos Qty Item name Item no. Drawing Reference

01 1,00 PEDESTAL XOC3932KM02S1001 OC3932KM02-S1001

INSPECTION HATCH w/VENTILATION,

02 1,00 XS4110UA9013 S4110U-A9013
900x1250

PDFPartslist.exe (1.18.3265.23849) 10.12.2008 14:39:45 Page: 1 of 1

National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: OC3932KM02-A2001 Drawing Name Drawing Revision 3
Item No.: XOC3932KM02A2001 King Updated 30.04.2009
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

01 2,00 King XOC3932KM02A2002 OC3932KM02-A2002

02 2,00 Slew Connection Adaptor XOC3932KM02S2013 OC3932KM02-S2013

03 1,00 King XOC3932KM02S2002 OC3932KM02-S2002

04 1,00 King XOC3932KM02S2008 OC3932KM02-S2008

05 1,00 King XOC3932KM02S2007 OC3932KM02-S2007

06 1,00 King XOC3932KM02S2015 OC3932KM02-S2015

07 2,00 KING XOC3932KM02S2016 OC3932KM02-S2016

08 1,00 KING XOC3932KM02S2020 OC3932KM02-S2020

09 1,00 KING XOC3932KM02S2024 OC3932KM02-S2024

10 2,00 DRIP TRAY FOR SLEW GEARBOX PINIONS XOC3932KM02S9021 OC3932KM02-S9021

11 1,00 King XOC3932KM02S2014 OC3932KM02-S2014

12 1,00 King XOC3932KM02S2017 OC3932KM02-S2017

13 1,00 KING / PEDESTAL XOC3932KM02M2001 OC3932KM02-M2001

14 1,00 Winch XOC3932KM02M2005 OC3932KM02-M2005

15 4,00 DAMPER FOR CABIN XOC3932KM02M2003 OC3932KM02-M2003

16 1,00 CABIN L, LEFT SIDE VERSION - W=1700 XOC3932KM02G8001 OC3932KM02-G8001

TACHOMETER ASSEMBLY FOR WINCH AND

17 1,00 XS3010UA9001 S3010U-A9001
SLEW

18 1,00 Inspection Hatch 1500 X 898 XS4110UA9008 S4110U-A9008

21 2,00 REF OC3932KM01-H0002

22 4,00 REF OC3932KM01-E0004

PDFPartslist.exe (1.18.3365.15927) 04.05.2009 11:01:28 Page: 1 of 3

National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: OC3932KM02-A2001 Drawing Name Drawing Revision 3
Item No.: XOC3932KM02A2001 King Updated 30.04.2009
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

23 3,00 REF OC3932KM01-H0002

24 1,00 REF OC3932KM01-E0002

25 2,00 REF OC3932KM01-H0002

26 1,00 REF OC3932KM01-E0003

27 1,00 REF OC3932KM01-H0002

28 4,00 REF OC3932KM01-H0002

29 1,00 REF OC3932KM01-E0001

30 1,00 REF OC3932KM01-H0007

31 2,00 REF OC3932KM01-H0002

32 1,00 REF OC3932KM01-H0007

33 2,00 REF OC3932KM01-H0002

34 1,00 BUFFER, RUBBER 42501

35 3,00 BOLT, INNER HEX, M05 X 025MM 25606

36 3,00 WASHER, M05, A4-80 31311

37 3,00 NUT, M05, A4-80 26628

38 16,00 BOLT, HEX, M08 X 025MM 25227

39 32,00 WASHER, M08, A4-80 16410

40 16,00 NUT, M08, A4-80 13563

41 2,00 BOLT, HEX, M10 X 016MM 25238

42 4,00 BOLT, HEX, M10 X 025MM 26768

PDFPartslist.exe (1.18.3365.15927) 04.05.2009 11:01:28 Page: 2 of 3

National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: OC3932KM02-A2001 Drawing Name Drawing Revision 3
Item No.: XOC3932KM02A2001 King Updated 30.04.2009
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

43 4,00 BOLT, HEX, M10 X 070MM 24840

44 17,00 WASHER, M10, A4-80 18139

45 7,00 NUT, M10, A4-80 26630

46 6,00 BOLT, HEX, M12 X 020MM 25141

47 36,00 BOLT, HEX, M12 X 035MM 25144

48 28,00 BOLT, HEX, M12 X 045MM 25146

49 114,00 WASHER, M12, VG 26554

50 44,00 NUT, M12, VG 26642

51 8,00 BOLT, HEX, M14 X 050MM 60225

52 16,00 WASHER, M14, VG 26555

53 8,00 NUT, M14, VG 26643

54 6,00 BOLT, HEX, M16 X 050MM 25159

55 8,00 WASHER, M16, HDG 26556

56 2,00 NUT, M16, VG 26644

57 1,00 EYE BOLT, M10 168003

58 16,00 WASHER, M20, VG 26558

59 8,00 NUT, M20, HDG 26646

60 8,00 BOLT, HEX, M20 X 070MM 25177

61 1,00 REMOTE LUBRICATION FOR XOC3932KM02M2002 OC3932KM02-M2002

62 1,00 REMOTE LUBRICATION OF XOC3932KM02M2004 OC3932KM02-M2004

PDFPartslist.exe (1.18.3365.15927) 04.05.2009 11:01:28 Page: 3 of 3

 12 11 10 9 8 7 6 5 4 3 2 1

21 14 21
H A J H

22 38 39 40

16 18

E 21

G G
F
SECTION G-G ( 1 : 5 )
G F

6001
22
8

F F

48 49 50

8754
9

H
E
E DETAIL H ( 1 : 5 ) E

58 62

59

248
13 3
60

5 49
61 50

2141
D 48 D

3
4

SECTION F-F ( 1 : 5 )

11 29 1 9
3 1 62 REMOTE LUBRICATION OC3932KM02-
C SLEW BEARING M2004 C
B 3 1 61 REMOTE LUBRICATION OC3932KM02-
1 24 Fan BPH 50, OC3932KM02- REF. 73,4 kg CYLINDER BOLTS M2002
240V/60Hz/3ph, W/Grating E0002 8 60 M20x070MM, DIN933 8.8, HDG 25177 0,3 kg
26 1 11 Starter Cabinet Frame OC3932KM02- 114,9 kg 3 23 Return Filter BGT-4-1000S OC3932KM02- REF. 28,5 kg 3 37 M05, DIN934 A4-80 26628 0 kg 8 59 M20, DIN934 GRADE 8, HDG 26646 0,1 kg
S2014 H0002 3 36 M05, DIN125A A4 31311 0 kg 16 58 M20, DIN125A 140HV, HDG 26558 0 kg
2 10 Drip Tray OC3932KM02- 9,8 kg 4 22 Light Fixture 2x18w OC3932KM02- REF. 5,4 kg 3 35 M05x025MM, DIN912 A4-80 25606 0 kg 1 57 EYE BOLT, M10, DIN 444 AISI 316 168003. 0,1 kg
S9021 E0004 1 34 BUFFER, RUBBER 42501 0,6 kg 2 56 M16, DIN934 GRADE 8, HDG 26644 0 kg
1 9 Stairs Support OC3932KM02- 19,8 kg 2 21 COOLER, OIL/AIR 2,5kW OC3932KM02- REF. 157 kg 2 33 Ball Valve 1" OC3932KM02- REF. 0,7 kg 8 55 M16, DIN125A 140HV, HDG 26556 0 kg
S2024 FOR EL.MOTOR H0002 H0002 6 54 M16x050MM, DIN933 8.8, HDG 25159 0,1 kg
1 8 Oil Tank Hatch OC3932KM02- 22,8 kg 1 20 COVER FOR OC3932KM02- 8,6 kg 1 32 Control Valve SWS-B04-M OC3932KM02- REF. 3 kg 8 53 M14, DIN934 GRADE 8, HDG 26643 0 kg
S2020 MAINTENANCE POOL D2002 H0007 16 52 M14, DIN125A 140HV, HDG 26555 0 kg Tolerances except as noted Welding except as noted Total weight
B 2 7 Suction Manifold OC3932KM02- 173,3 kg 1 18 Inspection Hatch 1500 X S4110U-A9008. 59,1 kg 2 31 BVG 620002 OC3932KM02- REF. 49 kg 8 51 M14x050MM, DIN933 8.8, HDG 60225 0,1 kg ISO 13920-AE EN 287-1/2 B
ISO 2768-mK-E EN 288-1/2/3/4 40510 kg
S2016 898 W/ Ventilation DN150/PN16, 5512146 H0002 44 50 M12, DIN934 GRADE 8, HDG 26642 0 kg 3 30.04.2009 Reissued for Construction JAN JAN FRO
1 6 Return Manifold OC3932KM02- 45,8 kg 1 17 Tachometer For Winch & S3010U-A9001. 0,9 kg 1 30 HANDPUMP WITH OC3932KM02- REF. 7 kg 114 49 M12, DIN125A 140HV, HDG 26554 0 kg 2 04.03.2009 Reissued for Construction AMH AMH FRO
S2015 Slew HANDLE H0007 28 48 M12x045MM, DIN933 8.8, HDG 25146 0,1 kg 1 05.11.2008 Reissued for Construction KISP JAN FRO
1 5 Stairs/Ladder to Pedestal OC3932KM02- 163,3 kg 1 16 Cabin OC3932KM02- 1753,1 kg 1 29 Rotary Connection OC3932KM02- REF. 550 kg 36 47 M12x035MM, DIN933 8.8, HDG 25144 0 kg 0 20.12.2007 Issued for Construction KISP ZGT FRO
3 Rev. Date Description Made Checked Appr.
Platform S2007 G8001 750.1.6.3.21.8.EXD36 E0001 6 46 M12x020MM, DIN933 8.8, HDG 25141 0 kg This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
1 4 Stairs/Ladder to Top OC3932KM02- 109,3 kg 4 15 Damper For Cabin OC3932KM02- 2,7 kg 4 28 Check Valve 3" 3385-48-50 OC3932KM02- REF. 6,8 kg 7 45 M10, DIN934 A4-80 26630 0 kg only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
National Oilwell Norway AS
Platform S2008 M2003 H0002 17 44 M10, DIN125A A4 18139 0 kg consent of National Oilwell Norway AS. This document is to be returned
Servicebox 401, Korsvikfjorden
22 to National Oilwell Norway AS upon request and in any event upon
N-4604 Kristiansand, Norway
38 39 40 1 3 Structural Outfitting OC3932KM02- 21430,1 1 14 Winch OC3932KM02- 2707,7 kg 1 27 RETURN FILTER 300L OC3932KM02- REF. 5,7 kg 4 43 M10x070MM, DIN931 A4-80 24840 0,1 kg completion of the use for which it was loaned.
Title:
S2002 kg M2005 H0002 4 42 M10x025MM, DIN933 A4-80 26768 0 kg Assembly Drawing
2 2 Slew Block OC3932KM02- 34,6 kg 1 13 Slew Ring Bearing & OC3932KM02- 8686,2 kg 1 26 TEF 2440 002, IP66/67 OC3932KM02- REF. 1,9 kg 2 41 M10x016MM, DIN933 A4-80 25238 0 kg King
S2013 Slewgear M2001 E0003 16 40 M08, DIN934 A4-80 13563 0 kg
A 2 1 El. Motor And Pump Tower OC3932KM02- 1845,7 kg 1 12 Oil Level Indicator OC3932KM02- 9,9 kg 2 25 BREATHER FILTER OC3932KM02- REF. 0,4 kg 32 39 M08, DIN125A A4 16410 0 kg Scale: Projection: Size: Main Part: A
DETAIL J ( 1 : 5 ) 1:25 A1
No.1 A2002 S2017 H0002 16 38 M08x025MM, DIN933 A4-80 25227 0 kg Drawing Number: Sheet: Revision:

Qty. Pos Description/Dimension Drawing/Material Part No Unit wt. Qty. Pos Description/Dimension Drawing/Material Part No Unit wt. Qty. Pos Description/Dimension Drawing/Material Part No Unit wt. Qty. Pos Description/Dimension Drawing/Material Part No Unit wt. OC3932KM02-A2001 1 /3 3
12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H H

7338
C

2313

32 27 23 25 47 49 23
11 24
D
G G

3213
29
28
2130

60
5

F
14 M F
10
10

33
K
R1740
3

7437
N
E E
1

12 6
3551

17

SECTION E-E ( 1:25 )

D D

C
D

23
VIEW B ( 1:25 )
C C
44 42

47
46
27
49
49

48
Tolerances except as noted Welding except as noted Total weight
B ISO 13920-AE EN 287-1/2 B
30 ISO 2768-mK-E EN 288-1/2/3/4 40510 kg
10
3 30.04.2009 Reissued for Construction JAN JAN FRO
2
2 04.03.2009 Reissued for Construction AMH AMH FRO
1 05.11.2008 Reissued for Construction KISP JAN FRO
0 20.12.2007 Issued for Construction KISP ZGT FRO
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.

44 43 45 44 Reproduction, in whole or in part, or use of this design or distribution of

this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Norway AS
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
completion of the use for which it was loaned. N-4604 Kristiansand, Norway
Title:

DETAIL N ( 1 : 5 ) Assembly Drawing

DETAIL M ( 1 : 5 ) King
DETAIL K ( 1 : 5 ) DETAIL P ( 1 : 5 )
A Scale: Projection: Size: Main Part: A
1:25 A1
Drawing Number: Sheet: Revision:

OC3932KM02-A2001 2 /3 3
12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H H

22

V Q
41
G 20 G
55
R 44
DETAIL V ( 1 :5410 )

17

22 T

7
F F
58 59 60
DETAIL S ( 1 : 5 )

31

E E

S 5

SECTION C-C ( 1:25 )

D D

35 37 36 32
8
SECTION D-D ( 1:25 )
49 47

57 49 50

45 45
C C
3
44 44

U U DETAIL R ( 1 : 5 ) DETAIL T ( 1 : 5 )
45
4
44

51
54
34 52
55
B B
21 3 30.04.2009 Reissued for Construction JAN JAN FRO
2 04.03.2009 Reissued for Construction AMH AMH FRO
1 05.11.2008 Reissued for Construction KISP JAN FRO
0 20.12.2007 Issued for Construction KISP ZGT FRO
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
56 Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
53 consent of National Oilwell Norway AS. This document is to be returned
to National Oilwell Norway AS upon request and in any event upon
National Oilwell Norway AS
Servicebox 401, Korsvikfjorden
N-4604 Kristiansand, Norway
55 completion of the use for which it was loaned.
Title:
52
Assembly Drawing
King
DETAIL Q ( 1 : 5 )
A SECTION U-U ( 1 : 10 ) VIEW A ( 1:25 )
Scale:
1:25
Projection: Size:
A1
Main Part: A
Drawing Number: Sheet: Revision:

OC3932KM02-A2001 3 /3 3
12 11 10 9 8 7 6 5 4 3 2 1
National Oilwell Norway AS
Customer Parts List
Drawing No.: OC3932KM02-A2002 Drawing Name: Drawing Revision: 0
Item No.: XOC3932KM02A2002 King Updated: 20.12.2007
Item Group: DRAW EL. MOTOR & PUMP TOWERS No. 1&2
DRAWING ASSEMBLY DRAWING

Qty Item No. Drawing Reference

Pos
Unit Wgt. Item Name Tag No.
2 REF OC3932KS01-H0002
01
0,00 Main pump stack

1 144741
02
13,10 BELL HOUSING

1 49783
03
14,00 SPIDEX HUB

1 96001
04
0,50 SPIDEX SPIDER

1 155074
05
15,00 SPIDEX HUB

2 REF OC3932KS01-E0001
06
0,00 Main motor

2 REF
07
0,00 PIPE ø112.6/ø90x70, S235JR

8 24711
08
0,35 BOLT, HEX, M20 X 120MM

8 26646
09
0,06 NUT, M20

24 26558
10
0,02 WASHER, M20

8 25172
11
0,17 BOLT, HEX, M20 X 045MM

8 25445
12
0,16 BOLT, INNER HEX, M20 X 035MM

1 XOC3932KM02D2001 OC3932KM02-D2001
13
SPACER RING FOR EL. MOTOR;;DETAIL
1,00
DRAWING

Total weight 49,94

www.nov.com PDFPartslist.exe (1.21.3635.18246) (XAL) 21.02.2010 12:49:37 Page: 1 of 1

 12 11 10 9 8 7 6 5 4 3 2 1

H H

G G

1
1
12

A 3 2
F F
5 3

4 5
14
345

11 10 4
15
2981

13
KING BOTTOM PLATE

15
A
E 8 9 10 E

TIGHTENING OF BOLTS
8 10 10 9 ALL BOLTS SLIGHTLY OILED
Excerpt from HL/TP-15
Torque [Nm]
Size Grade 8.8, Grade 10.9, A4-80
6 HDG Phosphated
M8 26 28 22
6 M10 50 56 44
1405

M12 87 98 76
SECTION A-A ( 1 : 5 ) M14
M16
137
211
156
238
121
187
M18 294 332 260
M20 412 465 364
M22 554 626 490
M24 712 804 629
M27 1028 1161 909
D M30 1402 1582 1240 D
M33 1894 2133 1670
M36 2440 2761 2160
M39 3135 3543 2770

1 13 SPACER RING OC3932KM02- 2,6 kg

D2001
4 12 M20x035MM, DIN912 12.9, BLACK 25445 0,2 kg
8 11 M20x045MM, DIN933 8.8, HDG 25172 0,2 kg
24 10 M20, DIN125A 140HV, HDG 26558 0,0 kg
8 9 M20, DIN934 GRADE 8, HDG 26646 0,1 kg
8 8 M20x120MM, DIN931 8.8, HDG 24711 0,4 kg
C 1 6 Electric Motor ABB OC3932KM02- REF. 1400,0 kg C
315LC4/485KW E0001
1 5 090/100 RED 95¤ Polyuretan 95º 96001 0,5 kg
SHORE ShoreA
1 4 Spidex Hub S355J2G3 155074 2,0 kg
1 3 Spidex Hub S355J2G3 49783 2,0 kg
1 2 Bell Housing 144741 51,2 kg
RV660/345/360
2 1 Axial Piston Pump OC3932KM02- REF. 172,0 kg
PV270R1L1MMNFFP H0002
Qty. Pos Description/Dimension Drawing/Materia Part No. Unit wt.
Tolerances except as noted Welding except as noted Total weight
B ISO 13920-AE EN 287-1/2 B
ISO 2768-mK-E EN 288-1/2/3/4 1830 kg

0 20.12.2007 Issued for Construction KISP ZGT FRO

Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Norway AS
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
completion of the use for which it was loaned. N-4604 Kristiansand, Norway
Title:

Assembly Drawing
King
EL. MOTOR & PUMP TOWERS No. 1&2
A Scale: Projection: Size: Main Part: A
1:10 A1
Drawing Number: Sheet: Revision:

OC3932KM02-A2002 1 /1 0
12 11 10 9 8 7 6 5 4 3 2 1
National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: OC3932KM02-A3001 Drawing Name Drawing Revision 2
Item No.: XOC3932KM02A3001 Main Boom Updated 29.04.2009
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

01 1,00 MAIN BOOM XOC3932KM02S3004 OC3932KM02-S3004

02 4,00 FLOODLIGHT XS4210UA9001 S4210U-A9001

03 4,00 BUFFER, RUBBER 26700

04 8,00 BOLT, INNER HEX, M12 X 090MM 25653

05 16,00 WASHER, M12, A4-80 47853

06 8,00 LOCK NUT, M12 A4-80 18213

07 2,00 NOV NAME PLATE WORLDMARK 3M-100 FOLIE 168997

08 48,00 BOLT, HEX, M08 X 025MM 25227

09 48,00 NUT, M08, A4-80 13563

10 96,00 WASHER, M08 29793

11 1,00 MAINBOOM XOC3932KM02M3001 OC3932KM02-M3001

12 1,00 REMOTE LUBRICATION OF XOC3932KM02M3002 OC3932KM02-M3002

PDFPartslist.exe (1.18.3365.15927) 04.05.2009 11:00:01 Page: 1 of 1

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-A8001 Drawing Name: Drawing Revision: 0
Item No.: XV3054A8001 CABIN L, RIGHT VERSION - W=1700 Updated: 04.10.2007
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Project: V3054 - OC3932KCE Knuckle Boom Crane No 1 Machine Number: V3054-0510

Customer: Samsung Heavy Industries Co, Ltd.

Qty Item No. Drawing Reference

Pos
Unit Wgt. Item Name Tag No.
1 S

1,00 STEEL

1 XD1123S8102 D1123-S8102
1 CABIN L, RIGHT VERSION,
572,72 W=1700;STRUCT.ASSEMBLY 2 OF 2;DETAIL
ARRANGEMENT DRAWING
1 160157
2
0,00 DOOR, A60, LEFT HINGED

1 XD1123S8005 D1123-S8005
3
AIR INLET VENT;F/ CABIN W/
1,40
DEFROSTER;INTRG. IN CHAIR FOUNDATION
1 XD1123S8063 D1123-S8063
4
GRID FOR ROOF WINDOW;CABIN L,
1,00
B=1700;ASSEMBLY
1 XD1123A8003 D1123-A8003
5
DEFROSTER BOX/CHAIR
76,97
FUND.;ASSEMBLY;W/FAN & HEATER
1 XD1123A8063 D1123-A8063
6
DISTRIBUTION BOX;CABIN L,
3,38
B=1700;ASSEMBLY DRAWING
1 XD1123A8172 D1123-A8172
7
COVER FOR AIR CONDITION UNIT;TYP AHC-
47,00
W12A;ASSEMBLY DRAWING
1 XD1123A8090 D1123-A8090
8
OUTLET VENT SYSTEM;INSIDE CABIN L AND
7,68
XL;ASSEMBLY DRAWING
1 XD1123D8231 D1123-D8231
9
INSULATION / CLADDING;CABIN L;DETAIL
378,66
ARRANGEMENT DRAWING
1 XD1123D8119 D1123-D8119
10
WINDOWS FOR CABIN L,
434,67
B=1700;ASSEMBLY;WINDOWS/LAMINATED
1 XD1123A8133 D1123-A8133
11
OPERATOR`S CHAIR;RECARO SPECIALIST
46,02
L;ASSEMBLY DRAWING
1 XD1123D8120 D1123-D8120
12
30,30 SUNBLINDS FOR CABIN L,;B=1700;

1 XD1123D8043 D1123-D8043
13
WINDOWS FLUSHING
7,86
SYSTEM;ASSEMBLY;DETAIL DRAWING

www.nov.com PDFPartslist.exe (1.21.3635.18246) (XAL) 21.02.2010 12:51:17 Page: 1 of 3

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-A8001 Drawing Name: Drawing Revision: 0
Item No.: XV3054A8001 CABIN L, RIGHT VERSION - W=1700 Updated: 04.10.2007
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Project: V3054 - OC3932KCE Knuckle Boom Crane No 1 Machine Number: V3054-0510

Customer: Samsung Heavy Industries Co, Ltd.

Qty Item No. Drawing Reference

Pos
Unit Wgt. Item Name Tag No.
1 XD1123D8060 D1123-D8060
14 WIPERSYSTEM F/ FRONT- AND
35,58 SIDEWINDOWS;SWF 106399 24V DC, 90
GR.;ASSEMBLY CABIN L
1 XD1123D8041 D1123-D8041
15
WIPER SYSTEM ROOF;W/ WIPERMOTOR 24V
10,30
DC;ARM=600MM, BLADE=600MM
1 XD1123D8038 D1123-D8038
16
MOUNTING DAMPER;CRANE FRAME F/
5,17
CABIN;DETAIL DRAWING
1 XD1123D8200 D1123-D8200
17
SUPPORT, MOVABLE TYP FOR
2,73
DISPLAY;;ASSEMBLY DRAWING
1 XD1123S8139 D1123-S8139
BRACKET AND STEP FOR
1,00 DEFROSTERBOX;FREE-STANDING TYPE;DETAIL
ARRANGEMENT DRAWING
1 XD1123S8058 D1123-S8058
FOUNDATION FOR CHAIR;CABIN;DETAIL
8,80
ARRANGEMENT DRAWING
1 XD1123D8076 D1123-D8076
INSTRUCTOR SEAT;CABIN XL & L;DETAIL
2,00
DRAWING
1 XD1123D8212 D1123-D8212
COVER FOR EL. CABLE TRAY;IN FLOOR - CABIN
0,00
L, W=1700;DETAIL ARRANGEMENT DRAWING
1 XD1123S8096 D1123-S8096
BRACKET FOR 6" MONITOR;ORLACO TFT 6" UNI
0,60
- DETAILS;DETAIL ARRANGEMENT DRAWING
1 XD1123A8135 D1123-A8135
SIDEPANEL FOR TOA, VHF AND
7,20
UHF;;ASSEMBLY DRAWING
1 XV3054A8002 V3054-A8002
CABIN L, RIGHT VERSION - W=1700;INSIDE
1,00
VIEW;DETAIL ARRANGEMENT DRAWING
1 48069

0,00 DOOR PUMP WITH ARM AND PLATE

1 XD1123S8189 D1123-S8189
COVER FOR EL. HOSES BEHIND;CHAIR
1,00 FOUNDATION - CABIN LARGE;ASSEMBLY
DRAWING
0 20054174

0,00 KEY, COPY OF KEY, TOGETHER WITH TO59010S

www.nov.com PDFPartslist.exe (1.21.3635.18246) (XAL) 21.02.2010 12:51:17 Page: 2 of 3

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-A8001 Drawing Name: Drawing Revision: 0
Item No.: XV3054A8001 CABIN L, RIGHT VERSION - W=1700 Updated: 04.10.2007
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Project: V3054 - OC3932KCE Knuckle Boom Crane No 1 Machine Number: V3054-0510

Customer: Samsung Heavy Industries Co, Ltd.

Qty Item No. Drawing Reference

Pos
Unit Wgt. Item Name Tag No.

Total weight 1684,04

www.nov.com PDFPartslist.exe (1.21.3635.18246) (XAL) 21.02.2010 12:51:17 Page: 3 of 3

National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: V1354-A3001 Drawing Name Drawing Revision 0
Item No.: XV1354A3001 Main Boom Updated 25.06.2009
Item Group: DRAW
DRAWING ASSEMBLY DRAWING

Project: V1354 - OC3932KCE Knuckle Boom Crane No 1 Machine Number:

Customer: Samsung Heavy Industries C0, Ltd. Hull Number: 5316

Pos Qty Item name Item no. Drawing Reference

01 1,00 MAIN BOOM XV1354S3004 V1354-S3004

02 4,00 FLOODLIGHT XS4210UA9001 S4210U-A9001

03 4,00 BUFFER, RUBBER 26700

04 8,00 BOLT, INNER HEX, M12 X 090MM 25653

05 16,00 WASHER, M12, A4-80 47853

06 8,00 LOCK NUT, M12, NYLOC 18213

07 2,00 NOV Name Plate Worldmark XV1354D3001 V1354-D3001

08 48,00 BOLT, HEX, M08 X 025MM 25227

09 48,00 NUT, M08, A4-80 13563

10 96,00 WASHER, M08 29793

11 1,00 MAINBOOM XOC3932KM02M3001 OC3932KM02-M3001

12 1,00 REMOTE LUBRICATION OF XOC3932KM02M3002 OC3932KM02-M3002

PDFPartslist.exe (1.18.3365.15927) 07.07.2009 10:22:53 Page: 1 of 1

National Oilwell Norway AS
PARTS LIST
Draw number . . . : D1117-A0560 Document Name Drawing revision . . . . . . : 5 18/09-07
Item No. . . . . . . . . . : XD1117A0560 API - 20T - SLW 4003 - 250M
MAIN ASSEMBLY
D1117 WINCH
Item group . . . . . . : DRAW DRAWING

Pos Drawing Referance Quantity Item name /Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

01 D1117-A0686 1,00 SLACK WIRE INDICATOR XD1117A0686 Yes 6,88

ASSEMBLY
D1117 WINCH

02 D1117-01534 4,00 BUSHING Ø21/40/50 L40/50 XD111701534 Yes 0,40

FOR FOUNDATION DISTANCE BAR
DETAIL DRAWING

03 D1117-01959 3,00 WIRE CLAMP 28-34mm CC60-Ï13 R18 XD111701959 Yes 0,70

D1117 - WINCH

04 D1117-01966 1,00 INITSIATOR BRACKET XD111701966 Yes 0,20

DETAILS
D1117 - WINCH

05 D1117-02110 1,00 API - 20T - SLW 4003 - 250M XD111702110 Yes 1.042,00
DRUM DETAILS
D1117 WINCH

06 D1117-02111 1,00 API - 20T - SLW 4003 - 280M XD111702111 Yes 182,00
FOUNDATION - 1 DETAILS
D1117 WINCH

07 D1117-02112 1,00 API - 20T - SLW 4003 - 280M XD111702112 Yes 182,00
FOUNDATION -2 DETAILS
D1117 WINCH

08 D1117-02222 1,00 API - 20T - SLW 4003 - 280M XD111702222 Yes 23,20
PROTECTION CAGE
D1117 WINCH

09 D1117-02114 2,00 API - 20T - SLW 4003 - 280M XD111702114 Yes 18,20
DISTANCE BAR AND BOLT
D1117 WINCH

M01 1,00 GEARBOX COMPLETE 154901 No 382,00

SLW4003-G3/../56,8/FL960.10C OR AD
SEE NOTE CW

HL100: Date 24/09-07 08:56 Page 1

National Oilwell Norway AS
PARTS LIST
Draw number . . . : D1117-A0560 Document Name Drawing revision . . . . . . : 5 18/09-07
Item No. . . . . . . . . . : XD1117A0560 API - 20T - SLW 4003 - 250M
MAIN ASSEMBLY
D1117 WINCH
Item group . . . . . . : DRAW DRAWING

Pos Drawing Referance Quantity Item name /Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

M02 1,00 GEARBOX COMPLETE 154902 No 382,00

SLW4003-G3/../56,8/FL960.10C AO AD
SEE NOTE CCW

M03 1,00 LEBUS SPLIT SLEEVE, WELD-ON, LEFTHAND 154947 No 320,00

WIRE Ø34 PCD710/654/1315,3
SEE NOTES / DOCUMENT

M04 44,00 BOLT, HEX, M24 X 060MM 89120672002 No 0,31

M24x060MM, DIN 933, 10.9, BLACK

M05 44,00 WASHER, M24 19050 No 0,03

M24, DIN 6916, HDG

M06 36,00 BOLT, INNER HEX, M24 X 080MM 89120471002 No 0,40

M24x080MM, DIN 912, 10.9, BLACK

M07 6,00 BOLT, HEX, M12 X 070MM 24649 Yes 0,08

M12X070MM, DIN 931, 8.8, HDG
2-BOKS SYSTEM

M08 6,00 WASHER, M12, VG 26554 Yes 0,01

M12, DIN 125A,STEEL,HDG
2-BOKS SYSTEM

M09 8,00 BOLT, HEX, M12 X 040MM 25145 Yes 0,05

M12X040MM, DIN 933, 8.8, HDG
2-BOKS SYSTEM

M10 8,00 WASHER, M12, VG 26554 Yes 0,01

M12, DIN 125A,STEEL,HDG
2-BOKS SYSTEM

M11 2,00 BOLT, HEX, M12 X 030MM 25143 Yes 0,04

M12X030MM, DIN 933, 8.8, HDG
2-BOKS SYSTEM

HL100: Date 24/09-07 08:56 Page 2

National Oilwell Norway AS
PARTS LIST
Draw number . . . : D1117-A0560 Document Name Drawing revision . . . . . . : 5 18/09-07
Item No. . . . . . . . . . : XD1117A0560 API - 20T - SLW 4003 - 250M
MAIN ASSEMBLY
D1117 WINCH
Item group . . . . . . : DRAW DRAWING

Pos Drawing Referance Quantity Item name /Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

M12 2,00 WASHER, M12, VG 26554 Yes 0,01

M12, DIN 125A,STEEL,HDG
2-BOKS SYSTEM

M13 4,00 NUT, M20, VG 26646 Yes 0,06

M20, DIN934, GRADE 8,HDG
2-BOKS SYSTEM

M14 4,00 WASHER, M20, VG 26558 Yes 0,02

M20, DIN 125A,STEEL,HDG
2-BOKS SYSTEM

M15 4,00 PAL-NUT, M20 27173 Yes 0,01

M20, DIN 7967, HDG
2 BOKS SYSTEMET

M16 4,00 CLAMP WELDING PLATE 16MM STEEL 142237 No 0,00

APK2

Total weight = 2591,10

HL100: Date 24/09-07 08:56 Page 3

 12 11 10 9 8 7 6 5 4 3 2 1

H H

Hoist

B
A M04 M05
03 08
M05 M04 5
06

5 M07 M08
07
M10 M09
G G

1110
520

D
C
D
F C F
A 04
09
 0,5 A  0,5 A B A  0,5 A
128,5 1315,3 128,5
507,5 507,5 1572,3 1 1206

2970

E
E E

M11 M12

04

M15 M14 M13 09

02

D D

09

INITIATOR BRACKET C-C ( 1 : 2 )

D-D ( 1 : 2 )

C C

05 TECHNICAL DATA
07
06 M03 LEBUS GROOVING SWL: 17T
WIRE: Ø34
M06 M06 MAX WIRE CAPACITY 3 LAYERS: 265M
MAX WIRE CAPACITY STORAGE: 350M
WINCH WEIGHT: APPROX. 2700 Kg.
890 STEEL WEIGHT: APPROX. 1500 Kg.
1040

Tolerances except as noted Welding except as noted Total weight

B ISO 13920-AE EN 287-1/2 B
ISO 2768-mK-E EN 288-1/2/3/4

40° a
5 18.09.2007 Reissued for Construction DBA NØR YNB
4 01.12.2006 Reissued for Construction DBA NØR YNB

ppr o
3 14.07.2006 Reissued for Construction DBA NØR YNB
5 2 10.07.2006 Reissued for Construction DBA NØR YNB

x.
M01 M02
01 Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Norway AS
Servicebox 401, Korsvikfjorden
09 to National Oilwell Norway AS upon request and in any event upon
completion of the use for which it was loaned. N-4604 Kristiansand, Norway
A-A ( 1 : 10 ) B-B ( 1 : 10 ) Title:

D1117 WINCH
API - 20T - SLW 4003 - 250M
MAIN ASSEMBLY
A Scale: Projection: Size: Main Part: A
1:10 A1
Drawing Number: Sheet: Revision:

D1117-A0560 1 /1 5
12 11 10 9 8 7 6 5 4 3 2 1
National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: S3120U-S9004 Drawing Name Drawing Revision 4
Item No.: XS3120US9004 Boom & Cylinder Bolt Updated 23.03.2009
Item Group: DRAW Ø200x305
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

1 2,00 POLYPENCO THRUST BEARING 95764

2 1,00 ORKOT BUSHING, ORKOT TXMM 96400

3 2,00 V-RING 300 167462

4 1,00 BOOM AND CYLINDER BOLT 169116

5 1,00 BOLT, HEX HEAD, W/LUBE NIPPLE, M24 16501

6 3,00 BOLT, HEX, M24 X 070MM 25189

7 3,00 WASHER, M24 41506

8 1,00 WASHER, M24, HDG 26560

9 2,00 CAP, RED PLASTIC 173659

PDFPartslist.exe (1.18.3365.15927) 07.04.2009 13:48:09 Page: 1 of 1

 12 11 10 9 8 7 6 5 4 3 2 1
A-A 2
B (1:1) D (1:1) 2
H
MOUNTING DETAILS KING / MAIN BOOM 1,5 1,5 H
& MAIN BOOM / KNUCKLE BOOM 1
1
( TYP. )
note
4.1 note
note note
5.3 5.2
5.2

9
A

G note G
note 5.5
5.4

note 3
5.5 3
note note 23
5.5 5.7 21
7 6
OUTSIDE
INSIDE
5 8 NOTES
F F
1. DETAIL OF CYLINDER / BOOM BOLTS AND END PLATES,
REF. DWG. S3120U-S9017.
A 2. MACHINING DETAILS FOR BOSS IN SUPPORT STRUCTURE,
note REF. DWG. S3120U-S9004, SHEET 2/3.
4
5.8 3. BOLT POS. 6, TO BE TORQUED TO 350 Nm.
BOLT POS. 5, TO BE TORQUED TO 350 Nm.

MOUNTING DESCRIPTION:
4.1 TACK GLUE THE V-RING TO THE STRUCTURE USING LOCTITE 480.
6 7 (USE A MINIMUM OF LOCTITE)
note
E 5.6 THE TACK-GLUING SHALL BE PERFORMED ON 2-4 POS. ONLY AND E
ALL THE POSITIONS SHALL BE ACCESSIBLE AFTER FINAL INSTALLATION.
5.1 SHRINK THE OD OF THE BUSHING (POS.2) IN LIQUID NITROGEN
B note
note
FOR APPROX. 10-20 MIN. AND INSTALL THE BUSHING.
5.6
5.1 5.2 FILL UP THE VOID BETWEEN THE CYLINDER / BOOM BOLT
C-C AND THE AREA INSIDE THE PERIMETER OF THE V-RINGS
note MOUNTING DETAILS WITH STANDARD EP2 GREASE.
5.8 STANDARD MAIN & KNUCKLE CYLINDERS 5.3 APPLY STANDARD EP2 GREASE ON THE ENTIRE SURFACE
( TYP. ) OF THE CYLINDER / BOOM BOLT AND INSTALL BOLT.
note 5.4 FILL THE LOOSE ENDPLATE WITH EP2 GREASE AND INSTALL.
C 4.1 5.5 LUBRICATE WITH EP2 GREASE AND INSTALL SECURING BOLT
D note D
note (POS. 6), NORLOCK WASHER (POS. 7) AND BOLT w/LUB. NIPPLE
5.5
5.3 (POS. 5) INCLUDING WASHER (POS. 8).
5.6 SEAL OF ENDPLATES WITH MARINE SEALING.
7
5.7 FILL UP REMAINING VOIDS WITH EP2 GREASE TROUGH THE
6
LUB. NIPPLE.
5.8 APPLY STANDARD EP2 GREASE ON THE CAP
note AND INSTALL THE CAPS.
5.4
6. REPAIR OR REPLACEMENT OF V-RING
note IF THE V-RING NEEDS TO BE REPLACED WITH THE BOOM OR
C 5.5 CYLINDER IN POSITION, THE V-RING CAN BE CUT AND JOINED C
BY GLUING.
5 8 GLUING PROCEDURE:
7 6 APPLY LOCTITE POLYOLEFIN PRIMER TYPE 770 ON THE CUTTED FACES
C 9
OUTSIDE FOR APPROX. 1 HOUR PRECONDITIONING.
INSIDE THEN GLUE THE CUTTED FACES TOGETHER USING LOCTITE 406.
note note
5.5 5.7
NOTE Tolerances except as noted Welding except as noted Total weight
1 ISO 13920-AE EN 287-1/2
Bolt assembly suitable for ( -due to bolt material ) ISO 2768-mK-E EN ISO 15614-1/2 101 kg
B B
DnV Lifting Appliance - down to Td= -20C°
ABS Lifting Appliance- down to Td= -10C° 4 23.03.2009 Reissued for Construction JAN JAN ODH
3 04.09.2008 Reissued for Construction JAN KISP ODH
2 18.06.2008 Reissued for Construction JEF JAN ODH
1 18.01.2006 Reissued for Construction YVW YVW THL
Rev. Date Description Made Checked Appr.

note 2 9 DBI-DUT N410037 CAP, RED PELD 0,01 kg 173659 This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
1 8 M24, DIN125A 140HV, HDG 0,0 kg 26560 only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
5.6 this information to others is not permitted without the express written
National Oilwell Norway AS
3 7 M24, NORLOCK STAINLESS A4 0,018 kg 41506 consent of National Oilwell Norway AS. This document is to be returned
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
N-4604 Kristiansand, Norway
3 6 M24x070MM, DIN933 8.8, HDG 0,4 kg 25189 completion of the use for which it was loaned.
Title:
1 5 M24x050MM, DIN933, W/LUBE NIPPLE 8.8, HDG 0,3 kg 16501 Assembly Drawing
D
note note
1 4 BOLT ø200x305, AISI 316L CLADDING S355J2+N 96,6 kg 169116 Boom & Cylinder Bolt
5.6
2 3 V-300-A FPM VITON Rubber, FPM VITON 0,3 kg 167462 Ø200x305
A 5.1 1 2 BUSHING Ø220/Ø200x160 Orkot TXMM 1,3 kg 96400 Scale: Projection: Size: Main Part: A
1:2 A1
2 1 BEARING Ø250/201x13 Polypenco Nylatron GSM 0,3 kg 95764 Drawing Number: Sheet: Revision:

Qty. Pos. Description/Dimension Drawing/Material Unit wt. PART No. S3120U-S9004 1 /3 4

12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H MACHINING DETAILS MACHINING DETAILS H

KING, KNUCKLE BOOM REAR END & CYLINDER BRACKETS ( TYP. ) MAIN BOOM, BOTH FRONT & REAR END ( TYP. )
185 (BEFORE MACH.)

PROJECT SPECIFIED WELD 60 (BEFORE MACH.) 185 (BEFORE MACH.) 60 (BEFORE MACH.)

2xM24 - 45 DEEP

12,5
EQUALLY SPACED

G G

6,3
0,5
9,5 160 +- 0 9,5
0,5
189 +- 0
58 58

Ø250

Ø300
Ø250 +- 0,5
n220 H7

PCD Ø280

n202 F8

n198 F8
0
Ø370

Ø300

F F

b 0,5

6,3
6,3

b 0,5
6,3

E 3 E
TYP. ( SEAL WELD BEFORE MACH. )

2 2
14 = = 14 56 193 ± 1 56

305
89,5 89,5

179 ± 0,5
D MACHINING ORDER D
MAIN BOOM, BOTH FRONT & REAR END
PAINTING GUIDE (TYP.)
KING, KNUCKLE BOOM REAR END (NOT IN SCALE!)
& CYLINDER BRACKETS
( TYP. NOT IN SCALE )
AREA OUTSIDE DIAMETER Ø250
TO BE PAINTED TO FULL SPECIFICATION

C C

CUT 1;
TO BE MACHINED 360 ~
BEFORE WELDING

CUT 2; Tolerances except as noted Welding except as noted Total weight

ISO 13920-AE EN 287-1/2
TO BE MACHINED 360~ ISO 2768-mK-E EN ISO 15614-1/2 101 kg
B B
AFTER WELDING
4 23.03.2009 Reissued for Construction JAN JAN ODH
3 04.09.2008 Reissued for Construction JAN KISP ODH
2 18.06.2008 Reissued for Construction JEF JAN ODH
1 18.01.2006 Reissued for Construction YVW YVW THL
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Norway AS
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
AREA OUTSIDE DIAMETER Ø300mm TO BE completion of the use for which it was loaned. N-4604 Kristiansand, Norway
AREA INSIDE DIAMETER Ø250 TO BE PAINTED TO FULL SPESIFICATION. Title:

PROTECTED USING TECTYLE Assembly Drawing

Boom & Cylinder Bolt
Ø200x305
A AREA INSIDE DIAMETER Ø300mm TO BE Scale: Projection: Size: Main Part: A
PROTECTED USING TECTYLE 1:2 A1
Drawing Number: Sheet: Revision:

S3120U-S9004 2 /3 4
12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

MACHINING DETAILS
H H
MOUNTING ILLUSTRATION OF MAIN CYLINDERS CYLINDER ONLY
( NOT IN SCALE ) 4 ( TYP. )
309 ± 0,5
2 x M24 -45 DEEP
EQUALLY SPACED 189 ± 0,5

KING STRUCTURE
G G
4

Max. 180
PCD Ø280

Ø202 F8

Ø198 F8
Ø320

Ø320
F NOTE 1 F

6,3 6,3

12,5

Min. 225
12,5
b 0,5

E E
PRESSURE EQUALIZATION

NOTE 1

MOUNTING ILLUSTRATION OF KNUCKLE CYLINDERS

D D
( NOT IN SCALE )

C C

MAIN BOOM STRUCTURE

Tolerances except as noted Welding except as noted Total weight
ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN ISO 15614-1/2 101 kg
B B
MACHINING GUIDE FOR HOLES IN CYLINDER FORK: 4 23.03.2009 Reissued for Construction JAN JAN ODH
3 04.09.2008 Reissued for Construction JAN KISP ODH
2 18.06.2008 Reissued for Construction JEF JAN ODH
1. LOCATION OF MAIN HYDRAULIC CONNECTION FOR MAIN BOOM CYLINDER 1 18.01.2006 Reissued for Construction YVW YVW THL
TO BE LOCATED ON THE SAME SIDE AS HOLE ø202mm. Rev. Date Description
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
Made Checked Appr.

only and remains the property of National Oilwell Norway AS.

Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
National Oilwell Norway AS
NOTE 2 2. LOCATION OF HYDRAULIC CONNECTION FOR KNUCKLE BOOM CYLINDER consent of National Oilwell Norway AS. This document is to be returned
to National Oilwell Norway AS upon request and in any event upon
completion of the use for which it was loaned.
Servicebox 401, Korsvikfjorden
N-4604 Kristiansand, Norway
TO BE LOCATED ON THE SAME SIDE AS HOLE ø198mm. Title:

Assembly Drawing
Boom & Cylinder Bolt
Ø200x305
A Scale: Projection: Size: Main Part: A
1:2 A1
Drawing Number: Sheet: Revision:

S3120U-S9004 3 /3 4
12 11 10 9 8 7 6 5 4 3 2 1
National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: S3120U-S9006 Drawing Name Drawing Revision 4
Item No.: XS3120US9006 Boom & Cylinder Bolt Updated 23.03.2009
Item Group: DRAW Ø250x390
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

1 2,00 POLYPENCO THRUST BEARING 93102

2 1,00 ORKOT BUSHING, ORKOT TXMM 96448

3 2,00 V-RING 350 167463

4 1,00 BOOM AND CYLINDER BOLT 169118

5 1,00 BOLT, HEX HEAD, W/LUBE NIPPLE, M24 16501

6 3,00 BOLT, HEX, M24 X 080MM 30491

7 3,00 WASHER, M24 41506

8 1,00 WASHER, M24, HDG 26560

9 2,00 CAP, RED PLASTIC 173659

PDFPartslist.exe (1.18.3365.15927) 07.04.2009 13:48:49 Page: 1 of 1

 12 11 10 9 8 7 6 5 4 3 2 1

B (1:2) D (1:2)
H 2 2 H
1
A-A 1
MOUNTING DETAILS KING/ MAIN BOOM 2
& MAIN BOOM/ KNUCKLE BOOM 2

(TYP.)
note
A note 4.1
note
9 5.3
5.2
note
G 5.5 G
4

7 6 5 8
19
note
INSIDE 21 3
OUTSIDE 5.2
3
note note note
5.5 6 7
5.5 5.7 NOTES
1. DETAIL OF CYLINDER / BOOM BOLTS AND END PLATES,
note
REF. DWG. S3120U-S9019.
F 5.4 F
2. MACHINING DETAILS FOR BOSS IN SUPPORT STRUCTURE,
note REF. DWG. S3120U-S9006, SHEET 2/3.
5.8 note B note 3. BOLT POS. 6, TO BE TORQUED TO 350 Nm.
A 5.6 5.6 BOLT POS. 5, TO BE TORQUED TO 350 Nm.
note
5.1
MOUNTING DESCRIPTION:
4.1 TACK GLUE THE V-RING TO THE STRUCTURE USING LOCTITE 480.
(USE A MINIMUM OF LOCTITE)
THE TACK-GLUING SHALL BE PERFORMED ON 2-4 POS. ONLY AND
E ALL THE POSITIONS SHALL BE ACCESSIBLE AFTER FINAL INSTALLATION. E
5.1 SHRINK THE OD OF THE BUSHING (POS.2) IN LIQUID NITROGEN
FOR APPROX. 10-20 MIN. AND INSTALL THE BUSHING.
5.2 FILL UP THE VOID BETWEEN THE CYLINDER / BOOM BOLT
AND THE AREA INSIDE THE PERIMETER OF THE V-RINGS
WITH STANDARD EP2 GREASE.
5.3 APPLY STANDARD EP2 GREASE ON THE ENTIRE SURFACE
OF THE CYLINDER / BOOM BOLT AND INSTALL BOLT.
C-C 5.4 FILL THE LOOSE ENDPLATE WITH EP2 GREASE AND INSTALL.
MOUNTING DETAILS 5.5 LUBRICATE WITH EP2 GREASE AND INSTALL SECURING BOLT
D D
STANDARD MAIN & KNUCKLE CYLINDERS (POS. 6), NORLOCK WASHER (POS. 7) AND BOLT w/LUB. NIPPLE
(TYP.) (POS. 5) INCLUDING WASHER (POS. 8).
note
4.1
5.6 SEAL OF ENDPLATES WITH MARINE SEALING.
note 5.7 FILL UP REMAINING VOIDS WITH EP2 GREASE TROUGH THE
5.3
LUB. NIPPLE.
C
note 6 7
5.8 APPLY STANDARD EP2 GREASE ON THE CAP
5.8 AND INSTALL THE CAPS.

note 6. REPAIR OR REPLACEMENT OF V-RING

7 6 5.5
C 5 8 IF THE V-RING NEEDS TO BE REPLACED WITH THE BOOM OR C
CYLINDER IN POSITION, THE V-RING CAN BE CUT AND JOINED
INSIDE OUTSIDE BY GLUING.
note GLUING PROCEDURE:
5.5 note note
5.5 5.7
APPLY LOCTITE POLYOLEFIN PRIMER TYPE 770 ON THE CUTTED FACES
4
FOR APPROX. 1 HOUR PRECONDITIONING.
THEN GLUE THE CUTTED FACES TOGETHER USING LOCTITE 406.
note
5.4 Tolerances except as noted Welding except as noted Total weight

C 9 ISO 13920-AE EN 287-1/2

note ISO 2768-mK-E EN 288-1/2/3/4 184 kg
B
note D 5.6
B
4 23.03.2009 Reissued for Construction JAN JAN ODH
5.6
note 3 04.09.2008 Reissued for Construction JAN KISP ODH
2 18.06.2008 Reissued for Construction JEF JAN ODH
5.1 1 18.01.2006 Reissued for Construction YVW YVW THL
Rev. Date Description Made Checked Appr.
2 9 DBI-DUT N410037 CAP, RED PELD 0,01 kg 173659 This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
1 8 M24, DIN125A 140HV, HDG 0,0 kg 26560 only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
NOTE 3 7 M24, NORLOCK STAINLESS A4 0,018 kg 41506
this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Norway AS
Servicebox 401, Korsvikfjorden
to National Oilwell Norway AS upon request and in any event upon
N-4604 Kristiansand, Norway
3 6 M24x080MM, DIN933 8.8, HDG 0,4 kg 30491 completion of the use for which it was loaned.

Bolt assembly suitable for ( -due to bolt material ) Title:

1 5 M24x050MM, DIN933, W/LUBE NIPPLE 8.8, HDG 0,3 kg 16501 Assembly Drawing
DnV Lifting Appliance - down to Td= -20C°
ABS Lifting Appliance- down to Td= -10C° 1 4 BOLT Ø250x415, AISI 316L CLADDING S355J2+N 178,1 kg 169118 Boom & Cylinder Bolt
2 3 V-350-A FPM VITON Rubber, FPM VITON 0,4 kg 167463 Ø250x390
A 1 2 BUSHING Ø275/Ø250x200 Orkot TXMM 2,6 kg 96448 Scale: Projection: Size: Main Part: A
1:5 A1
2 1 BEARING Ø310/Ø251x15 Polypenco Nylatron GSM 0,4 kg 93102 Drawing Number: Sheet: Revision:

Qty. Pos Description/Dimension Drawing/Material Unit wt. Part No. S3120U-S9006 1 /3 4

12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H H

MACHINING DETAILS MACHINING DETAILS

KING, KNUCKLE BOOM REAR END MAIN BOOM, BOTH FRONT & REAR END
& CYLINDER BRACKETS (TYP.)
(TYP.)
230 (BEFORE MACH.)

225 (BEFORE MACH.)

80 (BEFORE MACH.) 80 (BEFORE MACH.)
G PROJECT SPECIFIED WELD G

2 x M24 - 60 DEEP
EQUALLY SPACED

12,5
6,3
10,5 200 +- 0,5
0 10,5 0,5
78 234 +- 0 78

0,5

PCD n320
n275 H7

n252 F8

n248 F8
0
n460

n350

n310

n360
F n310 +- F
b 0,5 6,3
6,3 6,3
b 0,5

3
TYP. (SEAL WELD BEFORE MACH.)
2 2

76 238 `1 76
12,5 = = 12,5
390
E E
110,5 110,5

221 ` 0,5

D D
PAINTING GUIDE
KING, KNUCKLE BOOM REAR END MACHINING ORDER
& CYLINDER BRACKETS MAIN BOOM, BOTH FRONT & REAR END
( TYP. NOT IN SCALE ) (TYP.)
(NOT IN SCALE!)
AREA OUTSIDE DIAMETER Ø310mm
TO BE PAINTED TO FULL SPECIFICATION

C C

CUT 1;
TO BE MACHINED 360 ~
BEFORE WELDING
Tolerances except as noted Welding except as noted Total weight
ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN 288-1/2/3/4 184 kg
B B
CUT 2;
4 23.03.2009 Reissued for Construction JAN JAN ODH
TO BE MACHINED 360 ~ 3 04.09.2008 Reissued for Construction JAN KISP ODH
AFTER WELDING 2 18.06.2008 Reissued for Construction JEF JAN ODH
1 18.01.2006 Reissued for Construction YVW YVW THL
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
AREA INSIDE DIAMETER Ø310mm TO BE this information to others is not permitted without the express written
National Oilwell Norway AS
consent of National Oilwell Norway AS. This document is to be returned
PROTECTED USING TECTYLE to National Oilwell Norway AS upon request and in any event upon
completion of the use for which it was loaned.
Servicebox 401, Korsvikfjorden
N-4604 Kristiansand, Norway
Title:
AREA OUTSIDE DIAMETER Ø360mm TO BE
PAINTED TO FULL SPECIFICATION Assembly Drawing
Boom & Cylinder Bolt
Ø250x390
A AREA INSIDE DIAMETER Ø360mm TO BE Scale: Projection: Size: Main Part: A
PROTECTED USING TECTYLE 1:5 A1
Drawing Number: Sheet: Revision:

S3120U-S9006 2 /3 4
12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H MOUNTING ILLUSTRATION OF MAIN CYLINDERS H

(NOT IN SCALE!)

MACHINING DETAILS
CYLINDER ONLY
G
(TYP.) G
4
KING STRUCTURE 394 ± 0,5

2 x M24 -60 DEEP

EQUALLY SPACED 234 `0,5

Max. 210
NOTE 1!
F F

PCD Ø320

n252 F8

n248 F8
Ø400

Ø400
6,3 6,3

Min. 255
b 0,5

12,5
12,5
PRESSURE EQUALISATION

NOTE 1!
E E

MOUNTING ILLUSTRATION OF KNUCKLE CYLINDERS

(NOT IN SCALE!)

D D

MAIN BOOM STRUCTURE MACHINING GUIDE FOR HOLES IN CYLINDER FORK!

1. LOCATION OF MAIN HYDRAULIC CONNECTION FOR MAIN BOOM CYLINDERS

TO BE ON THE SAME SIDE AS HOLE Ø252mm

2. LOCATION OF HYDRAULIC CONNECTION FOR KNUCKLE BOOM CYLINDER

C C
TO BE ON THE SAME SIDE AS HOLE Ø248mm

Tolerances except as noted Welding except as noted Total weight

ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN 288-1/2/3/4 184 kg
B B
NOTE 2! 4 23.03.2009 Reissued for Construction JAN JAN ODH
3 04.09.2008 Reissued for Construction JAN KISP ODH
2 18.06.2008 Reissued for Construction JEF JAN ODH
1 18.01.2006 Reissued for Construction YVW YVW THL
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Norway AS
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
completion of the use for which it was loaned. N-4604 Kristiansand, Norway
Title:

Assembly Drawing
Boom & Cylinder Bolt
Ø250x390
A Scale: Projection: Size: Main Part: A
1:5 A1
Drawing Number: Sheet: Revision:

S3120U-S9006 3 /3 4
12 11 10 9 8 7 6 5 4 3 2 1
National Oilwell Norway AS
PARTS LIST
Customer Partslist
Draw number: S3120U-S9007 Drawing Name Drawing Revision 4
Item No.: XS3120US9007 Boom & Cylinder Bolt Updated 23.03.2009
Item Group: DRAW Ø280x415
DRAWING ASSEMBLY DRAWING

Pos Qty Item name Item no. Drawing Reference

1 2,00 THRUST BEARING 92097

2 1,00 ORKOT BUSHING, ORKOT TXMM 150628

3 2,00 V-RING 400 167464

4 1,00 BOOM AND CYLINDER BOLT 169119

5 1,00 BOLT, HEX, M30X080, W/LUBE NIPPLE, M30 19801

6 3,00 BOLT, HEX, M30 X 100MM 27107

7 3,00 WASHER, M30 61221

8 1,00 WASHER, M30, VG 26563

9 2,00 CAP, RED PLASTIC 173660

PDFPartslist.exe (1.18.3365.15927) 07.04.2009 13:48:53 Page: 1 of 1

 12 11 10 9 8 7 6 5 4 3 2 1

B (1:2) D (1:2)
2
H 2 2 H
1
A-A 1
MOUNTING DETAILS KING/ MAIN BOOM 2
& MAIN BOOM/ KNUCKLE BOOM
(TYP.)
note note
A 5.3 4.1
9
note
5.5 note note
G G
note 5.2 5.2
5.4

7 6 5 8
3 19
3 21
INSIDE OUTSIDE

note note note NOTES

5.5 5.5 5.7
1. DETAIL OF CYLINDER / BOOM BOLTS AND END PLATES,
4 REF. DWG. S3120U-S9020.
F F
2. MACHINING DETAILS FOR BOSS IN SUPPORT STRUCTURE,
6 7 REF. DWG. S3120U-S9007, SHEET 2/3.
note
3. BOLT POS. 6, TO BE TORQUED TO 700 Nm.
5.8 note
B BOLT POS. 5, TO BE TORQUED TO 700 Nm.
5.6 note
A 5.6
MOUNTING DESCRIPTION:
note 4.1 TACK GLUE THE V-RING TO THE STRUCTURE USING LOCTITE 480.
5.1 (USE A MINIMUM OF LOCTITE)
THE TACK-GLUING SHALL BE PERFORMED ON 2-4 POS. ONLY AND
E ALL THE POSITIONS SHALL BE ACCESSIBLE AFTER FINAL INSTALLATION. E
5.1 SHRINK THE OD OF THE BUSHING (POS.2) IN LIQUID NITROGEN
FOR APPROX. 10-20 MIN. AND INSTALL THE BUSHING.
5.2 FILL UP THE VOID BETWEEN THE CYLINDER / BOOM BOLT
AND THE AREA INSIDE THE PERIMETER OF THE V-RINGS
WITH STANDARD EP2 GREASE.
5.3 APPLY STANDARD EP2 GREASE ON THE ENTIRE SURFACE
OF THE CYLINDER / BOOM BOLT AND INSTALL BOLT.
C-C 5.4 FILL THE LOOSE ENDPLATE WITH EP2 GREASE AND INSTALL.
MOUNTING DETAILS 5.5 LUBRICATE WITH EP2 GREASE AND INSTALL SECURING BOLT
D STANDARD MAIN & KNUCKLE CYLINDERS D
(POS. 6), NORLOCK WASHER (POS. 7) AND BOLT w/LUB. NIPPLE
(TYP.) (POS. 5) INCLUDING WASHER (POS. 8).
note 5.6 SEAL OF ENDPLATES WITH MARINE SEALING.
4.1 5.7 FILL UP REMAINING VOIDS WITH EP2 GREASE TROUGH THE
note
5.3 LUB. NIPPLE.
C note 5.8 APPLY STANDARD EP2 GREASE ON THE CAP
5.5 AND INSTALL THE CAPS.
note
5.8
6. REPAIR OR REPLACEMENT OF V-RING
6 7
C IF THE V-RING NEEDS TO BE REPLACED WITH THE BOOM OR C

7 6 CYLINDER IN POSITION, THE V-RING CAN BE CUT AND JOINED

5 8 BY GLUING.
GLUING PROCEDURE:
INSIDE OUTSIDE
APPLY LOCTITE POLYOLEFIN PRIMER TYPE 770 ON THE CUTTED FACES
note FOR APPROX. 1 HOUR PRECONDITIONING.
note note
5.5 5.5 5.7
THEN GLUE THE CUTTED FACES TOGETHER USING LOCTITE 406.
4
Tolerances except as noted Welding except as noted Total weight
ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN 288-1/2/3/4 280 kg
B 9 note B
5.4 4 23.03.2009 Reissued for Construction JAN JAN ODH
note 3 04.09.2008 Reissued for Construction JAN KISP ODH
C
5.6 D note 2
1
18.06.2008
18.01.2006
Reissued for Construction
Reissued for Construction
JEF
YVW
JAN
YVW
ODH
THL
5.6 Rev. Date Description Made Checked Appr.
note 2 9 DBI-DUT N410044B CAP, RED PELD 0,01 kg 173660 This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes

5.1 1 8 M30, DIN125A 140HV, HDG 0,1 kg 26563 only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
National Oilwell Norway AS
3 7 M30, NORLOCK STAINLESS Stainless 0,050 kg 61221 consent of National Oilwell Norway AS. This document is to be returned
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
N-4604 Kristiansand, Norway
3 6 M30x100MM, DIN933 8.8, HDG 0,8 kg 27107 completion of the use for which it was loaned.

NOTE 1 5 M30x080MM, DIN933, W/LUBE NIPPLE 8.8, HDG 0,7 kg 19801

Title:

Assembly Drawing
Bolt assembly suitable for ( -due to bolt material )
1 4 BOLT Ø280x415, AISI 316L CLADDING S355J2+N 271,6 kg 169119 Boom & Cylinder Bolt
DnV Lifting Appliance - down to Td= -20C° 2 3 V-400-A FPM VITON Rubber, FPM VITON 0,4 kg 167464 Ø280x415
A 1 2 Ø280/305X225MM, GBYN000289TXMM Orkot TXMM 3,2 kg 150628 Scale: Projection: Size: Main Part: A
ABS Lifting Appliance- down to Td= -10C° 1:5 A1
2 1 BEARING Ø350/281x15 Polypenco Nylatron GSM 0,6 kg 92097 Drawing Number: Sheet: Revision:

Qty. Pos Description/Dimension Drawing/Material Unit wt. Part No. S3120U-S9007 1 /3 4

12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H H
MACHINING DETAILS
KING, KNUCKLE BOOM REAR END MACHINING DETAILS
& CYLINDER BRACKETS MAIN BOOM, BOTH FRONT & REAR END
(TYP.) (TYP.)

250 (BEFORE MACH.) 80 (BEFORE MACH.) 255 (BEFORE MACH.) 80 (BEFORE MACH.)

PROJECT SPECIFIED WELD

2 x M30 - 60 DEEP
EQUALLY SPACED
G G

12,5
6,3
225 +- 0,5
10,5 0 10,5 259 +- 0,5
78 0 78

n284 F8
0,5

PCD n380
n305 H7

n276 F8
0
n520

n400

n350

n400
n350 +-
6,3 b 0,5 6,3
F 6,3 F
b 0,5

3
TYP. (SEAL WELD BEFORE MACH.)
2 2
12,5 = = 12,5

76 263 `1 76
123 123 415

E 246 `0,5 E

D D
PAINTING GUIDE
KING, KNUCKLE BOOM REAR END MACHINING ORDER
& CYLINDER BRACKETS MAIN BOOM, BOTH FRONT & REAR END
( TYP. NOT IN SCALE ) (TYP.)
(NOT IN SCALE!)
AREA OUTSIDE DIAMETER Ø350mm
TO BE PAINTED TO FULL SPECIFICATION

C C

CUT 1;
TO BE MACHINED 360 ~
BEFORE WELDING

Tolerances except as noted Welding except as noted Total weight

ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN 288-1/2/3/4 280 kg
B CUT 2; B
TO BE MACHINED 360 ~ 4 23.03.2009 Reissued for Construction JAN JAN ODH
3 04.09.2008 Reissued for Construction JAN KISP ODH
AFTER WELDING 2 18.06.2008 Reissued for Construction JEF JAN ODH
1 18.01.2006 Reissued for Construction YVW YVW THL
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
AREA INSIDE DIAMETER Ø350mm TO BE this information to others is not permitted without the express written
National Oilwell Norway AS
consent of National Oilwell Norway AS. This document is to be returned
PROTECTED USING TECTYLE AREA OUTSIDE DIAMETER Ø400mm TO BE to National Oilwell Norway AS upon request and in any event upon
completion of the use for which it was loaned.
Servicebox 401, Korsvikfjorden
N-4604 Kristiansand, Norway
PAINTED TO FULL SPECIFICATION Title:

Assembly Drawing
Boom & Cylinder Bolt
AREA INSIDE DIAMETER Ø400mm TO BE Ø280x415
A Scale: Projection: Size: Main Part: A
PROTECTED USING TECTYLE 1:5 A1
Drawing Number: Sheet: Revision:

S3120U-S9007 2 /3 4
12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H MOUNTING ILLUSTRATION OF MAIN CYLINDERS H

(NOT IN SCALE!)

MACHINING DETAILS
CYLINDER ONLY
(TYP.)

G 4 419 ± 0,5 G
KING STRUCTURE
2 x M30 -60 DEEP
259 `0,5
EQUALLY SPACED

Max. 250
NOTE 1!
F F

PCD Ø380

n284 F8

n276 F8
Ø455

Ø455
6,3 6,3

Min. 305
12,5

12,5
PRESSURE EQUALISATION
b 0,5
NOTE 1!
E E

MOUNTING ILLUSTRATION OF KNUCKLE CYLINDERS

(NOT IN SCALE!)

D D

MAIN BOOM STRUCTURE MACHINING GUIDE FOR HOLES IN CYLINDER FORK:

1. LOCATION OF MAIN HYDRAULIC CONNECTION FOR MAIN BOOM CYLINDERS

TO BE ON THE SAME SIDE AS HOLE Ø284mm

2. LOCATION OF HYDRAULIC CONNECTION FOR KNUCKLE BOOM CYLINDERS

C C
TO BE ON THE SAME SIDE AS HOLE Ø276mm

Tolerances except as noted Welding except as noted Total weight

ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN 288-1/2/3/4 280 kg
B B
NOTE 2! 4 23.03.2009 Reissued for Construction JAN JAN ODH
3 04.09.2008 Reissued for Construction JAN KISP ODH
2 18.06.2008 Reissued for Construction JEF JAN ODH
1 18.01.2006 Reissued for Construction YVW YVW THL
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Norway AS
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
completion of the use for which it was loaned. N-4604 Kristiansand, Norway
Title:

Assembly Drawing
Boom & Cylinder Bolt
Ø280x415
A Scale: Projection: Size: Main Part: A
1:5 A1
Drawing Number: Sheet: Revision:

S3120U-S9007 3 /3 4
12 11 10 9 8 7 6 5 4 3 2 1
National Oilwell Varco
Customer Parts List
Part No: XD150013A4001 Drawing No.: D1500-13-A4001
Alternate ID: Revision: 0
Part Name: Knuckle Boom Updated 22.03.2017
Part Description: W/ Reinforcement Brackets "Ensco" Type Other Doc No:

Line No Qty / UOM Part No / Alternate ID Drawing Reference

Lvl
Position Unit Wgt Part Name Remarks
1 1 PCS XOC3932KM01S4003 / 11078007-001 OC3932KM01-S4003
1
40824,07 KNUCKLE BOOM;BRACKETS & WELDING
01
KG SOCKETS;
2 2 PCS XS3460US9001 / 11068879-001 S3460U-S9001
1
KNUCKLE BOOM;SUSPENSION BRACKET, C-
02 163,00 KG
C=900;
3 1 PCS XOC3932KM01D4002 / 11106271-001 OC3932KM01-D4002
1
03 4,20 KG Dead End Bolt;Knuckle Boom;

4 3 PCS XOC3932KM01D4003 / 11084643-001 OC3932KM01-D4003

1 Lock Plate - Loadcell Bolt KOSD-;Lock Plate -
04 0,00 KG Loadcell Bolt KOSD-9506, Knuckle Boom;UCKLE
BOOM
5 1 PCS XOC3932KM01D4004 / 11080594-001 OC3932KM01-D4004
1
05 0,00 KG Spacer For Loadcell KOSD-9506;Knuckle Boom;

6 1 PCS XOC3932KM01D4011 / 11086990-001 OC3932KM01-D4011

1
06 0,95 KG SWL Sign;Knuckle Boom;

7 2 PCS XOC3932KM01D4012 OC3932KM01-D4012

1
07 0,10 KG Distance Pipe;Knuckle Boom;

8 2 PCS XS4210UA9001 / 10194875-001 S4210U-A9001

1
08 6,43 KG Light, Proprietary;Floodlight; Cranes;

9 1 PCS XS4210US9002 / 10194881-001 S4210U-S9002

1
09 0,15 KG AVIATION LIGHT;FIXED TO HANDRAILS;

10 2 PCS XS3612US9010 / 11108385-001 S3612U-S9010

1 Bolt for Wiresheave (ø34mm steel
10 27,22 KG rope);Wiresheave item no. 94326;WIRESHEAVE
ITEM NO. 94326
11 6 PCS 94326 / 10294707-001
1
11 95,00 KG WIRE SHEAVE FOR Ø34 MM WIRE

12 1 PCS XOC3932KM01S4004 / 11104607-001 OC3932KM01-S4004

1
12 53,00 KG KNUCKLE BOOM;WIRE SHEAVE BOLT;

13 1 PCS 35377 / 10381235-001

1
13 0,00 KG SPLIT PIN Ø 08MM Ø08X080MM, DIN

14 2 PCS 12588 / 10447448-001

1
14 0,01 KG NIPPLE,GREASE,1/4"BSP,AISI 316

www.nov.com Nov.Service.exe (4.1.0.25394) (RIGOFFICE) 23.03.2017 13:49:27 Page: 1 of 2

National Oilwell Varco
Customer Parts List
Part No: XD150013A4001 Drawing No.: D1500-13-A4001
Alternate ID: Revision: 0
Part Name: Knuckle Boom Updated 22.03.2017
Part Description: W/ Reinforcement Brackets "Ensco" Type Other Doc No:

Line No Qty / UOM Part No / Alternate ID Drawing Reference

Lvl
Position Unit Wgt Part Name Remarks
15 4 PCS 160694 / 11102890-001
1
15 0,29 KG FLANGED BUSHING ACM

18 1 PCS 25175 / 16634610-001

1
18 0,19 KG BOLT, HEX, M20 X 060MM

19 2 PCS 25173
1
19 0,19 KG BOLT, HEX, M20 X 050MM

20 3 PCS 26558
1
20 0,02 KG WASHER, M20, tZn

21 2 PCS 24679 / 16634221-001

1
21 0,31 KG BOLT, HEX, M16 X 150MM

22 4 PCS 26556
1
22 0,01 KG WASHER, M16, tZn

23 2 PCS 26644 / 16584155-001

1
23 0,00 KG NUT, M16 M16, ISO 4032, GRADE 8,

24 6 PCS 25141
1
24 0,04 KG BOLT, HEX, M12 X 020MM

25 6 PCS 26554
1
25 0,01 KG WASHER, M12, tZn

26 1 PCS XOC3932KM01M4001 OC3932KM01-M4001

1
26 0,00 KG KNUCKLE BOOM;CABLE GATES;

27 1 PCS XOC3932KM01M3002 OC3932KM01-M3002

1
27 1,00 KG REMOTE LUBRICATION OF;CYLINDER BOLTS;

28 1 PCS 16609468-001 / 16609468-001 16609468-DAD

1
28 154,00 KG Reinforcement Bracket;For Knuckle Boom;

Total weight 42003,56 KG

www.nov.com Nov.Service.exe (4.1.0.25394) (RIGOFFICE) 23.03.2017 13:49:27 Page: 2 of 2

 12 11 10 9 8 7 6 5 4 3 2 1

A 9
1
H H M 8 H

1238,5
27

H M

1218
26
G G
4893

4003

78
F 20212

F F

A
F 21891

886,5
1815
J J

1884
E E

C C

8 B B

9
D D

13 1

SECTION M-M ( 1 : 20 )
4

C C

NOTES:
1. ADDED REINFORCEMENT BRACKETS ACCORDING
TO PIB 79017406.

2. FOR MOUNTING OF REINFORCENMENT BRACKETS

16609468.DAD SEE 16609503.INF

Tolerances except as noted Welding except as noted Total weight

ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN ISO 15614-1/2 21892 kg
B B
TIGHTENING OF BOLTS
ALL BOLTS SLIGHTLY OILED
Excerpt from HL/TP-15
2 Torque [Nm]
Size Grade 8.8, Grade 10.9, A4-80
HDG Phosphated 0 22-Mar-2017 Issued for Construction Juel, Henrik
M8 26 28 22 Rev. Date Description Responsible
M10 50 56 44 This document contains proprietary and confidential information which
belongs to National Oilwell Varco Norway AS. It is loaned for limited
M12 87 98 76 purposes only and remains the property of National Oilwell Varco Norway
1 M14 137 156 121 AS. Reproduction, in whole or in part, or use of this design or distribution
of this information to others is not permitted without the express written
M16 211 238 187 consent of National Oilwell Varco Norway AS. This document is to be
National Oilwell Varco Norway AS
returned to National Oilwell Varco Norway AS upon request and in any Servicebox 401, Lundsiden
M18 294 332 260 event upon completion of the use for which it was loaned. N-4604 Kristiansand, Norway
M20 412 465 364 Title:
M22 554 626 490
M24 712 804 629 Assembly Drawing
M27
M30
1028
1402
1161
1582
909
1240
Knuckle Boom
SECTION B-B ( 1 : 10 ) M33 1894 2133 1670 W/Reinforcement Brackets "Ensco" Type
A M36 2440 2761 2160 Scale: Projection: Size: Main Part: A
M39 3135 3543 2770 1:30 A1
SECTION A-A ( 1 : 20 ) Drawing Number: Sheet: Revision:

D1500-13-A4001 1/2 0
12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H 22 21 7 23 H

12 105 15 105 15 105 12

105
9
E
3 13

11
11
11
G 11
1

G 19 G
10
20
G 10
D 10 10
10
77
14
157
E 10
12 SECTION G-G ( 1 : 5 )

F DETAILS RE. WIRESHEAVE BOLT DETAILS RE. WIRESHEAVE BOLT F

CAN BE FOUND ON DRAWING CAN BE FOUND ON DRAWING
S3612U-S9010 S3612U-S9010

99
D
SECTION C-C ( 1 : 10 ) SECTION D-D ( 1 : 5 ) SECTION E-E ( 1 : 5 )
E E
SECTION F-F ( 1 : 5 )

22 23 21 7

99

D D
K

11 15 135

4
4

25 24
5
K 25 24

C 16 C
17

195

SECTION K-K ( 1 : 5 )
B B
SECTION J-J ( 1 : 10 )
0 22-Mar-2017 Issued for Construction
Rev. Date Description Made Checked Appr.
This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
only and remains the property of National Oilwell Norway AS.
Reproduction, in whole or in part, or use of this design or distribution of
this information to others is not permitted without the express written
consent of National Oilwell Norway AS. This document is to be returned
National Oilwell Varco Norway AS
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Lundsiden

SECTION H-H ( 1 : 5 ) completion of the use for which it was loaned.

Title:
N-4604 Kristiansand, Norway

Assembly Drawing
Knuckle Boom
W/Reinforcement Brackets "Ensco" Type
A Scale: Projection: Size: Main Part: A
1:30 A1
Drawing Number: Sheet: Revision:

D1500-13-A4001 2/2 0
12 11 10 9 8 7 6 5 4 3 2 1
National Oilwell Varco
Customer Parts List
Part No: 16609503-001 Drawing No.: 16609503-INF
Alternate ID: 16609503-001 Revision: 01
Part Name: Cylinder Bracket Repair Updated 29.09.2016
Part Description: For Knuckle Boom Other Doc No:

Line No Qty / UOM Part No / Alternate ID Drawing Reference

Lvl
Position Unit Wgt Part Name Remarks
2 1 PCS 16609468-001 / 16609468-001 16609468-DAD
1
02/03 154,00 KG Reinforcement Bracket

Total weight 154,00 KG

www.nov.com Nov.Service.exe (3.6.0.28312) (RIGOFFICE) 29.09.2016 08:50:14 Page: 1 of 1

 12 11 10 9 8 7 6 5 4 3 2 1

H H

DETAIL A ( 1 : 10 )
WELD PREPARATION

G G

) A TE
0 5 PL
(5 OM TH
T I
NOTE 1 B OT H W ATE ATE KET
F T US PL OD AC F
CU FL IDE MM BR
S CO ENT
SECTION C-C ( 1 : 5 ) AC CM
O
T FOR
IN
RE
B

25
A
E NOTE: E
a10
B
1. MATERIAL (INCLUDING POS 2 AND 3) IS NVE 36
3 2. MATERIAL IS NVD 36

(25)
7 GENERAL NOTE
All dimensions are given without deductions
for beveling weld gap or allowance for
NOTE 2 machining unless otherwise noted (u.o.n).
All sharp edges shall be rounded by grinding
to a radius of minimum 2 mm. Remove all
D burrs, weldslag and spatters. D

WELD
SECTION B-B ( 1 : 10 ) All welds to be 10 or 10 cont. u.o.n.
10
NDT
Ref. to NOV order and spec. HLA-4A for test
method and min. NDT extent from agreed
(20) classification society for this project.

Essential
All welds are _________________ u.o.n.

Essential: E
C 10 E C
Primary: P
2 Secondary: S
3
305

305
1 3 PL 50 x 710 x 812. NVE 36 76,8 kg
a10 1 2 PL 50 x 710 x 812. NVE 36 76,8 kg
50
x40 50 1 1 Knuckle Boom

20
Qty. Pos. Description/Dimension Drawing/Material Unit wt.
C C
20

Tolerances except as noted Welding except as noted Total weight

ISO 13920-AE EN 287-1/2
ISO 2768-mK-E EN ISO 15614-1/2 154 kg
710

710
B B

30
01 29-Sep-2016 For Information Stana, Erik
Rev. Date Description Responsible
This document contains proprietary and confidential information which
belongs to National Oilwell Varco Norway AS. It is loaned for limited
30 purposes only and remains the property of National Oilwell Varco Norway
AS. Reproduction, in whole or in part, or use of this design or distribution
of this information to others is not permitted without the express written
consent of National Oilwell Varco Norway AS. This document is to be
National Oilwell Varco Norway AS
returned to National Oilwell Varco Norway AS upon request and in any Servicebox 401, Lundsiden
event upon completion of the use for which it was loaned. N-4604 Kristiansand, Norway
Title:

Information Drawing
Cylinder Bracket Repair
For Knuckle Boom
A Scale: Projection: Size: Main Part: A
812 812 1:20 A1
Drawing Number: Sheet: Revision:

16609503-INF 1 /2 01
12 11 10 9 8 7 6 5 4 3 2 1
 12 11 10 9 8 7 6 5 4 3 2 1

H H
DETAIL A ( 1 : 5 )
WELD DETAIL
SECTION D-D ( 1 : 1 )
22 x405
GROUND
40
2
No grinding required to obtain dimension as long it's less than maximum.
9
35

10 MAX

8 MAX
G

8
G

30
3

F
D Measuring point for welds(Section D-D and E-E) F
is the bottom plate
SECTION E-E ( 1 : 1 )
x304
a10 GROUND
E 57
D
(4 Sec
05
2
) W tion
eld D-D
len
50
gth

E E

30
F

R400
H

17,5
Fill with weld
Grind to smooth curv
(3 Sec 20
04 tio
)W n
H 45
35 Sec

GROUND
eld E-E
0 W tio

F
len
eld n F-

g th
len F

SECTION F-F ( 1 : 1 )
g th

D 2 D
G
74 x350
GROUND

49
DETIAL G ( 1 : 1 ) R250 54 MA
X

30
C C
3

a10 WELD BETWEEN BOTTOM

PLATE AND SECTION H-H ( 1 : 2 )
Fillet weld 10 120 REINFORCEMENT BRACKET BOTTOM PLATE
where possible 10 120
WELD IN SECTION F-F
a10 2
B B

01 29-Sep-2016 For Information Stana, Erik

Rev. Date Description Responsible
20

30
This document contains proprietary and confidential information which
belongs to National Oilwell Varco Norway AS. It is loaned for limited
purposes only and remains the property of National Oilwell Varco Norway
AS. Reproduction, in whole or in part, or use of this design or distribution
of this information to others is not permitted without the express written
consent of National Oilwell Varco Norway AS. This document is to be
National Oilwell Varco Norway AS
returned to National Oilwell Varco Norway AS upon request and in any Servicebox 401, Lundsiden
2 event upon completion of the use for which it was loaned. N-4604 Kristiansand, Norway
Title:
R100 Information Drawing
Fill with weld Cylinder Bracket Repair
For Knuckle Boom
A Scale: Projection: Size: Main Part: A
1:20 A1
Drawing Number: Sheet: Revision:

16609503-INF 2 /2 01
12 11 10 9 8 7 6 5 4 3 2 1
 Document number V3054-Z-MA-001 TOC section 10.4
TABLE OF CONTENTS Revision: 1
Page: 1

Vol. Section Title Add. code Rev. Document number

Other document number

2 10.4 Installation Drawing

Installation Drawing, WIRE REEVING FOR Ø34MM WIRE 2 OC3932KM02-M0001
SWL 17 - 34 - 85 TONNES
3932 SERIES
Installation Drawing, KING / PEDESTAL 0 OC3932KM02-M2001
Slew Ring Bearing & Slewgear
Installation Drawing, REMOTE LUBRICATION FOR 0 OC3932KM02-M2002
CYLINDER BOLTS ON CRANE KING
Installation Drawing, REMOTE LUBRICATION OF 0 OC3932KM02-M2004
SLEW BEARING
Installation Drawing, REMOTE LUBRICATION OF 0 OC3932KM02-M3002
CYLINDER BOLTS

R5325 ENSCO DS-4 (Former Deep Ocean Clarion)

V3054 OC3932KCE-(17-85)-(42-18)(27) No 1

www.nov.com
National Oilwell Norway AS
Customer Parts List
Drawing No.: OC3932KM02-M0001 Drawing Name: Drawing Revision: 2
Item No.: XOC3932KM02M0001 WIRE REEVING FOR Ø34MM WIRE Updated: 08.04.2010
Item Group: DRAW SWL 17 - 34 - 85 TONNES
DRAWING 3932 SERIES

Qty Item No. Drawing Reference

Pos
Unit Wgt. Item Name Tag No.
350 29774
1
5,74 WIRE Ø34mm GALV.

1 40571
2
5,00 THIMBLE 32-34mm, BORE

1 189166
3
500,00 SWIVEL HOOK, SWL 17T

1 189167
4
1000,00 HOOK BLOCK, SWL 34T

1 189168
5
2000,00 HOOK BLOCK, SWL 85T

1 172284
6
15,00 WEAK LINK, 10T

Total weight 5529,00

www.nov.com PDFPartslist.exe (1.21.3635.18246) (XAL) 09.04.2010 10:32:11 Page: 1 of 1

National Oilwell Norway AS
PARTS LIST
Draw number . . . : OC3932KM02-M2001 Document Name Drawing revision . . . . . . : 0 20/12-07
Item No. . . . . . . . . . : XOC3932KM02M2001 KING / PEDESTAL
Slew Ring Bearing & Slewgear
INSTALLATION DRAWING
Item group . . . . . . : DRAW DRAWING

Pos Drawing Referance Quantity Item name /Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

01 1,00 SLEWING RING, 3932 154792 No 5.014,00

192.36.3932.001.61.1521 SLEWING RING
SEE NOTE / DOCUMENT

02 4,00 SLEW GEARBOX, RE3513/08 166363 No 415,00

DBS1-122:1-F608-M18/Z13/B190-C+0.5-SAD
SEE NOTE

03 190,00 STUD BOLT, M42x385MM 129943 No 3,62

M42X385MM DIN976 10,9 BLACK THREADS 25
SEE NOTE

04 190,00 NUT ROUND, M42, BLACK, 141531 No 0,70

M42/65/45/35 GRADE 10
(SEE NOTE(BRUKES I KR.SAND)

05 190,00 WASHER, HARDENED, M42 141539 No 0,70

M42, Ø88xØ43x20 ,HARDENED 30-35HRC

06 94,00 CAP, TREADPROTECTOR, M42,H1=47MM 47895 No 0,07

M42 SAP-SEAL,h1=47mm WITHOUT GREASE
NY VERSJON!

07 96,00 BOLT, INNER HEX, M20 X 080MM 13194 Yes 0,26

M20X080MM,DIN912, 12,9 BLACK

08 OC3932KM02-H0003 4,00 HYDRAULIC MOTOR part:24267 REF No 0,00

09 16,00 BOLT, INNER HEX, M18 X 060MM 12975 Yes 0,17

M18X060MM,DIN912, 12,9 BLACK

10 96,00 CAP, RED PLASTIC 14370 No 0,02

DBI-DUT ND 50
250 STK. PR. PK

Total weight = 7663,79

HL100: Date 14/10-08 13:18 Page 1

 12 11 10 9 8 7 6 5 4 3 2 1

R = 1692 0,5
H H

G G
9
4082

A R 1692 0,5

4195
A

1085

KING
F F
GENERAL NOTES:
2 NOTE 1:

1120
ON THE OUTER RING THERE IS A POINT MARKED "S"
THIS POINT IS TO BE MOUNTED AWAY FROM THE
MAIN LOAD ZONE, APPROX 90 TO BOOM DIRECTION

NOTE 2:
PRE- STRESS BOLTS USING SPECIAL HYDRAULIC
TENSIONNING TOOL TENTEC HTT.5301.000 B
6 PULL FORCE= 920.5 kN , PUMP PRESSURE= 2275 Bar(g)
E BASED ON 90% OF YIELD STRESS, 10.9 QUALITY E

10 NOTE 3:
3

MIN. 93
TIGHTEN THE FIRST BOLT (1) THEN THE ONE
7
4626 Ø445 DIAMETRICALLY OPPOSITE, THEN THOSE AT 90 
ETC. AS INDICATED IN ILLUSTRATION BELOW.
4 SLEW GEAR DATA:
1
5 TYPE RE3513/08
8 2
SPECIFICATION DBS122:1-F608
MODULUS (m) 18
D D
7 3 TEETH (z) 13
CORR. (c) 1.5 mm
KING BOTTOM FLANGE
248

1 PINION HEIGHT (b) 190 mm

6 4
GIRBOX RATIO 122 : 1
5
MOTOR FLANGE AA2FM 90 / 61W
NOTE 4: NON PART NO. 166363
BACKLASH BETWEEN GEARPINION AND SLEWRING TO
PEDESTAL FLANGE BE MEASURED AND ADJUSTED AT THE THREE GREEN
TEETH ON THE SLEW RING. SLEW RING DATA:
SLEWGEARBOX IS 2,5mm ECCENTRIC, CORRECT
C 5 C
KING BACKLASH WILL BE ARCHIVED BY TURNING SLEWGEAR
BOTTOM FLANGE TYPE 192.36.3932.001.61.1521
4 MODULUS (M) 18
SLEW GEAR PINION
SLEWRING TEETH (Z) 201
3
CORR. (C) -9 mm
SECTION A-A ( 1 : 5 ) GEAR HEIGHT (B) 248 mm
0.48
PEDESTAL NON PART NO. 154792

Tolerances except as noted Welding except as noted Total weight

B ISO 13920-AE EN 287-1/2 B
ISO 2768-mK-E EN 288-1/2/3/4 7926 kg
BACKLASH 0.48 mm

96 10 CAP DBI-DUT ND 50 PVC 14370 0,0 kg 0Rev. 20.12.2007

Date
Issued for Construction
Description
KISP ZGT FRO
Made Checked Appr.
16 9 M18x060MM, DIN912 12.9, BLACK 12975 0,2 kg This document contains proprietary and confidential information which
belongs to National Oilwell Norway AS. It is loaned for limited purposes
4 8 MOTOR AA2FM 125/61W-VSD520 REF. 32,0 kg Reproduction, in whole or in part, or use of this design or distribution of
only and remains the property of National Oilwell Norway AS.

this information to others is not permitted without the express written

National Oilwell Norway AS
96 7 M20x080MM, DIN912 12.9, BLACK 13194 0,3 kg consent of National Oilwell Norway AS. This document is to be returned
to National Oilwell Norway AS upon request and in any event upon Servicebox 401, Korsvikfjorden
N-4604 Kristiansand, Norway
94 6 CAP TREADPROTECTOR M42 PEL 47895 0,1 kg completion
Title:
of the use for which it was loaned.

190 5 WASHER M42/88/43/20 30-35 HRc 141539 0,7 kg Installation Drawing

190 4 NUT ROUND M42/65/45/35 GRADE 10 141531 0,8 kg KING / PEDESTAL
190 3 STUD BOLT M42x385MM DIN976 10.9, BLACK 129943 4,2 kg Slew Ring Bearing & Slewgear
A 4 2 Gearbox SLS4003 9004844 166363 415,0 kg Scale: Projection: Size: Main Part: A
1:20 A1
1 1 Slew Ring 192.36.3932.001.61.1521 154792 5014,0 kg Drawing Number: Sheet: Revision:

Qty. Pos Description/Dimension Material Part No Unit wt. OC3932KM02-M2001 1 /1 0

12 11 10 9 8 7 6 5 4 3 2 1
 Document Number: V3054-Z-MA-001 TOC section 10.5
TABLE OF CONTENTS
Revision: 3
Page: 1

Vol. Chapter/ Title Document Number Rev.

Section

10.5 Flow Diagram

Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0001 2
BLOCK DIAGRAM Pride No. 2
Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0002 4
HPU System Pride No. 2
Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0003 4
Slew System Pride No. 2
Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0004 4
Main Boom System Pride No. 2
Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0005 3
Knuckle Boom System Pride No. 2
Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0006 3
WINCH SYSTEM Pride No. 2
Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0007 2
Pilot System Pride No. 2
Flow Diagram, OC3932KCE Knuckle Boom Crane No. 1 V3054-H0008 3
Yoke Control System Pride No. 2

www.nov.com
National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0001 Drawing Name: Remarks:
Revision: 2 OC3932KCE Knuckle Boom Crane No. 1
Item No: XV3054H0001 BLOCK DIAGRAM Pride No. 2
Updated 08.03.2010 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Item No. Drawing Reference / Remarks

Pos
Unit Wgt. Item Name Tag No.
1 XV3054H0002 V3054-H0002
OC3932KCE Knuckle Boom Crane No. 1;HPU
1910,00
System Pride No. 2;FLOW DIAGRAM
1 XV3054H0003 V3054-H0003
OC3932KCE Knuckle Boom Crane No. 1;Slew
286,74
System Pride No. 2;FLOW DIAGRAM
1 XV3054H0004 V3054-H0004
OC3932KCE Knuckle Boom Crane No. 1;Main
158,35
Boom System Pride No. 2;FLOW DIAGRAM
1 XV3054H0005 V3054-H0005
OC3932KCE Knuckle Boom Crane No. 1;Knuckle
154,05
Boom System Pride No. 2;FLOW DIAGRAM
1 XV3054H0006 V3054-H0006
OC3932KCE Knuckle Boom Crane No. 1;WINCH
249,04
SYSTEM Pride No. 2;FLOW DIAGRAM
1 XV3054H0007 V3054-H0007
OC3932KCE Knuckle Boom Crane No. 1;Pilot
133,29
System Pride No. 2;FLOW DIAGRAM
1 XV3054H0008 V3054-H0008
OC3932KCE Knuckle Boom Crane No. 1;Yoke
159,02
Control System Pride No. 2;FLOW DIAGRAM

Total weight 3050,49

www.nov.com PDFPartslist.exe (1.29.4059.25834) (XAL) 19.02.2011 10:38:06 Page: 1 of 1

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0002 Drawing Name: Remarks:
Revision: 4 OC3932KCE Knuckle Boom Crane No. 1
Part No: XV3054H0002 HPU System Pride No. 2
Updated 06.06.2013 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Part No. / Alternate ID Drawing Reference / Remarks

Pos
Unit Wgt. Part Name Tag No.
2 150713
H01/1-2
172,00 AXIAL PISTON PUMP

2 150712
H01/3-4
172,00 AXIAL PISTON PUMP

2 142306
H01/5-6
15,70 VANE PUMP, 88 CCM

1 154802
H02/1
408,00 PROPORTIONAL VALVE

3 95373
H03/1-3
25,00 RETURN FILTER 650L

1 95634
H03/4
4,10 RETURN FILTER 300L

3 21871
H04/1-3
4,11 FILTER ELEMENT, HYDRAULIC

1 21868
H04/4
1,50 FILTER ELEMENT, HYDRAULIC

1 11100 / 10446102-001
H05
0,39 BALL VALVE 1" LONG THREADED

1 15049
H06/1
0,20 LEVEL GAUGE

2 24273
H06/2-3
0,25 LEVEL GAUGE

2 11098 / 10446097-001
H07/1-2
0,68 BALL VALVE 1 1/4" LONG THREADED

3 11102 / 10446105-001
H07/3-5
0,16 BALL VALVE 1/2" BSP LONG THREDED

1 11098 / 10446097-001
H07/6
0,68 BALL VALVE 1 1/4" LONG THREADED

1 11103
H07/7
0,15 BALL VALVE 3/8" BSP LONG THREDED

www.nov.com PDFPartslist.exe (1.32.4568.11126) (XAL) 20.06.2013 10:42:55 Page: 1 of 3

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0002 Drawing Name: Remarks:
Revision: 4 OC3932KCE Knuckle Boom Crane No. 1
Part No: XV3054H0002 HPU System Pride No. 2
Updated 06.06.2013 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Part No. / Alternate ID Drawing Reference / Remarks

Pos
Unit Wgt. Part Name Tag No.
1 11100 / 10446102-001
H07/8
0,39 BALL VALVE 1" LONG THREADED

2 11117 / 10446129-001
H07/9-10
0,53 BALL VALVE 3/8" R

1 140283
H07/11
1,00 BALL VALVE 1 1/4" FULL BORE, STAINLESS

9 11993 / 10386829-001
H08/1-9
0,10 MINIMESS, 1/4" BSP AISI 316,

2 91777
H09/1-2
160,00 COOLER, OIL/AIR 2,5kW FOR EL.MOTOR

1 REF
H10
0,00 HEATER ELEMENT REF. ELECTRICAL DWG.

1 REF
H11
0,00 TEMP. SENSOR REF. ELECTRICAL DWG.

4 150711
H12/1-4
23,99 PRESSURE FILTER COMPLETE,460L, EL.IND

4 96592
H13/1-4
0,98 PRESSURE FILTER ELEMENT,500LPM

2 21887
H14/1-2
0,40 BREATHER FILTER

4 152646
H17/1-4
7,00 CHECK VALVE 3"

2 152640
H17/5-6
3,03 CHECK VALVE 2"

2 30702
H17/7-8
0,86 CHECK VALVE 1"

4 27314
H17/9-12
1,74 CHECK VALVE 1 1/2"

4 92933
H18/1-4
7,84 RUBBER COMPENSATOR

www.nov.com PDFPartslist.exe (1.32.4568.11126) (XAL) 20.06.2013 10:42:55 Page: 2 of 3

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0002 Drawing Name: Remarks:
Revision: 4 OC3932KCE Knuckle Boom Crane No. 1
Part No: XV3054H0002 HPU System Pride No. 2
Updated 06.06.2013 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Part No. / Alternate ID Drawing Reference / Remarks

Pos
Unit Wgt. Part Name Tag No.
2 160261
H22/1-2
1,67 PROP. PRESSURE REG. VALVE

2 26692
H24/1-2
1,00 MOUNTING PLATE, 3,8", SOLENOID VALVE

2 98599
H31/1-2
49,00 GATE VALVE LAGERSTEDT&KRANTZ

1 REF
H28
0,00 MANIFOLD, RETUR OIL REF. MECHANICAL DWG.

1 REF
H29/1-2
0,00 MANIFOLD, SUCKTION REF. MECHANICAL DWG.

2 REF
M20/1-2
0,00 EL.MOTOR REF.ELECTRICAL

1 95370
H27/1
0,10 ORIFICE 0,6MM

1 HV3054H0002

226,56 Hydraulic Hoselist

Total weight 2052,17

www.nov.com PDFPartslist.exe (1.32.4568.11126) (XAL) 20.06.2013 10:42:55 Page: 3 of 3

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0002 Hydraulic Hoselist
HPU System

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

500 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DEI0028DZDZ No 76,60
183042/50 BAR,/280mm/183734/183734
020 BAR OPERATING PRESSURE/280MM//

501 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DEI0028DZDZ No 76,60
183042/50 BAR,/280mm/183734/183734
020 BAR OPERATING PRESSURE/280MM//

502 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0110IYKP No 5,23
183040/350 BAR/1100mm/183270/183320
345 BAR OPERATING PRESSURE/1100MM//

503 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0245IYKP No 11,64
183040/350 BAR/2450mm/183270/183320
345 BAR OPERATING PRESSURE/2450MM//

504 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0180IYKP No 8,55
183040/350 BAR/1800mm/183270/183320
345 BAR OPERATING PRESSURE/1800MM//

505 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0095IYKP No 4,51
183040/350 BAR/950mm/183270/183320
345 BAR OPERATING PRESSURE/950MM//

506 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DFA0160GJHI No 2,91
183031/210 BAR/1600mm/183219/183238
020 BAR OPERATING PRESSURE/1600MM//

507 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAG0190GJHI No 3,35
183026/210 BAR/1900mm/183219/183238
207 BAR OPERATING PRESSURE/1900MM//

509 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAF0120GHHG No 1,27
183021/280 BAR/1200mm/183217/183236
207 BAR OPERATING PRESSURE/1200MM//

HL100: Date 10/06-13 09:01 Page 1

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0002 Hydraulic Hoselist
HPU System

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

510 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAG0130GJHI No 2,62
183026/210 BAR/1300mm/183219/183238
207 BAR OPERATING PRESSURE/1300MM//

512 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAF0140GHHG No 1,44
183021/280 BAR/1400mm/183217/183236
207 BAR OPERATING PRESSURE/1400MM//

513 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAG0110GJHI No 2,37
183026/210 BAR/1100mm/183219/183238
207 BAR OPERATING PRESSURE/1100MM//

516 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DEJ0220LALG No 3,30
183048/40 BAR,/2200mm/183353/183360
020 BAR OPERATING PRESSURE/2200MM//

517 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DEJ0390LALG No 5,85
183048/40 BAR,/3900mm/183353/183360
020 BAR OPERATING PRESSURE/3900MM//

518 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DEJ0280LALG No 4,20
183048/40 BAR,/2800mm/183353/183360
020 BAR OPERATING PRESSURE/2800MM//

519 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DEJ0380LALG No 5,70
183048/40 BAR,/3800mm/183353/183360
020 BAR OPERATING PRESSURE/3800MM//

520 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0090GDHD No 3,89
183008/350 BAR/900mm/183214/183233
345 BAR OPERATING PRESSURE/900MM//

521 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0103GDHD No 0,63
183008/350 BAR/1030mm/183214/183233
345 BAR OPERATING PRESSURE/1030MM//

HL100: Date 10/06-13 09:01 Page 2

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0002 Hydraulic Hoselist
HPU System

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

522 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0130GDGD No 0,72
183008/350 BAR/1300mm/183214/183214
345 BAR OPERATING PRESSURE/1300MM//

523 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0100GDGD No 0,60
183008/350 BAR/1000mm/183214/183214
345 BAR OPERATING PRESSURE/1000MM//

524 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DFA0090GJHI No 2,09
183031/210 BAR/900mm/183219/183238
020 BAR OPERATING PRESSURE/900MM//

525 V3054-H0002 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DFA0125GJHI No 2,50
183031/210 BAR/1250mm/183219/183238
020 BAR OPERATING PRESSURE/1250MM//

Total weight = 226,56

HL100: Date 10/06-13 09:01 Page 3

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0003 Drawing Name: Remarks:
Revision: 4 OC3932KCE Knuckle Boom Crane No. 1
Part No: XV3054H0003 Slew System Pride No. 2
Updated 10.06.2013 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Part No. / Alternate ID Drawing Reference / Remarks

Pos
Unit Wgt. Part Name Tag No.
0 REF REF. MECHANICAL DWG.
S01/1-4
0,00 SLEW GEARBOX

4 24267
S03/1-4
32,00 AXIAL PISTON MOTOR 125 CCM

5 11993 / 10386829-001
S08/1-5
0,10 MINIMESS, 1/4" BSP AISI 316,

1 146573
S26/1
0,50 SHUTTLE VALVE 1/2"

2 REF REF. MECHANICAL DWG.

S32/1-2
0,00 HIGH PRESS. SLEW MANIFOLD

1 142311
S60
100,00 LOAD CONTROL VALVE, CARTRIDGE, 1200 L/M

1 21501
S27/3
0,09 FLOW CONTROL VALVE, SINGLE ACTION

2 152669
S17/1-2
0,16 CHECK VALVE

2 21751 / 10452066-001
S27/1-2
0,16 FLOW CONTROL VALVE

2 185935
S61/1-2
10,00 SLEW HOLDBACK BLOCK

1 HV3054H0003

51,62 Hydraulic Hoselsit

Total weight 301,36

www.nov.com PDFPartslist.exe (1.32.4568.11126) (XAL) 20.06.2013 10:42:46 Page: 1 of 1

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0003 Hydraulic Hoselsit
Slew System

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

300 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0200JAJI No 5,73
183028/350 BAR/2000mm/183271/183279
345 BAR OPERATING PRESSURE/2000MM//

301 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0150JAJI No 4,66
183028/350 BAR/1500mm/183271/183279
345 BAR OPERATING PRESSURE/1500MM//

302 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0200JAJI No 5,73
183028/350 BAR/2000mm/183271/183279
345 BAR OPERATING PRESSURE/2000MM//

303 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0150JAJI No 4,66
183028/350 BAR/1500mm/183271/183279
345 BAR OPERATING PRESSURE/1500MM//

304 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0200JAJI No 5,73
183028/350 BAR/2000mm/183271/183279
345 BAR OPERATING PRESSURE/2000MM//

305 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0150JAJI No 4,66
183028/350 BAR/1500mm/183271/183279
345 BAR OPERATING PRESSURE/1500MM//

306 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0150JAJI No 4,66
183028/350 BAR/1500mm/183271/183279
345 BAR OPERATING PRESSURE/1500MM//

307 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0200JAJI No 5,73
183028/350 BAR/2000mm/183271/183279
345 BAR OPERATING PRESSURE/2000MM//

308 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0137GEHE No 1,22
183011/310 BAR/1370mm/183215/183234
207 BAR OPERATING PRESSURE/1370MM//

HL100: Date 10/06-13 08:59 Page 1

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0003 Hydraulic Hoselsit
Slew System

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

309 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0090GEHE No 0,98
183011/310 BAR/900mm/183215/183234
207 BAR OPERATING PRESSURE/900MM//

310 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0090GEHE No 0,98
183011/310 BAR/900mm/183215/183234
207 BAR OPERATING PRESSURE/900MM//

311 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0137GEHE No 1,22
183011/310 BAR/1370mm/183215/183234
207 BAR OPERATING PRESSURE/1370MM//

312 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0140GDHD No 0,78
183008/350 BAR/1400mm/183214/183233
345 BAR OPERATING PRESSURE/1400MM//

313 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0100GDHD No 0,62
183008/350 BAR/1000mm/183214/183233
345 BAR OPERATING PRESSURE/1000MM//

314 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0100GDHD No 0,62
183008/350 BAR/1000mm/183214/183233
345 BAR OPERATING PRESSURE/1000MM//

315 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0140GDHD No 0,78
183008/350 BAR/1400mm/183214/183233
345 BAR OPERATING PRESSURE/1400MM//

318 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0130GDGD No 0,72
183008/350 BAR/1300mm/183214/183214
345 BAR OPERATING PRESSURE/1300MM//

319 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0170GDHD No 0,91
183008/350 BAR/1700mm/183214/183233
345 BAR OPERATING PRESSURE/1700MM//

HL100: Date 10/06-13 08:59 Page 2

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0003 Hydraulic Hoselsit
Slew System

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

320 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0130GDGD No 0,72
183008/350 BAR/1300mm/183214/183214
345 BAR OPERATING PRESSURE/1300MM//

321 V3054-H0003 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0075GDHD No 0,51
183008/350 BAR/750mm/183214/183233
345 BAR OPERATING PRESSURE/750MM//

Total weight = 51,62

HL100: Date 10/06-13 08:59 Page 3

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0004 Drawing Name: Remarks:
Revision: 4 OC3932KCE Knuckle Boom Crane No. 1
Part No: XV3054H0004 Main Boom System Pride No. 2
Updated 10.06.2013 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Part No. / Alternate ID Drawing Reference / Remarks

Pos
Unit Wgt. Part Name Tag No.
0 REF
B01/1-2
0,00 HYDR. CYLINDER REF. MECANICAL DWG.

2 94200
B02/1-2
44,80 LOAD CONTROL VALVE, 600L/M

2 94196
B02/3-4
5,90 LOAD CONTROL VALVE, 60L/M

2 11993 / 10386829-001
B08/1-2
0,10 MINIMESS, 1/4" BSP AISI 316,

1 17384
B15/1
0,08 HOSE RUPTURE VALVE

1 154869
B17
0,67 CHECK VALVE 3/4"

1 11116 / 10446124-001
N07/5
0,65 BALL VALVE 1/2"

1 15859
B26/1
0,17 SHUTTLE VALVE

1 HV3054H0004

57,26 Hydraulic Hoselist

Total weight 160,44

www.nov.com PDFPartslist.exe (1.32.4568.11126) (XAL) 20.06.2013 10:42:48 Page: 1 of 1

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0004 Hydraulic Hoselist
Main Boom

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

200 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0250IYIY No 11,88
183040/350 BAR/2500mm/183270/183270
345 BAR OPERATING PRESSURE/2500MM//

201 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0250IYIY No 11,88
183040/350 BAR/2500mm/183270/183270
345 BAR OPERATING PRESSURE/2500MM//

202 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0250IYIY No 11,88
183040/350 BAR/2500mm/183270/183270
345 BAR OPERATING PRESSURE/2500MM//

203 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCI0250IYIY No 11,88
183040/350 BAR/2500mm/183270/183270
345 BAR OPERATING PRESSURE/2500MM//

205 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0170GDGD No 0,89
183008/350 BAR/1700mm/183214/183214
345 BAR OPERATING PRESSURE/1700MM//

206 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0170GDGD No 0,89
183008/350 BAR/1700mm/183214/183214
345 BAR OPERATING PRESSURE/1700MM//

207 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0170GDGD No 0,89
183008/350 BAR/1700mm/183214/183214
345 BAR OPERATING PRESSURE/1700MM//

208 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0170GEGE No 1,17
183011/310 BAR/1700mm/183215/183215
207 BAR OPERATING PRESSURE/1700MM//

209 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0170GEGE No 1,17
183011/310 BAR/1700mm/183215/183215
207 BAR OPERATING PRESSURE/1700MM//

HL100: Date 10/06-13 09:01 Page 1

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0004 Hydraulic Hoselist
Main Boom

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

210 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCF0170JCJC No 2,38
183023/350 BAR/1700mm/183273/183273
345 BAR OPERATING PRESSURE/1700MM//

211 V3054-H0004 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCF0170JCJC No 2,38
183023/350 BAR/1700mm/183273/183273
345 BAR OPERATING PRESSURE/1700MM//

Total weight = 57,26

HL100: Date 10/06-13 09:01 Page 2

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0005 Drawing Name: Remarks:
Revision: 3 OC3932KCE Knuckle Boom Crane No. 1
Part No: XV3054H0005 Knuckle Boom System Pride No. 2
Updated 10.06.2013 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Part No. / Alternate ID Drawing Reference / Remarks

Pos
Unit Wgt. Part Name Tag No.
2 11116 / 10446124-001
N07/3-4
0,65 BALL VALVE 1/2"

2 15859
K26/1-2
0,17 SHUTTLE VALVE

0 REF REF. MEC. DWG.

K01/1-2
0,00 HYDRAULIC CYLINDER

2 94199
K02/1-2
26,30 LOAD CONTROL VALVE, 480L/M

2 94198
K02/3-4
15,40 LOAD CONTROL VALVE, 240L/M

4 150678
K17/1-4
0,22 CHECK VALVE

2 11993 / 10386829-001
K08/1-2
0,10 MINIMESS, 1/4" BSP AISI 316,

2 95371
K27/1-2
0,10 ORIFICE 0,8MM

1 HV3054H0005

72,87 Hydraulic Hoselist

Total weight 159,21

www.nov.com PDFPartslist.exe (1.32.4568.11126) (XAL) 20.06.2013 10:42:59 Page: 1 of 1

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0005 Hydraulic Hoselist
Knickle Boom

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

700 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCH0295IZIZ No 10,89
183034/350 BAR/2950mm/183269/183269
345 BAR OPERATING PRESSURE/2950MM//

701 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCH0225IZJK No 8,30
183034/350 BAR/2250mm/183269/183280
345 BAR OPERATING PRESSURE/2250MM//

702 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCH0225IZJK No 8,30
183034/350 BAR/2250mm/183269/183280
345 BAR OPERATING PRESSURE/2250MM//

703 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCH0280IZIZ No 10,33
183034/350 BAR/2800mm/183269/183269
345 BAR OPERATING PRESSURE/2800MM//

704 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0230JAJA No 6,12
183028/350 BAR/2300mm/183271/183271
345 BAR OPERATING PRESSURE/2300MM//

705 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCG0230JAJA No 6,12
183028/350 BAR/2300mm/183271/183271
345 BAR OPERATING PRESSURE/2300MM//

706 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0265GEGE No 1,65
183011/310 BAR/2650mm/183215/183215
207 BAR OPERATING PRESSURE/2650MM//

707 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0230GEHE No 1,69
183011/310 BAR/2300mm/183215/183234
207 BAR OPERATING PRESSURE/2300MM//

708 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DAD0230GEHE No 1,69
183011/310 BAR/2300mm/183215/183234
207 BAR OPERATING PRESSURE/2300MM//

HL100: Date 10/06-13 09:01 Page 1

National Oilwell Varco Norway
PARTS LIST

Project . . . . . . . . . . . . . . . . . . :
Debtor . . . . . . . . . . . . . . . . . . :
Hullnumber . . . . . . . . . . . . :
Machinenumber . . . . . . . :

Draw number . . . : Document Name Drawing revision . . . . . . :

Item No. . . . . . . . . . : HV3054H0005 Hydraulic Hoselist
Knickle Boom

Item group . . . . . . : 3250-003 HYDRAULIC HOSE COMP.

Pos Drawing Referance Quantity Item name/Technical Info Item No. Supplier / Manufacture / ExCertif Builder Net weight
Supply

709 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0275GDGD No 1,32
183008/350 BAR/2750mm/183214/183214
345 BAR OPERATING PRESSURE/2750MM//

710 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0235GDHD No 1,18
183008/350 BAR/2350mm/183214/183233
345 BAR OPERATING PRESSURE/2350MM//

711 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0200GDHD No 1,03
183008/350 BAR/2000mm/183214/183233
345 BAR OPERATING PRESSURE/2000MM//

712 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0270GDGD No 1,30
183008/350 BAR/2700mm/183214/183214
345 BAR OPERATING PRESSURE/2700MM//

713 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0215GDHD No 1,09
183008/350 BAR/2150mm/183214/183233
345 BAR OPERATING PRESSURE/2150MM//

714 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCC0190GDGD No 0,97
183008/350 BAR/1900mm/183214/183214
345 BAR OPERATING PRESSURE/1900MM//

715 V3054-H0005 1,00 HYD HOSE STEEL ASSEMBLY LENGTH DCH0295IZIZ No 10,89
183034/350 BAR/2950mm/183269/183269
345 BAR OPERATING PRESSURE/2950MM//

Total weight = 72,87

HL100: Date 10/06-13 09:01 Page 2

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0006 Drawing Name: Remarks:
Revision: 3 OC3932KCE Knuckle Boom Crane No. 1
Part No: XV3054H0006 WINCH SYSTEM Pride No. 2
Updated 13.11.2012 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Part No. / Alternate ID Drawing Reference / Remarks

Pos
Unit Wgt. Part Name Tag No.
2 REF REF. MEC. DWG.
W01/1-2
0,00 WINCH REF. MEC. DRAWING

2 90342
W03/1-2
80,00 AXIAL PISTON MOTOR 200 CCM

9 11993 / 10386829-001
W08/1-9
0,10 MINIMESS, 1/4" BSP AISI 316,

2 29513
W14/1-2
0,07 BREATHER FILTER

2 32128
W17/1-2
0,20 CHECK VALVE 1/2"

1 150678
W17/3
0,22 CHECK VALVE

1 28057
W17/4
0,43 CHECK VALVE

1 10186
W17/5
0,60 PILOT CHECK VALVE

1 170400
W20/1
1,00 RELIEF VALVE, 1/2"

2 23200
W32/1-2
1,82 LEAK OIL TANK

3 99614
W43/1-3
1,00 CONTROL VALVE, PILOT OPERATED, SUN

1 28110
W65
75,00 WINCH BLOCK, 480 L/MIN.,

1 95311
W23/1
1,80 Solenoid poppet 3/2 valve, NG6, 24VDC

1 26692
W24/1
1,00 MOUNTING PLATE, 3,8", SOLENOID VALVE

Total weight 248,16

www.nov.com PDFPartslist.exe (1.32.4568.11126) (XAL) 19.11.2012 15:44:52 Page: 1 of 1

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0007 Drawing Name: Remarks:
Revision: 2 OC3932KCE Knuckle Boom Crane No. 1
Item No: XV3054H0007 Pilot System Pride No. 2
Updated 08.03.2010 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Item No. Drawing Reference / Remarks

Pos
Unit Wgt. Item Name Tag No.
1 17733
N01
7,30 HAND PUMP WITH HANDLE

1 98777
N04
1,75 SELECTOR VALVE

2 11117
N07/3-4
0,53 BALL VALVE 3/8" R

1 149844
N23/1
3,00 SOLENOID POPPET VALVE, HAWE

1 154785
N23/2
2,00 SOLENOID POPPET VALVE, HAWE

1 26692
N24/1
1,07 MOUNTING PLATE, 3,8", SOLENOID VALVE

1 26692
N24/2
1,07 MOUNTING PLATE, 3,8", SOLENOID VALVE

3 95369
N27/1-3
0,10 ORIFICE 0,4MM

1 48745
N63
30,00 AOS/MOS BLOCK modified acc.to dwg.

1 28557
N66/1
35,50 BLADDER ACCUMULATOR FOR W/G

1 17499
N68
0,51 PRESSURE SWITCH 05-55bar

1 17499
N71
0,51 PRESSURE SWITCH 05-55bar

1 95541
P01
20,00 PILOT/MOPS OIL SUPPLY UNIT

5 11993
P08/1-5
0,10 MINIMESS, 1/4" BSP

1 145648
P20/1
3,50 PRESSURE RED. VALVE

www.nov.com PDFPartslist.exe (1.29.4059.25834) (XAL) 19.02.2011 10:37:54 Page: 1 of 2

National Oilwell Norway AS
Customer Parts List
Drawing No.: V3054-H0007 Drawing Name: Remarks:
Revision: 2 OC3932KCE Knuckle Boom Crane No. 1
Item No: XV3054H0007 Pilot System Pride No. 2
Updated 08.03.2010 FLOW DIAGRAM
Other Doc No:
Project: V3054-0510
Customer:

Qty Item No. Drawing Reference / Remarks

Pos
Unit Wgt. Item Name Tag No.
4 26689
P23/1-4
1,68 SINGLE SOLENOID VALVE, NG6, 24V DC

1 65972
P23/5
4,80 SOLENOID VALVE, 24V DC

1 45594
P24/1
6,60 BLOCK FOR 4PCS OF VALVE 26689

1 150794
P24/2
2,00 MOUNTING PLATE, 1/2", SOLENOID VALVE

1 15859
P26/1
2,66 SHUTTLE VALVE

1 11117
P07/1
0,53 BALL VALVE 3/8" R

1 15859
P26/2
2,66 SHUTTLE VALVE

1 95673
P23/6
2,20 DOUBLE SOLENOID VALVE, NG6

1 26692
P24/3
1,07 MOUNTING PLATE, 3,8", SOLENOID VALVE

Total weight 137,33

www.nov.com PDFPartslist.exe (1.29.4059.25834) (XAL) 19.02.2011 10:37:54 Page: 2 of 2