Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 1 What is the name of the Netbackup service running after installation of a Windows client? A. NetBackup Windows Service B. NetBackup Client Service C. NetBackup Remote Service D. NetBack File System Service Answer: B Questions: 2 Which NetBackup option uses snapshot technology to perform rapid snapshot-based restores? A. Intelligent Disaster Recovery (IDR) B. True image restore with move detection C. Disk staging storage unit restore D. Instant Recovery Answer: D Questions: 3 In a NetBackup 6.5 environment, the image database resides _____. A. Within the EMM database B. On the EMM server in binary format C. On the master server in binary format D. Within the master server's Sybase database Answer: C Questions: 4 When the master server is running NetBackup version 6.5, what is the minimum version of NetBackup that can be running on a media server? A. 5.0 MP3 B. 5.0 MP4 C. 5.1 D. 5.1 MP4 Answer: B Questions: 5 Which processes are found on a NetBackup UNIX client? (Choose three.) A. bpbkar B. bpbrm C. tar D. bpcompatd E. bpcd Answer: A, C, E Questions: 6 Which statement is true about the relationship between a master server and an EMM server?

Page 1 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

A. An EMM server supports only one master server. B. An EMM server supports more than one master server. C. A master server may use more than one EMM server. D. A master server may use an EMM server one major version behind. Answer: B Questions: 7 NetBackup Operations Manager provides some useful utilities to help manage the NOM database. Which command is used to launch the utility to perform NOM maintenance? A. NOMadmincmd B. NOMadmin C. NOMcmd D. NOMadm Answer: B Questions: 8 Which actions can you take when performing a custom client installation on a Microsoft Windows 2003 system? (Choose two.) A. You can deselect Veritas Snapshot Provider. B. You can change the default port numbers. C. You can only add up to five media servers. D. You can set a custom location for the NetBackup catalog. E. You can select to install the EMM database server. Answer: A, B Questions: 9 Which guidelines should be followed when conducting a NetBackup media server installation? (Choose three.) A. You should remove any other vendor backup software. B. At least one tape drive should be available for backup operations. C. All NetBackup servers should recognize and be recognized by their client systems. D. You should make certain that you have a server of a supported hardware type running a supported version of an OS. E. You should remove previous versions of NetBackup in a Windows environment. Answer: A, C, D Questions: 10 What is updated during a NetBackup installation on Windows 2003? A. C:\WINDOWS\System32\drivers\etc\services and C:\\WINDOWS\System32\drivers\etc\hosts B. C:\WINDOWS\System32\drivers\etc\services and Windows Registry C. C:\WINDOWS\System\drivers\etc\services and C:\\WINDOWS\System\drivers\etc\hosts D. C:\WINDOWS\System\drivers\etc\services and Windows Control Panel Answer: B Questions: 11

Page 2 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

You have just installed a NetBackup 6.5 master server and the EMM server is on a different machine. In addition to bprd, bpjobd, and nbpem, which other processes would be running on the master server if the installation was successful? A. bpbrm, nbrb B. bpdbm, nbemm C. bpdbm, nbjm D. bpbrm, nbjm Answer: C Questions: 12 Which statements are true about upgrading an existing NetBackup installation to NetBackup 6.5? (Choose two.) A. All master and media servers must be on the same revision level. B. All clients must be on the same revision level as their media servers. C. A media server may be one major revision level lower than the master server. D. A client may be one major revision level lower than the master server. E. A master server may be one major revision level lower than a media server. Answer: C, D Questions: 13 Which backup method can restore individual files from a raw disk backup? A. Copy on write snapshot B. Mirror snapshot C. FlashBackup D. True image restore Answer: C Questions: 14 When a restore is performed to client A, which process will go active when the restore starts? A. Tar B. Bpbkar C. Bpbkar32 D. Tar32 Answer: D Questions: 15 Netbackup 6.5 is configured with a disk storage unit with staging enabled. Some of the images in the disk storage unit have been successfully duplicated. The disk storage unit becomes full. What happens next? A. Duplicated images are purged until the disk storage unit can hold the next backup. B. Duplicated images are purged until 98% below the disk capacity has been reached. C. Duplicated images are purged until the high water mark has been reached. D. Duplicated images are purged until the lower water mark has been reached. Answer: D

Page 3 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 16 Which report provides a list of media that were used in the last five hours? A. Tape Lists B. Tape Written C. Tape Contents D. Tape Summary E. Status of Backups Answer: B Questions: 17 Which two commands can be used to check and update the robot inventory? (Choose two.) A. vmcheck B. bpupdate C. vmchange D. vmupdate E. vmcheckxxx Answer: D, E Questions: 18 A restore must be performed. You have gone into the Backup Archive and Restore GUI and are trying to view the valid images for clientA but the following error occurs: WARNING: Server does not contain any valid images. Which options may be incorrectly configured? (Choose three.) A. Source client for restores B. Destination client for restores C. Server to use for backups and restores D. Media server for restore E. Policy types for restore Answer: A, C, E Questions: 19 Consider the following: Your environment has one master server and six SAN media servers. The systems use Shared Storage Option (SSO) to share ten tape drives on a single robot. Backups run at night to various media servers and you want to duplicate all backups during the day. All duplications must run on the master server to free media server resources. What would you do to allow the master server to perform all duplications? A. Clear Drive Duplication Enabled in the Device Manager for SAN media servers. B. In the Vault policy, set Alternate Server Duplicate Disable for SAN media servers. C. Set an offsite volume pool for master server access only. D. Set an alternate read server in the Vault Management Properties tab. Answer: D Questions: 20
Page 4 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Which factors affect the physical expiration of media? (Choose two.) A. Date B. Media full C. Number of mounts D. Media being moved to a new server E. Changing the backup retention level Answer: A, C Questions: 21 A suspended backup job writing to a basic disk storage unit is resumed and the basic disk storage unit has already reached its maximum concurrent job limit with other jobs. What will happen with the backup job, assuming the basic disk storage unit is unavailable to a disk storage group? A. The backup will stay queued until a job finishes. B. The backup will fail with the storage unit unavailable. C. The backup will continue backup to a spanned disk. D. The backup will prompt for a different basic disk storage unit. Answer: A Questions: 22 A tape is automatically frozen when NetBackup attempts to use it for a policy backup. Which condition can cause this? A. The tape is full. B. The tape has expired. C. The tape is already in use. D. The tape has been used for NetBackup catalogs. Answer: D Questions: 23 Which command is used to expire all the images on a selected media ID? A. bpexpire B. bpexpdate C. bpdelete D. bpmedia Answer: B Questions: 24 Which statement is true about the NetBackup Support Utility (NBSU)? A. NBSU can be invoked from the console by selecting Help-->Gather support information. B. NBSU can be run on the master server to collect information on a remote media server. C. NBSU collects data on NetBackup as well as the operating system and hardware. D. NBSU will only function on NetBackup master servers and media servers. Answer: C Questions: 25
Page 5 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Which options are listed in the Job Overview tab of backup jobs? (Choose two.) A. EMM Server B. Master Server C. Policy Type D. NOM Server E. MB/Sec Answer: B, C Questions: 26 Which function can you perform from the Backup, Archive, and Restore interface? A. Preview amount of disk space required for the restore. B. Preview media required prior to the restore. C. Check permissions on the destination machine. D. Check available space on the destination. Answer: B Questions: 27 Which methods can be used to identify which jobs are running? (Choose two.) A. View the bpcd log B. Run bpclntcmd -ps C. View the Activity Monitor D. Run bpdbjobs -report E. Run nbemmcmd Answer: C, D Questions: 28 Which factors can determine the number of data streams that can run concurrently? (Choose three.) A. Available devices B. Network bandwidth C. Multiplexing setting D. MAX_STREAMS setting E. Maximum jobs per client setting Answer: A, C, E Questions: 29 The ALL_LOCAL_DRIVES directive is selected as a backup selection of a Windows client. Multiple data streams are enabled. There is one client in the client list. What is the behavior of NetBackup? A. All locally mounted file systems are backed up with each file system constituting a separate backup job and Shadow Copy Components:is included in the backup of C:\ . B. All locally mounted file systems are backed up with each file system constituting a separate backup job and Shadow Copy Components:is a separate job. C. All locally mounted file systems are backed up with all file systems constituting a single backup job and Copy Components:is included in the backup of C:\ .

Page 6 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

D. All locally mounted file systems are backed up with all file systems constituting a single backup job and Copy Components:is a separate backup in the image: Answer: B Questions: 30 Which log do you monitor to determine if multiplexing could improve performance? A. bptm B. bprd C. nbjob D. nbpem Answer: A Questions: 31 Which logs are typically used to determine the performance of a backup to a tape drive over the network? (Choose two.) A. bprd B. bpcd C. bptm D. bpbkar(32) E. bpdm Answer: C, D Questions: 32 You want to use multiple disk destinations for backup. What is the recommended configuration for disk storage destinations in NetBackup, using BasicDisk? A. A folder for each destination and a storage unit for each subdirectory. B. A drive letter for each destination and a storage unit for drive letter. C. A drive letter for each destination and a single storage unit. D. A folder for each destination and a single storage unit. Answer: B Questions: 33 Which command can be used to configure tape drives and robotic devices? A. tpautoconfig B. tpconfig C. tpreq D. tpext Answer: B Questions: 34 Which command can be used to manage volume pools? A. nbemmcmd B. vmpool C. vmcheckxxx D. vmupdate
Page 7 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: B Questions: 35 Which policy attribute allows backups to be restarted, without starting from the beginning? A. Cross mount points B. Take checkpoints every C. Collect true image restore information D. Collect disaster recovery information Answer: A Questions: 36 Where can you configure media ownership? (Choose two.) A. Policy-->Attributes B. Policy-->Schedules C. Volume pools D. Master server host properties E. Media server host properties Answer: A, B Questions: 37 Where in the NetBackup Administration console is the backup fragment size set? A. Policies B. Storage Units C. Media Manager-->Devices D. Host Properties-->Media Manager Answer: B Questions: 38 What is the default number of days that a failed restore job can remain in an Incomplete state prior to being moved to a Done state? A. 1 B. 3 C. 7 D. 14 Answer: Pending Questions: 39 You have a policy as follows: Four Windows 2003 clients, each client having a C:\ and D:\ drive Allow multiple data stream selected ?Storage Unit with 16 drives ALL_LOCAL_DRIVES selected How many data streaming backup jobs will run simultaneously? A. 4 B. 8 C. 12
Page 8 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

D. 16 Answer: C Questions: 40 Which capabilities are available in the NetBackup 6.5 calendar-based scheduler? (Choose three.) A. Run a user backup job B. Run a cold catalog backup C. Exclude a backup job on a specific date D. Run a backup job on the fourth Friday of the month E. Run a backup job on the last calendar day of the month Answer: C, D, E Questions: 41 To use NetBackup LiveUpdate, your LiveUpdate clients must be at version _____ or greater. A. 5.0 B. 5.1 C. 6.0 D. 6.5 Answer: D Questions: 42 Which area of a policy is used to assign a retention level for a backup job? A. Files B. Clients C. Attributes D. Schedules Answer: D Questions: 43 The NetBackup system administrator receives a request to ensure the daily backup of the Registry on all Microsoft Windows 2003 Servers. Which file list ensures the backup of the Microsoft Windows Registry? A. C:\ B. Registry:\ C. Shadow_Copy_Components:\ D. LOCAL_DRIVES Answer: C Questions: 44 What must be done before configuring a new AdvancedDisk disk pool? A. Define an AdvancedDisk storage server. B. Create an AdvancedDisk storage unit. C. Inventory the disk enclosure in NetBackup. D. Format the volumes using the nbdevconfig command.

Page 9 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: A Questions: 45 Where can Windows Open File Backup be disabled? A. Master Servers-->Universal Settings B. Master Servers-->Client Attributes C. Media Servers-->Universal Settings D. Clients-->Client Attributes Answer: B Questions: 46 You enabled Multiple Data Streams for a policy. Which file list backs up local volumes C:\, D: and E:\ using two streams? A. C:\ D:\ NEW_STREAM E:\ NEW_STREAM B. C:\ D:\ NEW_STREAM E:\ C. NEW_STREAM C:\ D:\ NEW_STREAM E:\ D. NEW_STREAM ALL_LOCAL_DRIVES NEW_STREAM Answer: C Questions: 47 Which storage unit types are supported with synthetic backup? A. Tape storage units only B. Disk storage units only C. Tape and disk storage units only D. Tape, disk, and NDMP storage units Answer: C Questions: 48 Which steps do you perform to set up a scratch pool? (Choose two.) A. Create a volume pool. B. Add a line in bp.conf: SCRATCH_POOL = SCRATCH. C. Create a file called SCRATCH_POOL and type SCRATCH in it. D. Mark the Scratch Pool checkbox in the NetBackup Administration console. E. Create a volume group called Scratch Pool. Answer: A, D Questions: 49 There are ten tape drives of the same type attached to one media server. Company policy dictates that at least one drive is always available for restores. How can you accomplish this? A. You configure ten tape drives and create a second storage unit with at least one tape drive for use with restores. B. You configure ten tape drives. The total number of tape drives defined in all storage units must be less than ten. C. You configure nine tape drives and create a second storage unit with at least one tape drive for use with restores.

Page 10 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

D. You configure nine tape drives. The total number of tape drives defined in all storage units must be less than nine. Answer: B Questions: 50 Which policy tab is used to specify the e-mail address for the disaster recovery file? A. Attributes B. Schedules C. Disaster D. Recovery E. Backup Selections Answer: C Questions: 51 What is the advantage of using SCSI Persistent Reserve (SPR) over SCSI-2 Primary Command (SPC-2) reservation? A. SPR can be used in mixed environments with SPC-2 Reserve. B. SPR will be retained over SCSI bus resets. C. SPR reservation standard is more mature. D. SPR reservation is supported by more operating systems. Answer: B Questions: 52 How should you verify Windows tape device driver operation? A. Run the scan command. B. Run tpautoconfig on the media server. C. Run robtest on the media server. D. Run tpconfig on the servers connected to the tape device. Answer: A Questions: 53 What do you select to create a storage lifecycle policy? A. Policies-->Storage Lifecycle Policies B. Storage-->Storage Lifecycle Policies C. Policies-->New Policy-->Storage Lifecycle Policies D. Storage-->Storage Policies-->Storage Lifecycle Policies Answer: B Questions: 54 When installing NetBackup, you select a server type for the LiveUpdate agent. What does the server type specify? A. The operating system of the master server B. The operating system of the LiveUpdate server C. How to access the master server D. How to access the release updates
Page 11 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: D Questions: 55 What should you use to make more than one copy of a NetBackup 6.5 hot catalog backup at the time of the backup creation? A. Storage lifecycles B. Multiple copies C. Duplication D. NetBackup Vault Answer: B Questions: 56 Backups that target an AdvancedDisk storage unit are unable to span _____. A. To a different volume in the disk pool. B. To a volume with a different file system. C. From one disk pool to another. D. From one disk enclosure to another. Answer: B Questions: 57 Where in the media server host properties is the master server defined? A. Servers B. Global Master C. General Server D. Universal Attributes Answer: A Questions: 58 A new policy has been created with Full and Incremental schedules using a PoolB volume pool. The Incremental schedule is using the tapes out of the PoolB volume pool. A volume pool, named PoolA, has been configured for incremental backups. How do you enable the Incremental schedule to use the PoolA volume pool? A. Policy-->Attributes-->Policy volume pool-->PoolA B. Policy-->Schedules-->Incremental-->Policy volume pool-->Deselect PoolB C. Policy-->Schedules-->Attributes-->Override policy volume pool-->Incremental-->PoolA D. Policy-->Schedules-->Incremental-->Attributes-->Override policy volume pool-->PoolA Answer: D Questions: 59 Which statement is true about a policy that has its start window set to daily from 8:00 p.m. to 11:00 p.m.? A. Backups will always start at 8:00 p.m. B. Backups will never run past 11:00 p.m. C. Backups will never start after 11:00 p.m. D. Backups will pause at 11:00 p.m.
Page 12 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: C Questions: 60 Which statement is true about storage lifecycles? A. Staged capacity managed retention is only available on disk storage units. B. Backups are guaranteed to remain on the disk for the desired cache period. C. Data classifications are required if backing up to tape storage units. D. Backup types include backup, duplicate, and catalog. Answer: C Questions: 61 What is the maximum number of backup destinations allowed in a storage lifecycle policy? A. 6 B. 8 C. 10 D. 12 Answer: C Questions: 62 Which volume pools can be configured for Maximum Partially Full (MPF)? A. NetBackup B. CatalogBackup C. scratch D. none Answer: A Questions: 63 You are adding two more tape drives to an existing library with two tape drives. Even though the new devices have been successfully configured in NetBackup, NetBackup continues to use only two tape drives. Which is a possible cause of the problem? A. Tape drive location B. Storage unit definition C. Storage unit group definition D. Storage unit group prioritization Answer: B Questions: 64 After replacing a tape drive, which command should be run to update the NetBackup device configuration? A. tpautoconfig -replace_drive B. tpconfig -replace_drive C. tpautoconf -replace_drive D. tpdriveconfig -replace_drive Answer: C
Page 13 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 65 A user backup must be performed from the client every Friday night. What does the NetBackup administrator need to do to accomplish this? A. Create a User Backup policy type. B. Create a User Backup schedule. C. Create a Full Backup schedule with user backup permissions allowed. D. Create a User Backup schedule and use Frequency to allow the backup on Friday. Answer: B Questions: 66 The NetBackup system administrator wants to add four new clients to an exsisting policy. After adding the new clients to the policy's Clients tab, the Hardware and Operating System is undetected. What does the NetBackup system administrator need to do? A. Enable Collect disaster recovery information. B. Enable Detect operating system when adding new clients or changing a client. C. Enable Auto detect client hardware and operating system in the host properties. D. Enable Use random port assignments in the host properties. Answer: B Questions: 67 Which command is used to show tape drive status? A. nbemmcmd B. tpautoconf C. vmoprcmd D. scan Answer: C Questions: 68 There is a NetBackup 6.5 master server running Microsoft Windows 2003. Which actions must be performed to back up a Redhat AS 3 client? (Choose two.) A. Install the NetBackup 6.5 media server software for Linux on the client. B. Install the NetBackup 6.5 for Linux client software on the client. C. Create an Linux policy type and add the Linux client name to the client list. D. Create a standard policy type and add the Linux client name to the client list. E. Install NetBackup 6.5 for Linux using the Install Client GUI on the master server. Answer: B, D Questions: 69 Which setting determines the retry behavior of a backup job? A. Policy attributes-->Job try interval B. Schedule attributes-->Job try interval C. Master server host properties-->Schedule backup attempts D. Media server host properties-->Schedule backup attempts Answer: C
Page 14 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 70 You have a Windows NetBackup client running NetBackup 6.0 MP3 and a supported database. You are upgrading this client and database agent to 6.5 without using LiveUpdate. What is required to upgrade to the 6.5 client? A. Load and patch the database agent and then the client. B. Load and patch the client and then the database agent. C. Load and patch the client, which includes the database agent. D. Load and patch the client and then run the update command. Answer: C Questions: 71 Where can you run NetBackup LiveUpdate policies? A. Only from the master server. B. From the server where release updates are stored. C. Only from the EMM server. D. From the master server, the media server, and the client. Answer: A Questions: 72 Which command can you use to bring a down drive to an up state? A. vmup B. vmcheck C. vmoprcmd D. vmcheckxxx Answer: C Questions: 73 Due to a hardware failure, the NetBackup master server must be reinstalled on a new system. After this installation, what should be done to recover the NetBackup catalogs? A. Recover the NetBackup catalogs and then patch to the most current release update. B. Recover the NetBackup catalogs and then patch to the same release update previously installed. C. Patch to the most current release update and then recover the NetBackup catalogs. D. Patch to the same release update previously installed and then recover the catalogs. Answer: D Questions: 74 A NetBackup administrator receives Status Code 58 Can't connect to client every time there is a backup attempt of the client named alpha. Which command can be used to help determine if the NetBackup client service is listening? A. bpclntcmd -hn alpha B. bpplclient -hn alpha C. bptestbpcd -client alpha D. bpclient -client alpha

Page 15 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: C Questions: 75 Which options are available when selecting a media ID in the NetBackup Administration console? (Choose three.) A. Quick erase B. Long erase C. Expire D. Unassign E. Freeze Answer: A, B, E Questions: 76 Which statements are true about legacy logging? (Choose three.) A. Legacy logs should always be enabled. B. Processes or services must be restarted to activate some legacy logging. C. Log folders or directories must be created for each process to be logged. D. Logging levels are set in the host properties. E. Legacy logs are written in the same format as unified logs. Answer: B, C, D Questions: 77 You are investigating a tape drive failure on a Windows media server. In which locations can you find information about the failure? (Choose three.) A. bpdm log B. Activity Monitor C. bptm log D. Application and system event logs E. Security log Answer: B, C, D Questions: 78 Which command can be run from the client to verify client-to-master host name resolution and configuration within NetBackup? A. bpclntcmd -pn B. bpclntcmd -ip C. bpclntcmd -client D. bpclntcmd -master Answer: A Questions: 79 Which standard format is used to name unified logs? A. Productid-originatorID-hostID-date-rotation.log B. Originatorid-productID-hostID-date-rotation.log C. Date-productID-originatorID-hostID-rotation.log D. Rotation-productID-originatorID-hostID-date.log
Page 16 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: A Questions: 80 NetBackup is unable to communicate with a Windows media server tape device after it has been configured. What should you do to troubleshoot this problem? A. Check the Device Manager and verify the tape driver. B. Check the Device Manager and device configuration file. C. Check the Device Manager and device setup file. D. Check the Device Manager and the bpdm log. Answer: A Questions: 81 Where do you create log folders to enable legacy debug logging? A. Install_path\NetBackup\log B. Install_path\NetBackup\logs C. Install_path\NetBackup\debug\log D. Install_path\NetBackup\debug\logs Answer: B Questions: 82 A job fails with Status Code 96: unable to allocate new media. What causes this error? (Choose two.) A. The tape device is down. B. The robot is incorrectly defined. C. The media server is offline. D. The density of available media is invalid. E. The scratch pool is empty. Answer: D, E Questions: 83 Which NetBackup process is responsible for reading and writing to a tape device? A. bpdm B. bptm C. gnutar D. tar Answer: B Questions: 84 Which command can be used to simulate the hot, online Recover the Catalogs wizard in the NetBackup Administration console? A. bprecover -gui B. bprecover -wizard C. bprecover -wgui D. bprecover -wiz

Page 17 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: B Questions: 85 Several new NetBackup clients have been brought online. The NetBackup client software is installed and configured identically on all client systems. A test backup is run to verify that the clients can be backed up. Approximately half of the jobs failed with status code 59. What is a possible cause for this job failure? A. All available storage units were used and some media servers were missing from the client's server lists. B. The media server used by the test backup did not have a network path to some clients. C. The media server was unable to resolve the host names of all of the new clients. D. Some of the clients did not support the policy type configured in the test backup. Answer: A Questions: 86 A client backup failed with Status 213: no Storage Units available for use. The client is in a policy that is directed toward Any Available storage unit. What is a possible reasons for Status Code 213? A. Storage units are set to Maximum concurrent jobs = 1. B. Storage units are set to Maximum concurrent write drives = 1. C. Storage units media is unavailable. D. Storage units are set to On Demand Only. Answer: D Questions: 87 Which NetBackup process is responsible for reading data from the client during a backup? A. bprd B. bpcd C. bpbkar32 D. bpbackup Answer: C Questions: 88 Which NetBackup tool is available to test a tape library? A. robtest B. tptest C. avrtest D. robotic_test Answer: B Questions: 89 A recovery of your NetBackup catalogs has failed. Which location contains a log of the recovery? A. Install_path\NetBackup\logs\bprecover B. Install_path\NetBackupDB\logs C. Install_path\NetBackup\logs\user_ops\username\logs D. Install_path\NetBackup\logs\logs (unified logs)
Page 18 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: C Questions: 90 Where is the NetBackup Support Utility (NBSU) located in NetBackup 6.5? A. Install_path\Netbackup\support B. Install_path\Netbackup\bin\support C. Install_path\Netbackup\bin\goodies\support D. Install_path\Netbackup\bin\admincmd\support Answer: B Questions: 91 You are browsing a Tape List report to determine tapes that will be available for reuse in the near future. You encounter several tapes that have a status of suspended. Which statement about the suspended status is correct? A. You are unable to use this tape for backup or restore. B. You can restore from this tape but it will only be used again for backups once a restore is run. C. You can restore from this tape but it will not be used again for backups until all other images expire. D. You are unable to perform backups or restores to this tape until all other images on the tape have expired. Answer: C Questions: 92 You are running a restore. If the job fails, how many times will the job attempt to retry the restore? A. 0 B. 1 C. 2 D. 3 Answer: A Questions: 93 A tape with media ID ABC001 is assigned to the Scratch volume pool. A policy is configured to use the NetBackup volume pool. The policy runs and media ID ABC001 is automatically assigned to the NetBackup volume pool from the Scratch pool. All the images on media ID ABC001 expire. In a default NetBackup 6.5 configuration, in which volume pool will media ID ABC001 appear? A. Scratch B. DataStore C. NetBackup D. None Answer: A Questions: 94 You are reviewing the available_media output. If the robot type is listed as NONE, the tape would be _____. A. In the tape library
Page 19 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

B. In the tape drive C. Out of the tape library D. Out of the tape drive Answer: C Questions: 95 Which options are listed in the Detailed Status tab of backup jobs? (Choose three.) A. Job PID B. Master Server C. Policy Type D. Storage Unit E. Media Server Answer: A, D, E Questions: 96 You are at a disaster recovery site, testing restores from your offsite duplicate tapes. To begin performing restores, you must change the duplicate copies to be the primary copy. Which commands can you use to accomplish this? (Choose two.) A. bprecover B. bpchangeprimary C. bpimage D. bpexpdate E. bprestore Answer: B, C Questions: 97 Which items can be found in the Activity Monitor window? (Choose four.) A. Client B. Status C. Start time D. Backup ID E. Throughput F. Device name Answer: A, B, C, E Questions: 98 How can you determine which tapes are allocated for backups and which tapes are ready to write backups? (Choose two.) A. Tape Contents B. Tape List C. Images on Media D. Media Logs E. available_media Answer: B, E Questions: 99
Page 20 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Which NetBackup report enables you to quickly determine the number of active, full, suspended, and frozen volumes on a given server? A. Tape List B. Media Logs C. Tape Written D. Tape Summary E. Volume Summary Answer: D Questions: 100 You need to make available a disk-based image from master server A to the disk storage unit on master server B. What is the quickest way to accomplish this task? A. Duplicate the image to tape on master A, move the tape to master B and import the image, and then duplicate the image to disk on master B B. B. Copy the complete disk image from master A to master and then import the image from the disk on master B C. On master B, set alternate read server to master A and duplicate the image to the disk on master B D. On master B, duplicate the disk image from master A to master B disk Answer: B Questions: 101 Your tape library has just had the robot firmware upgraded and now the robot is reading the bar codes with additional characters. Which rule can be set up to have NetBackup use the same characters as before the firmware upgrade occured? A. MediaID generation rule B. MediaID creation rule C. MediaID barcode rule D. MediaID setup rule Answer: A Questions: 102 What are the rollover mode options in unified logs? A. File size, elapsed time, time of day B. File size, verbose level, number of logs C. File size, originator setting, time of day D. File size, product ID, number of logs Answer: A Questions: 103 Which NetBackup process is responsible for reading data from the client during a backup? A. bprd B. bpcd C. bpbkar D. tar

Page 21 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: C Questions: 104 Which logs are useful to enable on the client? (Choose two.) A. nbproxy B. bpcd C. nbpem D. bpbkar E. bpbrm Answer: B, D Questions: 105 You want to keep master server debug logs for five days. Which host properties tab do you use to configure the duration to retain logs? A. Servers B. Logging C. Global Attributes D. Universal Settings E. Clean-up Answer: E Questions: 106 You have recovered all of your NetBackup catalogs using the GUI, which has used the only two catalog backup tapes. The recovery has been successful. A number of backups have taken place and a catalog backup is run automatically. The catalog backup fails with an error code 96. You investigate and find that all of the tapes have been allocated. What is the cause of this error? A. The catalog recovery freezes the tapes. B. The catalog recovery suspends the tapes. C. The catalog recovery places them into a different volume pool. D. The catalog recovery expires the tape within Media Manager. Answer: A Questions: 107 You are performing a disaster recovery of a NetBackup master server to a new system. Another person has configured the system to run the NetBackup database recovery. The recovery is run and you receive the following error message: The following DR media could not be located in NetBackup database. Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database. Host MediaID Barcode train1 GBP84 7 GBP847S1 You locate the barcode in NetBackup and find the media ID has been set to P847S1. All media IDs are in a similar format. The library has 200 tapes and you do not know how many DR tapes you need. What can you do to guarantee the tapes will be found?
Page 22 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

A. Note the slot number of GBP847S1, delete it and add it back in manually as media ID GBP847, and then run the recovery. B. Delete all of the tapes and set the Media ID generation rule, reinventory the library, and then run the recovery. C. Use robtest to mount the media and run the recovery manually. D. Use tpreq to mount the media and run the recovery manually. Answer: B Questions: 108 You have the following configuration: NBU master server: Mas-server NBU media server: Med-server Mas-server and Med-server are configured to share four tape drives. Mas-server is the robot control host. There is a problem with the tape library and you need to run robtest. On which system would you run robtest? A. Mas-server only B. Med-server only C. EMM server only D. Mas-server or Med-server Answer: A Questions: 109 Where can you find the definition of a status code of a failed job? (Choose two.) A. Reports-->Summary B. NetBackup Administration console-->Help-->Troubleshooter C. NetBackup Troubleshooting Guide D. NetBackup System Administrators Guide E. NetBackup Administration console-->Failed Jobs-->Troubleshooter Answer: B, C Questions: 110 What is the default location for unified logs? A. Install_path\logs B. Install_path\netbackup\logs C. Install_path\netbackup\bin\logs D. Install_path\netbackup\support\logs Answer: B Questions: 111 After installing NetBackup client software on a new client, backups fail with a status code indicating that NetBackup is unable to communicate with the client. Which action can you take to pinpoint the source of the problem? A. Verify that the NetBackup client is listening. B. Verify that the bptm process is running on the client. C. Check the bprd log to verify that the backup has initiated.
Page 23 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

D. Check that the bpbkar process is running. Answer: A Questions: 112 You attempt a catalog backup that fails with Status Code 180: cannot overwrite media, data on it is protected. You determine that this is the correct media and want to overwrite it. Which option should you change? A. ALLOW_MEDIA_OVERWRITE B. ALLOW_CATALOG_OVERWRITE C. MEDIA_OVERWRITE_ALLOW D. CATALOG_OVERWRITE_ALLOW Answer: A Questions: 113 Which command can be used to display information about the tape library? A. Scan -changer B. Scan -tape C. tpconfig -changer D. tpconfig -tape Answer: A Questions: 114 A NetBackup system administrator is trying to restore the NetBackup catalogs after a hard disk crash. Which command is used to restore the NetBackup catalogs? A. bprestore B. bprecover C. dbrestore D. dbrecover E. nbdbrecover Answer: B Questions: 115 You review your backup reports and find that last night, a large number of backup jobs failed with status code 196. What could cause this status code? A. The supply of available media was exhausted. B. One or more clients failed to respond. C. Heavy network congestion caused timeouts. D. The backup window closed before all backups completed. Answer: D Questions: 116 After replacing a tape drive, which NetBackup command can you run to verify the operating system is seeing the new tape drive? A. Scan -all B. Scan -os
Page 24 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

C. Tape -scan D. Tape -config Answer: A Questions: 117 In NetBackup and Media Manager, which are allowable configurations? (Choose two.) A. Storage unit media type=DLT, device=DLT, robot=TLD B. Storage unit media type=DLT2, device=DLT, robot=TLD C. Storage unit media type=DLT2, device=DLT2, robot=TL8 D. Storage unit media type=DLT2, device=DLT2, robot=TLD E. Storage unit media type=DLT4, device=DLT4, robot=TLD Answer: A, D Questions: 118 How do you initiate a LiveUpdate policy from the NetBackup Administration console? A. File-->LiveUpdate B. Actions-->LiveUpdate C. Policy-->policy_name D. LiveUpdate-->Run Answer: A Questions: 119 How would a NetBackup system administrator remove a client from Clients under Hosts Properties? A. Remove the client from all policies. B. Delete the client from Clients under Hosts Properties. C. Deactivate any policy the client is in. D. Remove client from the list of available clients. Answer: A Questions: 120 Which command can you use to list the media contents of a robot? A. vmcheck B. tpconfig C. vmoprcmd D. vmcheckxxx Answer: D Questions: 121 A site is running the following: NetBackup master server 6.5 NOM 6.5 NetBackup clients 6.5, 6.0, and 5.1 You want to upgrade the site to the next patch level for the 6.5 clients.
Page 25 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

What is correct method for updating the clients that are running 6.5 to the latest release? A. Install the patch on the master server, the 5.1 clients, and then the 6.5 clients. B. Install the patch on the master server, the NOM server, and then the 6.5 clients. C. Install the patch on the master server, the NOM server, the 6.0 clients, and then the 6.5 clients. D. Install the patch on the 6.5 clients only. Answer: B Questions: 122 How do you ensure that your policies are backing up all volumes/file systems on all of your clients? A. Use bp_testall B. Use bpconfirm C. Use check_coverage D. Check the Backup_All option in every policy Answer: C Questions: 123 You are removing a media server from a NetBackup 6.5 environment. Which actions are performed prior to shutting down the media server? (Choose two.) A. Use bpmedia with the moveDB option to migrate media IDs from their media DB to the master's media DB. B. Remove the media server's volume database using the Device Configuration GUI on the master server C. Remove the master server from the media server list. D.Remove the storage unit reference to this media server from the master server's configuration. D. Remove the media server host name from the master server list. Answer: A, D Questions: 124 In which directory is it possible to create aliases for NetBackup clients? A. Aliases B. Altnames C. Peernames D. Altpath Answer: B Questions: 125 What are functions of the EMM server? (Choose three.) A. It provides a decentralized data store. B. It provides a centralized data store. C. It manages the allocation of resources. D. It communicates with media servers. E. It stores the image catalog. Answer: B, C, D
Page 26 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 126 Which NetBackup 6.5 feature can be deselected during a Microsoft Windows 2003 media server custom installation? A. Veritas Snapshot Provider B. Veritas Vault Option C. Veritas NetBackup for Microsoft Exchange Server D. Veritas NetBackup for Microsoft SQL Server Answer: A Questions: 127 The NetBackup system administrator has been tasked with creating a policy for a Windows client. The client has millions of small files on the system and needs the ability to restore a single file. Which policy type should the administrator use? A. Raw-partition B. Raw-partition-Windows C. FlashBackup D. FlashBackup-Windows Answer: D Questions: 128 Which statements are true about installing multiple media servers? (Choose two.) A. All media server installations require a server license key. B. All media server installations must be pushed from the master server. C. All media server installations should be performed as root/administrator. D. All media server installations can be pushed from a media server with the same OS. E. All media server installations require a tape drive be configured on the system. Answer: A, C Questions: 129 You have a NetBackup installation where the master and EMM servers are two separate servers. Which NetBackup components are found on the EMM server? A. nbemm, nbproxy, pbx, nbrb B. nbemm, nbjm, pbx, nbproxy C. nbemm, pbx, nbrb, nbjm D. nbemm, nbproxy, nbrb, nbjm Answer: A Questions: 130 Which port is used by vnetd on both UNIX and Windows clients? A. 13720 B. 13721 C. 13723 D. 13724 Answer: D
Page 27 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 131 Consider the following: A heavily-used file server must be configured as a NetBackup client. The server is in production around-the-clock. Backups must have little effect on client disk I/O and CPU. The client data exists on SAN-attached disks. Which NetBackup method would best fit this scenario? A. Raw partition B. Off-host backup C. Copy on write snapshot D. Mirror snapshot Answer: B Questions: 132 When installing NetBackup 6.5, which documents should be reviewed before installing the application? (Choose three.) A. Release Notes B. Hardware Compatability Guide C. Hardware Supported List D. Operating System Compatability Guide E. Operating System Supported List Answer: A, B, D Questions: 133 Which Symantec shared component is required for the installation of NetBackup Operations Manager? A. Symantec Private Authorization Service B. Symantec Private Authentication Service C. Symantec Product Authorization Service D. Symantec Product Authentication Service Answer: D Questions: 134 As part of a hot catalog backup, which NetBackup components are backed up? (Choose three.) A. EMM database B. Image database C. NOM database D. Configuration files E. Hosts file Answer: A, B, D Questions: 135 On which Microsoft Windows operating systems can the NetBackup client be installed? (Choose four.)
Page 28 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

A. Microsoft Windows 2003 B. Microsoft Windows XP C. Microsoft Windows Vista D. Microsoft Windows 2000 E. Microsoft Windows NT 4.0 F. Microsoft Windows NT 3.5.1 Answer: A, B, C, D Questions: 136 Which command is used to view NetBackup processes? A. bpps B. bpnos C. bpverify D. bpsl Answer: A Questions: 137 Which of the following are options when configuring a frequency-based policy schedule? (Choose three.) A. Minutes B. Hours C. Days D. Weeks E. Months F. Years Answer: B, C, D Questions: 138 Which commands can be used to verify robot communication? (Choose three.) A. vmchange B. tpautoconfig C. robtest D. scan E. vmglob Answer: A, C, D Questions: 139 Which retention types are available in storage lifecycles? A. Static, variable capacity managed, and try-to-keep B. Fixed, staged capacity managed, and expire after duplication C. Defined, variable capacity managed, and try-to-keep D. Conditional, staged capacity managed, and expire after duplication Answer: B Questions: 140
Page 29 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

What should be done to ensure that the NetBackup environment is recoverable in case of a disaster? (Choose two.) A. Maintain tapes in the scratch pool. B. Maintain NetBackup catalog in sync state. C. Back up the NetBackup catalogs on the master server. D. Back up the EMM database on the EMM server. E. Back up the mediaDB on all media servers. Answer: C, D Questions: 141 How do you define a new storage server? A. Run the Configure Disk Pool wizard from the GUI. B. Run nbdevconfig -creatests from a command line. C. Create a storage unit, which automatically defines the storage server. D. Right-click Storage Servers in the console and select New. Answer: B Questions: 142 You have enabled Multiple Data Streams for a Windows 2003 client policy. Which file list backs up all local volumes C:\, D:\, and E:\ and the Shadow Copy Components using only three streams? A. ALL_LOCAL_DRIVES Shadow Copy Components:\ B. C:\ Shadow Copy Components:\ NEW_STREAM D:\ NEW_STREAM E:\ C. NEW_STREAM ALL_LOCAL_DRIVES NEW_STREAM Shadow Copy Components:\ D. NEW_STREAM C:\ Shadow Copy Components:\ NEW_STREAM D:\ NEW_STREAM E:\ Answer: D Questions: 143 The NetBackup system administrator must create a policy to do a total system backup of the organization's Windows 2003 Servers. Which backup selection should the system administrator use? A. Local_Drives B. Local_Drives and Shadow_Copy_Components C. All_Local_Drives D. All_Local_Drives and Shadow_Copy_Components Answer: C Questions: 144 Which servers can be added to a server group? (Choose three.) A. Master server B. Media server C. EMM server D. NDMP tape server E. NOM server Answer: A, B, D
Page 30 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 145 Which setting affects the maximum number of destinations configurable in a storage lifecycle? A. Host Properties-->Global Attributes-->Maximum backup copies B. Host Properties-->Universal Settings-->Maximum backup copies C. Host Properties-->General Server-->Maximum backup copies D. Host Properties-->Servers-->Maximum backup copies Answer: A Questions: 146 Where in the NetBackup Administration console do you create a disk location for backups? A. Policies B. Storage C. Devices D. Disk Pools Answer: B Questions: 147 A new NetBackup installation has 10,000 tapes in a single library and 27 volume pools. Which NetBackup feature allows automatic assignment of free tapes to any of the 27 pools when the pool runs out of tapes? A. Setting up a scratch pool. B. Setting up volume group for each pool. C. Enabling media multiplexing for each policy. D. Enabling auto-assign media in the Universal Attributes tab. Answer: A Questions: 148 To enable NetBackup LiveUpdate logs, where do you create two directories called patch and liveupdate? A. Install_path\netbackup B. Install_path\liveupdate C. Install_path\netbackup\logs D. Install_path\liveupdate\logs Answer: C Questions: 149 Where is media sharing enabled? (Choose two.) A. In the Server Group configuration B. In the Volume Group configuration C. In the master server host properties under Media D. In the Volume Pool configuration E. In options for each individual media Answer: A, C

Page 31 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Questions: 150 Which types of tapes are barcode rules commonly used to define? (Choose two.) A. Cleaning tapes B. Catalog tapes C. Catstore tapes D. Cartridge tapes E. Scratch tapes Answer: A, E Questions: 151 How do you configure Maximum Partially Full (MPF) of volumes? A. Through storage groups B. Through storage units C. Through volume groups D. Through volume pools Answer: D Questions: 152 Which policy types are used for NetWare server NSS volume backup? (Choose two.) A. Novell B. NetWare C. AFS D. NSS volume E. Standard Answer: B, E Questions: 153 By default, how long is true image restore information kept on disk? A. 12 hours B. 36 hours C. 1 day D. 3 days Answer: C Questions: 154 Which policy attribute must be selected for synthetic backups? A. Collect true image restore B. Collect image restore information C. Collect true image restore information with move detection D. Collect synthetic backup information with move detection Answer: C Questions: 155 Where in the media server host properties would you configure the number of retries for restores?

Page 32 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

A. Universal Settings-->Retry intervals B. General Server-->Restore retries C. Universal Settings-->Restore retries D. General Server-->Restore intervals Answer: C Questions: 156 What is the default media multiplexing level on a policy schedule? A. 0 B. 1 C. 2 D. 99 Answer: B Questions: 157 The NetBackup system administrator has been tasked to configure a policy with multiple tape copies enabled. Where would this be done? A. From the Attributes tab, enable Allow multiple data streams. B. From the Clients tab, add the host name and IP address of the client. C. From the Schedules tab, add a new schedule and enable Multiple copies. D. From the Schedules tab, enable Increase media multiplexing. Answer: C Questions: 158 How do you set up disk spanning to allow backups to span multiple BasicDisk storage units? (Choose two.) A. Select Host Properties-->Media Servers-->Media-->Allow backups to span disks. B. Select Storage Units-->Storage Unit-->Allow backup to span disks. C. Configure a storage unit group and add all disk storage units regardless of media server. D. Configure a storage unit group that consists of only disk storage units defined on a single media server. E. Confirm Round Robin storage unit is selected at the group level. Answer: A, D Questions: 159 The nbj.conf (UNIX) and the setconf.bat (Windows) files define the defaults ports for VNETD and BPJAVA. What is the port number for VNETD? A. 1556 B. 13701 C. 13724 D. 13742 Answer: C Questions: 160 Your NetBackup 6.5 environment has two tape libraries: Library A and Library B. Library A contains SuperDLT tape drives. Library B contains Ultrium tape drives and SuperDLT tape drives.
Page 33 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

What is the minimum number of storage units required to use all tape devices in both tape libraries? A. 1 B. 2 C. 3 D. 4 Answer: Pending Questions: 161 Which statement is true about NetBackup LiveUpdate policies? A. LiveUpdate policies on a Windows master server can be configured to update UNIX clients. B. LiveUpdate policies can include clients at NetBackup version 6.0 or higher. C. LiveUpdate policies are created by specifing a policy type of NBU-Live-Up. D. LiveUpdate policies can be scheduled. Answer: A Questions: 162 Which Global Attributes setting is used to enable more backup jobs to occur concurrently on a client? A. Maximum jobs per client B. Maximum backup copies C. Maximum concurrent jobs D. Schedule backup attempts Answer: A Questions: 163 Which functions can be performed with a tpconfig command? (Choose wo.) A. Add and display disk paths. B. Add and configure robots. C. Display the current media status. D. Display robot and tape drive configuration. E. Display robot status. Answer: B, D Questions: 164 Where would you add an include list for a Windows client in Host Properties? A. Client properties-->Windows clients-->Exclude List Exclude List area B. Client properties-->Windows clients-->Include List Include List area C. Client properties-->Windows clients-->Exclude List Exceptions to the Exclude List area D. Client properties-->Windows clients-->Include List Exceptions to the Exclude List area Answer: C Questions: 165 You are configuring a NetBackup environment where there is only one tape drive available. How many backup streams will be multiplexed if:
Page 34 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

The storage unit multiplex setting is 6 The schedule multiplex setting is 4 Ten backup jobs initiate from that schedule A. 1 B. 4 C. 6 D. 10 Answer: Pending Questions: 166 Which settings must be configured for multiplexing to function? (Choose two.) A. Storage Unit Groups-->Maximum streams per drive B. Storage Unit-->Maximum streams per drive C. Master Server Host Properties-->Global Attributes-->Maximum jobs per client D. Backup Policy-->Schedule-->Media multiplexing E. Volume Pools-->Maximum Multiplexing per volume Answer: B, D Questions: 167 In which areas in the NetBackup Administration console can you find throughput of a backup? (Choose three.) A. Catalog B. Reports C. Device Monitor D. Activity Monitor E. Debug Logs Answer: Pending Questions: 168 Which value would you enter into the SIZE_DATA_BUFFERS file to set your data buffer size to 64 KB? A. 64 B. 64K C. 64000 D. 65536 Answer: D Questions: 169 You are installing a new NetBackup client that must communicate across a firewall to its master/media server. Which NetBackup process helps reduce the number of ports that must be opened in firewall? A. inetd B. bpcd C. vnetd D. bpinetd
Page 35 of 36

Exam Name: Exam Type: Exam Code:

Data Protection Administration for Windows(NBU 6.5) Symantec 250-365 Total Questions:

169

Answer: C

End of Document

Page 36 of 36