Designed for Rugged Excellence

IDS-322
Industrial 2 secure serial port to Ethernet device
server with 2xRS-232/422/485 and
Features 2x10/100Base-T(X)

➢ Operating Modes: Virtual Com, Serial Tunnel, TCP Server,

TCP Client, UDP
➢ Support 2xRS-232/422/485 in DB9 connector
➢ Support Modbus TCP/RTU industrial protocols
➢ Redundant multiple host devices:
5 host devices: Virtual COM, TCP Server, TCP Client mode;
4 IP ranges: UDP
➢ Security: SSL data encryption; secured management by
HTTPS and SSH: IP Access: IP White List
➢ Event Warning by Syslog, Email, SNMP trap, Relay and
Beeper
➢ Configurable by Web-based and Windows utility (DS-Tool)
➢ Various Windows O.S. supported:
Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)
➢ Ethernet switch mode enable Daisy Chain
➢ Support RTC
➢ Support Linux OpenWRT SDK for project

Introduction

IDS-322 is an innovative secure 2 port RS-232/422/485 to 2 ports LAN secure device server with standard features of

device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client,

and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual

Com. On the other hand, IDS-322 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet

connection breakdown or any host PC fails. Further, IDS-322 features HTTPS, SSH, and SSL encryption to assure the

security of critical data transmission.

IDS-322 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to

guarantee a non-stop operation. With wide operating temperature, -40~70oC, and rugged IP-30 housing design, IDS-322

series could operate in the harsh industrial environment. Therefore, IDS-322 is the best solution to the high demand of

secure serial to Ethernet critical data communication.

* All specifications are subject to change without notice.

 Designed for Rugged Excellence

Practical Operation
In practical operation of serial device servers, Windows utility (DS-Tool) is supported. This utility is very helpful for you

to manage and monitor all of industrial device servers on the industrial network.

IDS-322
RS-232/422/485

IDS-322+
RS-232/422/485

Multiple Host PCs SSL Data Encryption

IDS-322
RS-232/422/485

IDS-322
RS-232/422/485

TCP Client/Server Modes

DS-Tool (Windows Utility): Monitoring and Configuration

interface

* All specifications are subject to change without notice.

 Designed for Rugged Excellence

Pin Definition

Pin # RS-485 RS-485

RS-232 RS-422
( 4 wire ) ( 2 wire )
1 DCD TX- TX- DATA -

2 RXD TX+ TX+ DATA +

3 TXD RX+ RX+

DB9 connector 4 DTR RX- RX-

5 GND GND GND

6 DSR

7 RTS

8 CTS

9 RI

Dimension

* All specifications are subject to change without notice.

 Designed for Rugged Excellence

Specifications

ORing Device Server Model IDS-322

Physical Ports

10/100 Base-T(X) Ports in RJ45

2
Auto MDI/MDIX

Serial Ports

Connector DB9 x 2

Operation Mode RS-232/422/485

Serial Baud Rate 110 bps to 460.8 Kbps

Data Bits 7, 8

Parity odd, even, none, mark, space

Stop Bits 1, 1.5, 2

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

Flow Control XON/XOFF, RTS/CTS, DTR/DSR

Network Protocol

Protocol ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP

LED indicators

3 x LEDs, PWR 1(2)(PoE) / Ready:

Power indicator
Green On: Power is on

10/100TX RJ45 port indicator Green for port Link/Act at 100Mbps.

Amber: Serial port is receiving data

Serial TX / RX LEDs:
Green: Serial port is transmitting data

Power

Redundant Input power Dual DC inputs. 12-48VDC on 6-pin terminal block

Power consumption (Typ.) 3.84W

Overload current protection Present

Reverse polarity protection Present on terminal block

Physical Characteristic

Enclosure IP-30

Dimension (W x D x H) 45 (W) x 81 (D) x 95 (H) mm

Weight (g) 316g

Environmental

Storage Temperature -40 to 85oC (-40 to 185oF)

Operating Temperature -40 to 70oC (-40 to 158oF)

Operating Humidity 5% to 95% Non-condensing

Regulatory approvals

EMI FCC Part 15, CISPR (EN55022) class A

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EMS
EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27

Free Fall IEC60068-2-32

Vibration IEC60068-2-6

Safety EN60950-1

Warranty 5 years

* All specifications are subject to change without notice.

 Designed for Rugged Excellence

Packing List
O
⚫ IDS-322 x 1 ⚫ CD x 1 ⚫ Quick Installation Guide x 1

⚫ Wall-Mount Kit x 1 ⚫ Din-Rail Kit x 1

Optional Accessories
O
⚫ DR-45 series : 45 Watts power supply ⚫ DR-75 series : 75 Watts power supply

⚫ DR-120 series : 120 Watts power supply

* All specifications are subject to change without notice.