DICOM Conformance Statement
DICOM Conformance Statement
Endodigi V1.1
Revision History
V1.1 Page 2
Table of Contents
V1.1 Page 3
Definitions, Terms and Abbreviations:
Definitions, terms and abbreviations used in this document are defined within the different
parts of the DICOM standard. Abbreviations and terms are as follows:
V1.1 Page 4
CONFORMANCE STATEMENT OVERVIEW
The DICOM module for Endodigi Software allow that Endodigi Software act like “Acquisition
Modality” in the use area.
Worklist License: Allow realice a query to SCP about Modality Workilist, is included the
Export file license too.
Query Modality Worklist: Based on a query entered at the Acquisition Modality, a modality
worklist is generated listing all the ítems that satisfacy the query, this list of Schedule
Procedure Steps with selected demographic information is returned to the acquisition
Modality
V1.1 Page 5
INTRODUCTION
AUDIENCE
This document is intended for hospital staff health system integrators, software designers and
implementers. It is assumed that the reader has a working understanding of DICOM.
REMARKS
DICOM, by itself does not guarantee interoperability. However, the Confiormace Stament
facilitates first-level validation for interoperability between different application supporting
the same DICOM functionality. This Conformace Statement is not intended to replace
validation with other DICOM equipment to ensure proper exchange of information intended.
The scope of this Conformance Statement is to facilate communication with the Endodigi
Software System and other vendors medical equipement. The conformace Statement should
be read and unsderstand in conjunction with the DICOM standard [DICOM]. However, by itself
it is not guaranteed to ensure the desired interoperability and a successful interconnectivity.
The use should be aware of the following important issues:
The comparision of different conformance statement is the first step towards
assessing interconnectivity between Endodigi Capture Software y otros.
Test procedures should be defined to validate the desired level of connectivity
The DICOM standard will evolve to meet the user’s future requeriments. ENDODIGI capture
software reserves the right to make changes to its products or to discontinue its delivery.
V1.1 Page 6
NETWORKING
IMPLEMENTION MODEL
Application Data Flow
The DICOM module of ENdodigi Software can realize the query worklist as SCU and the verification
ECHO SCP/SCU
Echo verification: In SCU it is done from the configuration screen by pressing the Test button.
Starts the C-ECHO command process, then waits for the response. The result of this command
will be reported with a message on the screen. In SCP the module responds successfully to the
received Echo message.
Worklist SCU: enables scheduled workflow where the patient and case information parameters
are retrieved from a Worklist Server. The Worklist SCU performs searches using a Modality
Worklist Query.
FUNCTIONAL DEFINITIONS OF AE
The DICOM module of endodigi software applied when the Endodigi Software is initialized and
the activation process using a license was finalized properly. The endodigi software will be able
to show and enable in a graphical interface the features available according to the module
license purchased.
V1.1 Page 7
Association Establishment Policies
General Association Policies
The DICOM application Context Name (ACN)
Application Context Name 1.2.840.10008.3.1.1.1
The Maximum Length PDU negotiation is included in all associations establishment request. The
maximum length PDU for an association initiated by Endodigi Dicom software (not configurable) is:
Maximum Length PDU 16384
Number of Associations
Initialize one at time. Not allow multiple associations at same time.
Asynchronus Nature
The module work over one synchronous association.
Implementation Identifying Information
Implementation UID 1.3.6.1.4.1.30071.6
SOP Classes:
The Dicom module of Endodigi software prove Standard conformance to the following SOP Classes:
SOP Class Name SOP Class UID SCU SCP
Modality worklist information Model – 1.2.840.10008.5.1.4.31 Yes no
FIND
Association Policies
See General Asociation Policies
Association initiation Policiy
The Dicom module of Endodigi software attempts to initiate a new association for the following service
operation:
Query Modality Worklist
Associated Real-world activity- Query worklist of a remote AE
If the user enter to Database, the query to the AE is initalized.
V1.1 Page 8
SOP Presentation Context Table – Query worklist of remote AE
Presentation Context Table
Abstract Syntax Transfer Syntax Role Extended
Name UID Name UID Negotiation
Modality 1.2.840.10008.5.1.4.31 ImplicitVRLittleEndian 1.2.840.10008.1.2 SCU NONE
Worklist
information
Model -
FIND
V1.1 Page 9
Scheduled Procedure (0040, 0002) Return value
Start Date
Scheduled Procedure (0040, 0003) Return value
Start Time
Scheduled Procedure (0040, 0007) Return value
Step Description
Scheduled Procedure (0040, 0009) Return value
Step ID
Scheduled Procedure (0040, 0011) Return value
Step Location
Scheduled Station AE (0040, 0001) Return value
Title
Scheduled Station (0040, 0010) Return value
Name
SOP Classes:
Endodigi Dicom extension prove Standard conformance to the following SOP Classes:
SOP Class Name SOP Class UID SCU SCP
Verification SOP Class 1.2.840.10008.1.1 Yes Yes
Association Policies
See General Asociation Policies
Association initiation Policiy
Endodigi Dicom Extension Verification SCU initates an association when user click on Test button in the
configuration screen.
Associated Real-world activity- Echo Opeartion
V1.1 Page 10
SOP Specific Conformance Statement for Verification SOP Class
The following table summarizes the behavior in response to command statuses:
Service Status Further Meaning Error Code Behavior
Success Success 0000H Show indicator
Other Failure Any other status Show indicator
V1.1 Page 11
MEDIA STORAGE CONFORMACE STATEMENT
IMPLEMENTATION MODEL
This section of the DICOM conformace statement specifies the Endodigi Software compliance
to DICOM requeriments for media exportation. It is details the DICOM Media Storage
Application and roles that are supported by this product.
Endodigi Software is able to export images and report to DICOM media.
The Dicom module of Endodigi software can create a file with DICOM Format on the folder
path setting over determinated media disk(USB disk, Local Disk, networkdisk). The default
value location can be changed setting the path from Dicom Configuration screen.
AE Specifications
The DICOM module will create a file using the path setting on Endodigi software
The DICOM file created will have the .dcm extension, not customizable
The following Red marks show the button to realize the action Export.
You can export the images to DICOM format using the contextual export button or add by
dragging the images to the export button. When the selection is complete press the Export
button.
In the case of wanting to export the report to DICOM format, you can press the Export report
button
V1.1 Page 12
From Menu Export ovear each image
File Information
V1.1 Page 13
Image attributes
Name Tag Source Comment
Series Instance UID (0020,000E) Generated
ImageComments (0020,4000) Image comment
Series Date (0008,0021) Date creation File
Report attributes
Name Tag Source Comment
Series Instance UID (0020,000E) Generated
Series Number (0020,0011) Number of page
Series Date (0008,0021) Date creation File All page have the
same date
V1.1 Page 14