Conforms to USDOL OSHA 29CFR 1910.

1200 HAZCOM

SAFETY DATA SHEET

Lysol Clean & Fresh Multi Surface Cleaner, All Scents

1. Product and company identification

Product name : Lysol Clean & Fresh Multi Surface Cleaner, All Scents
Distributed by : Reckitt Benckiser LLC.
Morris Corporate Center IV
399 Interpace Parkway (P.O. Box 225)
Parsippany, New Jersey 07054-0225
+1 973 404 2600

Emergency telephone : 1-800-338-6167

number (Medical)
Emergency telephone : 1-800-424-9300 (U.S. & Canada) CHEMTREC
number (Transport) Outside U.S. and Canada (North America), call Chemtrec:703-527-3887
Website: : http://www.rbnainfo.com

Product use : Multipurpose Cleaner

This SDS is designed for workplace employees, emergency personnel and for other conditions and situations
where there is greater potential for large-scale or prolonged exposure, in accordance with the requirements of
USDOL Occupational Safety and Health Administration.

This SDS is not applicable for consumer use of our products. For consumer use, all precautionary and first aid
language is provided on the product label in accordance with the applicable government regulations, and shown
in Section 15 of this SDS.

SDS # : D0020043 v2.0

Formulation #: : 2018-074 / 2028-064 (8092580 v1.0) Cherry Blossom & Pomegranate/Peony Blossom &
White Peach
1876-183B / 2028-060 (8056699 v2.0) Lemon Sunflower
1876-180C / 2028-061 (8056710 v2.0) Tangerine Mango/Hawaii Sunset Essence
1876-181 / 2028-062 (8056716 v1.0) Waterfall Splash/Mountain Fresh & Aqua Essence
1876-180A / 2028-063 (8056727 v1.0) Lavender Orchid
EPA ID No. : 777-89
UPC Code / Sizes : 10.75 oz, 28 oz, 40 oz, 48 oz, 52 oz, 96 oz and 144 oz PET and HDPE Bottles.

2. Hazards identification
Classification of the : SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2B
substance or mixture

GHS label elements

Hazard pictograms : Not applicable.
Signal word : Warning
Hazard statements : Causes eye irritation.
Precautionary statements

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 1/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

2. Hazards identification
General : Keep out of reach of children. If medical advice is needed, have product container or
label at hand.
Prevention : Wear eye or face protection. Wash hands thoroughly after handling.
Response : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.
Storage : Not applicable.
Disposal : Not applicable.
Supplemental label : None known.
elements
Hazards not otherwise : None known.
classified

3. Composition/information on ingredients
Substance/mixture : Mixture
Ingredient name % CAS number
Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides 1 - 2.5 68424-85-1
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.

4. First aid measures

Description of necessary first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. If irritation persists, get medical attention.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial
respiration or oxygen by trained personnel. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects
persist or are severe. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a collar,
tie, belt or waistband.
Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean
shoes thoroughly before reuse.
Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. If material has been swallowed and
the exposed person is conscious, give small quantities of water to drink. Stop if the
exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should be
kept low so that vomit does not enter the lungs. Get medical attention if adverse health
effects persist or are severe. Never give anything by mouth to an unconscious person.
If unconscious, place in recovery position and get medical attention immediately.
Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : Causes eye irritation.
Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 2/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

4. First aid measures

Inhalation : No known significant effects or critical hazards.
Skin contact : No known significant effects or critical hazards.
Ingestion : May be irritating to mouth, throat and stomach.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
irritation
watering
redness
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may
be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

See toxicological information (Section 11)

5. Fire-fighting measures
Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media

Specific hazards arising : In a fire or if heated, a pressure increase will occur and the container may burst.
from the chemical
Hazardous thermal : No specific data.
decomposition products

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.

6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 3/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

6. Accidental release measures

For emergency responders : If specialised clothing is required to deal with the spillage, take note of any information
in Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash
spillages into an effluent treatment plant or proceed as follows. Contain and collect
spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to local regulations
(see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated
absorbent material may pose the same hazard as the spilled product. Note: see
Section 1 for emergency contact information and Section 13 for waste disposal.

7. Handling and storage

Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid
contact with eyes, skin and clothing. Avoid breathing vapor or mist. Keep in the original
container or an approved alternative made from a compatible material, kept tightly
closed when not in use. Empty containers retain product residue and can be hazardous.
Do not reuse container.

Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected from
including any direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
incompatibilities (see Section 10) and food and drink. Keep container tightly closed and sealed until
ready for use. Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination.

8. Exposure controls/personal protection

Control
Occupational exposure limits
Not applicable.
Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Individual protection measures

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 4/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

8. Exposure controls/personal protection

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: chemical splash goggles.
Skin protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Body protection : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respiratory protection : Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.

9. Physical and chemical properties

Appearance
Physical state : Liquid. [Transparent]
Color : Violet.
Green. Yellow.
Orange.
Blue.
Dark purple.

Odor : Characteristic.
Odor threshold : Not available.
pH : 8.5 to 9.5 [Conc. (% w/w): 100%]
Melting point : Not available.
Boiling point : Not available.
Flash point : Closed cup: >93.3°C (>199.9°F)
Evaporation rate : Not available.
Flammability (solid, gas) : Not available.
Lower and upper explosive : Not available.
(flammable) limits
Vapor pressure : Not available.
Vapor density : Not available.
Relative density : 1.002 to 1.012 g/cm³ [25°C]
Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 5/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

9. Physical and chemical properties

Solubility : Easily soluble in the following materials: cold water and hot water.
Partition coefficient: n- : Not available.
octanol/water
Auto-ignition temperature : Not available.
Decomposition temperature : Not available.
Viscosity : Not available.

10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.
Chemical stability : The product is stable.
Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions
Conditions to avoid : No specific data.
Incompatible materials : No specific data.
Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products should
products not be produced.

11. Toxicological information

Information on toxicological effects
Acute toxicity
Product/ingredient name Result Species Dose Exposure
Quaternary ammonium LD50 Oral Rat 344 mg/kg -
compounds, benzyl-
C12-16-alkyldimethyl,
chlorides
*Lysol Clean & Fresh Multi LC50 Inhalation Vapor Rat >2.2 mg/l 14 days
Surface Cleaner, All Scents
Conclusion/Summary : Not classified Harmful *Information is based on toxicity test result of a similar product.

Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
Quaternary ammonium Skin - Severe irritant Rabbit - 25 milligrams -
compounds, benzyl-
C12-16-alkyldimethyl,
chlorides
*Lysol Clean & Fresh Multi Eyes - Cornea opacity Rat 2 72 hours 7 days
Surface Cleaner, All Scents
Skin - Primary dermal Rat 0.8 - -
irritation index (PDII)
Conclusion/Summary
Skin : Slightly irritating to the skin. *Information is based on toxicity test result of a similar
product.
Eyes : Moderately irritating to eyes. *Information is based on toxicity test result of a similar
product.
Sensitization

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 6/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

11. Toxicological information

Product/ingredient name Route of Species Result
exposure
*Lysol Clean & Fresh Multi skin Guinea pig Not sensitizing
Surface Cleaner, All Scents
Conclusion/Summary
Skin : Non-sensitizer to skin. *Information is based on toxicity test result of a similar product.
Mutagenicity
Not available.
Carcinogenicity
Not available.
Reproductive toxicity
Not available.
Teratogenicity
Not available.

Specific target organ toxicity (single exposure)

Not available.

Specific target organ toxicity (repeated exposure)

Not available.

Aspiration hazard
Not available.

Information on the likely : Not available.

routes of exposure
Potential acute health effects
Eye contact : Causes eye irritation.
Inhalation : No known significant effects or critical hazards.
Skin contact : No known significant effects or critical hazards.
Ingestion : May be irritating to mouth, throat and stomach.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : Adverse symptoms may include the following:
irritation
watering
redness
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.

Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 7/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

11. Toxicological information

Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
General : No known significant effects or critical hazards.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.

Numerical measures of toxicity

Acute toxicity estimates
Not available.

12. Ecological information

Toxicity
Product/ingredient name Result Species Exposure
Quaternary ammonium Acute EC50 0.016 mg/l Daphnia 48 hours
compounds, benzyl-
C12-16-alkyldimethyl,
chlorides
Acute LC50 64 ppb Fresh water Fish - Oncorhynchus mykiss 96 hours
Chronic EC10 0.009 mg/l Algae 72 hours

Persistence and degradability

Product/ingredient name Aquatic half-life Photolysis Biodegradability
Quaternary ammonium - - Readily
compounds, benzyl-
C12-16-alkyldimethyl,
chlorides

Bioaccumulative potential
Not available.

Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 8/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

12. Ecological information

Other adverse effects : No known significant effects or critical hazards.

13. Disposal considerations

Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.

14. Transport information

Not a DOT controlled material (United States). Not a TDG-controlled material. This preparation is not classified as
dangerous according to international transport regulations (ADR/RID, IMDG or ICAO/IATA).

15. Regulatory information

U.S. Federal regulations : TSCA 4(a) proposed test rules: Quaternary ammonium compounds, benzyl-
C12-16-alkyldimethyl, chlorides
TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): Not determined.
Clean Water Act (CWA) 311: sodium hydroxide; ammonia, anhydrous; pentasodium
triphosphate

Clean Air Act Section 112 : Not listed

(b) Hazardous Air
Pollutants (HAPs)
Clean Air Act Section 602 : Not listed
Class I Substances
Clean Air Act Section 602 : Not listed
Class II Substances
DEA List I Chemicals : Not listed
(Precursor Chemicals)
DEA List II Chemicals : Not listed
(Essential Chemicals)
SARA 302/304
Composition/information on ingredients

SARA 302 TPQ SARA 304 RQ

Name % EHS (lbs) (gallons) (lbs) (gallons)
Ammonia < 0.01 Yes. 500 - 100 -

SARA 304 RQ : 1000000000 lbs / 454000000 kg [119100408.7 gal / 450844091.4 L]

SARA 311/312
Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 9/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

15. Regulatory information

Classification : Immediate (acute) health hazard
Composition/information on ingredients
Name % Fire Sudden Reactive Immediate Delayed
hazard release of (acute) (chronic)
pressure health health
hazard hazard
Quaternary ammonium compounds, 1 - 2.5 No. No. No. Yes. No.
benzyl-C12-16-alkyldimethyl, chlorides

State regulations
Massachusetts : None of the components are listed.
New York : None of the components are listed.
New Jersey : The following components are listed: ETHYL ALCOHOL; ALCOHOL
Pennsylvania : The following components are listed: DENATURED ALCOHOL

Label elements
Signal word: : CAUTION
Hazard statements : Moderately irritating to eyes.
Precautionary measures : Keep out of reach of children.
Avoid contact with eyes, skin and clothing.
Avoid breathing dust/fume/gas/mist/vapors/spray.

16. Other information

Hazardous Material :
Information System (U.S.A.)
Health 2

Flammability 0
Physical hazards 0

Personal protection B

Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
National Fire Protection :
Association (U.S.A.)

0 Flammability
Health 2 0 Instability/Reactivity
Special

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 10/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

D0020043 v2.0

16. Other information

Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not
the complete and official position of the National Fire Protection Association, on the referenced subject which is
represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be
interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA
49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not,
anyone using the 704 systems to classify chemicals does so at their own risk.
Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations

Date of issue : 09/12/2014.

Date of previous issue : 17/10/2012
Version : 2
Prepared by : Reckitt Benckiser LLC.
Product Safety Department
1 Philips Parkway
Montvale, New Jersey 07646-1810 USA.
FAX: 201-476-7770

Revision comments : Update of SDS as per US GHS.

Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.

RB is a member of the CSPA Product Care Product Stewardship Program.

Code # : D0020043 v2.0 SDS # : D0020043 v2.0 Date of issue : 09/12/2014. 11/11
8092580_1_8056699_2_8056710_2_8056716_1_8056727_1