Altech UL489

UL 489

Busbar System
UL489 recognized
E305318

UL489 Listed Busbars

UL 508

The Altech Busbar System is an

innovative way to jumper up to 57
poles of Miniature Molded Case
Circuit Breakers.

The advantages of this busbar

system are:
UL 1077

• 30% Installation time savings

• Panel space savings
• Reduced maintenance
• High electrical ratings
Universal UL489 Busbar
fits most UL489 Miniature
Equipment Breakers

Circuit Breakers in the market!

UL 1077

Please contact Altech for details and further information.

UL489 Busbar System

• Every pin configuration is possible by combination of existing 6, 12 and 18 pin busbars.
• Power Feeding:
Power Feed Lug (115A), Direct Power Feed (115A)
• UL listed for Altech’s L-Series and ABL’s UL-Series of Miniature Circuit Breakers
Earth Leakage
Circuit Breakers

• UL listed for use with most popular UL489 Miniature Circuit Breakers in the market.

Technical Specifications Busbars UL489

Material of Busbar Copper
Material of Insulation (Housing) Polyamide
Electrical Ratings 115A/600V AC/DC
Short Circuit Withstand Rating 10kA
Applying Standards UL489, VDE0660 Part 100,
ANNEX

IEC60749, DIN EN60947-1

28 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Altech UL489 Busbar System

UL 489
Power Feed Methods

End Feed Method

P35ULT

UL 508
With the P35ULT Power Feed Lug as a Start/End Feeding Device a maximum input current of 115A per
Phase can be achieved.

115A per phase

1 2 3
(P35ULT)

UL 1077
115A
115A
115A

Equipment Breakers
UL 1077
P50ULB

With the P50ULB Modular Direct Power Feed as a Start/End Feeding Device a maximum input current of
115A per Phase can be achieved.

115A
115A

Earth Leakage
Circuit Breakers
115A

(P50ULB)
1 2 3
115A per phase
ANNEX

* For complete specifications and description of Feeding Devices see page 33.

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 29

 1 PHASE BUSBAR 16mm 2
for 115A
UL 489

99 mm (3.90 in.) 15.5 mm

UL489 recognized (0.61 in.)

(1.38 in.)
35 mm
E305318

5 mm (0.20 in.) 1.5 mm

13.5mm
(0.53 in.)
Type/ No. of Length 17.6 mm (0.69 in.) (0.06 in.)
Cat. No. Pins [mm] 17 x 17.6 = 88 mm max. 1.5 mm
(3.46 in.) (0.06 in.)
1P16UL3/6 6 99
UL 508

204.6 mm (8.06 in.) 15.5 mm

(0.61 in.)

(1.38 in.)
35 mm
UL489 recognized
E305318

5 mm (0.20 in.) 1.5 mm

13.5mm
(0.53 in.)
17.6 mm (0.69 in.) (0.06 in.)
Type/ No. of Length 17 x 17.6 = 193.6 mm max. 1.5 mm
(0.06 in.)
UL 1077

Cat. No. Pins [mm] (7.62 in.)

1P16UL3/12 12 204.6

15.5 mm

(1.38 in.)
35 mm
310.2 (12.21 in.) (0.61 in.)
UL489 recognized
Equipment Breakers

E305318

5 mm (0.20 in.) 1.5 mm

UL 1077

17.6 mm (0.69 in.) (0.06 in.)

13.5mm
(0.53 in.)
17 x 17.6 = 299.2 max. 1.5 mm
Type/ No. of Length (11.78 in.) (0.06 in.)
Cat. No. Pins [mm]

1P16UL3/18 18 310.2
Example for different No. of Pins
eg. 44 pins use 1x 1P16UL3/12 + 2x 1P16UL3/18

Busbars backwards
to one another
Earth Leakage

/18
1P16UL3
Circuit Breakers

/12
1P16UL3

/18
1P16UL3

overlapping

• No. of overlapping pins of 2 busbars must be a multiplier of the No. of phases

• Overlapping busbars are backwards to each other

ACCESSORIES
ANNEX

Type/Cat. No: P35ULT P50ULB BRUL (3 per strip)

Description: Power Feed Lug Modular Direct Power Feed Insulation Cap

30 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

2 PHASE BUSBAR 16mm 2
for 115A

UL 489
99 mm (3.90 in.) 15.5 mm
UL489 recognized (0.61 in.)

(1.38 in.)
E305318

35 mm
5 mm (0.20 in.) 1.5 mm

13.5mm
(0.53 in.)
Type/ No. of Length 17.6 mm (0.69 in.) (0.06 in.)
Cat. No. Pins [mm] 17 x 17.6 = 88 mm max. 1.5 mm
(3.46 in.) (0.06 in.)
2P16UL3/6 6 99

UL 508
204.6 mm (8.06 in.) 15.5 mm
(0.61 in.)

(1.38 in.)
35 mm
UL489 recognized
E305318

5 mm (0.20 in.) 1.5 mm

13.5mm
(0.53 in.)
17.6 mm (0.69 in.) (0.06 in.)
Type/ No. of Length 17 x 17.6 = 193.6 mm max. 1.5 mm
(0.06 in.)

UL 1077
Cat. No. Pins [mm] (7.62 in.)

2P16UL3/12 12 204.6

15.5 mm

(1.38 in.)
35 mm
310.2 (12.21 in.) (0.61 in.)
UL489 recognized

Equipment Breakers
E305318

5 mm (0.20 in.) 1.5 mm

UL 1077
17.6 mm (0.69 in.) (0.06 in.)

13.5mm
(0.53 in.)
17 x 17.6 = 299.2 max. 1.5 mm
Type/ No. of Length (11.78 in.) (0.06 in.)
Cat. No. Pins [mm]

2P16UL3/18 18 310.2
Example for different No. of Pins
eg. 30 pins use 3x 2P16UL3/12

Busbars backwards
to one another

Earth Leakage
/12
2P16UL3

Circuit Breakers
/12
2P16UL3

/12
2P16UL3

overlapping

• No. of overlapping pins of 2 busbars must be multiplier of the No. of phases

• Overlapping busbars are backwards to each other

ACCESSORIES
ANNEX

Type/Cat. No: P35ULT P50ULB BRUL (3 per strip)

Description: Power Feed Lug Modular Direct Power Feed Insulation Cap

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 31

 3 PHASE BUSBAR 16mm 2
for 115A
UL 489

UL489 listed 99 mm (3.90 in.) 15.5 mm

E305318 (0.61 in.)

(1.38 in.)
35 mm
5 mm (0.20 in.) 1.5 mm

13.5mm
(0.53 in.)
Type/ No. of Length 17.6 mm (0.69 in.) (0.06 in.)
Cat. No. Pins [mm] 17 x 17.6 = 88 mm max. 1.5 mm
(3.46 in.) (0.06 in.)
3P16UL3/6 6 99
UL 508

204.6 mm (8.06 in.) 15.5 mm

(0.61 in.)

(1.38 in.)
35 mm
UL489 listed
E305318

5 mm (0.20 in.) 1.5 mm

13.5mm
(0.53 in.)
17.6 mm (0.69 in.) (0.06 in.)
Type/ No. of Length 17 x 17.6 = 193.6 mm max. 1.5 mm
UL 1077

Cat. No. Pins [mm] (7.62 in.) (0.06 in.)

3P16UL3/12 12 204.6

15.5 mm

(1.38 in.)
35 mm
310.2 (12.21 in.) (0.61 in.)
UL489 listed
Equipment Breakers

E305318

5 mm (0.20 in.) 1.5 mm

UL 1077

17.6 mm (0.69 in.) (0.06 in.)

13.5mm
(0.53 in.)
17 x 17.6 = 299.2 max. 1.5 mm
Type/ No. of Length (11.78 in.) (0.06 in.)
Cat. No. Pins [mm]

3P16UL3/18 18 310.2
Example for different No. of Pins
eg. 39 pins use 1x 3P16UL3/12 + 2x 3P16UL3/18

Busbars backwards
to one another
Earth Leakage
Circuit Breakers

/18
3P16UL3
/12 3P16UL3
8
3P
3 16UL3/1

overlapping

• No. of overlapping pins of 2 busbars must be multiplier of the No. of phases

• Overlapping busbars are backwards to each other

ACCESSORIES
ANNEX

Type/Cat. No: P35ULT P50ULB BRUL (3 per strip)

Description: Power Feed Lug Modular Direct Power Feed Insulation Cap

32 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Power Feed Devices Power Feed Lug Modular Direct Power Feed

UL 489
Easy connection of power supply
wires to the busbar/MCB. Power
Feed Devices ensure permanent
connection. UL489 listed UL489 listed
E305318 E305318

Type/Cat. No. P35ULT P50ULB

Electrical Ratings 115A/600V AC/DC 115A/600V AC/DC
Wire Range 14-2 AWG Cu 14-1 AWG Cu

UL 508
Wire Temperature Rating 75°C 75°C
Required Torque Cable 3.5Nm/31 lb. in. (14-6AWG)
4Nm (35.4 lb. in.) Side 4Nm/35.4 lb. in. (4-1AWG)
Busbar
Side 2.5Nm/22 lb. in.
Material of Lug Brass Brass
Insulation Material Polyamide Polyamide
For use with UL489 1, 2, 3 phase Busbar UL489 1, 2, 3 phase Busbar

Dimensions 11 mm
(0.43 in.)

Ø13.5 mm

UL 1077
(0.53 in.)
(0.49 in.)
12.4 mm
(0.85 in.)
21.6 mm

17.75 mm
(0.70 in.)
16.2 mm (0.64 in.) 31.3 mm (1.23 in.)
31.2 mm (0.00 in.)
74.2 mm (2.92 in.)

Equipment Breakers
(0.16 in.)

(0.69 in.)
17.6 mm
4 mm
48.5 mm (1.91 in.)

(0.63 in.)
16.1 mm

UL 1077
6 mm
51.36 mm (20.22 in.) (0.24 in.)
12.6 mm
(0.50 in.)
6 mm (0.24 in.) 3 mm (0.12 in.)

Assembly Instructions
3P16UL3/12 + 3 x P35ULT 3P16UL3/12 + 3 x P50ULB

Earth Leakage
Circuit Breakers

Accessories Insulation Caps

ANNEX

Type/Cat. No: BRUL (3 per strip)

Description: Insulation Cap

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 33

 Altech UL489 Busbar Systems
UL 489

Configuration and Assembly of UL489 Busbars

UL489 Busbars are available in 3 different Pin Configurations per Phase, (6, 12 and 18 Pins).

The UL489 busbar cannot be cut, since the creepage and clearance distance requirements from UL are too
stringent. Therefore, to obtain the desired No. of Pins, Busbar-Pins can be overlapped as explained below:
1) Busbars are overlapped backwards to each other. Both Pins of each Busbar fit together
in the terminals of the Miniature Circuit Breaker.
2 The Number of overlapping Pins of 2 Busbar must be a multiplier of the Number of
UL 508

Phases to keep existing Phase sequence. (Can be overlapped by more than the number
of phases).
3) Any available combination of the 3 different Pin configurations is possible.
4) In most cases there is more than 1 combination possible.
5) For more possible configurations see Busbar Selection Table on page 21.

Configuration Examples*
16 Pins: 3 x 1P16UL3/6

3/6
3/6 1P16UL
1P16UL
UL 1077

3/6
1P16UL

1 Phase
29 Pins: 1 x 1P16UL3/12 + 1 x 1P16UL3/18

3/12
1P16UL

3/18
1P16UL
Equipment Breakers
UL 1077

22 Pins: 2 x 2P16UL3/12

3/12
2P16UL

3/12
2P16UL

2 Phase
36 Pins: 2 x 2P16UL3/12 + 1 x 2P16UL3/18

3/12
3/12 2P16UL
2P16UL

3/18
Earth Leakage

2P16UL
Circuit Breakers

27 Pins: 1 x 3P16UL3/12 + 1 x 3P16UL3/18

3/12
3P16UL
3/18
3P16UL

3 Phase
39 Pins: 1 x 3P16UL3/12 + 2 x 3P16UL3/18

3/12 3/18
3P16UL 3P16UL
ANNEX

3/18
3P16UL

*For Questions, other configurations and detailed information please contact Altech Corp.

34 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Busbar Selection Table
No. of Necessary No. of Necessary No. of Necessary No. of Necessary
Pins Busbars Pins Busbars Pins Busbars Pins Busbars

UL 489
1 Phase System 27 2x 1P16UL3/18 43 1x 1P16UL3/12 + 2x 1P16UL3/18 38 1x 2P16UL3/6 + 2x 2P16UL3/18
6 1x 1P16UL3/6 1x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/18 3x 2P16UL3/18
7 2x 1P16UL3/6 2x 1P16UL3/6 + 1x 1P16UL3/18 44 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18
8 2x 1P16UL3/6 3x 1P16UL3/12 3x 1P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18
9 2x 1P16UL3/6 28 2x 1P16UL3/18 45 1x 1P16UL3/12 + 2x 1P16UL3/18 40 3x 2P16UL3/18
10 2x 1P16UL3/6 1x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18
11 2x 1P16UL3/6 2x 1P16UL3/6 + 1x 1P16UL3/18 46 1x 1P16UL3/12 + 2x 1P16UL3/18 42 3x 2P16UL3/18
12 1x 1P16UL3/12 3x 1P16UL3/12 3x 1P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18
3x 1P16UL3/6 29 2x 1P16UL3/18 47 3x 1P16UL3/18 44 3x 2P16UL3/18
13 2x 1P16UL3/12 1x 1P16UL3/12 + 1x 1P16UL3/18 48 3x 1P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18
3x 1P16UL3/6 3x 1P16UL3/12 49 3x 1P16UL3/18 46 3x 2P16UL3/18
1x 1P16UL3/6 + 1x 1P16UL3/12 30 2x 1P16UL3/18 50 3x 1P16UL3/18 48 3x 2P16UL3/18

UL 508
14 2x 1P16UL3/12 3x 1P16UL3/12 51 3x 1P16UL3/18 50 3x 2P16UL3/18
3x 1P16UL3/6 1x 1P16UL3/6 + 1x 1P16UL3/12 52 3x 1P16UL3/18
1x 1P16UL3/6 + 1x 1P16UL3/12 + 1x 1P16UL3/18 3 Phase System
15 2x 1P16UL3/12 2x 1P16UL3/12 + 1x 1P16UL3/18 2 Phase System 9 2x 3P16UL3/6
3x 1P16UL3/6 1x 1P16UL3/12 + 2x 1P16UL3/18 6 1x 2P16UL3/6 12 1x 3P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12 31 2x 1P16UL3/18 8 2x 2P16UL3/6 3x 3P16UL3/6
16 2x 1P16UL3/12 3x 1P16UL3/12 10 2x 2P16UL3/6 15 1x 3P16UL3/6 + 1x 3P16UL3/12
3x 1P16UL3/6 1x 1P16UL3/6 + 1x 1P16UL3/12 12 3x 2P16UL3/6 2x 3P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/12 + 1x 1P16UL3/18 1x 2P16UL3/12 18 1x 3P16UL3/18
17 2x 1P16UL3/12 2x 1P16UL3/12 + 1x 1P16UL3/18 14 3x 2P16UL3/6 1x 3P16UL3/12 + 2x 3P16UL3/6
1x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/12 2x 3P16UL3/12
18 1x 1P16UL3/18 32 2x 1P16UL3/18 1x 2P16UL3/6 + 1x 2P16UL3/12 21 2x 3P16UL3/12
2x 1P16UL3/12 3x 1P16UL3/12 16 2x 2P16UL3/12 1x 3P16UL3/6 + 1x 3P16UL3/18

UL 1077
2x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/6 + 1x 1P16UL3/12 1x 2P16UL3/6 + 1x 2P16UL3/12 1x 3P16UL3/12 + 1x 3P16UL3/18
1x 1P16UL3/6 + 2x 1P16UL3/12 + 1x 1P16UL3/18 18 1x 2P16UL3/18 2x 3P16UL3/18
19 2x 1P16UL3/12 2x 1P16UL3/12 + 1x 1P16UL3/18 2x 2P16UL3/12 24 1x 3P16UL3/12 + 1x 3P16UL3/18
2x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/6 + 1x 2P16UL3/12 2x 3P16UL3/6 + 1x 3P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/12 33 2x 1P16UL3/18 20 2x 2P16UL3/6 + 1x 2P16UL3/12 1x 3P16UL3/6 + 2x 3P16UL3/12
1x 1P16UL3/6 + 2x 1P16UL3/12 3x 1P16UL3/12 1x 2P16UL3/6 + 1x 2P16UL3/18 3x 3P16UL3/12
1x 1P16UL3/6 + 1x 1P16UL3/18 1x 1P16UL3/6 + 1x 1P16UL3/12 2x 2P16UL3/12 2x 3P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18 + 1x 1P16UL3/18 2x 2P16UL3/18 27 1x 3P16UL3/12 + 1x 3P16UL3/18
20 2x 1P16UL3/12 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 2x 3P16UL3/18
2x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 22 2x 2P16UL3/12 3x 3P16UL3/12

Equipment Breakers
1x 1P16UL3/6 + 2x 1P16UL3/12 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/18 30 2x 3P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/12 34 2x 1P16UL3/18 1x 2P16UL3/6 + 1x 2P16UL3/18 2x 3P16UL3/12 + 1x 3P16UL3/18

UL 1077
1x 1P16UL3/6 + 1x 1P16UL3/18 3x 1P16UL3/12 1x 2P16UL3/12 + 1x 2P16UL3/18 3x 3P16UL3/12
1x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/6 + 1x 1P16UL3/12 24 2x 2P16UL3/6 + 1x 2P16UL3/18 1x 3P16UL3/6 + 1x 3P16UL3/12
21 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 2P16UL3/6 + 2x 2P16UL3/12 + 1x 3P16UL3/18
2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 3x 2P16UL3/12 33 2x 3P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/12 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/18 2x 3P16UL3/12 + 1x 3P16UL3/18
1x 1P16UL3/6 + 2x 1P16UL3/12 35 2x 1P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 36 1x 3P16UL3/6 + 2x 3P16UL3/18
1x 1P16UL3/6 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 26 2x 2P16UL3/6 + 1x 2P16UL3/18 2x 3P16UL3/12 + 1x 3P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 1x 2P16UL3/6 + 2x 2P16UL3/12 1x 3P16UL3/12 + 2x 3P16UL3/18
22 2x 1P16UL3/12 36 1x 1P16UL3/6 + 2x 1P16UL3/18 3x 2P16UL3/12 3x 3P16UL3/18
2x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 2x 2P16UL3/18 39 1x 3P16UL3/12 + 2x 3P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/12 3x 1P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 3x 3P16UL3/18

Earth Leakage
Circuit Breakers
1x 1P16UL3/6 + 2x 1P16UL3/12 1x 1P16UL3/12 + 2x 1P16UL3/18 28 3x 2P16UL3/12 42 1x 3P16UL3/12 + 2x 3P16UL3/18
1x 1P16UL3/6 + 1x 1P16UL3/18 37 1x 1P16UL3/6 + 2x 1P16UL3/18 2x 2P16UL3/18 3x 3P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 1x 2P16UL3/12 + 1x 2P16UL3/18 45 3x 3P16UL3/18
23 2x 1P16UL3/12 3x 1P16UL3/18 30 1x 2P16UL3/6 + 1x 2P16UL3/12 48 3x 3P16UL3/18
2x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 + 1x 2P16UL3/18
1x 1P16UL3/6 + 1x 1P16UL3/18 38 1x 1P16UL3/6 + 2x 1P16UL3/18 3x 2P16UL3/12
1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18 Note: For detailed information and
24 2x 1P16UL3/12 3x 1P16UL3/18 2x 2P16UL3/18 examples see page 20.
2x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 32 1x 2P16UL3/6 + 1x 2P16UL3/12
1x 1P16UL3/12 + 1x 1P16UL3/18 39 1x 1P16UL3/6 + 2x 1P16UL3/18 + 1x 2P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 3x 2P16UL3/12
3x 1P16UL3/12 3x 1P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18
25 2x 1P16UL3/12 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/18
2x 1P16UL3/18 40 1x 1P16UL3/6 + 2x 1P16UL3/18 34 1x 2P16UL3/6 + 1x 2P16UL3/12
1x 1P16UL3/12 + 1x 1P16UL3/18 2x 1P16UL3/12 + 1x 1P16UL3/18 + 1x 2P16UL3/18
ANNEX

2x 1P16UL3/6 + 1x 1P16UL3/18 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18

3x 1P16UL3/12 3x 1P16UL3/18 2x 2P16UL3/18
26 2x 1P16UL3/18 41 1x 1P16UL3/12 + 2x 1P16UL3/18 36 1x 2P16UL3/6 + 2x 2P16UL3/18
1x 1P16UL3/12 + 1x 1P16UL3/18 3x 1P16UL3/18 3x 2P16UL3/18
2x 1P16UL3/6 + 1x 1P16UL3/18 42 1x 1P16UL3/12 + 2x 1P16UL3/18 2x 2P16UL3/12 + 1x 2P16UL3/18
3x 1P16UL3/12 3x 1P16UL3/18 1x 2P16UL3/12 + 2x 2P16UL3/18

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 35

Altech-Busbars-April-2020.QXD_CircuitProtection 7/14/21 4:13 PM Page 10

U L 4 8 9 C U TTAB L E B U S B AR
1 PHASE BUSBAR
18mm2 (80A) and 25mm 2 (100A) L1
L2 22 mm

standard

25.1 mm 32.9 mm
spacing

13.8 mm
1.8 mm
5 mm
17.6 mm
UL 489

L3
L4 19.3 mm
1/2 pole

28.3 mm 28.5 mm
spacing

13.8 mm
1.8 mm
5 mm

Standard Spacing 26.4 mm End cap left off on purpose

for better internal visibility.

18mm² 1 phase 25mm² 1 phase

Length (mm) Length (mm)
Cuttable

Type / Cat. No. No. of w/o - Endcap w - Endcap Type / Cat. No. No. of w/o - Endcap w - Endcap
UL 489

Pins * L1 L2 Pins * L1 L2
1P18ULC3/6 6 112.2 115.2 1P25ULC3/6 6 112.2 115.2
1P18ULC3/9 9 165.0 168.0 1P25ULC3/9 9 165.0 168.0
1P18ULC3/12 12 217.8 220.8 1P25ULC3/12 12 217.8 220.8
1P18ULC3/15 15 270.6 273.6 1P25ULC3/15 15 270.6 273.6
1P18ULC3/18 18 323.4 326.4 1P25ULC3/18 18 323.4 326.4
1P18ULC3/24 24 429.0 432.0 1P25ULC3/24 24 429.0 432.0
1P18ULC3/36 36 640.2 643.2 1P25ULC3/36 36 640.2 643.2
1P18ULC3/48 48 851.4 854.4 1P25ULC3/48 48 851.4 854.4
1P18ULC3/57 57 1009.8 1012.8 1P25ULC3/57 57 1009.8 1012.8

1/2 Pole Auxiliary Spacing

UL 508

18mm² 1 phase 25mm² 1 phase

Length (mm) Length (mm)
Type / Cat. No. No. of w/o - Endcap w - Endcap Type / Cat. No. No. of w/o - Endcap w - Endcap
Pins * L3 L4 Pins * L3 L4
1P18ULC3H/6 6 156.2 159.2 1P25ULC3H/6 6 156.2 159.2
1P18ULC3H/9 9 235.4 238.4 1P25ULC3H/9 9 235.4 238.4
1P18ULC3H/12 12 314.6 317.6 1P25ULC3H/12 12 314.6 317.6
1P18ULC3H/15 15 393.8 396.8 1P25ULC3H/15 15 393.8 396.8
1P18ULC3H/18 18 473.0 476.0 1P25ULC3H/18 18 473.0 476.0
1P18ULC3H/24 24 631.4 634.4 1P25ULC3H/24 24 631.4 634.4
1P18ULC3H/30 30 789.8 792.8 1P25ULC3H/30 30 789.8 792.8
INDEX

1P18ULC3H/36 36 948.2 951.2 1P25ULC3H/36 36 948.2 951.2

1P18ULC3H/39 39 1027.4 1030.4 1P25ULC3H/39 39 1027.4 1030.4
*Other pin configurations are available. Please contact Altech, a minimum order quantity may be required.

Type/Cat. No: P35ULCT P50ULB BRULC (3 per strip) 18/25CAP3PULC

Description: Power Feed Lug Modular Direct Insulation Cap Endcap
Power Feed

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Altech-Busbars-April-2020.QXD_CircuitProtection 7/14/21 4:13 PM Page 11

U L 4 8 9 C U TTAB L E B U S B AR
2 PHASE BUSBAR
18mm2 (80A) and 25mm 2 (100A) L1
L2 22 mm

standard

25.1 mm 32.9 mm
spacing

13.8 mm
1.8 mm
5 mm
17.6 mm

UL 489
L3
L4
19.3 mm

1/2 pole

28.3 mm 28.5 mm
spacing

13.8 mm
5 mm 1.8 mm

Standard Spacing
17.6 mm End cap left off on purpose
44 mm
for better internal visibility.

18mm² 2 phase 25mm² 2 phase

Length (mm) Length (mm)

Cuttable
Type / Cat. No. No. of w/o - Endcap w - Endcap Type / Cat. No. No. of w/o - Endcap w - Endcap

UL 489
Pins * L1 L2 Pins * L1 L2
2P18ULC3/8 8 147.4 150.4 2P25ULC3/8 8 147.4 150.4
2P18ULC3/12 12 217.8 220.8 2P25ULC3/12 12 217.8 220.8
2P18ULC3/18 18 323.4 326.4 2P25ULC3/18 18 323.4 326.4
2P18ULC3/24 24 429.0 432.0 2P25ULC3/24 24 429.0 432.0
2P18ULC3/30 30 534.6 537.6 2P25ULC3/30 30 534.6 537.6
2P18ULC3/36 36 640.2 643.2 2P25ULC3/38 38 675.4 678.4
2P18ULC3/42 42 745.8 748.8 2P25ULC3/42 42 745.8 748.8
2P18ULC3/48 48 851.4 854.4 2P25ULC3/48 48 851.4 854.4
2P18ULC3/56 56 992.2 995.2 2P25ULC3/56 56 992.2 995.2

1/2 Pole Auxiliary Spacing

UL 508
18mm² 2 phase 25mm² 2 phase
Length (mm) Length (mm)
Type / Cat. No. No. of w/o - Endcap w - Endcap Type / Cat. No. No. of w/o - Endcap w - Endcap
Pins * L3 L4 Pins * L3 L4
2P18ULC3H/8 8 204.6 207.6 2P25ULC3H/8 8 204.6 207.6
2P18ULC3H/12 12 292.6 295.6 2P25ULC3H/12 12 292.6 295.6
2P18ULC3H/18 18 424.6 427.6 2P25ULC3H/18 18 424.6 427.6
2P18ULC3H/24 24 556.6 559.6 2P25ULC3H/24 24 556.6 559.6
2P18ULC3H/30 30 688.6 691.6 2P25ULC3H/30 30 688.6 691.6
2P18ULC3H/36 36 820.6 823.6 2P25ULC3H/36 36 820.6 823.6
2P18ULC3H/42 42 952.6 955.6 2P25ULC3H/42 42 952.6 955.6
2P18ULC3H/48 48 1084.6 1087.6 2P25ULC3H/48 48 1084.6 1087.6 INDEX
*Other pin configurations are available. Please contact Altech, a minimal order quantity may be required.

Type/Cat. No: P35ULCT P50ULB BRULC (3 per strip) 18/25CAP3PULC

Description: Power Feed Lug Modular Direct Insulation Cap Endcap
Power Feed

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Altech-Busbars-April-2020.QXD_CircuitProtection 7/14/21 4:14 PM Page 12

U L 4 8 9 C U TTAB L E B U S B AR
3 PHASE BUSBAR
18mm2 (80A) and 25mm 2 (100A) L1
L2 22 mm

standard

25.1 mm 32.9 mm
spacing

13.8 mm
1.8 mm
5 mm
17.6 mm
UL 489

L3
L4 22 mm

1/2 pole

25.1 mm 32.9 mm
spacing

13.8 mm
5 mm 1.8 mm
17.6 mm

Standard Spacing
35.2 mm
61.6 mm

18mm² 3 phase 25mm² 3 phase

Length (mm) Length (mm)
Cuttable
UL 489

Type / Cat. No. No. of w/o - Endcap w - Endcap Type / Cat. No. No. of w/o - Endcap w - Endcap
Pins * L1 L2 Pins * L1 L2
3P18ULC3/6 6 112.2 115.2 3P25ULC3/6 6 112.2 115.2
3P18ULC3/9 9 165.0 168.0 3P25ULC3/9 9 165.0 168.0
3P18ULC3/12 12 217.8 220.8 3P25ULC3/12 12 217.8 220.8
3P18ULC3/15 15 270.6 273.6 3P25ULC3/15 15 270.6 273.6
3P18ULC3/18 18 323.4 326.4 3P25ULC3/18 18 323.4 326.4
3P18ULC3/24 24 429.0 432.0 3P25ULC3/24 24 429.0 432.0
3P18ULC3/36 36 640.2 643.2 3P25ULC3/36 36 640.2 643.2
3P18ULC3/48 48 851.4 854.4 3P25ULC3/48 48 851.4 854.4
3P18ULC3/57 57 1009.8 1012.8 3P25ULC3/57 57 1009.8 1012.8

1/2 Pole Auxiliary Switch Spacing

UL 508

18mm² 3 phase 25mm² 3 phase

Length (mm) Length (mm)
Type / Cat. No. No. of w/o - Endcap w - Endcap Type / Cat. No. No. of w/o - Endcap w - Endcap
Pins * L3 L4 Pins * L3 L4
3P18ULC3H/6 6 121 124 3P25ULC3H/6 6 121 124
3P18ULC3H/9 9 182.6 185.6 3P25ULC3H/9 9 182.6 185.6
3P18ULC3H/12 12 244.2 247.2 3P25ULC3H/12 12 244.2 247.2
3P18ULC3H/15 15 305.8 308.8 3P25ULC3H/15 15 305.8 308.8
3P18ULC3H/18 18 367.4 370.4 3P25ULC3H/18 18 367.4 370.4
3P18ULC3H/24 24 490.6 493.6 3P25ULC3H/24 24 490.6 493.6
3P18ULC3H/36 36 737 740 3P25ULC3H/36 36 737 740
INDEX

3P18ULC3H/48 48 983.4 986.4 3P25ULC3H/48 48 983.4 986.4

3P18ULC3H/54 54 1106.6 1109.6 3P25ULC3H/54 54 1106.6 1109.6
*Other pin configurations are available. Please contact Altech, a minimum order quantity may be required.

Type/Cat. No: P35ULCT P50ULB BRULC (3 per strip) 18/25CAP3PULC

Description: Power Feed Lug Modular Direct Insulation Cap Endcap
Power Feed

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Altech-Busbars-April-2020.QXD_CircuitProtection 7/14/21 4:15 PM Page 13

Power Feed Devices Power Feed Lug Modular Direct Power Feed
Easy connection of power supply
wires to the busbar/MCB. Power
Feed Devices ensure permanent
connection. UL489 listed UL489 listed
E305318 E305318

Type/Cat. No. P35ULCT P50ULB

Electrical Ratings 115A/600V AC/DC 115A/600V AC/DC
Wire Range 14-2 AWG Cu 14-1 AWG Cu

UL 489
Wire Temperature Rating 75°C 75°C
Required Torque Cable 3.5Nm/31 lb. in. (14-6AWG)
4Nm (35.4 lb. in.) Side 4Nm/35.4 lb. in. (4-1AWG)
Busbar
Side 2.5Nm/22 lb. in.
Material of Lug Brass Brass
Insulation Material Polyamide Polyamide
For use with UL489 1, 2, 3 phase Busbar UL489 1, 2, 3 phase Busbar

Ø13.5 mm
(0.53 in.)
Dimensions

(0.49 in.)
12.4 mm

Cuttable
UL 489
17.75 mm
(0.70 in.)
11 mm
16.2 mm 31.1 mm
31.2 mm (0.00 in.)
82.6 mm

(0.16 in.)

(0.69 in.)
17.6 mm
4 mm
14 mm

6 mm
51.36 mm (20.22 in.)

UL 508
(0.24 in.)
6 mm 3 mm 12.6 mm

Assembly Instructions
(0.50 in.)

3P18ULC3/12 + 3P18ULC3/12 +
3 x P35ULCT 3 x P50ULB

INDEX

Accessories Insulation Caps Endcaps

Type/Cat. No: BRULC (3 per strip) Type/Cat. No: 18/25CAP3PULC

Description: Insulation Cap Description: Endcap

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Altech-Busbars-April-2020.QXD_CircuitProtection 7/14/21 4:15 PM Page 14

Altech UL489 Busbar Systems

Configuration and Assembly of UL489 Busbars
UL489 Busbars are available in 3 different Pin Configurations per Phase, (6, 12 and 18 Pins).

The UL489 busbar cannot be cut, since the creepage and clearance distance requirements from UL are too
stringent. Therefore, to obtain the desired No. of Pins, Busbar-Pins can be overlapped as explained below:
1) Busbars are overlapped backwards to each other. Both Pins of each Busbar fit together
in the terminals of the Miniature Circuit Breaker.
2 The Number of overlapping Pins of 2 Busbar must be a multiplier of the Number of
UL 489

Phases to keep existing Phase sequence. (Can be overlapped by more than the number
of phases).
3) Any available combination of the 3 different Pin configurations is possible.
4) In most cases there is more than 1 combination possible.
5) For more possible configurations see Busbar Selection Table on page 21.

Configuration Examples*
16 Pins: 3 x 1P16UL3/6

3/6
3/6 1P16UL
1P16UL
Cuttable
UL 489

3/6
1P16UL

1 Phase
29 Pins: 1 x 1P16UL3/12 + 1 x 1P16UL3/18

3/12
1P16UL

3/18
1P16UL

22 Pins: 2 x 2P16UL3/12
UL 508

3/12
2P16UL

3/12
2P16UL

2 Phase
36 Pins: 2 x 2P16UL3/12 + 1 x 2P16UL3/18

3/12
3/12 2P16UL
2P16UL

3/18
2P16UL
INDEX

27 Pins: 1 x 3P16UL3/12 + 1 x 3P16UL3/18

3/12
3P16UL
3/18
3P16UL

3 Phase
39 Pins: 1 x 3P16UL3/12 + 2 x 3P16UL3/18

3/12 3/18
3P16UL 3P16UL

3/18
3P16UL

*For Questions, other configurations and detailed information please contact Altech Corp.

14 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

 Without Altech Busbar System

Altech UL1077/508
UL 489

Busbar System
UL508 listed
E205412

UL1077/508
UL 508

With Altech Busbar System

Listed Busbars
The Altech Busbar System is an
innovative way to jumper up to 57
poles of Manual Motor Controllers
(MMC) and Supplementary
Protectors (SP).
UL 1077

The advantages of this busbar

system are:
• 30% Installation time savings
• Panel space savings
Universal UL1077/508 Busbar
• Reduced maintenance
• High electrical ratings fits most Supplementary Protectors
and Manual Motor Controllers
Equipment Breakers

in the market!
UL 1077

UL1077/508 Busbar System Please contact Altech for details and further information.

• 1-57 different pin configurations

• 1/2 pole spacing (auxiliary switch) available
• Power Feeding:
Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A)
• UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of
Manual Motor Controllers and Supplementary Protectors
Earth Leakage
Circuit Breakers

• UL recognized and listed for use with most popular UL1077 supplementary
protectors and UL508 Manual Motor Controllers in the market.
• Customers can cut the Busbar without losing the UL approval
• Line/Load reversible
Technical Specifications Busbars UL1077/ 508
Material of Busbar Copper
Material of Insulation (Housing) Polyamide
Electrical Ratings 18mm2: 80A/600V AC/DC*
25mm2: 100A/600V AC/DC*
Short Circuit Withstand Rating 10kA
ANNEX

Applying Standards UL508, VDE0660 Part 100 and 502,

VDE 0606, VDE 0659

* 1000VDC ratings can be achieved by using all poles at the same voltage and polarity.

70 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

Altech UL1077/508 Busbar System

UL 489
Power Feed Methods
80A/100A per phase
1 2 3
1) Start/ End Feed Method (P50UT)

P50UT* / P50UB*
80A/100A

UL 508
80A/100A
With the P50UT Power Feed Lug or the P50UB Modular 80A/100A

Direct Power Feed as a Start/End Feeding Device a

maximum input current of 80A/100A per Phase can be
achieved. 80A with 18mm² Busbar and 100A with 25mm²
80A/100A
Busbar. 80A/100A
80A/100A

(P50UB)
1 2 3

UL 1077
80A/100A per phase

115A per phase

1 2 3
2) Center/ Middle Feed Method (P50UT)

P50UT* / P50UB*

Equipment Breakers
35A/15A 80A/100A
35A/15A 80A/100A
35A/15A 80A/100A
With the P50UT Power Feed Lug or the P50UB Modular

UL 1077
Direct Power Feed as a Center/Middle Feeding Device a
maximum input current of 115A per Phase can be achieved.
(18mm²: 80A + 35A; 25mm²: 100A + 15A) 35A/15A 80A/100A
35A/15A 80A/100A
35A/15A 80A/100A

1 2 3 (P50UB)
115A per phase

Earth Leakage
Circuit Breakers
80/100A 80/100A
80/100A 80/100A
P95UB* 80/100A 80/100A

With the P95UB Power Feed Block as a Center/Middle

Feeding Device a maximum input current of 160A/200A per (P95UB)
Phase can be achieved (160A with 18mm² Busbar and 200A
with 25mm² Busbar).

Note: The Power Feed Block can only be used with a

1 2 3
standard spacing 3 Phase UL1077/508 Busbar.
ANNEX

160A/200A per phase

* For complete specifications and description of Feeding Devices see page 78-79.

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 71

 1 PHASE BUSBAR - standard spacing
UL 489

18mm2 for 80A

11x17.8 = 195.8 mm 18mm² 25mm²

15.9 mm
15.9 mm
UL508 listed 17.8 mm
E205412 5.5 mm 1.5 mm 2 mm

5.8 mm
5.8 mm
17.6 mm 17.6 mm
UL 508

shown: 1P18U1/12
212 mm

18mm2 for 80A* 18mm2 for 80A*

Type/ No. of Length Type/ No. of Length
Cat. No. Pins [mm] Cat. No. Pins [mm]

1P18U1/2 2 32 1P18U1/30 30 536

1P18U1/3 3 54 1P18U1/31 31 554
UL 1077

1P18U1/4 4 79 1P18U1/32 32 572

1P18U1/5 5 88 1P18U1/33 33 590
1P18U1/6 6 106 1P18U1/34 34 608
1P18U1/7 7 122 1P18U1/35 35 626
1P18U1/8 8 140 1P18U1/36 36 638
1P18U1/9 9 158 1P18U1/37 37 656
1P18U1/10 10 177 1P18U1/38 38 674
1P18U1/11 11 195 1P18U1/39 39 692
1P18U1/12 12 212 1P18U1/40 40 710
1P18U1/13 13 230 1P18U1/41 41 728
Equipment Breakers

1P18U1/14 14 248 1P18U1/42 42 746

1P18U1/15 15 269 1P18U1/43 43 764
1P18U1/16 16 286 1P18U1/44 44 782
UL 1077

1P18U1/17 17 304 1P18U1/45 45 800

1P18U1/18 18 322 1P18U1/46 46 818
1P18U1/19 19 340 1P18U1/47 47 836
1P18U1/20 20 354 1P18U1/48 48 854
1P18U1/21 21 374 1P18U1/49 49 872
1P18U1/22 22 392 1P18U1/50 50 890
1P18U1/23 23 410 1P18U1/51 51 908
1P18U1/24 24 428 1P18U1/52 52 926
1P18U1/25 25 446 1P18U1/53 53 942
1P18U1/26 26 464 1P18U1/54 54 960
1P18U1/27 27 482 1P18U1/55 55 978
Earth Leakage
Circuit Breakers

1P18U1/28 28 500 1P18U1/56 56 996

1P18U1/29 29 518 1P18U1/57 57 1014

ACCESSORIES
ANNEX

Type/Cat. No: P50UT-LP P50UB BRB5W 18/25CAP1P

Description: Power Feed Lug Modular Direct Power Feed Insulation Cap End Cap

* 25mm2 version for 100A available upon request.

72 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

1 PHASE BUSBAR - 1/2 pole spacing

UL 489
18mm2 for 80A

11x27 = 297 mm 18mm² 25mm²

15.9 mm

15.9 mm
UL508 listed 27 mm
E205412 3.5 mm 1.5 mm 2 mm

5.8 mm

5.8 mm
17.6 mm 17.6 mm

UL 508
316 mm shown: 1P18U1H/12

18mm2 for 80A* 18mm2 for 80A*

Type/ No. of Length Type/ No. of Length
Cat. No. Pins [mm] Cat. No. Pins [mm]

1P18U1H/2 2 40 1P18U1H/20 20 528

1P18U1H/3 3 68 1P18U1H/21 21 554

UL 1077
1P18U1H/4 4 95 1P18U1H/22 22 582
1P18U1H/5 5 122 1P18U1H/23 23 608
1P18U1H/6 6 150 1P18U1H/24 24 635
1P18U1H/7 7 176 1P18U1H/25 25 662
1P18U1H/8 8 204 1P18U1H/26 26 690
1P18U1H/9 9 230 1P18U1H/27 27 716
1P18U1H/10 10 258 1P18U1H/28 28 744
1P18U1H/11 11 284 1P18U1H/29 29 770
1P18U1H/12 12 316 1P18U1H/30 30 798
1P18U1H/13 13 338 1P18U1H/31 31 824

Equipment Breakers
1P18U1H/14 14 365 1P18U1H/32 32 852
1P18U1H/15 15 392 1P18U1H/33 33 878
1P18U1H/16 16 420 1P18U1H/34 34 905

UL 1077
1P18U1H/17 17 446 1P18U1H/35 35 932
1P18U1H/18 18 474 1P18U1H/36 36 960
1P18U1H/19 19 500

Earth Leakage
Circuit Breakers
ACCESSORIES
ANNEX

Type/Cat. No: P50UT-LP P50UB BRB5W 18/25CAP1P

Description: Power Feed Lug Modular Direct Power Feed Insulation Cap End Cap

* 25mm2 version for 100A available upon request.

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 73

 2 PHASE BUSBAR - standard spacing
UL 489

18mm2 for 80A / 25mm2 for 100A

11x17.8 = 195.8 mm 18mm² 25mm²
17.8 mm
6 mm 1.5 mm 2 mm

UL508 listed

36.5 mm

36.5 mm
24 mm

24 mm
E205412

21.6 mm 21.6 mm
UL 508

shown: 2P18U3/12
214 mm

18mm2 for 80A 25mm2 for 100A

Type/ No. of Length Type/ No. of Length
Cat. No. Pins [mm] Cat. No. Pins [mm]

2P18U3/4 4 69 2P25U3/4 4 69
2P18U3/6 6 104 2P25U3/6 6 104
UL 1077

2P18U3/8 8 140 2P25U3/8 8 140

2P18U3/10 10 177 2P25U3/10 10 177
2P18U3/12 12 214 2P25U3/12 12 214
2P18U3/14 14 249 2P25U3/14 14 249
2P18U3/16 16 283 2P25U3/16 16 283
2P18U3/18 18 319 2P25U3/18 18 319
2P18U3/20 20 357 2P25U3/20 20 357
2P18U3/22 22 390 2P25U3/22 22 390
2P18U3/24 24 426 2P25U3/24 24 426
2P18U3/26 26 460 2P25U3/26 26 460
Equipment Breakers

2P18U3/28 28 498 2P25U3/28 28 498

2P18U3/30 30 532 2P25U3/30 30 532
2P18U3/32 32 568 2P25U3/32 32 568
UL 1077

2P18U3/34 34 604 2P25U3/34 34 604

2P18U3/36 36 640 2P25U3/36 36 640
2P18U3/38 38 675 2P25U3/38 38 675
2P18U3/40 40 710 2P25U3/40 40 710
2P18U3/42 42 746 2P25U3/42 42 746
2P18U3/44 44 782 2P25U3/44 44 782
2P18U3/46 46 818 2P25U3/46 46 818
2P18U3/48 48 854 2P25U3/48 48 854
2P18U3/50 50 888 2P25U3/50 50 888
2P18U3/52 52 924 2P25U3/52 52 924
Earth Leakage

2P18U3/54 54 960 2P25U3/54 54 960

Circuit Breakers

2P18U3/56 56 994 2P25U3/56 56 994

ACCESSORIES
ANNEX

Type/Cat. No: P50UT P50UB BRB5W 18/25CAP3P

Description: Power Feed Lug Modular Direct Power Feed Insulation Cap End Cap

74 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

2 PHASE BUSBAR - 1/2 pole spacing

UL 489
18mm2 for 80A / 25mm2 for 100A

5x44.5 = 222.5 mm
44.5 mm 18mm² 25mm²
17.8 mm
UL508 listed 6 mm 1.5 mm 2 mm
E205412

36.5 mm
36.5 mm

24 mm
24 mm
21.6 mm 21.6 mm

UL 508
255.5 mm
shown: 2P18U3H/12

18mm2 for 80A 25mm2 for 100A

Type/ No. of Length Type/ No. of Length
Cat. No. Pins [mm] Cat. No. Pins [mm]

2P18U3H/4 4 78 2P25U3H/4 4 78
2P18U3H/6 6 124 2P25U3H/6 6 124

UL 1077
2P18U3H/8 8 168 2P25U3H/8 8 168
2P18U3H/10 10 212 2P25U3H/10 10 212
2P18U3H/12 12 256 2P25U3H/12 12 256
2P18U3H/14 14 302 2P25U3H/14 14 302
2P18U3H/16 16 346 2P25U3H/16 16 346
2P18U3H/18 18 390 2P25U3H/18 18 390
2P18U3H/20 20 435 2P25U3H/20 20 435
2P18U3H/22 22 480 2P25U3H/22 22 480
2P18U3H/24 24 524 2P25U3H/24 24 524
2P18U3H/26 26 568 2P25U3H/26 26 568

Equipment Breakers
2P18U3H/28 28 612 2P25U3H/28 28 612
2P18U3H/30 30 658 2P25U3H/30 30 658

UL 1077
2P18U3H/32 32 702 2P25U3H/32 32 702
2P18U3H/34 34 746 2P25U3H/34 34 746
2P18U3H/36 36 790 2P25U3H/36 36 790
2P18U3H/38 38 835 2P25U3H/38 38 835
2P18U3H/40 40 880 2P25U3H/40 40 880
2P18U3H/42 42 924 2P25U3H/42 42 924
2P18U3H/44 44 968 2P25U3H/44 44 968
2P18U3H/46 46 1012 2P25U3H/46 46 1012
2P18U3H/48 48 1058 2P25U3H/48 48 1058
2P18U3H/50 50 1102 2P25U3H/50 50 1102
2P18U3H/52 52 1146 2P25U3H/52 52 1146

Earth Leakage
2P18U3H/54 54 1192 2P25U3H/54 54 1192

Circuit Breakers
2P18U3H/56 56 1235 2P25U3H/63 56 1235

ACCESSORIES ANNEX

Type/Cat. No: P50UT P50UB BRB5W 18/25CAP3P

Description: Power Feed Lug Modular Direct Power Feed Insulation Cap End Cap

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 75

 3 PHASE BUSBAR - standard spacing
UL 489

18mm2 for 80A / 25mm2 for 100A

11x17.8 = 195.8 mm 18mm² 25mm²

17.8 mm
6 mm 1.5 mm 2 mm
UL508 listed

36.5 mm

36.5 mm
E205412

24 mm

24 mm
21.6 mm 21.6 mm
UL 508

shown: 3P18U3/12
214 mm

18mm2 for 80A 25mm2 for 100A

Type/ No. of Length Type/ No. of Length
Cat. No. Pins [mm] Cat. No. Pins [mm]

3P18U3/6 6 104 3P25U3/6 6 104

UL 1077

3P18U3/9 9 159 3P25U3/9 9 159

3P18U3/12 12 214 3P25U3/12 12 214
3P18U3/15 15 266 3P25U3/15 15 266
3P18U3/18 18 318 3P25U3/18 18 318
3P18U3/21 21 374 3P25U3/21 21 374
3P18U3/24 24 427 3P25U3/24 24 427
3P18U3/27 27 481 3P25U3/27 27 481
3P18U3/30 30 545 3P25U3/30 30 545
3P18U3/33 33 586 3P25U3/33 33 586
3P18U3/36 36 639 3P25U3/36 36 639
Equipment Breakers

3P18U3/39 39 692 3P25U3/39 39 692

3P18U3/42 42 746 3P25U3/42 42 746
UL 1077

3P18U3/45 45 800 3P25U3/45 45 800

3P18U3/48 48 854 3P25U3/48 48 854
3P18U3/51 51 906 3P25U3/51 51 906
3P18U3/54 54 960 3P25U3/54 54 960
3P18U3/57 57 1012 3P25U3/57 57 1012

ACCESSORIES
Earth Leakage
Circuit Breakers

Type/Cat. No: P50UT P50UB P95UB

Description: Power Feed Lug Modular Direct Power Feed Power Feed Block
ANNEX

Type/Cat. No: BRB5W 18/25CAP3P

Description: Insulation Cap End Cap

76 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

3 PHASE BUSBAR - 1/2 pole spacing

UL 489
18mm2 for 80A / 25mm2 for 100A

3x62.3 = 186.9 mm
62.3 mm
2x17.8 = 35.6 mm 18mm² 25mm²
17.8 mm
UL508 listed 6 mm 1.5 mm 2 mm
E205412

36.5 mm

36.5 mm
24 mm

24 mm
21.6 mm 21.6 mm

UL 508
shown: 3P18U3H/12
236.5 mm

18mm2 for 80A 25mm2 for 100A

Type/ No. of Length Type/ No. of Length
Cat. No. Pins [mm] Cat. No. Pins [mm]

3P18U3H/6 6 114 3P25U3H/6 6 114

UL 1077
3P18U3H/9 9 176 3P25U3H/9 9 176
3P18U3H/12 12 235 3P25U3H/12 12 235
3P18U3H/15 15 302 3P25U3H/15 15 302
3P18U3H/18 18 364 3P25U3H/18 18 364
3P18U3H/21 21 426 3P25U3H/21 21 426
3P18U3H/24 24 488 3P25U3H/24 24 488
3P18U3H/27 27 550 3P25U3H/27 27 550
3P18U3H/30 30 612 3P25U3H/30 30 612
3P18U3H/33 33 675 3P25U3H/33 33 675
3P18U3H/36 36 738 3P25U3H/36 36 738

Equipment Breakers
3P18U3H/39 39 800 3P25U3H/39 39 800
3P18U3H/42 42 862 3P25U3H/42 42 862

UL 1077
3P18U3H/45 45 924 3P25U3H/45 45 924
3P18U3H/48 48 982 3P25U3H/48 48 982
3P18U3H/51 51 1048 3P25U3H/51 51 1048
3P18U3H/54 54 1112 3P25U3H/54 54 1112
3P18U3H/57 57 1174 3P25U3H/57 57 1174

ACCESSORIES

Earth Leakage
Circuit Breakers

Type/Cat. No: P50UT P50UB

Description: Power Feed Lug Modular Direct Power Feed
ANNEX

Type/Cat. No: BRB5W 18/25CAP3P

Description: Insulation Cap End Cap

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 77

 Power Feed Devices Power Feed Lug Power Feed Lug Modular Direct
UL 489

Power Feed
Easy connection of power
supply wires to the
busbar/MCB. Power Feed
Devices ensure permanent
connection.

UL508 listed UL508 listed UL508 listed

E205412 E205412 E205412
Type/Cat. No. P50UT-LP P50UT P50UB
UL 508

Electrical Ratings 115A/1000V AC/DC 115A/1000V AC/DC 115A/1000V AC/DC

Wire Range 10-1/0 AWG Cu 10-1/0 AWG Cu 14-1 AWG Cu
Wire Temperature Rating 60°C 60°C 75°C
Recommended/ Cable 3.5Nm/31 lb. in. (14-6AWG)
Side 4Nm/35.4 lb. in. (4-1AWG)
Required Torque 5.6Nm (50lb. in.) 5.6Nm (50lb. in.)
Busbar
Side 2.5Nm/22 lb. in.
Material of Lug/ Terminal Brass Brass Brass
Insulation Material Polyamide Polyamide Polyamide
For use with UL1077/508 18 and 25mm2 UL1077/508 18 and 25mm2 UL1077/508 18 and 25mm2
UL 1077

1 phase busbars 2, 3 phase busbars 1, 2, 3 phase busbars

Dimensions Ø11 Ø11

21 mm
21 mm

17.75 mm

12.3 mm
10.4 mm
4 mm
16.2 mm 28.5 mm
Equipment Breakers

16.1 mm 28.5 mm

40 mm
UL 1077

13.9 mm

59 mm
37.6 mm

28.8 mm 17.75 mm
18.5 mm

29.8 mm

6 mm 3 mm 6.3 mm 3 mm

Assembly Instructions
Earth Leakage
Circuit Breakers

3P18U3/XX + 3 x P50UT 3P18U3/XX + 3 x P50UB

ANNEX

The power feed lugs (Cat. # P50UT) fit together with the lugs of
the busbar in the terminals of the connected device.

78 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com

 UL 489
Power Feed Block
Dimensions

UL508 listed
E205412

43.5 mm
Type/Cat. No. P95UB
31.6 mm 31.6 mm
Electrical Ratings 200A/ 600V AC/DC

UL 508
Wire Range 1-4/0 AWG Cu 35.6 mm 35.6 mm 62.5 mm
Wire Temperature Rating 75°C
Recommended/
19.5Nm (175lb. in.)
Required Torque

63 mm
Material of Lug/ Terminal Brass
Insulation Material Polyamide
For use with UL1077/508 18 and 25mm2
3 phase busbars
(standard spacing only) 88.3 mm

Assembly Instructions

UL 1077
NOTE: The Power Feed Block uses the space of 5 Pins
of the standard spacing Busbar (see drawing below).
Phase 1 connects to Pin 1, Phase 2 to Pin 3 and Phase
3 to Pin 5. Pin 2 and 4 are not in use. Pin 6 should be
covered with an insulation cap if phase sequence stays
the same. Therefore, the Power Feed Block covers 6 pins
to connect to the three phases.

Equipment Breakers
1 2 3 1 2 3 Phase

UL 1077
1 2 3 4 5 6 Pin

Phase 1 Phase 2
Phase 3

Earth Leakage
Circuit Breakers
Miscellaneous Accessories
End Caps Insulation Caps

18/25CAP1P 18/25CAP3P

Type/Cat. No: 18/25CAP1P Type/Cat. No: BRB5W (5 per strip)

ANNEX

For use with: 18/25mm2 1 phase Busbar For use with: 18/25mm2 1, 2, 3 phase Busbar

Type/Cat. No: 18/25CAP3P

For use with: 18/25mm2 2, 3 phase Busbar

Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • www.altechcorp.com 79