ML620

Accelerate Success

The ML620 Ethernet Access Devices (EADs) from All ML620 EAD models provide 802.1q VLAN-aware wire-
Actelis® enable delivery of high-speed speed bridging, double tagging (VLAN stacking) for end-user
carrier Ethernet services over the existing copper VLAN transparency, L2 (Ethernet priority) and L3 (ToS/Diff-Serv)
classification with four traffic classes, RSTP/STP, bandwidth
and fiber infrastructure. The ML620s are intelligent,
monitoring, and Multicast/Broadcast limiting.
compact EADs that deliver up to 100 Mbps of
symmetrical Ethernet traffic with fiber quality over The ML620 EADs provide proactive and dynamic tools for enhanced
existing copper pairs. trouble shooting and monitoring capabilities. Advanced Carrier-class
EFM OAM, including 802.3ah, CFM (802.1ag) and Y.1731 (ITU), are
Available in either 2, 4 or 8 copper pairs with optional SFP fiber incorporated, offering both physical link as well as service level end-
configurations*, the ML622/ML624/ML628 EADs can be deployed to-end advanced troubleshooting mechanisms.
in a Point-to-Point configuration, optional copper Add-Drop chain, or
as the CPE in a Point-to-Multi-Point configuration with Actelis’ EFM The ML620 EAD platforms can be managed In- and Out-of-Band
switches. With its superior performance, extensive functionality and by the MetaASSIST™ View graphical craft application and via the
low cost, the ML620 EAD platforms offer rapid service delivery and multi-platform Element Management System, MetaASSIST EMS. The
allow for complete utilization of the existing network infrastructure. management protocols include standard command line interface and
SNMP using standard MIBs for seamless integration with third-party
The ML620 EAD platforms are interoperable with any standard Network Management Systems (NMS).
Ethernet switch, router or hub. Compliant with Metro Ethernet Forum
(MEF) specifications, ML620 EAD systems seamlessly integrate
into carrier Ethernet networks. Equipped with four 10/100Base-T
Ethernet interfaces and an optional 100Base-FX Small Form Factor
(SFP) port, the ML620 EAD platforms allow assignment of a service
or a customer per port. A DS3/E3 uplink can be used to connect to
legacy networks instead of the 100Base-FX SFP.
The ML620 EAD models let service providers create an intelligent
Ethernet access edge with bandwidth limiting per ingress port and
traffic shaping on the Ethernet Access uplink (HSL). The ML620 is
fully compliant with the MEF 9 and 14 specifications.
Powered by Actelis Networks’ award-winning EFMplus™ technology,
the rate, reach and reliability are increased significantly using
advanced Dynamic Spectrum Management (DSM) and Dynamic Rate
Boost (DRB) techniques. This technology doubles the rate/reach in
real-world field deployments. Combined with Actelis industry-leading
XR239 EFM Repeaters, the reach can be extended even further.

Highlights Applications Markets Served

• IEEE 802.3ah Ethernet in the First • Transparent LAN Service • RBOCs, PTTs, Independent
Mile (EFM) 2Base-TL Solution • Fast Internet Access Operators, Competitive Operators
• MEF Certified Ethernet Capabilities • Metro Ethernet Extension • Federal, State and Local
• Rapid Service Deployment • Private Campus Network Government Agencies
• Superior Rate, Reach & Reliability Intra-Connection • Education, Health Care, Utilities,
• Low Delay and Jitter for Voice and • MDU/MTU Backhaul Private Campuses
Video Transmission • DSLAM Backhaul
• Worldwide Spectral Compliancy • WiFi and Cellular Backhaul (Radio
• OSMINE, NEBS III, FCC, UL, CE Access Network)
• Environmentally Hardened • Leased Lines Replacement
ML620

Accelerate Success

Specifications
Interfaces Management • Weight: 3.75 lbs / 1.7 Kg
Ethernet (Network/User) Protocols • Mounting Rack: 2 units in 19”, 23” or ETSI racks
• 10/100Base-T: 4 ports, Connector: RJ45, Auto- • SNMP: SNMP v1 and v2c Desktop, Wall Mount
MDIX • Command Line Interface: TL1, Industry • Power DC: -48/-60 VDC nominal, 13.5-17 Watt (per
• 100Base-FX Connector*: 1 port (option) SFP Standard CLI model) AC: 90-264 VAC, 47-63 Hz, 17-21 Watt (per
Based, MSA compliant • Remote Access: Telnet model)
High Speed Link (Bonded Copper Pairs) • Secure Access (option): SSH v2 Environmental
• Protocol: IEEE 802.3ah 2Base-TL • Time Synchronization: SNTP v3 • Operating Temp: -40° to +65°C*
• Line code: ITU-T G.991.2 rev. 2 • Web Access: HTTP • Storage Temp: -40° to +75°C
• Bandwidth: Up to 100 Mbps (symmetrical) • File transfer: FTP, TFTP • Relative humidity: Up to 95%, non-cond.
• Number of Copper Pairs: 2-8, Connector: RJ45 • IEEE 802.3ah EFM OAM: Dying Gasp *Tested in accordance with NEMA temperature requirements
(per modem/pair) • User Authentication: RADIUS and/or Regulatory Approval/Certifications
• End-to-end Delay: 2-4 ms (typical) local passwords Metro Ethernet Forum
• Spectral Compliance: ITU-T G.991.2 (Annex A,
Metro Ethernet Forum – Advanced Service • MEF 9, 14
B, F, G), ETSI TS 101 524 (Annex E), ANSI T1.417,
T1.426, Per-country regulatory, compliant spectral Provisioning and Traffic Management Safety
modes Quality of Service • UL 60950, CSA C22.2 60950
• Spectral Friendliness: Dynamic Spectral Shaping • Classes of Service: 4 • EN 60950, IEC 60950
(DSS) • Scheduler: WFQ, SP EMC
• Cross-talk Cancellation: Dynamic Rate Boost • Classification: L2 802.1p/Q priorities, L3 ToS/ • FCC Part 15 Class B
(DRB) DiffServ • ICES-003 Class B
• Sealing Current: 48VDC/1.5mA nominal Applications • ETSI EN 300 386 Class B
Environmental Parameters
• EMS: MetaASSIST EMS • ETSI ETS 300 132-2
Management (Out-of-Band)
• Craft GUI: MetaASSIST View • ITU-T K.20, K.21
• 10/100Base-T Connector: RJ45, Auto-MDIX
Front Panel Indicators (LEDs) NEBS
• Craft: EIA RS-232 (DCE),Connector: DB9
• Power • Level III (GR-1089-CORE, GR-63-CORE)
LAN Protocols • Status CE
• Dynamic Bridging: IEEE 802.1, 8K MAC addresses • EMC and Safety
• Alarm
• Discovery Mechanisms: LLDP Environmental
• MLP per modem/pair
• VLAN Tagging: IEEE 802.1Q • GR-63-CORE
• ACT (Activity)
• Double Tagging: Q-in-Q • ETSI ETS 300 019
• LNK (Link) per Ethernet/HSL port
• RSTP, STP: IEEE 802.1d
• Link Aggregation: IEEE 802.3ad
Alarm Contacts
• Terminal Block: 2 Input, 1 Output Physical
• Provider Bridges: IEEE 802.1ad
• Dimensions: Height: 1.6” / 40mm (1U), Depth:
• OAM: IEEE 802.3ah clause 57 (EFM OA&M)
11.0” / 280mm, Width: 8.4” / 213mm
IEEE 802.1ag, ITU Y.1731

Corporate Headquarters Americas Sales Office, 6150 Stevenson Blvd. Fremont, CA 94538, USA
Tel. 1.866.ACTELIS Tel. +1.510.545.1045 Fax. +1.510.545.1075 [email protected]

International Sales Office 25 Bazel P.O.B. 10173 Petach-Tikva 49103, Israel

Tel. +972.3. 924.3491 Fax. +972.3.924.3492 [email protected]

Actelis Networks Inc., and the Actelis logo are registered trademarks of Actelis Networks, Inc. MetaASSIST, EFMplus, The 3 R’s of EFM, and The Broadband Acceleration Company are trademarks rotl/13297 07.09.12
of Actelis Networks, Inc. Actelis reserves the right to change product specifications at any time without notice. Copyright ©2012. All Rights Reserved.