Kice Piping

Download as pdf or txt
Download as pdf or txt
You are on page 1of 48

Kice Industries Speed Spout Technical Manual

Table of Contents
ELBOWS: COUPLINGS AND CLAMPS:
Tube & Pipe Bend Availability Chart .......Page 2 81S/84A/86N Couplings & Clamps........Page 30
Kice Stocked Formed Elbows................Page 3 82M Heavy Duty Tube OD
Flat Back Elbows...................................Page 4 Compression Couplings..................Page 31
Extended Tangent Flat Back Elbows......Page 5 82M Heavy Duty Iron Pipe Size
11 & 12 Elbows ......................................Page 6 Compression Couplings..................Page 32
14 “Riker” Elbows ..................................Page 7 FLANGES & SUPPORT RINGS:
Special Ceramic & Sand-T Ells ..............Page 8 87A/88A/89 Flanges & Support Rings ...Page 33
ADAPTERS: Kice Fabricated Angle Ring Flanges ......Page 34
25/26M/26F Adapters............................Page 9 91/92/93 Fittings ...................................Page 35
27/28/29 Adapters.................................Page 10 MAGNET SECTIONS:
TRANSITIONS: 94M Manual Gravity Flow Magnet
31/32/33 Transitions..............................Page 11 Section............................................Page 36
34/35/36 Transitions..............................Page 12 94A Automated Gravity Flow Magnet
BRANCH FITTINGS: Section............................................Page 37
41/42/43/44 Branch Fittings..................Page 13 MISCELLANEOUS COMPONENTS:
45/46/47 Branch Fittings.......................Page 14 95 & 96 Damper Fittings ........................Page 38
GRAVITY VALVES: 97 & Null Point Fittings/NH Nozzle .........Page 39
51/52/53 Splitter Valves.........................Page 15 SGH Streamguard Blender Fitting .........Page 40
54 Dual Splitter Valves...........................Page 16 Porthole Sight Glass Assemblies...........Page 41
55A Spout Diverter Valves .....................Page 17 HOSE & CAMLOCKS:
56 Bucket Valve.....................................Page 18 Hose & Hose Connections.....................Page 42
SLIDE GATE VALVES: Camlock Connections ...........................Page 43
57GM & 57GA Slide Gate Valves ...........Page 19 Common Kice Hose Products................Page 44
58GM Slide Gate Valves........................Page 20 DATA & DIMENSIONS:
58GA Slide Gate Valves ........................Page 21 Materials of Construction, Tube Data,
59BS & 59BD Diamond Slide Valves .....Page 22 Dimensions & Useful Formulas .......Page 45
65 Switch Station & Automated Pipe and ANSI Flange Dimensions ........Page 46
Controls Package Specifications.....Page 23 Kice Round & Square Airlock Flange
DIVERTER & BIN FILL VALVES: Dimensions.....................................Page 47
67Q, 2-way High Pressure Diverter Electrical Enclosure Classifications
Valves .............................................Page 24 & Types ...........................................Page 48
67Q, 3-way High Pressure Diverter
Valves .............................................Page 25
68Q Bin Fill Valves.................................Page 26
SIGHT GLASSES:
71/72/73 Sight Glasses .........................Page 27
LIDS, CAPS, PLUGS, & SPOUTS:
74/75/76/77 Fittings ..............................Page 28
78/79/79N/79NL Fittings .......................Page 29
This Kice Speed Spout Technical Manual is designed to be a guide for product selection, approximate dimensions and installation guidelines. The
dimensions supplied may not be “as manufactured.” Contact Kice Technical Sales or Kice QuikShip for certified drawings. For warranty information,
contact Kice Industries.
Copyright 2001 by Kice Industries
All Rights Reserved
This catalog is copyrighted by Kice Industries, Inc., and may not be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Kice Industries, Inc., Wichita, KS.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -1- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
TUBE & PIPE BEND AVAILABILITY CHART
Kice utilizes several manufacturers of tubing and tube benders. Combined with our inventory, no other
supplier provides the full range of products and services to the pneumatic conveying industry.

Pipe and tube bends of up to 180 degrees are readily T


available in aluminum, stainless, carbon steel, and
galvanized in the sizes listed below. Other centerline D
radii are available but not shown. Special shapes, “U”
bends, offsets, and bifurcated bends available upon 90°
request.

A large inventory is maintained, available for 72-hour CLR


shipment direct from our suppliers. Many popular bend
sizes are stocked in carbon steel, aluminum, and
stainless steel materials.
T
TUBE PIPE D (OD) COMMON CENTERLINE TANGENT
SIZE SIZE IN MM RADII (CLR) INCHES (Nominal)

1" 1.000 25.4 2¼, 3, 4, 6 4"


1-1/8" 1.125 28.6 3 4"
1-1/4" 1.250 31.8 3, 4, 5, 7¼ 4"
1" 1.315 33.4 1¾, 2, 2 7/8, 3, 4, 5 4"
1-1/2" 1.500 38.1 2½, 3, 4, 5, 6, 7½, 9, 12, 15, 18, 24, 30, 36, 48 4"
1-1/4" 1.660 42.2 3½, 4, 6¼ 4"
1-3/4" 1.750 44.5 2½, 8, 9, 12, 15, 17, 24, 30, 36, 48 4"
Standard
1-1/2" 1.900 48.3 5, 6, 7½, 9, 10, 12, 15, 18, 24, 30, 36, 48 4" Tubing OD
2" 2.000 50.8 2½, 5, 6, 8, 8½, 9, 10, 12, 15, 18, 24, 30, 36, 48 4" wall thicknesses:
2-1/8" 2.125 54.0 5, 12, 24, 30, 36 4¼" 16 ga. (.065”)
14 ga. (.083”)
2-1/4" 2.250 57.2 3, 9, 12, 15, 17, 24, 30, 36, 48 4½"
11 ga. (.120”)
2" 2.375 60.2 6, 7½, 9, 10, 12, 15, 17, 24, 30, 36, 48 4"
2-1/2" 2.500 63.5 4, 6, 9, 12, 15, 17, 24, 30, 36, 48 5" Iron Pipe Size (IPS):
2-3/4" 2.750 69.9 9, 12, 17, 30, 36, 48 5½" Sch 5
Sch 10
2-1/2" 2.875 73.0 9, 12, 12½, 15, 17, 24, 30, 36, 48, 60 5"
Sch 40
3" 3.000 76.2 4½, 7½, 9, 10, 12, 15, 18, 24, 30, 36, 48, 52, 60 6" Other wall thicknesses
3-1/4" 3.250 82.6 17, 30, 36 6½" upon request.
3-1/2" 3" 3.500 88.9 6, 8¾, 9, 12, 15, 16, 18, 20, 24, 30, 36, 48 7" (6" - pipe) Standard
3-3/4" 3.750 95.3 17, 24, 30, 36 7½" Materials of
4" 3-1/2" 4.000 101.6 6, 10,12, 16, 18, 20, 24, 30, 32, 36, 48, 60 8" (7" - pipe) Construction:
4-1/4" 4.250 107.9 16, 30, 36, 48, 60 8½" Aluminum:
6063-T1 extruded
4-1/2" 4" 4.500 114.3 6, 10, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 9" (8" - pipe) Stainless Pipe:
4-3/4" 4.750 120.7 24, 36, 48, 60, 72 9½" T304 ASTM A312
5" 5.000 127.0 9, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 10" Stainless Tube:
5-1/2" 5.500 139.7 24, 30, 36, 42, 48, 60, 72 11" T304 ASTM A249
Carbon Steel Pipe:
5" 5.563 114.3 15, 20, 24, 30, 36, 42, 48, 60, 72 10" ASTM A53
6" 6.000 152.4 9, 15, 18, 24, 30, 36, 42, 48, 60, 72 12" Carbon Steel Tubing:
6" 6.625 168.2 18, 24, 30, 36, 48, 60, 72 12" ASTM A513
8" 8.000 203.2 12, 20, 48, 60, 72 16" Galvanized Pipe:
ASTM A53
8" 8.625 219.1 24, 32, 40, 48, 60, 72 16"
Galvanized Tubing:
10" 10.75 273.1 40, 50 20" ASTM A513

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -2- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
KICE STOCK FORMED LONG SWEEP TUBE ELBOWS
Smooth bore, formed long radius 45o and 90o elbows in Aluminum or Steel. Stocked in sizes 2”OD through 8”OD.
Stainless Steel available on special order. Additional sizes, gauges, and angles available upon request.

o
Formed Long Sweep 90 Tube Elbows
T
Elbows are die formed to prevent egg-shape cross section.
Special angles may be cut - either on the job or by Kice when
specified. Stocked centerline radii, materials, and wall D
thicknesses shown below. Call for special requirements.
90°

CENTERLINE RADII STEEL ALUMINUM T


ANGLE D (OD)
2'-0" 3'-0" 4'-0" (STD GA.) (STD GA.) (nominal)
2 2A2 - 90 3A2 - 90 4A2 - 90 16 or 11 .050" (18 ga) 4
CLR
2½ 2A2½ - 90 3A2½ - 90 4A2½ - 90 16 or 11 .050" (18 ga) 5
3 2A3 - 90 3A3 - 90 4A3 - 90 16 or 11 .065" (16 ga) 6
3½ 2A3½ - 90 3A3½ - 90 4A3½ - 90 16 or 11 .065" (16 ga) 7
o 4 2A4 - 90 3A4 - 90 4A4 - 90 16 or 11 .065" (16 ga) 8
90 4½
5
-----
-----
3A4½ - 90
3A5 - 90
-----
4A5 - 90
14 or 11
14 or 11
.083" (14 ga)
.083" (14 ga)
9
10
T

5½ ----- 3A5½ - 90 ----- 14 or 11 .083" (14 ga) 11


6 ----- 3A6 - 90 4A6 - 90 14 or 11 .083" (14 ga) 12
8 ----- ----- 4A8 - 90 14 or 11 .120" (11 ga) 16
"A" in part number specifies Aluminum material. Specify "B" for Steel and "S" for 304L Stainless Steel.
Not all sizes available in all materials or centerlines. Other centerlines and gauges available. “A” = Aluminum
Due to the manufacturing processes, overall tangent length may vary.
To determine Kice part number = Centerline-Material-Size-Bend Degree-Gauge.
“B” = Steel
o
Example: Kice PN 4A5-90-14 = 4' (48") centerline, Aluminum, 5"OD, 90 elbow, .083" (14 ga.) wall “S” = 304 Stainless Steel

o
Formed Long Sweep 45 Tube Elbows
T Elbows are die formed to prevent egg-shape cross section.
Special angles may be cut - either on the job or by Kice when
specified. Stocked centerline radii, materials, and wall
thicknesses shown below. Call for special requirements.
45°
CENTERLINE RADII STEEL ALUMINUM T
ANGLE D (OD)
CLR 2'-0" 3'-0" 4'-0" (STD GA.) (STD GA.) (nominal)
2 2A2 - 45 3A2 - 45 4A2 - 45 16 or 11 .050" (18 ga) 4
2½ 2A2½ - 45 3A2½ - 45 4A2½ - 45 16 or 11 .050" (18 ga) 5
T 3 2A3 - 45 3A3 - 45 4A3 - 45 16 or 11 .065" (16 ga) 6
3½ 2A3½ - 45 3A3½ - 45 ----- 16 or 11 .065" (16 ga) 7
D o 4 2A4 - 45 3A4 - 45 4A4 - 45 16 or 11 .065" (16 ga) 8
45 4½
5
-----
-----
3A4½ - 45
3A5 - 45
-----
4A5 - 45
14 or 11
14 or 11
.083" (14 ga)
.083" (14 ga)
9
10
5½ ----- 3A5½ - 45 4A5½ - 45 14 or 11 .083" (14 ga) 11
6 ----- 3A6 - 45 4A6 - 45 14 or 11 .083" (14 ga) 12
8 ----- ----- 4A8 - 45 14 or 11 .120" (11 ga) 16
"A" in part number specifies Aluminum material. Specify "B" for Steel and "S" for 304L Stainless Steel.
“A” = Aluminum Not all sizes available in all materials or centerlines. Other centerlines and gauges available.
Due to the manufacturing processes, overall tangent length may vary.
“B” = Steel To determine Kice part number = Centerline-Material-Size-Bend Degree-Gauge.
“S” = 304 Stainless Steel o
Example: Kice PN 3B4-45-11 = 3' (36") centerline, Steel, 4"OD, 45 elbow, 11 ga. wall

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -3- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
FLAT BACK ELBOWS - WELDED & BOLTED ON BACKS
Long wearing Flat Back elbows available in Steel in sizes 2” through 12”OD. Standard angles include 30O, 45O, 60O, and 90O.
Flat Back Elbows with extended tangents (FT & GT) also available. Additional sizes, gauges, and angles available upon request.

o o o o
Flat Back 30 , 45 , 60 , and 90 Elbows

TYPE “F” TYPE “G” D


ALL WELDED 3/16” THICK AR 3/16” THICK AR STEEL
CONSTRUCTION STEEL BACK BOLT ON REPLACEABLE BACK

L RADIUS

D x .8125 D x .8125 T
10 GA. MILD STEEL 10 GA. MILD STEEL
(SIDE & THROAT) (SIDE & THROAT) 60°
90°

D D
45°
30°
APPROXIMATE BACKLINE RADII
ANGLE D (OD) L T
2'-0" 3'-0" 4'-0"
2 2F2 - 90 3F2 - 90 4F2 - 90 4 3 WELDED CONNECTION (TYPE “F”)
FLANGED CONNECTION (TYPE “G”)
2½ 2F2½ - 90 3F2½ - 90 4F2½ - 90 4¼ 3 (2 LOCATIONS)
3 2F3 - 90 3F3 - 90 4F3 - 90 4½ 3 D
4 2F4 - 90 3F4 - 90 4F4 - 90 5 3
o Flat Back elbows are recommended where
90 5
6
8
2F5 - 90
2F6 - 90
2F8 - 90
3F5 - 90
3F6 - 90
3F8 - 90
4F5 - 90
4F6 - 90
4F8 - 90
7
9
12
3
3
4
wear is a problem. Flat Back elbows, like their
name implies, have a flat, wide back to spread
wear. The cross section area of the elbow is
10 2F10 - 90 3F10 - 90 4F10 - 90 12 4 equal to the area of the collar. Kice Flat Back
12 2F12 - 90 3F12 - 90 4F12 - 90 18 6 elbows are manufactured with 10 ga. Steel
2 4 3
sides and throat and 3/16” thick AR (Abrasion
2F2 - 60 3F2 - 60 4F2 - 60
Resistant) Steel back. This special alloy
2½ 2F2½ - 60 3F2½ - 60 4F2½ - 60 4¼ 3 outlasts ordinary steel up to 200%. Transitions
3 2F3 - 60 3F3 - 60 4F3 - 60 4½ 3 back to round OD collars are 11 ga. carbon
4 2F4 - 60 3F4 - 60 4F4 - 60 5 3 steel.
o
60 5
6
8
2F5 - 60
2F6 - 60
2F8 - 60
3F5 - 60
3F6 - 60
3F8 - 60
4F5 - 60
4F6 - 60
4F8 - 60
7
9
12
3
3
4
Flat Back elbows are fabricated per order and
can be supplied in almost any size, radius,
and/or angle. Our standardized list is shown
10 2F10 - 60 3F10 - 60 4F10 - 60 12 4 on the left.
12 2F12 - 60 3F12 - 60 4F12 - 60 18 6
2 2F2 - 45 3F2 - 45 4F2 - 45 4 3 TYPE “F” - The AR Steel back and
2½ 2F2½ - 45 3F2½ - 45 4F2½ - 45 4¼ 3 transitions are solidly welded to throat
3 2F3 - 45 3F3 - 45 4F3 - 45 4½ 3 and side plates. The back can be
4 2F4 - 45 3F4 - 45 4F4 - 45 5 3 replaced by welding. This is the most
o practical flat back elbow.
45 5
6
8
2F5 - 45
2F6 - 45
2F8 - 45
3F5 - 45
3F6 - 45
3F8 - 45
4F5 - 45
4F6 - 45
4F8 - 45
7
9
12
3
3
4
TYPE “G” - The AR Steel back and
transitions are fastened by bolts and
10 2F10 - 45 3F10 - 45 4F10 - 45 12 4 flanges, and sealed with caulking.
12 2F12 - 45 3F12 - 45 4F12 - 45 18 6 Replacement involves unbolting, cutting
2 2F2 - 30 3F2 - 30 4F2 - 30 4 3 and drilling new back, then bolting it
2½ 2F2½ - 30 3F2½ - 30 4F2½ - 30 4¼ 3 back in place. Leakage may be a
3 2F3 - 30 3F3 - 30 4F3 - 30 4½ 3 problem.
4 2F4 - 30 3F4 - 30 4F4 - 30 5 3
o 5 7 3
30 6
8
2F5 - 30
2F6 - 30
2F8 - 30
3F5 - 30
3F6 - 30
3F8 - 30
4F5 - 30
4F6 - 30
4F8 - 30
9
12
3
4
Flat Back Elbows Options.
Call Kice for price and delivery.
10 2F10 - 30 3F10 - 30 4F10 - 30 12 4
• Kice Flat Back Elbows are also
12 2F12 - 30 3F12 - 30 4F12 - 30 18 6
available in 5’, 6’, 7’, and 8’ backline
Available in Steel only. "F" is Welded Style, "G" is Bolted On Style. radii.
“F” in part number specifies Welded Back style. “G” specifies Bolted On Back style. • Replacement Backs and Transitions for
Flat back elbows measured along backline, not centerline. Not directly interchangeable with
formed elbows. To determine Kice part number = Backline-Style-Size-Bend Degree.
“G” Type Elbows are available.
Example: Kice PN 3F4-90 = 3' (36") backline, Steel, Type “F" Welded back, 4"OD, 90o elbow. • Ceramic Lined Flat Back Elbows

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -4- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
EXTENDED TANGENT “T” SERIES FLAT BACK ELBOWS
Flat Back Elbows with extended discharge tangent (FT & GT) available in Steel in sizes 2” through 12”OD.
Standard angles include 30O, 45O, 60O, and 90O. Additional sizes, gauges, and angles available upon request.

o o o o
Extended Tangent “T” Series Flat Back 30 , 45 , 60 , and 90 Elbows

TYPE “F” TYPE “G” D FLOW


ALL WELDED 3/16” THK AR 3/16” THICK AR STEEL
CONSTRUCTION STEEL BACK BOLT ON REPLACEABLE BACK

L C RADIUS

D x .8125 D x .8125 T
10 GA. MILD STEEL 10 GA. MILD STEEL
(SIDE & THROAT) (SIDE & THROAT) 60°
90°

D D
45°
30°
APPROX. BACKLINE RADII
ANGLE D (OD) L T C
3'-0" 4'-0"
2 3FT2 - 90 4FT2 - 90 4 3 18 WELDED CONNECTION (TYPE “FT”)
FLANGED CONNECTION (TYPE “GT”)
2½ 3FT2½ - 90 4FT2½ - 90 4¼ 3 18 (2 LOCATIONS)
3 3FT3 - 90 4FT3 - 90 4½ 3 18 D
4 3FT4 - 90 4FT4 - 90 5 3 18
o
90 5
6
8
3FT5 - 90
3FT6 - 90
3FT8 - 90
4FT5 - 90
4FT6 - 90
4FT8 - 90
7
9
12
3
3
4
18
18
24
Kice “T” series extended discharge
tangent Flat Back Elbows are available on
both standard Kice “F” and “G” Flat Back
10 3FT10 - 90 4FT10 - 90 12 4 24 elbows . The extended tangent on the
12 3FT12 - 90 4FT12 - 90 18 6 24
discharge end protects the discharge
transition from wear as the conveyed
2 3FT2 - 60 4FT2 - 60 4 3 18 material comes off the flattened bend. Kice
2½ 3FT2½ - 60 4FT2½ - 60 4¼ 3 18 “T” series Flat Back elbows are marked
3 3FT3 - 60 4FT3 - 60 4½ 3 18 with a directional arrow and available in
4 3FT4 - 60 4FT4 - 60 5 3 18 3’0” & 4’0” backline radii.
o
60 5
6
8
3FT5 - 60
3FT6 - 60
3FT8 - 60
4FT5 - 60
4FT6 - 60
4FT8 - 60
7
9
12
3
3
4
18
18
24
Like the standard Flat Back elbows, they are
recommended where wear is a problem. Flat
Back elbows, like their name implies, have a
10 3FT10 - 60 4FT10 - 60 12 4 24 flat, wide back to spread wear. The cross
12 3FT12 - 60 4FT12 - 60 18 6 24 section area of the elbow is equal to the area of
2 3FT2 - 45 4FT2 - 45 4 3 18 the collar. Kice Flat Back elbows are
2½ 3FT2½ - 45 4FT2½ - 45 4¼ 3 18
manufactured with 10 ga. Steel sides and
throat and 3/16” thick AR (Abrasion Resistant)
3 3FT3 - 45 4FT3 - 45 4½ 3 18 Steel back. This special alloy outlasts ordinary
4 3FT4 - 45 4FT4 - 45 5 3 18 steel up to 200%. Transitions back to round
o
45 5
6
8
3FT5 - 45
3FT6 - 45
3FT8 - 45
4FT5 - 45
4FT6 - 45
4FT8 - 45
7
9
12
3
3
4
18
18
24
OD collars are 11 ga. carbon steel.
Flat Back elbows are fabricated per order and
10 3FT10 - 45 4FT10 - 45 12 4 24 can be supplied in almost any size, radius,
12 18 6 24
and/or angle. Our standardized list is shown
3FT12 - 45 4FT12 - 45
on the left.
2 3FT2 - 30 4FT2 - 30 4 3 18
2½ 3FT2½ - 30 4FT2½ - 30 4¼ 3 18
3 3FT3 - 30 4FT3 - 30 4½ 3 18 TYPE “F” - The AR Steel back and
4 3FT4 - 30 4FT4 - 30 5 3 18 transitions are solidly welded to throat
o 5 7 3 18 and side plates. The back can be
30 6
8
3FT5 - 30
3FT6 - 30
3FT8 - 30
4FT5 - 30
4FT6 - 30
4FT8 - 30
9
12
3
4
18
24
replaced by welding. This is the most
practical flat back elbow.
10 3FT10 - 30 4FT10 - 30 12 4 24 TYPE “G” - The AR Steel back and
12 3FT12 - 30 4FT12 - 30 18 6 24 transitions are fastened by bolts and
flanges, and sealed with caulking.
Available in Steel only. "FT" is Welded Style, "GT" is Bolted On Style. Replacement involves unbolting, cutting
“FT” in part number specifies Welded Back style. “GT” specifies Bolted On Back style. and drilling new back, then bolting it
Flat back elbows measured along backline, not centerline. Not directly interchangeable with back in place. Leakage may be a
formed elbows. To determine Kice part number = Backline-Style-Size-Bend Degree. problem.
Example: Kice PN 3FT4-90 = 3' backline, Steel, Type “FT" Welded back, 4"OD, 90o elbow.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -5- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 11 & 12 ELBOWS
Short radius elbows for gravity spouting. See items for specific description.

#11 Free Flow Cast Elbows #12 Rotajust Elbows


Available in all angles
D
from 5o to 45o in 5o increments,
in three diameters, 4”, 5”
and 6” OD, and two materials T 10O
- cast aluminum and cast iron. R = 1”
A total of 36 single piece
elbows plus the six Rotajust
elbows - A total of 42
Y Adjustable from
coordinated types and sizes to
handle practically any gravity
ANGLE 0O to 60O
flow job.

Smoothly curved surfaces


inside and out assure good T 5/32” TYP
stock flow and excellent 1/16”
sanitation. No segment angles • Machined surfaces of two identical halves are drawn tightly
or rough joints. together by stainless steel clamp when set at the required
Note: Wall in curved area is double angle.
thickness for extra wear protection • Diameters match US Standard Tube OD in 4", 5", 6” and
8"OD.
ALUMINUM CAST IRON • Available in Aluminum alloy and Cast Grey Iron
SKETCH ANGLE D Y T • Aluminum never rusts, is lightweight, excellent
PART NO. PART NO.
appearance, very smooth internal surface for stock flow
4 4½ 1½ 11A4-05 --- and weldable.
5° 5 5½ 2 11A5-05 --- • Cast Grey Iron is very wear resistant.
6 6½ 2½ 11A6-05 --- • Formed with double thickness wall in curved area for extra
4 4½ 1½ wearability.
11A4-10 ---
• Smooth full round curved ends - no angular segments.
10° 5 6 2 11A5-10 --- • Joins to tube and/or other fittings with single band clamp
6 6¾ 2½ 11A6-10 --- couplings or compression couplings.
4 4¾ 1½ 11A4-15 11B4-15 • Banded butt joints are machined smooth and sanitary.
15° 5 6 2 11A5-15 11B5-15
D STAINLESS STEEL CLAMP
6 7 2½ 11A6-15 11B6-15 RING WITH #10-24 BOLT & NUT

4 5 1½ 11A4-20 ---
T
20° 5 6½ 2 11A5-20 --- R = 1”

6 7¼ 2½ 11A6-20 --- Y
L
4 5¼ 1½ 11A4-25 ---
ANGLE
25° 5 6½ 2 11A5-25 ---
6 7½ 2½ 11A6-25 ---
4 5¼ 1½ 11A4-30 11B4-30 T MACHINED SURFACES
F (OFFSET)
30° 5 6¾ 2 11A5-30 11B5-30 5/32” TYP (NOTE: EXTRA
THICKNESS AT BEND
1/16”
6 7½ 2½ 11A6-30 11B6-30
SHOWN AT ROTATED TO
4 5 1½ 11A4-35 --- MAXIMUM ANGLE - 60O MINIMUM ANGLE - 0O
35° 5 6¼ 2 11A5-35 ---
6 8 2½ 11A6-35 --- Part No. Dimensions
4 5½ 2 11A4-40 --- Aluminum Cast Iron D (OD) L B Y F
40° 5 6¾ 2½ 11A5-40 --- 12A4 12B4 4 7¼ 2 6 1/8 7/8
6 7 7/8 2¾ 11A6-40 --- 12A5 12B5 5 8¾ 2½ 7 1/8 1
4 5 5/8 2 11A4-45 11B4-45 12A6 12B6 6 10¼ 3 8 1/8 1 1/8
45° 5 6¾ 2½ 11A5-45 11B5-45 ----- 12B8 8 12 4 9¾ 1¾
6 8 3 11A6-45 11B6-45 "A" in part number specifies Aluminum material.
"---" indicates not available in Cast Iron Specify "B" for Cast Iron. Cast Iron only in 8"OD.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -6- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 14 SHORT RADIUS “RIKER” ELBOWS
Smooth bore, formed short radius 45o and 90o elbows in Aluminum or Steel. Stocked in sizes 2”OD through 8”OD.
Stainless Steel available on special order. Additional sizes, gauges, and angles available upon request.

#14 Short Radius Formed 90o elbows


Kice short radius, 16 ga., “Riker” formed 90o elbows are
available in Aluminum and Steel. Kice stocks sizes 2”OD
through 8”OD. Centerline radius dimensions vary from size to
B
size. Used primarily for dust control, vacuum sweeper
systems, and clean air applications. Series 14 elbows are
supplied when Kice Dust Duct ET and ER elbows requested in
sizes 6”OD and below in Aluminum and 8”OD and below in
carbon steel.
90°
Part No. D (OD) B
B
14A2-90 2 11
14A2½-90 2½ 10¾
14A3-90 3 10½
14A3½-90 3½ 10¼
14A4-90 4 10
14A4½-90 4½ 13¼ D
14A5-90 5 13
14A5½-90 5½ 20
14A6-90 6 17
14B7-90 7 22½
14B8-90 8 26
"A" in part number specifies Aluminum material. Note: Centerline radius and tangent length
Specify "B" for Steel. Steel only in 7"OD and 8"OD. may vary due to manufacturing tolerances.

o
#14 Short Radius Formed 45 elbows

X
Kice short radius, 16 ga., “Riker” formed 45o elbows are available in
Aluminum and Steel. Kice stocks sizes 2”OD through 8”OD. Centerline
radius dimensions vary from size to size. Used primarily for dust control,
vacuum sweeper systems, and clean air applications. Series 14 elbows
are supplied when Kice Dust Duct ET and ER elbows requested in sizes
6”OD and below in Aluminum and 8”OD and below in carbon steel.

Part No. D (OD) X Y


45° Y 14A2-45 2 5¾ 13½
14A2½-45 2½ 6½ 16
14A3-45 3 6½ 15½
14A3½-45 3½ 6½ 16
14A4-45 4 6½ 15
14A4½-45 4½ 7½ 17
14A5-45 5 8½ 20¾
14A5½-45 5½ 11½ 26½
D 14A6-45 6 11½ 26½
14B7-45 7 16 38
14B8-45 8 12½ 30
Note: Centerline radius and tangent length "A" in part number specifies Aluminum material.
may vary due to manufacturing tolerances. Specify "B" for Steel. Steel only in 7"OD and 8"OD.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -7- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SPECIAL LONG SWEEP TUBE ELBOWS & SAND-T ELLS
Kice purchases many special smooth bore, formed long radius elbows and manufacturers several other
fabricated flat back and shell back elbows for your special requirements. Hard ceramic is commonly applied
to these fittings for extended wear life. Materials include Aluminum, Steel, and/or Stainless Steel.
In addition, Kice offers a Sand-T Ell designed to provide long life for a low price.

OUTER STEEL CERAMIC


Cerathane™ Backed Long Sweep Tube Elbows SHELL BACK COMPOUND

Kice manufacturers a series of Cerathane™ (ceramic and urethane


compound) backed long sweep elbows from standard long sweep elbows.
Kice “Shellback Ells” have a Cerathane™ backing and abrasion resistant
shell. Standard Kice “Shellback” Ells are available 90O and 45O with a 3’ or 4’
centerline radius in Tube OD sizes: 2”, 2½”, 3”, 4”, 5”, 6” and 8”. Other sizes
and degrees are available upon request; Call for detail and/or special STEEL ELBOW
requirements. CROSS SECTION

Ceramic Backed Flat Back Elbows


Kice manufacturers a series of ceramic backed, long sweep, flat back and
extended tangent flat back elbows similar to our standard Flat Back elbows.
Kice “Survive Ells” have a ¼” thick ceramic back along the wear area of a Flat
Back elbow. Standard Kice Survive Ells are available 45O and 90O with a 3’
SURVIVE ELL
CERAMIC BACK backline radius in OD tube sizes 2”, 2½”, 3”, 4”, 5”, 6” and 8”, and have a bolt-on
throat and bolt-on replaceable transitions. Other sizes and degrees are
available upon request; Call for special requirements.

CERAM-BACK Fittings
Another Kansas manufacturer, working with Kice Industries, manufacturers a
full line of CERAM-BACK ceramic back and ceramic lined fittings, including
long sweep elbows, flat back elbows, short radius elbows, bifurcated bends,
TY’s, laterals, transitions, offsets, and other formed and fabricated fittings.
These fittings have a ceramic compound over the fittings, wrapped with a
ceramics/fiberglass reinforcement to maintain exterior hoop strength. Call
Kice Industries for quotes on CERAM-BACK fittings.

Kice Sand-T Ells


STOCK OUT
B
Kice Sand-T Ells are designed for material-on-material
impact to protect internal steel surfaces from abrasion and
C wear at a turn. Ells ends couple directly to an OD Tube.

B D (OD) B C E
2 5½ 3 9½
STOCK IN 2½ 6 3 10½
D 3 6 3/8 3 11¾
PIPE CAP
4 7 1/8 3 13¾
5 7 7/8 3 15¾
STRAIGHT TEE
6 8 5/8 3 17¾
C
E
8 11 3 22
Kice 90o Sand Ell shown 10 13½ 3 27
12 16 3 32
Note: 45o degree Sand-T Ell available upon special request. Available in Carbon Steel only.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -8- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 25/26M/26F ADAPTERS
Adapter fittings are available from stock in Aluminum or Steel. Stainless Steel available on special order. Standard material
thickness is 16 ga. Fittings are butt welded without laps. Additional sizes, designs, gauges, and angles available upon request.

#25 Tube OD to Tube OD Reducing Adapter


L

For connecting different sizes of OD tubing.


Note: Prior to October 2000, the overall
D O
length was 10” with 2” long tangents.
Current design can be cut down in field by
1” on each end to match old standard.
T
T

Part No. D (OD) O (OD) L T Part No. D (OD) O (OD) L T


25A1½-2 1½ 2 12 3 25A3½-4 3½ 4 12 3
25A2-2½ 2 2½ 12 3 25A3½-5 3½ 5 12 3
25A2-3 2 3 12 3 25A4-4½ 4 4½ 12 3
25A2-4 2 4 12 3 25A4-5 4 5 12 3
25A2½-3 2½ 3 12 3 25A4-6 4 6 12 3
25A2½-4 2½ 4 12 3 25A4½-5 4½ 5 12 3
25A3-3½ 3 3½ 12 3 25A5-5½ 5 5½ 12 3
25A3-4 3 4 12 3 25A5-6 5 6 12 3
25A3-4½ 3 4½ 12 3 25A5½-6 5½ 6 12 3
25A3-5 3 5 12 3 25A5-8 5 8 12 3
25A3-6 3 6 12 3 25A6-8 6 8 12 3
滘A" in part number specifies Aluminum material. Specify "B" for Steel and "S" for 304L Stainless Steel. Call out smaller size first
in part number. Some sizes may not be available in Aluminum. OD tubing-to-Metric OD tubing available on special order.

#26M Tube OD to NPT-Male Adapter #26F Tube OD to NPT-Female Adapter


L
L

D D

O (NPT - Male) O (NPT - Female)

Part No. D (OD) O L Part No. D (OD) O L


26MA2-2 2 2" NPT - Male 8 26FA2-2 2 2" FPT - Female 8
26MA2½-2½ 2½ 2½" NPT - Male 8 26FA2½-2½ 2½ 2½" FPT - Female 8
26MA3-3 3 3" NPT - Male 8 26FA3-3 3 3" FPT - Female 8
26MA4-4 4 4" NPT - Male 8 26FA4-4 4 4" FPT - Female 8
26MA5-5 5 5" NPT - Male 8 26FA5-5 5 5" FPT - Female 8
26MA6-6 6 6" NPT - Male 8 26FA6-6 6 6" FPT - Female 8
"A" in part number specifies Aluminum material. "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel. Specify "B" for Steel and "S" for 304L Stainless Steel.

For connecting OD tubing to Female For connecting OD tubing to Male


Pipe Thread (NPT - Female). Pipe Thread (NPT - Male).
Reducing sizes available as special order. Reducing sizes available as special order.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -9- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 27/28/29 ADAPTERS
Adapter fittings are available from stock in Aluminum or Steel. Stainless Steel available on special order. Standard material
thickness is 16 ga. Fittings are butt welded without laps. Additional sizes, designs, gauges, and angles available upon request.

#27 Tube OD to Metric Tube Adapter Kice manufactures many special fittings for
L
customers and welcomes your inquiries.
Other fittings we manufacture, but are not
shown, include crosses, TY’s, welded
D A
manifolds, and special angles, lengths,
materials, and wall thicknesses. Contact Kice
Industries for pricing information.

For connecting OD tubing to Metric tubing. For detailed


Specify Tube OD and wall thickness and information on
Metric Tube OD and wall thickness Kice Industrial
Part No. D (OD) A L
Filters, request
27A2- 2 Specify 8 Kice Data Sheet
27A2½- 2½ Specify 8 IF-1.“Proven
27A3- 3 Specify 8 technology
27A4- 4 Specify 8
27A5- 5 Specify 8
and
27A6- 6 Specify 8 innovative
"A" in part number specifies Aluminum material. design.”
Specify "B" for Steel and "S" for 304L Stainless Steel.

#28 Tube OD to Flange Adapter #29 Tube OD to ANSI 150# Flange Adapter
L
L

For connecting
OD tubing to
flange or for mating For connecting
to floor D
OD tubing to D BC O
O
standard ANSI
Bolt holes drilled 150# flange
when specified.

1/8” thick flange is standard, 3/16” and Standard tube construction is


1/4” thick available on special order. 11 ga. steel. Reducing sizes
Reducing sizes also available. 1/8” also available. 1/4”

Part No. D (OD) L O Thk Bolt Circle (BC) Part No. D (OD) L O Thk # of Holes, Dia. & BC
28A3 3 4 6 1/8" Undrilled/Blank 29B3 3 4 7½ 1/4" 4 ea. 3/4" on 6" BC
28A4 4 4 7 1/8" Undrilled/Blank 29B4 4 4 9 1/4" 8 ea. 3/4" on 7½" BC
28A5 5 4 8 1/8" Undrilled/Blank 29B5 5 4 10 1/4" 8 ea. 7/8" on 8½" BC
28A6 6 4 9 1/8" Undrilled/Blank 29B6 6 4 11 1/4" 8 ea. 7/8" on 9½" BC
28A8 8 4 11 1/8" Undrilled/Blank 29B8 8 4 13½ 1/4" 8 ea. 7/8" on 11¾" BC
"A" in part number specifies Aluminum material. "B" in part number specifies Steel material. Specify "S" for
Specify "B" for Steel and "S" for 304L Stainless Steel. 304L Stainless Steel. Aluminum available on special order.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -10- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 31/32/33 TRANSITIONS
Square-to-Round transition fittings Kice stock in Aluminum or Steel. All joints butt welded without laps. Standard material thickness
is 16 ga. with 1” wide x .083” (14 ga.) thick flange; not drilled. Additional sizes, flange widths, and materials available upon request.

#31 Square-to-Round Transition #32 Square-to-Round Transition


with straight collar with 30o collar
S (SQUARE) 1”
1” S (SQUARE)

L
T
T

D
D 30°

Part No. D (OD) S T L Part No. D (OD) S T Y


31A3-4 3 4 2 6 32A3-4 3 4 2 4
31A4-4 4 4 2 6 32A4-4 4 4 2 4
31A4-5 4 5 2 6 32A4-5 4 5 2 4
31A4-6 4 6 2 6 32A4-6 4 6 2 4
31A4-8 4 8 2 6 32A4-8 4 8 2 4
31A5-5 5 5 2½ 6½ 32A5-5 5 5 2½ 4
31A5-6 5 6 2½ 6½ 32A5-6 5 6 2½ 4
31A5-8 5 8 2½ 6½ 32A5-8 5 8 2½ 4
31A6-6 6 6 3 7 32A6-6 6 6 3 4
31A6-8 6 8 3 7 32A6-8 6 8 3 4
31A8-8 8 8 4 8 32A8-8 8 8 4 4
"A" in part number specifies Aluminum material. "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel. Specify "B" for Steel and "S" for 304L Stainless Steel.

#33 Square-to-Round Transition Kice can supply Series 31, 32, 33, 34, 35, and
o
with 45 collar 36 transitions to match Kice Airlock flanges:
S (SQUARE) 1”
(Includes 1/4” thick flange, drilled to match Kice Airlock Flange)
For Round Kice Flange specify:
Y “to match Kice VJ Airlock, Ref. DWG 1-4392A”
T For Square Kice Flange specify:
“to match Kice VJ Airlock, Ref. DWG 1-4391A”
D

45°
For more information
Part No. D (OD) S T Y on Kice Cyclone
33A3-4 3 4 2 4
33A4-4 4 4 2 4
Collectors, request
33A4-5 4 5 2 4 Kice Data Sheet
33A4-6 4 6 2 4
33A4-8 4 8 2 4
CY-3.
33A5-5
33A5-6
5
5
5
6


4
4
“High efficiency,
33A5-8 5 8 2½ 4 large range of
33A6-6 6
6
6
8
3
3
4
4
sizes, and
33A6-8
33A8-8 8 8 4 4 variety of
"A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel.
options.”

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -11- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 34/35/36 TRANSITIONS
Round-to-Round transition fittings Kice stock in Aluminum or Steel. All joints butt welded without laps. Standard material thickness
is 16 ga. with ¾” wide x .083” (14 ga.) thick flange; not drilled. Additional sizes, flange widths, and materials available upon request.

#34 Round-to-Round Transition #35 Round-to-Round Transition


with straight collar with 30o collar
3/4” R (ROUND) R (ROUND) 3/4”

L
T

D 30°
D

Part No. D (OD) R T L Part No. D (OD) R T Y


34A3-4 3 4 2 6 35A3-4 3 4 2 4
34A4-4 4 4 2 6 35A4-4 4 4 2 4
34A4-5 4 5 2 6 35A4-5 4 5 2 4
34A4-6 4 6 2 6 35A4-6 4 6 2 4
34A4-8 4 8 2 6 35A4-8 4 8 2 4
34A5-5 5 5 2½ 6½ 35A5-5 5 5 2½ 4
34A5-6 5 6 2½ 6½ 35A5-6 5 6 2½ 4
34A5-8 5 8 2½ 6½ 35A5-8 5 8 2½ 4
34A6-6 6 6 3 7 35A6-6 6 6 3 4
34A6-8 6 8 3 7 35A6-8 6 8 3 4
34A8-8 8 8 4 8 35A8-8 8 8 4 4
"A" in part number specifies Aluminum material. "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel. Specify "B" for Steel and "S" for 304L Stainless Steel.

#36 Round-to-Round Transition Kice can supply Series 31, 32, 33, 34, 35, and
o
with 45 collar 36 transitions to match Kice Airlock flanges:
R (ROUND) 3/4”
(Includes 1/4” thick flange, drilled to match Kice Airlock Flange)
For Round Kice Flange specify:
Y “to match Kice VJ Airlock, Ref. DWG 1-4392A”
T For Square Kice Flange specify:
“to match Kice VJ Airlock, Ref. DWG 1-4391A”
D

45°
“Particle separation
Part No. D (OD) R T Y using terminal
36A3-4 3 4 2 4
36A4-4 4 4 2 4 velocity”
36A4-5 4 5 2 4 Translation:
36A4-6 4 6 2 4
36A4-8 4 8 2 4
separation and
36A5-5 5 5 2½ 4 classification
36A5-6 5 6 2½ 4
36A5-8 5 8 2½ 4
up to 99%
36A6-6 6 6 3 4 efficient that
36A6-8
36A8-8
6
8
8
8
3
4
4
4
is proven and
"A" in part number specifies Aluminum material. economical.
Specify "B" for Steel and "S" for 304L Stainless Steel.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -12- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 41/42/43/44 BRANCH FITTINGS
Tube OD Branch fittings are Kice stock in Aluminum or Steel. Stainless Steel available on special order. Fittings are mitered
and butt welded without laps. Standard material thickness is 16 ga. Additional sizes, designs, gauges, and angles upon request.

o o
#41 Single “Y” Branch with 30 leg #42 Single “Y” Branch with 45 leg
30° 45°
D
D

E E
F
F

G G

D D

Part No. D (OD) E F G Part No. D (OD) E F G


41A3 3 12 7½ 3 42A3 3 12 6 3
41A4 4 16 10 4 42A4 4 14 8 4
41A5 5 20 12½ 5 42A5 5 17 10 5
41A6 6 24 15 6 42A6 6 21 12 6
41A8 8 30 21 7 42A8 8 30 16¼ 8
"A" in part number specifies Aluminum material. "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel. Specify "B" for Steel and "S" for 304L Stainless Steel.

#43 Double “Y” Branch #44 Double “Y” Branch


o o
with 2 each 30 legs with 2 each 45 legs
30° 30° 45° 45°
D D

D D

E
F
E
F

G G

D D

Part No. D (OD) E F G Part No. D (OD) E F G


43A3 3 12 7½ 3 44A3 3 12 6 3
43A4 4 16 10 4 44A4 4 14 8 4
43A5 5 20 12½ 5 44A5 5 17 10 5
43A6 6 24 15 6 44A6 6 21 12 6
43A8 8 30 21 7 44A8 8 30 16¼ 8
"A" in part number specifies Aluminum material. "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel. Specify "B" for Steel and "S" for 304L Stainless Steel.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -13- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 45/46/47 BRANCH FITTINGS
Tube OD Branch fittings are Kice stock in Aluminum or Steel. Stainless Steel available on special order. Fittings are mitered
and butt welded without laps. Standard material thickness is 16 ga. Additional sizes, designs, gauges, and angles upon request.

#45 Symmetrical “Y” Branch with #46 Symmetrical “Y” Branch with
each leg 30o from center each leg 45o from center
30° 30°
45° 45°
D D

D D

F
F

G
G

D
D

Part No. D (OD) F G Part No. D (OD) F G


45A3 3 5 3 46A3 3 4½ 3
45A4 4 6 4 46A4 4 6 4
45A5 5 7½ 5 46A5 5 7½ 5
45A6 6 9 6 46A6 6 9 6
45A8 8 10 4 3/8 46A8 8 9 6
"A" in part number specifies Aluminum material. "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel. Specify "B" for Steel and "S" for 304L Stainless Steel.

#47 Single “T” Branch with 90o leg Kice manufactures many special fittings for
customers and welcomes your inquiries.
D G Other fittings we manufacture, but are not
shown, include crosses, TY’s, welded
manifolds, and special angles, lengths,
G
F materials, and wall thicknesses. Contact Kice
Industries for pricing information.
E D
For detailed
G
information on Kice
Diverter, Bin Fill,
F
and Slide Gate
Valves, request
Part No. D (OD) E F G Kice Data
47A3 3 12 6 4½
Sheet DV-1.
47A4 4 12 6 4
47A5 5 12 6 3½ “Heavy Duty
47A6 6 12 6 3 design with
47A8 8 16 8 4 proven
"A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel. performance.”

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -14- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 51/52/53 GRAVITY SPLITTER VALVES
Gravity splitter valves available in stock in Aluminum or Steel. Stainless Steel available on special order.
Additional sizes, designs, gauges, and angles available upon request. Also available with actuation.

#51 Symmetrical Gravity Splitter Valve


Gravity Splitter Valve with streamlined design. Long taper
transitions assure good flow and sanitation. No ledges or laps. with each leg 15o from center
Butt weld fabrication. Available from Kice stock in Aluminum or D
Steel. Stainless Steel and other materials available on special
order. T

Self centering valve blade is metal laminated with white felt.


Quadrant shows blade position and locks in place. Rectangular
body section assures good stream splitting action. F

Options for Series 51/52/53/54 Gravity Splitter Valves:


• Tongue Seal Material
• White Food Grade Neoprene Tongue Seal
• Metal Tongue; no seal
• Automation
D D
• Air Cylinder, Rotary Air or Electric Actuation 30°
• Special Welding
• Special Angles Part No. D (OD) F T
• Shouldered Inlet 51A3 3 10½ 2
• Chain and/or Rope Operation Handles
51A4 4 13 2
• Additional Sizes
51A5 5 16¼ 2½
51A6 6 19½ 3
See next page for Series 54 Dual Gravity
51A8 8 23 4
Splitter Valve and automated drawing "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for Stainless Steel.

#52 Gravity Splitter Valve with #53 Gravity Splitter Valve with
o o
30 leg to left of center 30 leg to right of center
D D

T T

F F
E E

D D
30° D D 30°

Part No. D (OD) E F T Part No. D (OD) E F T


52A3 3 12 10 2 53A3 3 12 10 2
52A4 4 16 13 2 53A4 4 16 13 2
52A5 5 20 16½ 2½ 53A5 5 20 16½ 2½
52A6 6 24 19½ 3 53A6 6 24 19½ 3
52A8 8 32 25¾ 4 53A8 8 32 25¾ 4
"A" in part number specifies Aluminum material. "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for Stainless Steel. Specify "B" for Steel and "S" for Stainless Steel.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -15- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 54 DUAL GRAVITY SPLITTER VALVES
Gravity splitter valves available in stock in Aluminum or Steel. Stainless Steel available on special order.
Additional sizes, designs, gauges, and angles available upon request. Also available with actuation.

#54 Symmetrical Dual Gravity Splitter Valve


Gravity Splitter Valve with streamlined design. Long taper
transitions assure good flow and sanitation. No ledges or laps. with each leg 20o from center
Butt weld fabrication. Available from Kice stock in Aluminum or D
Steel. Stainless Steel and other materials available on special
T
order.

Self centering valve blade is metal laminated with white felt.


Quadrant shows blade position and locks in place. Rectangular
body section assures good stream splitting action. F

Options for Series 51/52/53/54 Gravity Splitter Valves: E


• Tongue Seal Material
• White Food Grade Neoprene Tongue Seal
• Metal Tongue; no seal
• Automation
• Air Cylinder, Rotary Air or Electric Actuation D 20° 20° D
D
• Special Welding
• Special Angles Part No. D (OD) E F T
• Shouldered Inlet 54A3 3 16 14 2
• Chain and/or Rope Operation Handles 4 20 17 2
54A4
• Additional Sizes
54A5 5 25 21½ 2½
54A6 6 30 26 3
See previous page for Series 51/52/53 8 39½ 33½ 4
54A8
Manual Gravity Splitter Valves "A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for Stainless Steel.

Kice Gravity Splitter Valves with various actuation packages

H
G

F F

Kice Series 51/52/53 Single and Series 54 Dual Gravity Diverter Valves with Air Actuation
package, include as standard, rotary air actuator, position switch and dual coil solenoid OD F G H
valve. Available in Nema 4/4X and Nema 7/9. Includes heavier shaft and bearing seals. 3 13 7/8 12 16
Series 54 has separate controls for each tongue. Kice Series 51/52/53 Single and Series 54 4 14 3/8 16 20
Dual Gravity Diverter Valves can also be supplied with an Air Cylinder operator controls 5 14 7/8 20 25
package. Other manufacturers brands can also be supplied upon request. See Speed 6 15 3/8 24 30
Spout Technical Manual - Page 23 for automation specifications. Contact Kice Technical 8 16 3/8 32 39 1/2
Sales with your applications and specifications.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -16- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 55A SPOUT DIVERTER VALVE
Kice 55A gravity diverter valves are manufactured from cast Aluminum only.
Available in manual operation and two styles of pneumatic actuation.

#55A Spout Diverter Valve


E A
The Kice 55A Diverter Valve is a two-way D
gravity valve for diverting material flow. The unit
is Cast Aluminum with a machined body and
rotor to assure positive positioning. The
Aluminum rotor has a hard anodized surface to
add wear resistance and long life. Normal
operation to 150oF. The valve is available in 4”, F
5” and 6”OD. Available with manual controls
B
and air actuation.

60°

Part No. D (OD) A B E F


55A4 4 3 1/8 9½ 9½ 8½
55A5 5 3¾ 11¾ 11¾ 10½
55A6 6 4 3/8 13¾ 13 5/8 12¼
Equipped with Self centering spring loaded detent and positive stops.
ISO View Manual Control adaptable to pull chain operation.

#55A Spout Diverter Valve with #55A Spout Diverter Valve with
Rotary Air Actuation (current style) Jamesbury Air Actuator (prior to 1/1/99)

E
A C D Typ
D Typ A C

F
B
B F

60o
60° E

See Kice Speed Spout Technical Manual - Page 23


for automation specifications.

Part No. D (OD) A B C E F Part No. D (OD) A B C E F


55A4 w/controls 4 3 1/8 9½ 11 1/16 9½ 8½ 55A4 w/controls 4 3 1/8 9½ 9 7/8 9½ 8½
55A5 w/controls 5 3¾ 11¾ 11½ 11¾ 10½ 55A5 w/controls 5 3¾ 11¾ 10½ 11¾ 10½
55A6 w/controls 6 4 3/8 13¾ 12½ 13 5/8 12¼ 55A6 w/controls 6 4 3/8 13¾ 11½ 13 5/8 12¼
Specify Nema 4/4X or Nema 7/9 controls when ordering Specify Nema 4/4X or Nema 7/9 controls when ordering

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -17- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 56 BUCKET VALVE
Kice 56 carbon steel bucket valves divert flow between two (2) 60O legs. Square inlet and outlet is standard with transitions
available to round. Also available in Stainless Steel. Available in manual operation, pneumatic actuation and electric operation.

#56 Bucket Valve


Kice 56 Bucket Valve is a heavy-duty diverter valve A D (Square)
constructed of carbon steel with an Abrasion-Resistant
(AR) Steel diverting plate. Available in 4” to 16” square
inlet and outlet with manual control, air cylinder, rotary
air actuator or electric actuation. Undrilled flanges are
standard. Inlet and Outlet transitions from square B
flange to round tubing are available (see below).

Part No. D (Size) A B C


56B4 4x4 1½ 6 7/8 7 1/16
56B5 5x5 1½ 8¼ 8 11/16 60°
56B6 6x6 1½ 8½ 8 13/16 C

56B7 7x7 1½ 8½ 8 13/16


56B8 8x8 1½ 10 11/16 11 1/16
56B9 9x9 1½ 11 3/16 12 3/16
56B10 10 x 10 1½ 12 7/8 13 3/8
56B12 12 x 12 1½ 15 1/8 15 5/8
56B14 14 x14 1½ 16 1/8 16½
56B16 16 x16 1½ 21 5/16 2 1/8 ISO VIEW
“B" in part number specifies Steel material. SHOWN WITH
Specify "A" for Aluminum and "S" for 304L Stainless Steel. MANUAL CONTROL

#56 Bucket Valve Steel Transitions #56 Bucket Valve shown with
D (Square) A
Rotary Air Actuation package
D (Round)

D (Round) D (Square) A H T #56 Bucket Valve shown with


4 4x4 1½ 6 3 Electric Automation package
5 5x5 1½ 6½ 3
6 6x6 1½ 7 3
7 7x7 1½ 7 3
8 8x8 1½ 8 3
9 9x9 1½ 8½ 3
10 10 x 10 1½ 10 4
12 12 x 12 1½ 11 4
14 14 x14 1½ 12 4
See Kice Speed Spout Technical Manual - Page 23
16 16 x16 1½ 13 4 for automation specifications.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -18- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 57GM & 57GA Slide Gate Valves
Kice 57GM Manual and 57GA Automated Slide Gate Valves are used in gravity and dust control applications
to throttle or for “on-off” control of air flow. Carbon Steel is standard; Aluminum and Stainless Steel also available.

57GM Slide Gate Valve


C
Part No. D (OD) A B C E F
57GM2 2 2¼ 6½ 3½ 3 6¼
57GM2½ 2½ 1 7/8 5¼ 4 3 6¼
57GM3 3 2¼ 5½ 4½ 3 6¼
57GM3½ 3½ 2½ 6¼ 5 3 6¼
57GM4 4 2¾ 7 5½ 3 6¼
57GM4½ 4½ 3 7¾ 6 3 6¼ B
57GM5 5 3¼ 8½ 6½ 3 6¼
D
57GM6 6 3¾ 10½ 7½ 3 6¼ INLET
57GM6½ 6½ 4 11½ 8 3 6¼
A
57GM7 7 4¼ 12½ 8½ 3 6¼
57GM8 8 4¾ 14 9½ 3 6¼
57GM9 9 5¼ 15¾ 10½ 3 6¼ E
F
57GM10 10 5¾ 17½ 11½ 3 6¼
57GM11 11 6¼ 19½ 12½ 4 8¼ Kice 57GM round, self-cleaning, Slide Gate valves are designed
57GM12 12 6¾ 21 13½ 4 8¼ and used for throttling or shut-off of gravity and/or dust control
applications. Standard in painted, 16 ga. carbon steel with round
57GM14 14 7¾ 24¼ 15½ 4 8¼
knurled plastic knob for micro adjustment of blade. Also available in
57GM16 16 8¾ 27¾ 17½ 4¼ 8 7/16 aluminum or stainless steel.
57GM18 18 9¾ 31 1/8 19½ 4¼ 8 7/16
57GM19 19 10¼ 33 20½ 4¼ 8 7/16 Ideal for dust control applications where an absolute airtight seal
is not required. 45o angle 57GM available on special order.
57GM20 20 10¾ 35 21½ 4¼ 8 7/16

57GA Automated Slide Gate Valve


C Kice 57GA round, self-cleaning, Slide Gate valves available
with pneumatic air cylinder operation and Nema 4 or Nema
7/9 position switch. Valve designed and used for throttling
or shut-off of gravity and/or dust control applications.
Standard in painted, 16 ga. carbon steel. Also available in
aluminum or stainless steel.
AIR
CYLINDER
POSITION Ideal for dust control applications where an absolute
SWITCH airtight seal is not required. 45o angle 57GA available on
special order.
See Kice Speed Spout Technical Manual - Page 23
for automation specifications.
B
Part No. D (OD) A B C E F
57GA2 2 1¾ 11 3/8 3½ 4 8
57GA3 3 2¼ 13 3/8 4½ 4 8
57GA4 4 2¾ 15 3/8 5½ 4 8
57GA5 5 3¼ 17 3/8 6½ 5 10
D
57GA6 6 3¾ 19 3/8 7½ 6 12
INLET
57GA8 8 4¾ 23 3/8 9½ 6 12
A
57GA10 10 5¾ 27 3/8 11½ 6 12
Standard material is Carbon Steel.
Also available in Aluminum and Stainless Steel.
E
F
Specify material if not Carbon Steel.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -19- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 58GM Heavy Duty Manual Slide Gate Valves
Kice 58GM Manual Slide Gate Valve is a heavy duty steel square slide gate valve built for heavier duty applications
with hardened surfaces to resist abrasion. Kice 58GA Automated Slide Gate Valve is shown on next page.

58GM Heavy Duty Manual Slide Gate Valve


DRILL & TAP 3/8”-16 UNC
PER “E” PATTERN OR PER
CUSTOMERS REQUIREMENTS

Kice Series 58GM valves are


carbon steel square slide gate
valves built for heavy duty 1 3/8” (Typ)

applications with 3” channel


steel construction and
hardened surfaces to resist
wear from abrasion. Slide gate CL
B
material is 10 ga. AR Steel.
Available in 4” through 15” gate
sizes. Product inlet and outlet
transitions from square to
round are shown at bottom
right. For automated 58 Series
valve see next page. A
RETRACTABLE PLUNGER LOCK
C
Kice Series 58GM Valves are
for gravity application only. Not
intended for pressure
applications. 3”

SLIDE WIPER BRUSH SEAL

Part No. A B C E (Spacing)


58GM-04-04 4 4 14 Blank Flange OPTIONAL TRANSITIONS
58GM-05-05 5 5 16 Blank Flange
58GM-06-06 6 6 18 See Note below
58GM-07-07 7 7 20 Blank Flange
58GM-08-08 8 8 22 See Note below
58GM-09-09 9 9 24¼ Blank Flange 3" 6"
58GM-10-10 10 10 26 See Note below
58GM-11-11 11 11 28 Blank Flange -01 -02
Square Flange Square Flange
58GM-12-12 12 12 30 See Note below to Round Flange to Tube OD
58GM-13-13 13 13 32 Blank Flange 1 ½”
58GM-14-14 14 14 34 See Note below
58GM-15-15 15 15 36 See Note below
Note: For Airlock Flange hole pattern, see Kice Speed Spout
Technical Manual - Page 53 or Kice Dwgs. #1-4391A -03
(Square) or #1-4392A (Round). Optional flange pattern Square Flange (Round Opening)
to Round Flange (INLET ONLY)
available as required on all sizes.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -20- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 58GA Heavy Duty Automated Slide Gate Valves
Kice 58GA Automated Slide Gate Valve is a heavy duty steel square slide gate valve built for heavier duty applications
with hardened surfaces to resist abrasion. Kice 58GM Manual Slide Gate Valve is shown on previous page.

58GA Heavy Duty Automated Slide Gate Valve


DRILL & TAP 3/8”-16 UNC
Kice Series 58GA valve is the PER “E” PATTERN OR PER
CUSTOMERS REQUIREMENTS
pneumatically actuated version
of the Series 58GM valve. CL LIMIT SWITCH
Same heavy-duty construction
with Air Cylinder and Limit 1 3/8” Typ 2 ¾" Max.
FINGER GUARD
Switch. Switch available in (GUARD NOT SHOWN)
Nema 4 or Nema 7/9. Square
slide gate valves built for
heavier duty applications with B CL
3” channel steel construction
and hardened surfaces to resist AIR CYLINDER
wear from abrasion. Slide gate
material is 10 ga. AR Steel. A
Complete with guard. Available C D
in 4” through 15” gate sizes. (APPROX. TO CYL. END)
Product inlet and outlet
transitions from square to FINGER GUARD
round are shown at bottom
right.
3”

Kice Series 58GM Valves are


for gravity application only. Not SLIDE WIPER BRUSH SEAL FINGER GUARD
ON BOTTOM SIDE (OPTIONAL)
intended for pressure
applications.
See Kice Speed Spout Technical Manual - Page 23 for automation specifications.

Part No. A B C D (Approx) E (Spacing) OPTIONAL TRANSITIONS


58GA-04-04 4 4 14 6 7/8 Blank Flange
58GA-05-05 5 5 16 7 7/8 Blank Flange
58GA-06-06 6 6 18 8 7/8 See Note below
58GA-07-07 7 7 20 9 7/8 Blank Flange
58GA-08-08 8 8 22 10 7/8 See Note below 3" 6"
58GA-09-09 9 9 24¼ 11 7/8 Blank Flange
58GA-10-10 10 10 26 12 7/8 See Note below -01 -02
58GA-11-11 11 11 28 13 7/8 Blank Flange Square Flange Square Flange
to Round Flange to Tube OD
58GA-12-12 12 12 30 14 7/8 See Note below 1 ½”
58GA-13-13 13 13 32 15 7/8 Blank Flange
58GA-14-14 14 14 34 17 See Note below
58GA-15-15 15 15 36 18 See Note below
Note: For Airlock Flange hole pattern, see Kice Speed Spout Technical -03
Manual - Page 53 or Kice Dwgs. #1-4391A (Square) or #1-4392A Square Flange (Round Opening)
to Round Flange (INLET ONLY)
(Round). Optional flange pattern available as required on all sizes.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -21- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 59BS & 59BD DIAMOND SLIDE VALVES
Kice Series 59 Single and Double Diamond Slide valves offer precise control of easy flowing materials, such as grain,
plastic pellets, and other granular materials. Standard with micro adjustment of slide and micro counters.

#59BS Single Diamond Slide Valve


D

E
A
F

G
E

The Kice Series 59 Single Diamond Carbon Steel Slide Part No. D (OD) A B C E F G
Valve has an opening which moves across the outlet as 59BS4 4 15 8½ 9 2 5 9 5/8
the adjustments are made. The design offers more
59BS5 5 17 1/8 9½ 10½ 2½ 6¼ 11 3/8
precise control with micro adjustment of the slide and
micro counters to assure the slides can be reset to the 59BS6 6 20 3/8 10½ 12½ 3 7½ 12¾
exact opening size. With the use of the counters, the 59BS8 8 26¾ 15 18 4 10 17 3/8
59BS Single Diamond valve slides can be reset within 59BS10 10 32 3/8 17 20 4 11½ 21
0.0025”. Available in 4” through 12” OD sizes.
59BS12 12 38 7/8 20 22 4 13 23 7/8

#59BD Double Diamond Slide Valve


D
A
E
F

E
G
D

The Kice Series 59 Double Diamond Carbon Steel Slide


Part No. D (OD) A B C E F G Valve has two (2) opening gates that move in opposite
59BD4 4 19 5/8 10¼ 9 2 4 12¼ directions as adjustments are made. The opening always
stays in the center of the valve. The design offers more
59BD5 5 23¼ 11 5/8 10½ 2½ 5 14½
precise control with micro adjustment of the slide and
59BD6 6 26¾ 13 12 3 6 16½ micro counters to assure the slides can be reset to the
59BD8 8 34¼ 16 3/8 15 4 8 21 exact opening size. With the use of the counters, the
59BD10 10 41 3/8 19¼ 18 5 10 25¼ 59BD Double Diamond valve slides can be reset within
0.005”. Available in 4” through 10” OD sizes.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -22- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 65 MANUAL SWITCH STATION &
AUTOMATED CONTROLS PACKAGE SPECIFICATIONS

#65 Manual Switch Station


Kice Series 65 Manual Switch Station is very
versatile and built to your specifications. A B C C C B A E
variety of rows, ports, and sizes are available.
B
Typically, a Kice 65 Manual Switch Station is D
manufactured from 1/4” thick Aluminum plate,
with Aluminum or Brass Male Camlock on one C
end and tube OD other end. Size and number
of ports is per customer specification.

Options include: C
1) Materials of Construction: Aluminum,
Carbon Steel, or Stainless Steel
B
2) Number of Positions, Rows, & Sizes
3) Female Part “V” Caps supplied 1/4” Thk
4) Support Stand
5) Mounting Frame Typical Port Configuration
6) Conveying Line Hose No. of Ports Rows Ports per Row No. of Ports Rows Ports per Row
3 1 3 8 2 4
4 1 4 10 2 5
Part No. A B C D E
6 2 3 12 3 4
65A-3-X 3 3 6 3 3
65A-4-X 4 4 8 4 4
65A-5-X 5 5 10 5 5
For information on hoses and connections to be
65A-6-X 6 6 12 6 6
"A" in part number specifies Aluminum material.
used and/or supplied with Kice Series 65
Specify "B" for Steel and "S" for 304L Stainless Steel. Manual Switch Stations, see pages Speed
"X" in part number specifies number of positions. Spout Technical Manual - Pages 45 through 49.

Kice Automation Control Package Specifications and Options


Standard Rotary Actuator with Nema 4/4X Controls: Standard Air Cylinder Actuation with Nema 4/4X Controls:
• Double Acting Rotary Air Actuator (based on 80-120 PSIG • Double Acting Air Cylinder (based on 80-120 PSIG clean,
clean, dry, plant air supply). dry, plant air supply), covered with expanded metal guard.
• Dual Coil Nema 4/4X Solenoid Valve, NAMUR mount, with • Dual Coil Nema 4/4X Solenoid Valve, with 120VAC coils and
120VAC coils and DIN connectors each end, flow control DIN connectors each end, flow control exhaust mufflers,
exhaust mufflers, bracketing and mounting. bracketing and mounting.
• Position Switch with 2 each mechanical limit switches, • Position Switch with 2 each mechanical limit switches, Nema
Nema 4/4X, internal terminal strip, 120VAC, ½” NPT conduit 4/4X, internal terminal strip, 120VAC, ½” NPT conduit
connection, bracketing and mounting. connection, bracketing and mounting.

Standard Rotary Actuator with Nema 7/9 Controls: Standard Air Cylinder Actuation with Nema 7/9 Controls:
• Double Acting Rotary Air Actuator (based on 80-120 PSIG • Double Acting Air Cylinder (based on 80-120 PSIG clean,
clean, dry, plant air supply). dry, plant air supply), covered with expanded metal guard.
• Dual Coil Nema 4/4X/7/9 Solenoid Valve, NAMUR mount, • Dual Coil Nema 4/4X/7/9 Solenoid Valve, with 120VAC coils
with 120VAC coils and DIN connectors each end, flow control and DIN connectors each end, flow control exhaust mufflers,
exhaust mufflers, bracketing and mounting. bracketing and mounting.
• Position Switch with 2 each mechanical limit switches, • Position Switch with 2 each mechanical limit switches, Nema
Nema 4/4X/7/9, internal terminal strip, 120VAC, ½” NPT 4/4X/7/9, internal terminal strip, 120VAC, ½” NPT conduit
conduit connection, bracketing and mounting. connection, bracketing and mounting.

Standard Electric Actuation with Nema 4/4X Controls: Kice Automation Options:
• 120vAC Electric Actuator, Nema 4/4X, with internal heater Single Coil solenoid valves, other voltages & designs, switch
and thermostat, torque-limiting system, 2 each extra limit configurations, or other branded OEM equipment available
switches, manual override, ¾” NPT conduit connection, upon request and specification. Contact Kice Technical Sales
bracketing and mounting. for more information or your specifications.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -23- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 67Q 2-WAY DIVERTER VALVES
Kice Series 67Q 2-Way Heavy Duty Diverter Valves are designed for pressure applications to divert flow from one conveying
line to another with close tolerances to ensure a tight seal and prevent product stream cross contamination.

#67Q 2-Way Diverter Valve


Kice Series 67Q 2-Way Diverter Valves are
designed for High Pressure pneumatic C
conveying applications. Straight thru design
with 30o divert leg with close tolerances for
tight seal and to prevent product cross
contamination. Constructed with cast iron
bodies, rotors, and endplates, the Kice 67Q
30°
diverter valve is built for long lasting service. B
Cast Iron transitions are included and are
available in Tube OD and IPS sizes.
Fabricated transitions also available. A variety
of control options are available, including
bare, manual, electric, rotary air actuator and
air cylinder operation.

“Converging Valve” configuration (multiple F D Typ


A
inlets to one common outlet) available when G
specified. E

Part No. D (OD) A B C E F G BARE WT


67Q2-2 2 8 6 7/8 6 16 6 5/8 13¼ 70
67Q2½-2 2½ 8 6 7/8 6 16 6 5/8 13¼ 70
67Q3-2 3 8 6 7/8 6 16 6 5/8 13¼ 75
67Q4-2 4 10 9¼ 8 21½ 7½ 15 125
67Q5-2 5 13 11½ 9 7/8 26½ 7¾ 15½ 200
67Q6-2 6 16 13 7/8 12 1/8 32½ 8½ 17 260
67Q8-2 8 21 15½ 17 3/8 40¼ 9 7/8 19¾ 370
67Q10-2 10 25 18½ 20 3/8 50 5/8 11 7/8 23¾ 515
Food Grade Nevastane Grease supplied as standard on valve used in food industry.
Transistions to Tube OD supplied as standard. Half Sizes and Pipe Size Transistions supplied when specified.
Standard mounting of controls as shown below. Other side optional and must be specified.
Position Switch direct mounted to shaft opposite side as option.
Stainless Steel Diverter Valves available on special order. Contact Technical Sales.

F
67Q shown with manual control 67Q shown with rotary air actuator controls 67Q shown with air cylinder controls
(guard partially shown)

IMPORTANT NOTICE:
Effective 6/01, all Kice 67Q 2-way and 3-way
Diverter Valves will be standard with Chrome
Plated Interior body surfaces and Nickel Plated
Rotor. The valves are suitable for indoor and/or
67Q shown with electric automation
outdoor service. The treatment prevents rust,
See Kice Speed Spout Technical Manual - Page 23 corrosion, galling and “sticking” due to moisture.
for automation specifications.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -24- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 67Q 3-WAY DIVERTER VALVES
Kice Series 67Q 3-way Heavy Duty Diverter Valves are designed for pressure applications to divert flow from one conveying
line to any of three outlets with close tolerances to ensure a tight seal and prevent product stream cross contamination.

#67Q 3-Way Diverter Valve


Kice Series 67Q 3-Way Diverter Valves are
designed for High Pressure pneumatic 30°
conveying applications. Straight thru design
with 2 each 30o divert leg with close tolerances
for tight seal and to prevent product cross
contamination. Constructed with cast iron
B
bodies, rotors, and endplates, the Kice 67Q
diverter valve is built for long lasting service.

Cast Iron transitions are included and are


available in Tube OD and IPS sizes.
Fabricated transitions also available. A variety
of control options are available, including B
bare, manual, electric and air cylinder
operation.

“Converging Valve” configuration (multiple 30°


inlets to one common outlet) available when D Typ
A C
specified. F
E G

Part No. D (OD) A B C E F G BARE WT


67Q2-3 2 11¼ 7 5/8 9¼ 22½ 7 14 105
67Q2½-3 2½ 11¼ 7 5/8 9¼ 22½ 7 14 105
67Q3-3 3 11¼ 7 5/8 9¼ 22½ 7 14 105
67Q4-3 4 12¼ 8 1/8 10 24½ 8 3/16 16 3/8 130
67Q5-3 5 14¼ 9 5/8 11½ 28½ 8 15/16 17 7/8 205
67Q6-3 6 17 1/8 11 3/8 13½ 34¼ 9 15/16 19 7/8 325
67Q8-3 8 22 3/8 14 3/8 17 3/8 44¾ 11 15/16 23 7/8 590
Food Grade Nevastane Grease supplied as standard on valve used in food industry.
Transistions to Tube OD supplied as standard. Half Sizes and Pipe Size Transistions supplied when specified.
Standard mounting of controls as shown below. Other side optional and must be specified.
Position Switch direct mounted to shaft opposite side as option.
Stainless Steel Diverter Valves available on special order. Contact Technical Sales.

F
67Q 3-way with manual control 67Q 3-way with air cylinder controls (guard partially shown) 67Q 3-way with electric automation

Complete information on Kice 67Q IMPORTANT NOTICE:


Effective 6/01, all Kice 67Q 2-way and 3-way
2-way and 3-way Diverter Valves Diverter Valves will be standard with Chrome
and 68Q Bin Fill Valves is available Plated Interior body surfaces and Nickel Plated
in Kice Data Sheet DV-1. Rotor. The valves are suitable for indoor and/or
outdoor service. The treatment prevents rust,
See Kice Speed Spout Technical Manual - Page 23 corrosion, galling and “sticking” due to moisture.
for automation specifications.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -25- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 68Q BIN FILL VALVES
Kice 68Q Bin Fill Valves are typically installed in pneumatic loop conveying systems, discharging to multiple hoppers, scales
or bins. Simultaneously, a second channel in the valve vents the conveying air from the bin back to the storage bin.

#68Q Bin Fill Valve


C E
Kice Series 68Q Bin Fill Valve are designed for conveying into B F
bins while being able to vent conveying air at the same time. T D
Straight thru design with 90o divert position with close tolerances
for tight seal and to prevent product cross contamination. Low
height requirements and straight through tube connections
simplify installation. Constructed with cast iron bodies, rotors, and
endplates, the Kice 68Q Bin Fill Valve is built for long lasting A
FLOW
service.

Valves include cast transitions to Tube OD. The sectional


drawings to the right illustrate the basic simplicity of our unique
design and how it eliminates bin vent bags, cyclones, and vent 3/16”
piping otherwise required. A variety of control options are O 60o DIVERTED EXHAUST
available, including bare, manual, electric, rotary air actuator and BAFFLE PLATE POSITION FROM BIN

air cylinder operation.


N
Kice 68Q Bin Fill Valves may be installed in series to control the G 3/8”
flow of stock to a number of destinations. A bin level or weight-
sensing device may be provided to switch the valve actuator I POSITION #1
when the scale hopper or bin is filled.
MH J THRU
POSITION
A 10 ga. carbon steel baffle plate to control fine product “carry-
over” is supplied as standard. Correct orientation of Baffle Plate
shown at right or see Kice Dwg #1-3439A for details. K
L POSITION #2

Part No. D (OD) A B C E F G H I J K L M N O T BARE WT


68Q2 2 9 12 24 13¾ 6 7/8 6 9/16 5 3 7/16 6 7/8 4¼ 8½ 8 9 1/16 9 3 110
68Q2½ 2½ 9 12 24 13¾ 6 7/8 6 9/16 5 3 7/16 6 7/8 4¼ 8½ 8 9 1/16 9 3 110
68Q3 3 9 12 24 13¾ 6 7/8 6 9/16 5 3 7/16 6 7/8 4¼ 8½ 8 9 1/16 9 3 115
68Q4 4 9 12 24 13¾ 6 7/8 6 9/16 5 3 7/16 6 7/8 4¼ 8½ 8 9 1/16 9 3 115
68Q5 5 10¾ 13 26 14¼ 7 1/8 9 1/8 6 4 8 5½ 11 9 12 1/8 10 3 150
68Q6 6 12½ 14 28 15½ 7½ 10 1/8 7 4½ 9 6 1/8 12¼ 10 13 1/8 11 3 225
68Q8 8 13 5/8 22 44 20 1/8 10 1/16 12 9 5/8 5 11/16 11 3/8 6 5/8 13¼ 12½ 14 7/8 12 --- 325
Food Grade Nevastane Grease supplied as standard on valve used in food industry.
Transitions to Tube OD supplied as standard. 8" supplied with Bolt-On Transitions.
Standard mounting of controls as shown below. Other side optional and must be specified when ordering.
Position Switch direct mounted to shaft opposite side as option.
68Q8 and all Stainless Steel Diverter Valves are fabricated and available on special order. Contact Technical Sales.

68Q shown with manual control 68Q shown with rotary air actuator controls 68Q shown with air cylinder controls (guard partially shown)

IMPORTANT NOTICE:
Effective 6/01, all Kice 67Q 2-way and 3-way
Diverter Valves will be standard with Chrome
Plated Interior body surfaces and Nickel Plated
Rotor. The valves are suitable for indoor and/or
68Q shown with electric automation
outdoor service. The treatment prevents rust,
See Kice Speed Spout Technical Manual - corrosion, galling and “sticking” due to moisture.
Page 23 for automation specifications.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -26- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 71/72/73 SIGHT GLASSES
Series 70 Kice Sight Glasses are available in flanged and Tube OD. Available from stock in Aluminum or Steel.
Stainless Steel available on special order. Additional sizes, designs, and gauges available upon request.

#71-2 Round-to-Round Flanged Sight Glass #71-3 Round-to Square Flanged Sight Glass
B B
A A

L L C

Part No. SIZE A (ID) B (OD) L Part No. SIZE A (ID) B (OD) L C
71A6-2 6 5½ 9 6 71A6-3 6 5½ 9 6 9
71A8-2 8 7½ 11 6 71A8-3 8 7½ 11 6 11
71A10-2 10 9½ 13 6 71A10-3 10 9½ 13 6 13¼
71A12-2 12 11½ 15 6 71A12-3 12 11½ 15 6 15¼
71A14-2 14 13½ 17¼ 6 71A14-3 14 13½ 17¼ 6 17¼
71A15-2 15 14½ 18¼ 6 71A15-3 15 14½ 18¼ 6 18¼
"- 2" specifies Round-to-Round Sight Glass and “- 3” specifies Round-to Square Sight Glass.
Sight Glass flange patterns shown on Speed Spout Technical Manual - Page 53 or Kice Drawings #1-4391A (Square) or #1-4392A (Round).
"A" in part number specifies Aluminum material. Specify "B" for Steel and "S" for 304L Stainless Steel.
Series 71 Sight Glass assemblies rated to 15 PSIG and 15 in. Hg.
6”OD size uses Polycarbonate tubing and is rated to 240oF; 8” and larger use Acrylic tubing and are rated to 150oF.
For 4” long Series 71 Sight Glass replacement tube, specify PN 73P(Size)-4
For replacement Neoprene Garter, specify “Garter for (Size) Sight Glass”
For replacement Band Clamp, specify “Band/Clamp Assembly for (Size) Sight Glass”

#72 Tube OD Sight Glass #73 Replacement Sight Glass Tube


B
Part No. D (OD) L T B
D
72A2-2 2 18 9 2¾
72A2½-2 2½ 18 9 3
72A3-2 3 18 9 3¼ WALL L
2 EA. 3/8” 72A3½-2 3½ 18 9 3½
HOLES 72A4-2 4 18 9 3¾ We maintain a large Part No. D (OD) L WALL
stock of clear plastic 73P2-X 2 96" 1/8"
72A4½-2 4½ 18 9 4
tubing in full lengths, or
72A5-2 5 18 9 4¼ cut to your specifications. 73P2½-X 2½ 96" 1/8"
72A5½-2 5½ 18 9 4½ Sight glass is priced 73P3-X 3 96" 1/8"
6” T L 72A6-2 6 18 9 4¾ per inch, plus a standard 73P3½-X 3½ 96" 1/8"
72B7-2 7 18 9 5 cutting charge. When 73P4-X 4 96" 1/8"
72B8-2 8 18 9 5¼ ordering, indicate desired 73P4½-X 4½ 72" 1/8"
72B10-2 10 18 9 6¼ length in inches in place
72B12-2 12 18 9 7¼ of the “X”. 73P5-X 5 96" 1/8"
3” Typ 73P5½-X 5½ 72" 1/8"
72B14-2 14 18 9 8¼ Replacement tubes for
D 72B15-2 15 18 9 8¾ Kice Series 71 and 72 73P6-X 6 96" 1/8"
Sight Glass are indicated 73P7-X 7 72" 3/16"
"A" in part number specifies Aluminum material. below. OD sizes 2”, 2½”,
Specify "B" for Steel and "S" for 304L Stainless Steel. 73P8-X 8 72" 3/16"
3”, 3½”, 4”, 5” and 6” are
Note: Aluminum not available in 7”OD, and 10” and larger.
Polycarbonate; Other 73P10-X 10 72" 3/16"
Replacement Components: 73P12-X 12 72" 3/16"
Series 72 Sight Glass Tubing: PN 73P(Size)-9 sizes are Acrylic.
Neoprene Garter: “Garter for (Size) Sight Glass” Other sizes and wall 73P14-X 14 72" 3/16"
Band Clamp: “Band/Clamp Assembly for (Size) Sight Glass” thicknesses are available 73P15-X 15 72" 3/16"
Series 72 Sight Glass assemblies rated to 15 PSIG and 15 in. Hg. on special order. L = Full length
OD sizes 2”, 2½”, 3”, 3½”, 4”, 5” and 6” rated to 240oF
OD sizes 4½”, 5½”, 7” and larger rated to 150oF. For Series 71 replacement tube, specify PN 73P(Size)-4
Metal bar between tubes is static conductor. For Series 72 replacement tube, specify PN 73P(Size)-9
Additional stiffener bar on 10” and above (not shown).

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -27- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 74/75/76/77 FITTINGS
Tube OD fittings are available from stock in Aluminum or Steel. Stainless Steel available on special order.
Fittings are mitered and butt welded without laps. Additional sizes, designs, gauges, and angles available upon request.

#74 Round Inspection Port #75 Hinged Inspection Port


A
79NL Cap Widely recognized to be the milling worlds
outstanding spout inspection design!

A
D

B
L
A very practical and convenient inspection port that D
simply couples in place in a spouting line.

Part No. D (OD) A L B


74A4-4 4 4 18 9 L
74A5-4 5 4 18 9
74A5-5 5 5 18 9 Fitting couples Part No. D (OD) A L
74A6-4 6 4 18 9 easily in-line.
75A4 4 10 18
74A6-5 6 5 18 9 75A5 5 10 18
White foam lid
74A6-6 6 6 18 9 liner provides 75A6 6 10 18
74A8-5 8 5 18 9 smooth dust-tight 75A8 8 10 18
74A8-6 8 6 18 9 seal. Latch pulls Each 75 supplied with 76 Hinged Lid
Each 74 supplied with 79NL Neoprene Cap lid down to spout "A" in part number specifies Aluminum.
"A" in part number specifies Aluminum material. under tension. Specify "B" for Steel.
Specify "B" for Steel and "S" for 304L Stainless Steel. Specify "S" for Stainless Steel.

#76 Hinged Lids #77 Sifter Knee


LID LINED WITH BEAD
A WHITE FOAM Very practical design.
B Top section is beaded
A to hold sifter sock and
lower section is long
D C 60° 79NL enough to extend
Cap through the floor.

L Also available with


E
hinged lid.
For installation on Part No. D (ID) A
spouting while on the May be varied to fit
job. Cut hole, fasten 76A4-7 4 7
your requirements.
hinges and catch 76A4-10 4 10 Call Kice with your
assembly to spouting 76A5-7 5 7 D specifications.
and latch to spout.
76A5-10 5 10
White foam liner 76A6-7 6 7 Part No. D (OD) A B C E L
provides dust tight 77A4-4 4 4 2½ 8¾ 5 23
76A6-10 6 10 8¾ 5
sanitary seal. Use 10” 77A5-4 5 4 2½ 23
length when space 76A8-7 8 7 77A5-5 5 5 2½ 8¾ 5 23
permits; 7” when 76A8-10 8 10 77A6-4 6 4 2½ 8¾ 5 23
crowded. Specify "A" in specifies Aluminum material. 77A6-5 6 5 2½ 8¾ 5 23
length when ordering. Specify "B" for Steel. 77A6-6 6 6 2½ 8¾ 5 23
Specify "S" for 304L Stainless Steel. Each 74 Sifter Knee supplied with 79NL Neoprene Cap
Each 76 hinged lid includes 2 each plated steel hinges and "A" in part number specifies Aluminum material.
1 each “latch & catch” assembly and is lined with white foam. Specify "B" for Steel and "S" for 304L Stainless Steel.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -28- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 78/79/79N/79NL FITTINGS
Lids, Caps, and Plugs are available from stock in Aluminum, Steel and/or Molded Neoprene. Stainless Steel available
on special order. Additional sizes, designs, gauges, and angles available upon request.

#78 Saddle Lid #79NLV Molded Neoprene Vent Cap


B

LID CLAMPS
PAST SPOUT
L
CENTERLINE

A D

79NL Molded Neoprene Cap (detailed below), bored, with


insert of Chrome Plated perforated metal with 1/16”
diameter holes on 3/32” staggered centers.
May also be supplied with 30 mesh Stainless Steel
Fits hole cut in spout on Screen - Specify 79NLV(Size)-30 Mesh
job. Hard temper This replaces the fabricated Aluminum 79A Series, but
aluminum saddle lid 79As’ remain available for plug style and sizes other than
clamps to spout by Part No. D (OD) L
4”, 5”and 6”OD.
spring tension. Can 78A4 4 7
slide open without 78A5 5 7 Part No. D A B
removing. 79NLV4 4 3 7/8
78A6 6 7
Available in 78A8 8 7 79NLV5 5 4 7/8
Aluminum only. Handle riveted to saddle lid 79NLV6 6 5 7/8

#79N Molded Neoprene Plug #79NL Molded Neoprene Cap


W L
B

D C B D

A simple, low cost, plug designed to fit inside OD tubing, A simple, low cost, cap designed to fit over OD tubing,
for round inspection ports that meet requirements for for round inspection ports that meet requirements for
sanitation and convenience. Solid molded neoprene sanitation and convenience. Solid molded neoprene
rubber has no hollow sections or crevices and will not rubber has no hollow sections and will not break or
break or bend out of shape. Reusable. bend out of shape. Reusable. Kice logo molded on
top.
Material: 70 Durometer Food Grade Neoprene
Color: Gray Material: 70 Durometer Food Grade Neoprene

Part No. D W B C Part No. D L B


79N4 4 ¾ 4½ 3 13/16 79NL4 4 1 3/16 7/8
79N5 5 ¾ 5½ 4 13/16 79NL5 5 1 3/16 7/8
79NL6 6 1 3/16 7/8

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -29- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 81S/84A/86N COUPLINGS AND CLAMPS
Joining spouting has never been easier. Practical and reusable screw clamp, band, and sleeve design makes installing
Kice Speed Spout easy. Series 82M heavy duty compression couplings are detailed on the following page.

#81S Screw Clamps HOW TO JOIN SPOUTING


D WITH SCREW CLAMP COUPLINGS
2 CLAMPS & BAND COUPLING; TYPE 2CB(Size)
2 CLAMPS, BAND & SLEEVE; TYPE 2CBS(Size)
3 CLAMPS, BAND & SLEEVE; TYPE 3CBS(Size)
4 CLAMPS, BAND & SLEEVE;
TYPE 4CBS(Size)
1/2”

Stainless Steel worm Without 86N With 86N


gear clamps provide Screw clamp couplings are less expensive and less
dependable clamping Part No. (OD) Part No. (OD) complicated than other joining systems,
power for Speed Spout 81S1½-24 1½ 81S1½-24 1½ The 2CB coupling shows at the left end of the drawing above is
connections 2 2 very satisfactory for joining gravity flow spouting. This consists merely of
81S2-32 81S2-32 two (2) 81S screw camps and one (1) 84A aluminum metal band.
Permanent, but easy to 81S2½-36 2½ 81S2½-40 2½ Installation involves butting the square ends of the two spout sections
together, wrapping the band around the joint and screw the clamps tightly.
release when necessary 81S3-44 3 81S3-48 3 This pulls the band snug - making the connection straight, strong, and
using a nut drive, screw 81S3½-52 3½ 81S3½-56 3½ leak-proof.
driver, or small wrench. Both pneumatic and vacuum tube connections must be air
81S4-60 4 81S4-64 4 tight. The same coupling arrangement may be used except a Kice Series
RUST-PROOF! 81S4½-68 4½ 81S4½-72 4½ 86N Neoprene Sleeve is slipped over the joint before wrapping the band
CORROSION-PROOF! around it. Two (2) 81S screw clamps are usually adequate for vacuum or
81S5-76 5 81S5-80 5 for pressures up to 5 PSI. Three (3) clamps are suggested up to 10 PSI
SHAKE-PROOF! and four (4) clamps up to 15 PSI. For outdoor applications or where
81S5½-84 5½ 81S5½-88 5½
additional support is required, we suggest the Kice Series 82M Heavy
Your quickest source 81S6-92 6 81S6-96 6 Duty Compression Couplings.
for clamps - We carry 81S7-108 7 81S7-112 7 All of these couplings work with butt joints. Besides being
a large inventory of all simple and quick, they make a smooth self-aligning connection, and are
sizes listed 81S8-124 8 81S8-128 8 100% reusable. The couplings can also be used to fasten rubber hose to
metal spouting.

#84A Standard Bands #86N Neoprene Sleeves


D D

Part No. D L Part No. D L


84A1½ 1½ 3 86N1½ 1½ 3
L
84A2 2 3 86N2 2 3
L
84A2½ 2½ 3 86N2½ 2½ 3
84A3 3 3 86N3 3 3
84A3½ 3½ 3½ Sleeves used in conjunction 86N3½ 3½ 3½
84A4 4 3½ with Kice 84A Standard Bands 86N4 4 3½
Bands are sheared, rolled, and are black, 40 Durometer, non-
ridge formed from a select type 84A4½ 4½ 3½ toxic neoprene, 0.094” wall 86N4½ 4½ 3½
of 0.020” thick Aluminum. The 84A5 5 4 material. 86N5 5 4
width is well suited for both 84A5½ 5½ 4½ The sleeving ID is 1/8” 86N5½ 5½ 4½
gravity spouting and air 84A6 6 5 smaller than the tubing OD for 86N6 6 5
systems. Stainless Steel a snug fit.
available on special order. 84A7 7 6 86N7 7 6
Also available in standard
Bands are shipped flat. 84A8 8 6 rolls of 10’ or cut to length. 86N8 8 6

#82M Heavy Duty Compression Couplings #85B Kice Compression Couplings


The Kice Series 82M Heavy Duty Compression Coupling Kice no longer manufacturers the Kice Series 85B Compression
replaced the Kice Series 85. Our Series 82M standard coupling is Couplings. It has been replaced by the Kice Series 82M Heavy
available in Tube OD and IPS sizes. 2, 3, and 4 bolt designs with Duty Compression Couplings and/or the 81S/84A/86N coupling
White Food Grade Neoprene Gasket and Ground Strip standard. detailed above. For sizes larger than 10”, consider the Kice CC
Detailed information is listed on pages 31 and 32. Couplings, detailed in the Kice Dust Duct catalog.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -30- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
KICE 82M HEAVY DUTY TUBE OD COMPRESSION COUPLINGS
Each Kice 82M Series Heavy duty Steel Compression Coupling comes with a White Neoprene Food
Grade Gasket and SS grounding strip as standard. OD sizes are typical for Kice systems and equipment.

Kice 82M Heavy Duty compression couplings designed Condensed Table of Thickness Specifications
for permanent installation in the joining of either plain SIZE SHELL SLEEVE GASKET
end, threaded, grooved end, or a combination of any of ½" - 2 7/8"OD .062
.052
these joints. The band type construction holds the entire 3"OD
.052 .093
surface of the joint in uniform compression. Couplings 3¼" - 5"OD
are reusable. Coupling consists of Steel Shell, inner 5¼" - 5 5/8"OD .062
sleeve, White Food Grade gasket and grounding strip. .125
9" - 24"OD .062

KICE CARTON NO. OF WEIGHT COUPLING BOLT


LINE SIZE OD
PART NO. QUANTITY BOLTS EACH LENGTH SIZE
82M1½-2 22 2 2.0 4"
1½"OD TUBE 1.50" ½" x 1¾"
82M1½-3 24 3 2.9 6"
82M2-2 30 2 2.1 4"
2"OD TUBE 2.00" ½" x 1¾"
82M2-3 18 3 3.1 6"
82M2½-2 24 2 2.6 4"
2½"OD TUBE 2.50" 82M2½-3 20 3 3.4 6" ½" x 1¾"
82M2½-4 18 4 4.6 8"
82M3-2 24 2 3.2 4"
3"OD TUBE 3.00" 82M3-3 18 3 4.5 6" 5/8" x 2"
82M3-4 13 4 5.9 8"
82M3½-2 20 2 3.4 4"
3½"OD TUBE 3.50" 82M3½-3 10 3 5.1 6" 5/8" x 2"
82M3½-4 10 4 6.6 8"
82M4-2 16 2 3.7 4"
4"OD TUBE 4.00" 82M4-3 12 3 5.3 6" 5/8" x 2"
82M4-4 8 4 7.2 8"
82M4½-2 12 2 3.8 4"
4½"OD TUBE 4.50" 82M4½-3 8 3 5.5 6" 5/8" x 2"
82M4½-4 6 4 7.7 8"
82M5-2 12 2 4.2 4"
5"OD TUBE 5.00" 82M5-3 8 3 6.2 6" 5/8" x 2"
82M5-4 6 4 8.1 8"
82M5½-2 8 2 4.4 4"
5½"OD TUBE 5.50" 82M5½-3 8 3 6.8 6" 5/8" x 2"
82M5½-4 8 4 9.0 8"
82M6-2 12 2 4.7 4"
82M6-3 10 3 7.0 6"
6"OD TUBE 6.00" 5/8" x 2"
82M6-4 7 4 9.4 8"
82M6-5 5 5 11.8 10"
82M7-3 6 3 7.9 6"
7"OD TUBE 7.00" 82M7-4 5 4 10.8 8" 5/8" x 2"
82M7-5 4 5 13.7 10"
82M8-2 4 2 11.0 6"
82M8-3 4 3 14.3 8"
8"OD TUBE 8.00" ¾" x 3"
82M8-4 2 4 18.0 10"
82M8-5 2 5 22.0 12"
82M10-3 2 3 17.5 8"
10"OD TUBE 10.00" 82M10-4 2 4 21.8 10" ¾" x 3"
82M10-5 2 5 26.1 12"
See next page for details regarding sizes, gaskets, and materials of construction.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -31- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
KICE HEAVY DUTY IRON PIPE SIZE COMPRESSION COUPLINGS
Each Kice 82M Series Heavy duty Steel Compression Coupling comes with a White Neoprene Food Grade
Gasket and SS grounding strip as standard. Pipe sizes are special Kice systems and equipment, but available.

Kice 82M Heavy Duty compression couplings designed Condensed Table of Thickness Specifications
for permanent installation in the joining of either plain SIZE SHELL SLEEVE GASKET
end, threaded, grooved end, or a combination of any of ½" - 2 7/8"OD .062
.052
these joints. The band type construction holds the entire 3"OD
.052 .093
surface of the joint in uniform compression. Couplings 3¼" - 5"OD
are reusable. Coupling consists of Steel Shell, inner 5¼" - 5 5/8"OD .062
sleeve, White Food Grade gasket and grounding strip. .125
9" - 24"OD .062

KICE CARTON NO. OF WEIGHT COUPLING BOLT


LINE SIZE OD
PART NO. QUANTITY BOLTS EACH LENGTH SIZE
82M2 3/8-2 26 2 2.2 4"
2" IPS 2.375" 82M2 3/8-3 18 3 3.5 6" ½" x 1 ¾"
82M2 3/8-4 12 4 4.7 8"
82M2 7/8-2 20 2 2.4 4"
2½" IPS 2.875" 82M2 7/8-3 11 3 3.7 6" ½" x 1 ¾"
82M2 7/8-4 10 4 5.0 8"
82M3½-2 16 2 3.4 4"
3" IPS 3.500" 82M3½-3 12 3 5.1 6" 5/8" x 2"
82M3½-4 8 4 6.6 8"
82M4-2 14 2 3.7 4"
3½" IPS 4.000" 82M4-3 10 3 5.3 6" 5/8" x 2"
82M4-4 7 4 7.2 8"
82M4½-2 12 2 3.8 4"
4" IPS 4.500" 82M4½-3 8 3 5.5 6" 5/8" x 2"
82M4½-4 6 4 7.7 8"
82M5-2 12 2 4.2 4"
4½" IPS 5.000" 82M5-3 8 3 6.2 6" 5/8" x 2"
82M5-4 6 4 8.1 8"
82M5 9/16-2 9 2 4.6 4"
5" IPS 5.563" 82M5 9/16-3 10 3 6.8 6" 5/8" x 2"
82M5 9/16-4 5 4 8.8 8"
82M6 5/8-2 8 2 5.3 4"
82M6 5/8-3 5 3 7.8 6"
6" IPS 6.625" 5/8" x 2"
82M6 5/8-4 4 4 10.4 8"
82M6 5/8-5 4 5 14.3 10"
82M8 5/8-2 4 2 11.5 6"
82M8 5/8-3 4 3 14.6 8"
8" IPS 8.625" ¾" x 3"
82M8 5/8-4 2 4 18.8 10"
82M8 5/8-5 2 5 23.0 12"
82M10¾-3 1 3 16.4 8"
10" IPS 10.75" 82M10¾-4 2 4 20.3 10" ¾" x 3"
82M10¾-5 2 5 25.2 12"

Kice has complete couplings available in sizes from ½" IPS to 24" OD. Contact Kice for pricing.
Kice Couplings are supplied with a white, food-grade, neoprene gasket as standard.
Other gaskets (i.e. black neoprene, red rubber, silicone, or high-temperature) are available on special order.
All replacement gaskets are supplied with the white, food-grade gasket and a SS grounding strip.
Zinc plated steel couplings are standard. Aluminum & SS Couplings available on special order.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -32- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 87A/88A/89 FLANGES AND SUPPORT RINGS
Flanges and Support Rings to fit Tube OD fittings are available from stock in Aluminum.
Floor flanges and Support Rings are cast aluminum.

#87A Floor Flange #88A Support Ring


D
TAPPED 3/8-16UNC

F D W

5/16”

1"

Part No. D F Designed to meet your needs Part No. D W


for a more attractive and
87A2 2 3¼ 88A2 2 1
Two piece cast aluminum sanitary tube support.
87A2½ 2½ 3¾ 88A2½ 2½ 1
alloy - clamps to tube and
trims around hole through 87A3 3 4¼ Polished aluminum alloy 88A3 3 1
floor. Should be set in caulk 87A3½ 3½ 4¾ casting in two (2) identical 88A3½ 3½ 1
and fill each screw recess 4 5¼ halves except one half 4 1
87A4 88A4
with caulking. tapped for clamp bolts and
87A4½ 4½ 5¾ 3/8”-16 tap for support rod. 88A4½ 4½ 1
87A5 5 6¼ 88A5 5 1
87A5½ 5½ 6¾ Supports tube vertically, 88A5½ 5½ 1
87A6 6 7¼ horizontally, or at any 88A6 6 1
angle - very versatile.
Aluminum only Aluminum only

#89 Floating Flange


”Locks”, “Star
Valves”, “RV”’s,
C
D
“Feeders”, -
B
A
Whatever you call
them... Call the
industry leader!

Flanges to mate to standard Kice Airlocks. Can be


Request Kice
used as a convenient floating flange for hoppers, Data Sheet
cyclones, transitions, etc...
RA-1 for
Part No. A (ID) B (OD) C Thk Holes D detailed
89A6 6 9¼ 8 3/16" 8 7/16" information
89A8 8 11¼ 10 3/16" 8 7/16"
on Kice
89A10 10 13¼ 12 3/16" 8 7/16"
89A12 12 15 3/8 14 3/16" 8 7/16" Rotary
89A14 14 17 3/8 16 1/4" 8 7/16" Airlock
89A15 15 18 3/8 16¾ 1/4" 12 7/16" Valves.
"A" in part number specifies Aluminum material.
Specify "B" for Steel and "S" for 304L Stainless Steel.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -33- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
KICE FABRICATED ANGLE RING FLANGES
Kice offers fabricated, close tolerance, angle ring flanges for use with our Kice Speed Spout and Dust Duct
components. “Leg Out” is standard and shown below, but many other styles are available.

INSIDE OUTSIDE BOLT NO. OF BOLT


ORDER ANGLE WEIGHT
MATERIAL DIAMETER DIAMETER CIRCLE BOLT HOLE
SIZE SPECIFICATIONS (IN LBS)
(A) (B) (C) HOLES DIAMETER
C 3" Mild Steel 10 ga., 1" X 1", Pressed 0.70 3 1/16" 5 1/16" 4 5/16" 6 9/32"
4" Mild Steel 10 ga., 1" X 1", Pressed 0.85 4 1/16" 6 1/16" 5 5/16" 6 9/32"
B 5" Mild Steel 10 ga., 1" X 1", Pressed 1.20 5 1/16" 7 1/16" 6 5/16" 6 9/32"
A
6" Mild Steel 1 1/4" x 1 1/4" x 1/8" 1.75 6 1/8" 8 5/8" 7 1/2" 6 3/8"
8" Mild Steel 1 1/4" x 1 1/4" x 1/8" 2.25 8 1/8" 8 5/8" 9 1/2" 8 3/8"
10" Mild Steel 1 1/4" x 1 1/4" x 1/8" 2.75 10 1/8" 10 5/8" 11 1/2" 8 3/8"
11" Mild Steel 1 1/4" x 1 1/4" x 1/8" 3.00 11 1/8" 11 5/8" 12 1/2" 8 3/8"
12" Mild Steel 1 1/2" x 1 1/2" x 1/8" 4.00 12 3/16" 15 3/16" 13 13/16" 12 7/16"

Kice Fabricated Angle Ring Flanges can be attached to all standard Kice Speed Spout components
and are easily welded on in the field. 3”, 4” and 5” flanges are pressed; Larger flanges are rolled angle
iron, “leg out” style. Angle specifications and thickness shown under “Specifications” column.

Standard material is mild steel; Aluminum and Stainless Steel are also available. Mild Steel flanges are
usually shipped with 48 hours of ordering.

Special order sizes, bolt hole dimensions, punching, and patterns available. Oval flanges available on
special order. Aluminum and Stainless Steel material, specials and Oval flanges are usually shipped
within 7-10 working days.

Kice offers a full line of angle ring flanges through 72”ID. Call or consult Dust Duct catalog for larger
sizes.

Gravity Stream Splitters spreads coarse and fine ground products,


splits it into smaller streams and discharges it into gravity spouts for
further processing. Request Kice Data
Sheet GSS-1 for detailed
information.

Rotary Stream Splitters


mixes and spreads
coarse and fine
products into a
homogeneous
mixture, splits it into
smaller streams
and discharges it
into gravity
spouts for further
processing. Request Kice Data
Sheet RSS-1 for detailed information.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -34- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 91/92/93 MISCELLANEOUS FITTINGS
Additional components to complete your project are available from Kice in Aluminum or Steel. Stainless Steel available on special
order. Fittings are mitered and butt welded without laps. Additional sizes, designs, gauges, and angles available upon request.

#91 Spout Dead Fall Box #92 Gravity Flow Streamguard


D
D
T
T

A
L L

Product speed slows when going through the Kice #91 Dead
Fall Box. Self cleaning stock funnel made from 12 ga. carbon Provides choke
steel. Easy access through hinged dust-tight door. For relief for gravity Part No. D (OD) L T
installation in vertical or steep pitch spouting. spouts. Large 92A4 4 18 2
cast aluminum 92A5 5 19 2½
Part No. D (OD) L T A B gate pivots open 92A6 6 20 3
to relieve excess
91B4 4 14 2 5 1½ "A" in Specifies Aluminum.
flow if stock
91B5 5 15 2½ 6 1¾ Specify "B" for Steel and
builds up to this
"S" for Stainless Steel.
91B6 6 16 3 7 2" point. For vertical
Steel Only; Replacement Funnel, Hinge & Latch/Catch available installations only. Cast Aluminum Gate on all models.

#93 Spout Air Inlet


Enjoy the
same high
D level of
quality Kice
B
has offered
L in their
equip-
ment
when
Vent fitting relieves Part No. D (OD) L B
you
excessive vacuum 93A4 4 7 9 allow
or pressure in
gravity spouts.
93A5 5 7 10 Kice to
Open area around 93A6 6 8 11 help
inlet spout covered "A" in part number specifies Aluminum.
by perforated metal. Specify "B" for Steel. auto-
For installation in Specify "S" for Stainless Steel.
Replaceable screen material is
mate your
vertical and sharp
pitch spouting. Zinc plated perforated steel w/ 5/32" process control
dia. holes, staggered every 3/16".
applications.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -35- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 94 MANUAL GRAVITY FLOW MAGNET SECTIONS
Series 94 Gravity Flow Magnet Sections with manual cleaning operator. Available with three (3) transition arrangements
in Aluminum, Carbon Steel, and Stainless Steel. Automated Series 94 Magnet Section available on next page.

#94S-M Magnet Section with Manual Cleaning Operator


D
3
2 1

14”

ACCESS
DOOR

9 7/8” F
STRIPPER
PLATE
DESTACO
MAGNET LATCHES
DESTACO
E LATCHES

4
1
D 3

¾” C ¾”
(INSIDE) Part No. D (OD) A B C E F
94S-M-4 4 15½ 3 4 1/8 28 23¾
B 94S-M-5 5 15½ 4 6 1/8 31½ 26¾
(OUTSIDE) 94S-M-6 6 16½ 4 8 1/8 35 29¾
94S-M-8 8 17½ 5 10 1/8 42 35¾
94S-M-10 10 19¼ 5½ 14 1/8 49 42¾

PART NO. (EXAMPLE) 94S-M-5-B-1-1


MODEL OUTLET TRANSITION TYPE
(SEE NOTE #1) CLEANING INLET TRANSITION TYPE -----------------------
(SEE NOTE #2) (SEE NOTE #4) 1-90° TO CENTER LINE
OD TUBE DIAMETER TRANSITION MATERIAL 3-VERTICAL
----------- (SEE NOTE #3) ----------------- --------------------
M-MANUAL 1-90° TO CENTER LINE 4-STRAIGHT THRU (OFFSET
--------------- A-ALUMINUM FOR EVEN CENTER LINES)
A-AUTOMATED 4" 5" 6" 8" 10" B-MILD STEEL 2-STRAIGHT THRU
S-STAINLESS STEEL 3-VERTICAL

NOTES: (1) Material of Construction for all body components to be 304SS


(Reference Kice Assembly Drawing #4-6366 for construction details.)
(2) Reference Kice Advertising Drawing #1-3638A or Kice Speed Spout Technical Manual -
Page 36 for unit with features for Automated Cleaning.
(3) OD tube Diameter to be constant at inlet and outlet transitions.
(4) Highest percentage of tramp metal retrieved with installed with inlet transition #1 or #2.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -36- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 94 AUTOMATED GRAVITY FLOW MAGNET SECTIONS
Series 94 Gravity Flow Magnet Sections with automatic cleaning operator. Available with three (3) transition arrangements
in Aluminum, Carbon Steel, and Stainless Steel. Manual Series 94 Magnet Section available on previous page.

#94S-A Magnet Section with Automatic Cleaning Operator


D 24”
3
SAFETY 2 1
GUARD & SOLENOID
D VALVE
CATCH
DRAWER ACCESS
DOOR
14”

12½” F

DESTACO
LATCHES
MAGNET

SECOND AIR
CYLINDER 4
CYLINDER E 1
ON LARGER
UNITS STRIPPER
D 3
DOOR
G 24”

¾” C ¾”
(INSIDE) Part No. D (OD) A B C E F G
94S-A-4 4 15½ 3 4 1/8 28 23¾ 12½
B 94S-A-5 5 15½ 4 6 1/8 31½ 26¾ 14½
(OUTSIDE) 94S-A-6 6 16½ 4 8 1/8 35 29¾ 16½
94S-A-8 8 17½ 5 10 1/8 42 35¾ 18½
94S-A-10 10 19¼ 5½ 14 1/8 49 42¾ 22½

PART NO. (EXAMPLE) 94S-A-5-B-1-1


MODEL OUTLET TRANSITION TYPE
(SEE NOTE #1) CLEANING INLET TRANSITION TYPE -----------------------
(SEE NOTE #2) (SEE NOTE #4) 1-90° TO CENTER LINE
OD TUBE DIAMETER TRANSITION MATERIAL 3-VERTICAL
----------- (SEE NOTE #3) ----------------- --------------------
M-MANUAL 1-90° TO CENTER LINE 4-STRAIGHT THRU (OFFSET
--------------- A-ALUMINUM FOR EVEN CENTER LINES)
A-AUTOMATED 4" 5" 6" 8" 10" B-MILD STEEL 2-STRAIGHT THRU
S-STAINLESS STEEL 3-VERTICAL

NOTES: (1) Material of Construction for all body components to be 304SS


(Reference Kice Assembly Drawing #4-6366 for construction details.)
(2) Reference Kice Advertising Drawing #1-3599A or Kice Speed Spout Technical Manual -
Page 35 for unit with features for standard Manual unit.
(3) OD tube Diameter to be constant at inlet and outlet transitions.
(4) Highest percentage of tramp metal retrieved with installed with inlet transition #1 or #2.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -37- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 95 DAMPER & 96 TATTLE TALE FITTINGS
Additional components to complete your project are available from Kice in Aluminum or Steel. Stainless Steel available on special
order. Fittings are mitered and butt welded without laps. Additional sizes, designs, gauges, and angles available upon request.

#95 Damper Section #95 Actuated Damper Section


L D D L

Controls air flow by reducing open Part No. D (OD) L Kice Series 95 Dampers are available
area of tube with minimum potential with spring return air cylinder operator
for dust to accumulate on internal 95A2 2 12
and 3-way single coil solenoid valve.
surfaces. Left Hand locking 95A2½ 2½ 12
Automated Kice Series 95 Dampers
quadrant is standard (shown). 95A3 3 12 have stem bearings and seals.
Quadrant marked for accurate 95A3½ 3½ 12
positioning. (Tighten wingnut to lock Options:
into position.) 95A4 4 12
4½ 12 • Electric Actuator
95A4½
• Rotary Air Actuator
Options: 95A5 5 12 • Various solenoid valve options. Call
Right Hand locking quadrant damper - 95A5½ 5½ 12 for details.
Specify “R/H Damper”
95A6 6 12
Damper components also only 95A8 8 12
available for installation in your "A" in Specifies Aluminum.
existing tubing - Specify “(Size) Specify "B" for Steel.
damper components only”. Specify "S" for Stainless Steel.

#96 Tattle Tale Section

INSUFFICIENT SUCTION SLIGHT CONCAVE INDICATES PROPER


IS INDICATED BY SUCTION - SEVERE CONCAVE
OVERINFLATED SLEEVE INDICATES TOO MUCH SUCTION

B A
Part No. D A B
96A2 2 6 15
D
96A2½ 2½ 6 15
96A3 3 6 15
96A3½ 3½ 6 15
Series 96 Tattle Tale sections are often used on the air outlet of a cyclone and/or other 96A4 4 6 15
pneumatic lines to indicate proper suction. An over inflated sleeve may indicate 96A4½ 4½ 6 15
insufficient suction, while severe suction is shown by a concave sleeve. Adjust and set 96A5 5 6 15
damper for best results.
96A5½ 5½ 6 15
Damper is standard Left Hand quadrant. Right Hand quadrant also available upon 96A6 6 6 15
request. 96A8 8 6 15
"A" in part number specifies Aluminum.
Replacement Nylon/Satin Sleeve x 12” length available as spare part. Nylon/Satin Specify "B" for Steel.
Sleeve have no UV protection and will deteriorate quicker in outdoor applications. Specify "S" for Stainless Steel.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -38- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
SERIES 97/NULL POINT FITTINGS/NH LOADING NOZZLE
Additional components to complete your project are available from Kice in Aluminum or Steel. Stainless Steel available on special
order. Fittings are mitered and butt welded without laps. Additional sizes, designs, gauges, and angles available upon request.

#97 Atmospheric Air Opening Various Kice Null Point Fittings


FLOW FLOW
L
D FREE AIR

FREE AIR

FREE AIR

REF: Kice Dwg 2-4123 REF: Kice Dwg 1-5314

Used to admit free air for maintaining conveying velocity in


branch and main lines while reducing air volume being
FLOW
withdrawn from controlled chamber. Adjustment made by
loosening screw clamps and rotating to desired position, then
tightening screw clamps to maintain position.
ADJUSTABLE SLEEVE DAMPER
REF: Kice Dwg 2-0134

Part No. D (OD) L Kice Industries manufacturers a variety of styles of free air
97A3 3 12 inlets, also known as “null point fittings.” The free air inlet
97A4 4 12 fittings allow air to enter the system. Typically, a sifter
performs best at atmospheric conditions, a Kice “Null Point
97A5 5 12 Fitting” on the inlets and outlets prevents excessive vacuum
97A6 6 12 or pressure from developing. In a pneumatic conveying
"A" in Specifies Aluminum. system, a Kice “Null Point Fitting” will allow make-up air into
Specify "B" for Steel. the system to provide conveying velocity. Available in sizes,
Specify "S" for Stainless Steel. materials and designs to meet your application.

“NH” Hatch Type Loading Nozzle


Kice “NH” Nozzle Hatch Loading Nozzle is R = 11”
designed to fit Air Slide connections for railcars
and bulk transportation trailers. TOGGLE CLAMP

1/4” thick Aluminum plate hatch cover with toggle


clamps. 360o rotating rectangular nozzle with
standard Tube OD connection. Other end
1”
connections available.
4”
Replacement gasket is Part Number #1-3918
¼" ALUMINUM PLATE SPECIFY END CONNECTIONS
Model A B C HATCH COVER TO FIT A LISTED AT LEFT
ALL AIR SLIDE CARS
NH-3-X 3 1¾ x 3 10
NH-4-X 4 2½ x 4 10
NH-5-X 5 4 x 4½ 11 GRAB BAR C
NH-6-X 6 4 7/8 x 5 12
"-X" = Specify end connection below
-1 = Tube OD (shown)
-2 = Brass Male Camlock GASKET PART #1-3918
RECTANGLE NOZZLE
-3 = Brass Female Camlock (dotted) ROTATES 360o
-4 = Steel Pipe Union (IPS)

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219-2358 Speed Spout Technical Manual - Page 39
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -39- Toll-Free: 877-289-5423 / Fax: (316) 267-5931
SERIES SGH STREAMGUARD BLENDER FITTINGS
Formerly called the Series 98 Blender Fitting. Redesigned to better performance and as of 4/04 they are standard with a
304L Stainless Steel body and has an adjustable chrome plated counterweight and adjustable air inlet.

NON STD
SGH Streamguard Blender Fitting DIAMETERS

ADJUSTABLE CHROME PLATED COUNTERWEIGHT

E A 7”
(INLET)
C

AIR IN

C 3” (4” on -8-8 and -10-10)


L

D
ADJUSTABLE AIR INLET 4” 3”
(5” on -10-10)

PIVOTED GATE (STOCK RELIEF)

45° AIR IN

C
L

C
L
B (OUTLET)
(SYM)

PART NUMBER EXAMPLE: SGH - 5 - 4

SERIES
INLET DIAMETER
OUTLET DIAMETER
ISO VIEW
Kice SGH Streamguard Blender Fittings serve as an Part No. A B C D E F
acceleration zone for pneumatically conveyed stocks and also as SGH -4-2 4 2 11¾ 13¼ 5½ 4¾
an automatic release for overload quantity.
SGH -4-2½ 4 2½ 11¾ 13½ 5½ 4¾
When suction requirements for conveying exceed vacuum
being developed by fan, the counter-weighted gate will fall away SGH -4-3 4 3 11¾ 13¾ 5½ 4¾
and permit excess stock to drop out of the system. SGH -5-3½ 5 3½ 12½ 15¼ 6 5¾
When overload condition is corrected, air speed naturally SGH -5-4 5 4 12½ 15¼ 6 5¾
increases and pulls gate back into place. SGH -5-4½ 5 4½ 12½ 15¾ 6 5¾
Standard with adjustable makeup air inlet.
SGH -6-5 6 5 13¼ 16¾ 7 6¾
Options: SGH -6-5½ 6 5½ 13¼ 17¼ 7 6¾
• Body size is determined by outlet diameter. If larger than SGH -6-6 6 6 13¼ 17¾ 7 6¾
standard inlet is required on given body size, inlet transition is SGH -8-8 8 8 15 23½ 9 11
required (as shown in upper right). SGH -10-10 10 10 18 28½ 10¾ 14
• Metric OD outlet sizes available on special order. Materials of Construction: 16 ga. 304L Stainless Steel
• Flanged connections. SGH-8-8 & SGH-10-10 are built slightly different than other sizes.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -40- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
PORTHOLE SIGHT GLASSES
Kice porthole sight glasses can be mounted on hoppers, tanks, silos, or any container with a flat side. Offers high visibility.
Replacement parts are also available.

Quick Access Porthole Sight Glass


GASKET
FRAME Kice Quick Access Porthole Sight Glass offers
a 5 3/4” round viewing area.

GASKET The unit has a Cast Aluminum frame and door.


There is a machined step in the Plexiglas for a
DOOR flush internal fit. With a 7½” diameter hole cut in
your flat surface, the Quick Access Porthole
Sight Glass can be bolted into place. It offers
two phenolic twist knobs that secure the door in
place.
ASSEMBLY
Available as an installed option on Kice Filters,
60° ¼” thick Polycarbonate Hoppers, and other equipment or as a
Typ component parts that can easily be installed in
the field.

10” Dia. 7 3/8” Dia.


PHENOLIC NOTE: NOT FOR USE ON OR NEAR
KNOB ROTATING EQUIPMENT.
(2 each)

6 each 5/16” diameter holes, 60° apart on 8 7/8” bolt


circle for 5/16” flat countersunk machine screw

Bolt-On Porthole Sight Glass

WELD FLANGE

Kice Bolt-On Porthole Sight Glass offers a full ¼” THK SIGHT GLASS
7½” round viewing area.
COVER FLANGE
The unit has a steel frame, with threaded studs,
that can be welded to any flat steel surface. HARDWARE
There is a machined step in the Plexiglas for a
flush internal fit. A 7½” hole should be cut into
the existing surface. The Cast Aluminum flange
aligns with the frame for easy installation. The
glass can be caulked for a tight seal.

Available as an installed option on Kice Filters,


Hoppers, and other equipment or as a
component parts that can easily be installed in 12ga or equiv.
the field.

NOTE: BOLT STYLE MAYBE USED NEAR


ROTATING EQUIPMENT. CAUTION IS 11” 7½”
REQUIRED IF GLASS IS REMOVED.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -41- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
HOSE AND HOSE CONNECTION PRODUCTS
In addition to rubber, Kice offers Kuriyama of America Tigerflex™ plastic hose as standard for many of our pneumatic handling
applications. Kuriyama and other manufacturers’ products are available. Please contact Kice Sales for more information.

TigerClamp™ Series SB Spiral Double Bolt Clamps. For use on Tigerflex™ hoses with convoluted cover (counter-clockwise spiral
only). For adequate holding power, a single clamp may be used on each end of 1½” - 4” ID hose. Two clamps are recommended for each
end on 5”ID hose and larger. Each clamp now provided with threaded protective caps to help prevent injury. TigerClamp™ Serial Double
Bolt Clamps are recommended for use on the following Tigerflex™ convoluted hoses: Series 2001, 2020, F, G, H, J, K, MH (2”), PT, S,
UBB, Ureflex-1, Ureflex-2, W, WBS, WE, WG, WH, WT, and WU.

Caution: Proper evaluation of holding power for clamp must be Fits Hose Fits Hose
determined for each individual installation. SERIES SERIES
ID (in.) ID (in.)

SDBC-1.5 1½" SDBC-5 5"


SDBC-2 2" SDBC-6 6"
SDBC-2.5 2½" SDBC-8 8"
SDBC-3 3" SDBC-10 10"
SDBC-4 4" SDBC-12 12"

Note: Use of pneumatic air tools for tightening purposes is not


recommended due to potential clamp damage by excess torque. Both
hex nuts should be tightened equally to prevent possible leakage. If
sockets are used, they should be deep well sockets.

The following table is a quick reference guide to hose commonly used by Kice Industries.
Contact Kice Techanical Sales or Kice QuikShip for complete hose technical specifications.
TAD 688SB 690SB WE WT FT CWC HAR VAC
Black Cover X X X
Gray Cover X X X
Clear Cover X X X
White Bore X X
Clear Bore X X X
Black Bore X X X
Pressure Rated X X X X X X X X
Vacuum Rated X X X X X X X X
Corrugated Cover X X X X X X X
Smooth Cover X
Wire Reinforced X X X X
Static Wire X X
FDA Approved X X X X X
Oil Resistant X
Number of Plys 4 2 2 2 2 2 2 2 1
Bend Radius (x Diameter) NA 8x 6x 2-4x 3-5x 4-8x 1x 3x 1x

Kice Industries can offer many other types, sizes, styles, and
manufacturers of hose beyond those listed.
Rubber and thermoplastics hose manufacturers such as Goodyear,
Gates, Flexhaust, Duravent, Boston, and Kuriyama of America manufacture
many different sizes, styles and types of hoses, many application specific. We
welcome your inquiries and will work to meet your plant requirement.
We can also provide different styles of flexible metal hoses and coupling
connections. Please contact Kice QuikShip or Kice Technical Sales with your
application.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -42- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
CAMLOCK CONNECTIONS
Kice camlock fittings are available from stock in Aluminum and Brass. Camlock connections meet MIL-C-27487 and are
interchangeable with other manufacturers connections through 6” size. Other materials & sizes available on special order.

Part “A” - Part “E” -


Male Camlock x FPT Male Camlock x Tube OD
PART NO. SIZE PART NO. SIZE L TUBE OD
20A 2" 20E 2" 4" 2"
25A 2½" 25E 2½" 4" 2½"
30A 3" 30E 3" 4" 3"
40A 4" 40E 4" 4" 4"
50A 5" L 50E 5" 4" 5"
60A 6" 60E 6" 4" 6"
Aluminum or Brass Aluminum or Brass with Steel Tube
Also available with beaded end

Part “B” - Part “F” -


Female Camlock x MPT Male Camlock x MPT
PART NO. SIZE PART NO. SIZE
20B 2" 20F 2"
25B 2½" 25F 2½"
30B 3" 30F 3"
40B 4" 40F 4"
50B 5" 50F 5"
60B 6" 60F 6"
Aluminum or Brass Aluminum or Brass

Part “C” - Part “V” -


Female Camlock x Tube OD Female Dust Cap
PART NO. SIZE L TUBE OD PART NO. SIZE
20C 2" 4" 2" 20V 2"
25C 2½" 4" 2½" 25V 2½"
30C 3" 4" 3" 30V 3"
40C 4" 4" 4" 40V 4"
L 50C 5" 4" 5" 50V 5"
60C 6" 4" 6" 60V 6"
Aluminum or Brass with Steel Tube Aluminum or Brass
Also available with beaded end Option: With 12” #3/16 safety chain

Part “D” - Part “W” -


Female Camlock x FPT Male Dust Plug
PART NO. SIZE PART NO. SIZE
20D 2" 20W 2"
25D 2½" 25W 2½"
30D 3" 30W 3"
40D 4" 40W 4"
50D 5" 50W 5"
60D 6" 60W 6"
Aluminum or Brass Aluminum or Brass
Option: With 12” #3/16 safety chain

Kice Camlock connections are 100% US manufactured. Other available materials include Carbon Steel, Stainless Steel,
Ductile Iron, Nylon, and Polypropylene. Many other sizes and types of connections also available. Note: Kice Camlock
parts “C” and “E” are not identical to other manufacturers, we bore and machine the common dust plug and dust cap to
meet our requirements. Contact Kice with your special requirements. A complete line of spare parts and accessories,
including replacement gaskets, cam arm assemblies, and safety chains, are available from Kice Industries.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -43- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
HOSE PRODUCTS
Kice offers Goodyear, Kuriyama, Flexhaust, and Dura-Vent hoses for many standard pneumatic handling applications.
Other manufacturers’ hose products, types, and styles are also available. Please contact Kice Sales for more information.

Tigerflex™ Series WE Heavy Duty PVC Food Grade material handling hose with embedded static wire. For dry applications.
Clear PVC construction, complies with all applicable FDA† and USDA‡ requirements. Allows visual confirmation that material is
flowing. Embedded static wire prevents the build up of static electricity and helps to keep material flowing smoothly. Smooth bore
construction eliminates material build-up. Convoluted cover design proved increased flexibility. Service Temperature range: - 4°F
to 150°F. Actual service temperature and pressure range is application dependent.

Working Vacuum Approx Minimum


SIZE SERIES ID OD Pressure Rating Weight Bend Radius
(PSI) (In. Hg) per Foot (in Inches)
2" WE200 2.00 2.40 40 28 0.58 4
2½" WE250 2.50 2.99 40 28 0.88 5
3" WE300 3.00 3.64 40 28 1.25 6
4" WE400 4.00 4.72 35 24 1.93 10
5" WE500 5.00 5.74 30 24 2.40 16
6" WE600 6.00 6.81 30 24 3.70 18
o o
PSI, HG, and Bend Radius rating based on 68 F, ratings less above 68 F

Flexhaust™ Series CWC material handling hose. For air, fume, dust control, and light weight conveying applications. Applications:
Sawdust removal, wood-working, fiber collection, drum filling. Construction: Black double-ply neoprene impregnated polyester fabric
supported with fully-enclosed spring steel wire for crush resistance. Smooth bore construction eliminates material build-up. Meets UL
Flame Retardant Standard UL 94V-O. Very short bend radius and high compressibility. Service Temperature range: - 40°F to 250°F.

Working Vacuum Approx Minimum


SIZE SERIES ID OD Pressure Rating Weight Bend Radius
(PSI) (In. Hg) per Foot (in Inches)
2" CWC200 2.00 2.25 30 29 0.26 2
3" CWC300 3.00 3.25 29 29 0.35 2½
4" CWC400 4.00 4.25 30 29 0.58 3½
6" CWC600 6.00 6.25 19 22 0.99 4½
8 CWC800 8.00 8.25 11 7 1.14 5½
10" CWC1000 10.00 10.25 9 4 1.42 7
12" CWC1200 12.00 12.25 7 2 1.64 8½

Dura-Vent Super Vac-U-Flex® Vacuum Hose. For vacuum applications. Application: Designed for commercial and/or industrial
vacuum cleaners and systems. Standard hose used with Kice Centro-Vac systems and components. Construction: Grey, with high
strength fiber reinforced PVC hose cover bonded to coated spring steel helix. Used with molded rubber, screw-on end cuffs. Service
Temperature range: - 20°F to 150°F.

Working Vacuum Approx Minimum


SIZE SERIES ID OD Pressure Rating Weight Bend Radius
(PSI) (In. Hg) per Foot (in Inches)
1¼" VAC125 1.25 1.45 45 27 0.20 1¼"
1½" VAC150 1.50 1.72 36 26 0.29 1½"
1¾" VAC175 1.75 1.97 35 26 0.34 1¾"
2" VAC200 2.00 2.22 26 25 0.41 2"
2¼" VAC225 2.25 2.47 23 25 0.44 2¼"
2½" VAC250 2.50 2.72 20 24 0.53 2½"
3" VAC300 3.00 3.18 20 24 0.62 3"
4" VAC400 4.00 4.28 14 18 1.08 4"
1¼" - 2½" available in 25' and 50' lengths. 3" - 4" available in 25' max lengths.
Kice Industries stocks 2" size only. Other sizes available for direct shipment.
Each 25' length comes with 2 each cuffs (one for each end).

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 08/01/04
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -44- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
MATERIALS OF CONSTRUCTION, TUBE DATA & FORMULAS
Kice Industries uses common materials of construction and has determined data based on these materials. Other materials of
construction are also available. Please contact Kice Technical Sales for help in determining correct material for your application.

STANDARD MATERIALS OF CONSTRUCTION


Carbon Steel:
Tubing: HREW, Hot Rolled, Electric Weld, Flash Controlled to 0.0015”
Plate: Hot Rolled to ASTM A36
Sheet: Hot Rolled to ASTM A569
Aluminum:
Tubing: Welded 3004H26 to ASTM B210
Barstock: 2024T3 - Heat Treatable, to ASTM A209 with Mill Finish
Plate: 3003H14 to ASTM B209 and 6061T6 to ASTM 209 with Mill Finish
Sheet: 3003H14 to ASTM B209 and 6061T6 to ASTM 209 with Mill Finish
304L Stainless Steel:
Tubing: Cold Finished, Annealed and Pickled, Welded to ASTM A249/A269
Plate: Cold Rolled, Annealed and Pickled to ASTM A240, with 2B Finish
(annealed, pickled, and bright cold rolled) outside, Mill Finish inside
Sheet: Cold Rolled, Annealed and Pickled to ASTM A240, with 2B Finish
(annealed, pickled, and bright cold rolled) outside, Mill Finish inside
Other materials are available from Kice Industries. Contact Technical Sales for more information.

COMMON OUTSIDE DIAMETER (OD) TUBING WALL THICKNESSES


TUBE GAUGE 18 17 16 15 14 13 12 11 1/8 10 9 5/32 8 7 3/16 6 1/4
WALL THICKNESS .049 .058 .065 .075 .083 .095 .109 .120 .125 .134 .148 .156 .165 .180 .188 .203 .250
Common OD tubing thickness used by Kice Industries, Inc. are noted in the bold boxes above.

TUBE DATA CHART


VELOCITY - FEET PER MINUTE
TUBE AREA 3500 @ .76 in.wc 4000 @ 1.0 in.wc 4500 @ 1.26 in.wc 5000 @ 1.55 in.wc 90o Ells
O.D. I.D. SQ. IN. SQ. FT. CFM in.wc/100' CFM in.wc/100' CFM in.wc/100' CFM in.wc/100' in Equiv.
1 1/2" 1.37" 1.48 .0103 36 15.0" 41 18.0" 46 22" 52 27.5" 4'
2" 1.87" 2.76 .0192 67 9.5" 77 13.0" 86 15.5" 96 18.75" 5'
2 1/2" 2.37" 4.43 .0308 105 6.5" 123 9.5" 138 11.0" 154 13.5" 6'
3" 2.87" 6.49 .0451 158 5.5" 180 7.5" 203 8.75" 225 11.0" 8'
3 1/2" 3.37" 8.95 .0621 217 4.75" 248 6.3" 280 7.75" 310 8.75" 9'
4" 3.87" 11.79 .0819 285 4.0" 328 5.3" 370 6.25" 410 7.5" 10'
4 1/2" 4.37" 15.02 .1043 365 3.5" 418 4.6" 469 5.5" 522 6.5" 11'
5" 4.87" 18.60 .1292 452 3.0" 517 4.0" 580 4.8" 646 5.75" 12'
5 1/2" 5.37" 22.70 .1576 552 2.6" 630 3.7" 710 4.3" 788 5.2" 14'
6" 5.87" 27.01 .1882 659 2.2" 753 3.3" 847 3.9" 941 4.6" 15'
8" 7.87" 48.70 .3382 1184 1.6" 1353 2.3" 1522 2.7" 1691 3.2" 20'
10" 9.75" 74.66 .5185 1815 1.3" 2074 1.7" 2333 2.1" 2593 2.9" 25'
12" 11.75" 108.43 .7530 2635 1.1" 3012 1.4" 3388 1.7" 3765 2.1" 30'
Tube ID and area based on .065" wall thickness, except 10" and 12"OD have .125" wall thickness.
Based on air @ .075 lbs/cu. ft. standard density.

USEFUL FORMULAS
• Area of a Circle (Sq. Ft.) = 3.1416 x r (or .7854 x D2)
2
• Standard air at 70oF and sea level weighs 0.075 lbs/cu ft
• Volume (CFM) = Velocity (Ft./Min.) x Area (Sq. Ft.) • 1 inch = 25.4 millimeters
• PV = Velocity Pressure, in.wc • 1 millimeter = 0.03937 inch
• 1" of Water Column (W.C.) = 0.03613 lbs. per sq. Inch • Temperature Conversion Formulas:
• For standard air, Velocity (Ft./Minute) = 4005 x PV • Celsius = .556 x (F-32)
• Fahrenheit = (1.8 x C)+32

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -45- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
PIPE & FLANGE DIMENSIONS
Kice Industries commonly uses 16 ga., 14 ga., and 11 ga. OD tubing for systems and product connections. Iron Pipe
Size is also used when specified by the customer. Please use these charts to help determine your system requirements.

COMMON IRON PIPE SIZE (IPS) PIPE DIMENSIONS AND WEIGHTS


PIPE SCHEDULES
PIPE OD in 5S 5 10S 10 40S & STD 40 80S & EH 80
SIZE INCHES Wall Wt/ft Wall Wt/ft Wall Wt/ft Wall Wt/ft Wall Wt/ft Wall Wt/ft Wall Wt/ft Wall Wt/ft
1/8" .405 --- --- .035 .1383 .049 .1863 .049 .1863 .068 .2447 .068 .2447 .095 .3145 .095 .3145
1/4" .540 --- --- .049 .2570 .065 .3297 .065 .3297 .088 .4248 .088 .4248 .119 .7388 .119 .5351
3/8" .675 --- --- .049 .3276 .065 .4235 .065 .4235 .091 .5676 .091 .5676 .126 .7388 .126 .7388
1/2" .840 .065 .5383 .083 .6710 .083 .6710 .109 .8510 .109 .8510 .109 .8510 .109 .8510 .147 1.09
3/4" 1.050 .065 .6838 .065 .6838 .083 .8572 .083 .8572 .113 1.131 .113 1.131 .154 1.474 .154 1.474
1" 1.315 .065 .8678 .065 .8678 .109 1.404 .109 1.404 .133 1.679 .133 1.679 .179 2.172 .179 2.172
1 1/4" 1.660 .065 1.107 .065 1.107 .109 1.806 .109 1.806 .140 2.723 .140 2.723 .191 2.997 .191 2.997
1 1/2" 1.900 .065 1.274 .065 1.274 .109 2.085 .109 2.085 .145 2.718 .145 2.718 .200 3.631 .200 3.631
2" 2.375 .065 1.604 .065 1.604 .109 2.638 .109 2.638 .154 3.653 .154 3.653 .218 5.022 .218 5.022
2 1/2" 2.875 .083 2.475 .083 2.475 .120 3.531 .120 3.531 .203 5.793 .203 5.793 .276 7.661 .276 7.661
3" 3.500 .083 3.209 .083 3.209 .120 4.332 .120 4.332 .216 7.576 .216 7.576 .300 10.25 .300 10.25
3 1/2" 4.000 .083 3.472 .083 3.472 .120 4.937 .120 4.937 .226 9.109 .226 9.109 .318 12.51 .318 12.51
4" 4.500 .083 3.915 .083 3.915 .120 5.613 .120 5.613 .237 10.79 .237 10.79 .337 14.98 .337 14.98
4½" 5.000 --- --- --- --- --- --- --- --- .247 12.54 --- --- .355 17.61 --- ---
5" 5.563 .109 6.349 .109 6.349 .134 7.770 .134 7.770 .258 14.62 .258 14.62 .375 20.78 .375 20.78
6" 6.625 .109 7.585 .109 7.585 .134 9.290 .134 9.290 .280 18.97 .280 18.97 .432 28.57 .432 28.57
7" 7.625 --- --- --- --- --- --- --- --- .301 23.54 --- --- .500 38.04 --- ---
8" 8.625 .109 9.914 .109 9.914 .148 13.40 .148 13.40 .322 28.55 .322 28.55 .500 43.39 .500 43.39
9" 9.625 --- --- --- --- --- --- --- --- .342 33.91 --- --- .500 48.73 --- ---
10" 10.75 .134 15.19 .134 15.19 .165 18.65 .165 18.65 .365 40.48 .365 40.48 .500 54.74 .500 54.74
11" 11.75 --- --- --- --- --- --- --- --- .375 45.56 --- --- .500 60.08 --- ---
12" 12.75 .156 21.07 .165 22.18 .180 24.16 .180 24.16 .375 49.56 .406 53.52 .500 65.42 .688 88.63
14" 14.00 .156 23.07 --- --- .188 27.73 .250 45.61 .375 54.57 .438 63.44 .500 72.09 .750 106.1
16" 16.00 .165 27.90 --- --- .188 31.75 .250 52.27 .375 62.58 .500 82.77 .500 82.77 .844 136.6
18" 18.00 .165 31.43 --- --- .188 35.76 .250 58.94 .375 70.59 .562 104.7 .500 93.45 .938 170.9
20" 20.00 .188 39.78 --- --- .218 46.05 .250 78.60 .375 78.60 .594 123.1 .500 104.1 1.031 208.9
Although pipe size products are not common in Kice equipment, they are used. This is a guildline for
determining if your project requires nominal pipe size (IPS) or Outside Diameter (OD) tubing.

BASIC DIMENSIONS FOR ANSI 150# FLANGES


Iron Pipe Size (IPS) 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4"
Outside Diameter 3 1/2" 3 7/8" 4 1/4" 4 5/8" 5" 6" 7" 7 1/2" 8 1/2" 9"
Bolt Circle 2 3/8" 2 3/4" 3 1/8" 3 1/2" 3 7/8" 4 3/4" 5 1/2" 6" 7" 7 1/2"
Number of Bolt Holes 4 4 4 4 4 4 4 4 8 8
Diameter of Bolt Holes 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4"

Iron Pipe Size (IPS) 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
Outside Diameter 10" 11" 13 1/2" 16" 19" 21" 23 1/2" 25" 27 1/2" 32"
Bolt Circle 8 1/2" 9 1/2" 11 3/4" 14 1/4" 17" 18 3/4" 21 1/4" 22 3/4" 25" 29 1/2"
Number of Bolt Holes 8 8 8 12 12 12 16 16 20 20
Diameter of Bolt Holes 7/8" 7/8" 7/8" 1" 1" 1 1/8" 1 1/8" 1 1/4" 1 1/4" 1 5/16"
Flange thicknesses vary depending on type of flange.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -46- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
KICE AIRLOCK ROUND AND SQUARE FLANGE DIMENSIONS
Kice Speed Spout is often connected to Kice Airlocks, Cyclones, and other Kice equipment. Below are the typical
flange dimensions for Kice Round & Square VJ & VJOT, Square VD & VDOT, and Round VB & VBOT Kice Airlocks.

VJ & VJOT Body


Model A B C D E F
VJ & VJOT 8x6x6 5¾ 9 3 1/8 2 1/8 --- 3/8" UNC
VJ & VJOT 10x8x8 7¾ 11 3¼ 3¼ --- 3/8" UNC
VJ & VJOT 12x8x8 7¾ 11 3¼ 3¼ --- 3/8" UNC D C D
VJ & VJOT 14x10x10 9¾ 13¼ 3 7/8 3 7/8 --- 3/8" UNC
VJ & VJOT 16x12x12 11¾ 15¼ 4½ 4½ --- 3/8" UNC
VJ & VJOT 18x12x12 11¾ 15¼ 4½ 4½ --- 3/8" UNC
VJ & VJOT 18x14x14 13¾ 17¼ 5¼ 5¼ --- 3/8" UNC
VJ & VJOT 20x12x12 11¾ 15¼ 4½ 4½ --- 3/8" UNC
VJ & VJOT 20x15x15 14¾ 18¼ 5½ 5½ --- 3/8" UNC
VJ & VJOT 24x15x15 14¾ 18¼ 5½ 5½ --- 3/8" UNC
VJ & VJOT 30x24x24 24 29 1/16 0 4½ 24 holes 5/8" UNC B SQ.
A SQ.
VD & VDOT Body
Model A B C D E F
VD 6x6x6 6 9¼ 3 1/8 2 1/8 7/16 ---
VD & VDOT 8x6x6 6 9¼ 3 1/8 2 1/8 7/16 ---
VD & VDOT 10x6x6 6 9¼ 3 1/8 2 1/8 7/16 ---
VD & VDOT 10x8x8 8 11¼ 3¼ 3¼ 7/16 ---
VD & VDOT 12x8x8 8 11¼ 3¼ 3¼ 7/16 ---
E - HOLE DIAMETER WHEN DRILLED
VD & VDOT 14x10x10 10 13¼ 3 7/8 3 7/8 7/16 --- F - TAP SIZE FOR VJOT SERIES
VD & VDOT 16x12x12 12 15 3/8 4½ 4½ 7/16 ---
VD & VDOT 18x12x12 12 15 3/8 4½ 4½ 7/16 ---
VD & VDOT 18x14x14 14 17 3/8 5¼ 5¼ 7/16 ---
VD & VDOT 20x12x12 12 15 3/8 4½ 4½ 7/16 ---
VD & VDOT 20x15x15 15 18 3/8 5½ 5½ 7/16 ---
VD & VDOT 24x15x15 15 18 3/8 5½ 5½ 7/16 ---

VJ & VJOT Body


Model A B C E F G
VJ 6x6 5¾ 9 8 --- 3/8" UNC 45 deg. 8
F VJ & VJOT 8x6 5¾ 9 8 --- 3/8" UNC 45 deg. 8
VJ & VJOT 10x8 7¾ 11 10 --- 3/8" UNC 45 deg. 8

C VB & VBOT Body


Model A B C D F G
B VB 6x6 6 9¼ 8 7/16 --- 45 deg. 8
A
VB & VBOT 8x6 6 9¼ 8 7/16 --- 45 deg. 8
VB & VBOT 10x6 6 9¼ 8 7/16 --- 45 deg. 8
VB & VBOT 10x8 8 11¼ 10 7/16 --- 45 deg. 8
VB & VBOT 12x8 8 11¼ 10 7/16 --- 45 deg. 8
VB & VBOT 14x10 10 13¼ 12 7/16 --- 45 deg. 8
VB & VBOT 16x12 12 15 3/8 14 7/16 --- 45 deg. 8
VB & VBOT 18x12 12 15 3/8 14 7/16 --- 45 deg. 8
VB & VBOT 18x14 14 17 3/8 16 7/16 --- 45 deg. 8
D - HOLE DIAMETER WHEN DRILLED VB & VBOT 20x12 12 15 3/8 14 7/16 --- 45 deg. 8
E - TAP SIZE FOR VJOT SERIES
G - NUMBER OF BOLT HOLES VB & VBOT 20x15 15 18 3/8 16¾ 7/16 --- 30 deg. 12
VB & VBOT 24x15 15 18 3/8 16¾ 7/16 --- 30 deg. 12

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -47- Toll-Free: 877-289-5423 / Fax: (316) 744-9649
ELECTRICAL ENCLOSURE CLASSIFICATIONS AND TYPES
Type 4X and Type 7/9 solenoid valve enclosures, coils and position switches are used on Kice OEM automated packages.
This chart will help explain various types. Kice can supply other Nema rated enclosures and equipment upon request.

Solenoid Enclosures Common Enclosure Classifications and Types


Kice AV solenoid valve coils:
Type 4X version has a one-piece molded Type 1 — General Purpose: Intended for indoor use, primarily to provide
epoxy construction with DIN-type terminals protection for enclosed parts in locations without unusual service
meeting ISO 4400 and DIN standard 43650. conditions.
Coils are marked with voltage and power Type 2 — Dripproof: Intended for indoor use, primarily to provide
consumption rating. Coils are replaceable protection against limited amounts of falling water or dirt.
without replacing entire solenoid valve. DIN Type 3 — Raintight, Dusttight, and Sleet (Ice) Resistant: Intended for
connector standard with ½” NPT conduit outdoor use, primarily to provide protection against wind-blown dust, rain,
connection. Type 4X enclosures also meet Types and sleet; undamaged by the formation of ice on the enclosure.
2 Dripproof, 3, 3S Raintight, and 4. Type 3R — Raintight, Sleet (Ice) Resistant: Intended for outdoor use,
Explosion Proof version (covers Types 4X, primarily to provide protection against falling rain and sleet; undamaged by
7 C&D, and 9, E, F & G UL; Class I Div. 2 A, B, C, the formation of ice on the enclosure.
& D, Class I C & D; Class II E, F, & G) is a metallic Type 3S — Raintight, Dusttight, and Sleet (Ice) Resistant: Intended for
enclosure with enclosed coil and ½” NPT conduit outdoor use, primarily to provide protection against wind-blown dust, rain,
connection with 18” leads. Coils are marked with and sleet; external mechanism remains operable when ice laden.
voltage and power consumption ratings. Coils Type 4 — Watertight and Dusttight: Intended for indoor or outdoor use
are replaceable without replacing entire solenoid to provide protection against splashing water, water seepage, falling or
valve. hose-directed water, and severe external condensation; undamaged by
Kice can supply other OEM solenoid valves the formation of ice on the enclosure.
and position switches upon request. Type 4X — Watertight, Dusttight, and Corrosion Resistant: Same as
Type 4, but provides additional protection to resist corrosion.
Kice ASCO solenoid valve coils: Type 6 — Submersible: Intended for indoor or outdoor use to provide
These solenoid valves are common on Kice protection against entry of water during submersion at a limited depth.
3” Pneujet Valve used on Kice Filters and are (Tested to 6' for 30 minutes).
commonly sold though our Kice QuikShip Center. Type 6P — Submersible: Same as Type 6 Enclosure, but provides
Type 1 General Purpose is a green ASCO prolonged submersion protection at a limited depth. (Tested to 6' for 24
Red Hat II® solenoid enclosure of one-piece hours).
molded epoxy construction with an integral ½” Type 7 (A, B, C & D) — Explosionproof: Designed to contain an internal
NPT conduit hub. The epoxy encapsulation explosion, without causing an external hazard, when installed in the
serves as the enclosure. The magnetic frame is following atmospheres or locations: Class I - Gasses & Vapors; Division 1
molded into the coil. Type 1 enclosures come (Groups A, B, C, & D) and Division 2 (Groups A, B, C, & D).
equipped with three (3) 18” long leads (the green Type 9 (E, F, & G) — Dust-ignitionproof: Designed to prevent the
lead is the ground wire). Type 1 enclosures also entrance of dust, and the enclosed devices do not produce sufficient heat
meet Type 2 Dripproof, 3, 3S Raintight, and 4 and to cause external surface temperatures capable of igniting dust on the
4X Watertight-Corrosion Resistant classification. enclosure or in the surrounding atmosphere. Meets Class II - Dust;
Type 7 (A, B, C & D) Explosion Proof is a Division 1 (Groups E, F, & G) and Division 2 (Groups E, F, & G).
black ASCO Red Hat II® solenoid enclosure of
one-piece molded epoxy construction with Other Nema Types of enclosures are available. Short
integral ½” NPT conduit hub. The epoxy descriptions on other types are listed below. Consult Nema standards for
encapsulation serves as the enclosure. The complete and detailed information:
magnetic frame is molded into the coil. Type 7
enclosures come equipped with three (3) 18” Type 5: Type 4/4X meets Type 5 requirement of Type 5. Deals with
long leads (the green lead is the ground wire). “settling airborne dust, lint, fibers, and flyings”.
Type 7 enclosures meet Types 1, 2 Dripproof, 3, Type 10: Enclosures constructed to meet the requirements of the Mine
3S Raintight, 4, and 4X Watertight-Corrosion Safety and Health Administration, 30 CFR, Part 18.
Resistant classification construction as well as Type 12: Type 4/4X meets Type 12 requirements, except for additional
Type 6 and 6P Submersible, Type 7 (A, B, C & D) standards regarding oil and coolant seepage. Specifies indoor use without
Explosionproof and Type 9 (E, F, & G) Dust- knockouts in enclosures.
Ignitionproof for Class I, Division 1, Groups A, B, Type 12K: Type 4/4X meets Type 12K requirements, except for additional
C, and D, and Class II, Division 1, Groups E, F, & standards regarding oil and coolant seepage. Specifies indoor use with
G. Type 7 Explosionproof solenoids include an knockouts in enclosures.
internal, non-resettable thermal fuse to limit Type 13: Type 4/4X meets requirements, except for additional standards
solenoid temperature in the event that regarding oil and coolant seepage, spraying, and splashing. Specifies
extraordinary conditions occur which could indoor use.
cause excessive temperatures.

KICE INDUSTRIES, INC. “Skilled Air for Industry”


5500 Mill Heights Dr. Date: 11/01/05
Wichita, KS 67219 Speed Spout Technical Manual
Phone: (316) 744-7151 / Fax: (316) 744-7355 Kice QUIKSHIP: e-mail: [email protected]
e-mail: [email protected] / website: www.kice.com -48- Toll-Free: 877-289-5423 / Fax: (316) 744-9649

You might also like