Scribd
Upload
62 views6 pages

Assignment #4

Mec E 250 Assign 4

Uploaded by

rghotra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views6 pages

Assignment #4

Mec E 250 Assign 4

Uploaded by

rghotra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

MEC E 250

ASSIGNMENT #4
1.

At the instant shown, ball B is rolling along the slot in the z


disk with a velocity of 600 mm>s and an acceleration of v  6 rad/s
150 mm>s2, both measured relative to the disk and directed a  3 rad/s2
away from O. If at the same instant the disk has the angular
velocity and angular acceleration shown, determine the
velocity and acceleration of the ball at this instant. O
0.8 m
B
0.4 m

x y
2.

Rod AB rotates counterclockwise with a constant angular C B


velocity v = 3 rad>s. Determine the velocity and acceleration
of point C located on the double collar when u = 45°. The
collar consists of two pin-connected slider blocks which are
constrained to move along the circular path and the rod AB.
v = 3 rad/s
u
A

0.4 m
3.

At the instant shown rod AB has an angular velocity vAB 4 rad/s


vAB = 4 rad>s and an angular acceleration aAB = 2 rad>s2. A aAB 2 rad/s2
Determine the angular velocity and angular acceleration of
rod CD at this instant.The collar at C is pin connected to CD
60 0.5 m
and slides freely along AB.
0.75 m
C D

B
4.

Peg B on the gear slides freely along the slot in link AB. If 150 mm B
the gear’s center O moves with the velocity and
vO  3 m/s
acceleration shown, determine the angular velocity and aO  1.5 m/s2 600 mm
angular acceleration of the link at this instant.
O
150 mm
A
5.

The disk rotates with the angular motion shown. Determine


the angular velocity and angular acceleration of the slotted A
link AC at this instant. The peg at B is fixed to the disk.
0.75 m
30

0.3 m B

30

v  6 rad/s
a  10 rad/s2 C

You might also like