7210 Sas-K5
7210 Sas-K5
Release 11
The Nokia 7210 Service Access Switch (SAS)-K-series switches and routers
are used in access networks for network demarcation in enterprise business
services, for wholesale services and mobile anyhaul applications. The
7210 SAS-K-series routers extend secure Carrier Ethernet connectivity
along with IP/MPLS services and reliability to the network access points.
1 Data Sheet
Nokia 7210 SAS-K series
• 7210 SAS-K-series routers and switches can Quality of service and network
be used for secure access at macro and small performance
cell sites, where only a few GE or Fast Ethernet Most data traffic is inherently bursty. To avoid
connections are required. dropped packets, the 7210 SAS-K-series routers
• 7210 SAS-K-series routers and switches can are equipped with deep buffers on both ingress
enable service providers to undertake Carrier and egress, providing hierarchical queuing and
Ethernet transformation projects and evolve shaping. This translates into less packet loss, fewer
to packet-based network architectures with retransmissions, more efficient use of bandwidth,
converged IP voice, data, and video running over and greater customer satisfaction. Optional per-SAP
Layer 2 or 3 VPNs. The routers and switches policing on ingress allows the service provider to
offer enterprises cost-effective access points enforce contracted data rates and reduces latency
with highly reliable Ethernet switching or IP/MPLS as it avoids buffering in queues. Together, these
routing along with hierarchical quality of service QoS features deliver more accurate and flexible
(QoS) to accommodate both mission-critical and SLA enforcement than what is provided with simple
business services traffic. policing to provide the best quality of experience
for all applications.
Benefits Secure, flexible, reliable service
Investment protection deployment
7210 SAS-K-series routers use Nokia silicon to 7210 SAS-K series routers offer reliable, low-
deliver unique capabilities required for network maintenance operation in a wide variety of
interface devices (NIDs), including deep buffers deployment scenarios due to their passive cooling,
on ingress and egress, hierarchical queuing extended temperature ranges and up to IP50 rating.
and shaping, service scaling, as well as precise They are equipped with both copper and fiber GE
diagnostics and timing. Having a programmable access ports. MACsec provides authentication and
datapath allows new capabilities to be added in encryption for all traffic on Ethernet links.
the future, extending device lifetime in the field.
2 Data Sheet
Nokia 7210 SAS-K series
Load balancing and resiliency Security
• IEEE 802.3.ad Link Aggregation Group (LAG) • Secure Shell (SSH) v4 and v6 for management
• ITU-T G.8032v2 • IEEE 802.1x on access ports
• IEEE Spanning Tree Protocol (STP)/Rapid Spanning • Control plane security
Tree Protocol (RSTP)/Multiple Spanning Tree • Management access filters
Protocol (MSTP)
• Remote Authentication Dial-In User Service
Quality of Service (RADIUS) client
• Service ingress packet classification based on • Terminal Access Concentrator Access Control
MAC and IP criteria (IPv4 and IPv6), MPLS EXP Server Plus (TACACS+)
on network ingress.
• User profile management
• Hierarchical per-service ingress and egress
• VPLS security
policing, queuing, and shaping
• Access control lists
• Deep buffering
• RED slope
Additional 7210 SAS-K12
• Self-generated traffic marking
OAM
and SAS-K30 features
• IEEE 802.3ah Ethernet in the first mile with Services
Dying Gasp support • IP VPN services (IPv4 and IPv6)
• IEEE 802.1ag Ethernet OAM and ITU-T Y.1731 • Internet Enhanced Service (IPv4 and IPv6)
for fault and performance management
• Routed VPLS with IES and virtual private routed
• Service mirroring (local/remote) network (VPRN) IPv4 interfaces
• Two-Way Active Measurement Protocol (TWAMP), • IPv4 multicast
TWAMP light
Networking protocols
• ITU-T Y.1564 test head with multiple streams
• Segment routing
(with EMIX/IMIX frame-size) and service
performance measurement – Intermediate System-to-Intermediate System
(IS-IS) and Open Shortest Path First (OSPF)
• Per port loopback
– Loop-free alternate (LFA) and remote
• Per service loopback with MAC swap
LFA (RLFA)
• Link Layer Discovery Protocol (LLDP)
• Path Computation Element Protocol (PCEP)
• NETCONF/YANG
– Resource Reservation Protocol (RSVP)
• SNMPv1, v2c, v3
• MPLS Label Edge Router (LER) and Label Switch
• Ethernet and IP tools for performance monitoring Router (LSR).
with MEF 35-based binning and availability
– Label Distribution Protocol (LDP) and Targeted
• PTP-based timestamps for service level LDP (T-LDP)
agreement measurements
– Resource Reservation Protocol — Traffic
• Remote SR OS upgrade Engineering (RSVP-TE)
• Auto-configuration (plug-and-play)
3 Data Sheet
Nokia 7210 SAS-K series
• IP routing OAM
– Intermediate System-to-Intermediate System • MPLS OAM for in-service performance
(IS-IS) (IPv4 and IPv6), including traffic management (delay, jitter, and packet loss)
engineering (TE) support for IPv4 and fault management
– Open Shortest Path First (OSPFv2 and OSPFv3) • IPv6 for management
including TE support for IPv4
Security
– IPv4 unnumbered with MPLS
• Per-port MAC security (MACsec)
– Border Gateway Protocol (BGP)
• Strict unicast Reverse Path Forwarding
– BGP label unicast routes as defined in RFC 3107 (uRPF)
with Accumulated Interior Gateway Protocol
(AIGP) support
– BGP-AD for VPLS auto-discovery
– BGP pseudowire routing for multi-segment
pseudowires
• Protocol Independent Multicast (PIM) – Sparse
mode (SM), Source Specific Multicast (SSM)
and IGMPv1/2/3
• IGMPv1/2/3 snooping
4 Data Sheet
Nokia 7210 SAS-K series
Hardware overview
Table 1. 7210 SAS-K-series specifications
7210 SAS-K30 ETR 7210 SAS-K12 7210 SAS-K5
(2 variants: standard and ETR) (2 variants: standard and ETR)
System throughput 60 Gb/s wire speed 18 Gb/s wire speed 10 Gb/s wire speed
Half duplex, IMIX traffic
Network transport IP/MPLS/Ethernet IP/MPLS/Ethernet Ethernet
Interfaces • 3 x SFP+ 10GE • 2 x SFP 100/1000 Mb/s • 2 x SFP 100/1000 Mb/s
• 8 x Combo SFP/RJ-45 • 4 x RJ-45 10/100/1000 Mb/s • 2 x RJ-45 10/100/1000 Mb/s
10/100/1000 Mb/s • 6 x Combo SFP/RJ-45 10/100/1000 Mb/s • 1 x Combo SFP/RJ-45 10/100/1000 Mb/s
Timing and • ITU-T SyncE with Ethernet • ITU-T SyncE with ESMC • ITU-T SyncE with ESMC
synchronization Synchronization Messaging • IEEE 1588v2 • IEEE 1588v2
Channel (ESMC)
– BC, OC-slave – BC, OC-slave
• IEEE 1588v2
– UDP/IP and Ethernet encapsulation – UDP/IP encapsulation
– Boundary Clock (BC), – Profiles: IEEE 1588v2 default, – Profiles: IEEE 1588v2 default,
Ordinary Clock (OC) - slave ITU-T G.8265.1, G.8275.1 G.8265.1
– User Datagram Protocol • 1PPS on ETR variant
(UDP)/IP and Ethernet
encapsulation
– Profiles: IEEE 1588v2
default, ITU-T G.8265.1,
G.8275.1
• 1PPS
MACsec Yes ETR variant No
Extended buffering Ingress, egress Ingress, egress Ingress, egress
and shaping 512 MB buffer 64 MB buffer 64 MB buffer
IP rating IP20 7210 SAS-K12: IP50 IP50 (both variants)
7210 SAS-K12 ETR: IP20
Dimensions • Height: 8.8 cm (3.5 in) 2RU 7210 SAS-K12: 7210 SAS-K5:
• Width: 43.8 cm (17.2 in) • Height: 3.5 cm (1.4 in) 1RU • Height: 3.5 cm (1.4 in) 1RU
• Depth: 25.2 cm (9.9 in) • Width: 29.5 cm (11.6 in) • Width: 18.4 cm (7.2 in)
• Depth: 21.8 cm (8.6 in) • Depth: 21.8 cm (8.6 in)
7210 SAS-K12 (ETR): 7210 SAS-K5 (ETR):
• Height: 6.6cm (2.6 in) 1.5RU • Height: 4.1 cm (1.6 in) 1RU
• Width: 33.9cm (13.35in) • Width: 18.4 cm (7.2 in)
• Depth: 24.0cm (9.45in - ETSI) • Depth: 21.8 cm (8.6 in)
Power supply options • Two feeds. Two fixed internal • 7210 SAS-K12: One feed. External • 7210 SAS-K5: One feed. External
AC power supplies and one AC or DC power supply AC or DC power supply
fixed internal DC power supply. • 7210 SAS-K12 (ETR): Two feeds. • 7210 SAS-K5 (ETR): Two feeds.
External AC or DC power supplies. External AC or DC power supplies.
Supports concurrent use of AC and Supports concurrent use of AC and
DC power DC power
• AC, -48 V DC and +24 V DC power • AC, -48 V DC and +24 V DC power
supplies are available supplies are available
Power requirements • AC input: 100 V to 240 V, • AC input: 100 V to 240 V, 50 Hz to 60 Hz • AC input: 100 V to 240 V, 50 Hz to 60 Hz
50 Hz to 60 Hz • DC input: -36 V DC to -72 V DC • DC input: -36 V DC to -72 V DC
• DC input: -18 V DC to -72 V DC • DC input: +20 V DC to +28 V DC
Cooling Passive cooling Passive cooling Passive cooling
Temperature -40°C to +65°C (-40°F to +149°F) • 7210 SAS-K12: 0°C to 40°C • 7210 SAS-K5: 0°C to 40°C
operating range (32°F to 104°F) (32°F to 104°F)
• 7210 SAS-K5 (ETR): -40°C to +65°C • 7210 SAS-K5 (ETR): -40°C to +65°C
(-40°F to +149°F) (-40°F to +149°F)
5 Data Sheet
Nokia 7210 SAS-K series
Technical specifications1 • IEC CISPR 32 Class A
• IEC/EN 61000-3-2 Power line harmonics2
Environmental specifications • IEC/EN 61000-3-3 Voltage fluctuations2
• ATT-TP-76200
• IEC/EN 61000-4-2 ESD
• ETSI EN 300 019-2-1 Storage
• IEC/EN 61000-4-3 Radiated Immunity
• ETSI EN 300 019-2-2 Transportation
• IEC/EN 61000-4-4 EFT
• ETSI EN 300 019-2-3 Operational
• IEC/EN 61000-4-5 Surge
• GR-63-CORE
• IEC/EN 61000-4-6 Conducted Immunity
• VZ.TPR.92052
• IEC/EN 61000-4-11 Voltage Interruptions
• RoHS 6/6 design
• IEC/EN 61000-6-2 Industrial2
Safety • IEC/EN 61000-6-42
• IEC/EN 60825-1
• KCC Korea-Emission & Immunity
• IEC/EN 60825-2 (in accordance with KN32/KN35)
• AS/NZS 60950-1 • VCCI Class A
• IEC/EN/UL/CSA 60950-1 Ed2
Power utility substations
• AS/NZS 62368-12 • IEC 61850-33
• IEC/EN/UL/CSA 62368-1 Ed22 • IEEE 16133
Electromagnetic compatibility Railway
• AS/NZS CISPR 32 Class A • EN 50121-42
• BSMI CNS13438 Class A2 • IEC 62236-42
• BT GS-72
Directives, regional approvals and certifications
• EN 55024 • DIRECTIVE 2011/65/EU RoHS
• EN 55032 Class A • DIRECTIVE 2012/19/EU WEEE
• ETSI EN 300 132-2 (LVDC)2 • DIRECTIVE 2014/30/EU EMC
• ETSI EN 300 132-3 (AC)2 • DIRECTIVE 2014/35/EU LVD
• ETSI EN 300 386 • NEBS Level 3
• ETSI ES 201 468 • Australia - RCM Mark
• FCC Part 15 Class A • China RoHS – CRoHS
• GR-1089-CORE • Europe – CE Mark
• ICES-003 Class A • Japan – VCCI Mark
• IEC CISPR 24 • South Korea – KC Mark
1 System design intent is according to the listed standards. Certifications vary on different models. Certifications applicable to specific models are noted.
Refer to product documentation for detailed compliance status.
2 Applicable to specific models
3 Applicable to ETR models
6 Data Sheet
Nokia 7210 SAS-K series
About Nokia
We create the technology to connect the world. Powered by the research and innovation of Nokia Bell Labs, we serve communications service providers, governments,
large enterprises and consumers, with the industry’s most complete, end-to-end portfolio of products, services and licensing.
From the enabling infrastructure for 5G and the Internet of Things, to emerging applications in digital health, we are shaping the future of technology to transform
the human experience. networks.nokia.com
Nokia operates a policy of ongoing development and has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors
and omissions. Nokia assumes no responsibility for any inaccuracies in this document and reserves the right to change, modify, transfer, or otherwise revise this publication
without notice.
Nokia is a registered trademark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their respective owners.
© 2020 Nokia
Nokia Oyj
Karaportti 3
FI-02610 Espoo, Finland
Tel. +358 (0) 10 44 88 000