Scribd
Upload
10 views

Assignment 1

Uploaded by

cactusvernal123
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
10 views

Assignment 1

Uploaded by

cactusvernal123
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Assignment-1

(Submission date on or before 1st Nov 2024)


1. How does the addition of a filter capacitor affect the output voltage and ripples in
a rectifier circuit, derive the mathematical expression for the same?

2. a) Design the network of Fig. shown in below to maintain VL at 12 V for a load


variation (IL) from 0 mA to 200 mA. That is, determine RS and VZ.

b) Determine PZ max for the Zener diode of part (a).

3. For the network of Fig. shown below, determine the range of Vi that will maintain
VL at 8 V and not exceed the maximum power rating of the Zener diode.

4. Design a voltage regulator that will maintain an output voltage of 20 V across a


1kΩ load with an input that will vary between 30 V and 50 V. That is, determine
the proper value of RS and the maximum current IZM.
5. Sketch VO for the network of Fig. shown below and determine the dc voltage
available.

6. Sketch VO for the network of Fig. shown below and determine the dc voltage
available.

7. Consider the diode circuit shown in below figure. Determine the output voltage
for Vin=50 V, Vin=80 V and Vin=180 V.
8. For the silicon PN junction diode circuit shown in below figure, find the value of
current through the diode D2.

9. Determine the circuit conditions and sketch the output waveform for the below
given circuit, for the given input waveform.

10. For the network shown in below figure


a. Calculate 5τ.
b. Compare 5τ to half the period of the applied signal.
c. Sketch VO

You might also like