International Standards in process

ISO/CD 23719 Cereals and cereal products — Determination of

17 mycotoxins by ultra high performance liquid
chromatography and tandem mass spectrometry
An International Standard is the result of an agreement between
method (UHPLC-MS/MS)
the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for ISO/CD 22170 Masala chai/tea powder — Definition and
study within an ISO technical committee. When consensus has been characteristics
reached within the technical committee, the document is sent to the Cen-
tral Secretariat for processing as a draft International Standard (DIS). The
TC 35 Paints and varnishes
DIS requires approval by at least 75 % of the member bodies casting a vote. ISO/CD 11124-6 Preparation of steel substrates before application
A confirmation vote is subsequently carried out on a final draft Internation- of paints and related products — Specifications for
al Standard (FDIS), the approval criteria remaining the same. metallic blast-cleaning abrasives — Part 6: Stain-
less steel shot
ISO/CD 11124-7 Preparation of steel substrates before application
of paints and related products — Specifications
for metallic blast-cleaning abrasives — Part 7: high
chromium cast iron grit
ISO/CD 11125-5 Preparation of steel substrates before application
of paints and related products — Test methods for

CD registered metallic blast-cleaning abrasives — Part 5: Deter-

mination of percentage defective particles and of
microstructure
ISO/CD 11126-1 Preparation of steel substrates before application
Period from 01 March to 01 April 2024 of paints and related products — Specifications
for non-metallic blast-cleaning abrasives — Part 1:
These documents are currently under consideration in the technical
General introduction and classification
committee.
They have been registered at the Central Secretariat.
TC 37 Language and terminology
ISO/CD 24495-2 Plain language — Part 2: Legal Communication

TC 8 Ships and marine technology TC 38 Textiles

ISO/CD 22120 Ships and marine technology — Specification for ISO/CD 22195-9 Textiles — Determination of index ingredient from
bunkering of methanol fuelled vessels coloured textile — Part 9: Gallnut

TC 20 Aircraft and space vehicles IEC/CD 63517 Wearable electronic textiles — Test method for
performance of heating products
ISO/CD 16615 Space systems — Stable operation requirements
for satellite attitude and orbit control system ISO/CD 1130 Textile fibres — Some methods of sampling for
testing
ISO/CD 22552 Space systems — Manufacturing readiness review
TC 42 Photography
TC 22 Road vehicles
ISO/CD 18383 Digital imaging — Specification guideline for
ISO/CD Road vehicles — Component test methods for digital cameras
11452-11.2 electrical disturbances from narrowband radiated
electromagnetic energy — Part 11: Reverberation ISO/CD PAS Imaging materials — Image permanence specifica-
chamber 18940-1 tion of reflection photographic prints for indoor
applications — Part 1: Test methods
TC 27 Coal and coke
ISO/CD 21496-1 Digital Photography — Gain map metadata for
ISO/CD 13909-1 Coal and coke — Mechanical sampling — Part 1: image conversion — Part 1: Dynamic Range
General introduction Conversion
ISO/CD 13909-2 Coal and coke — Mechanical sampling — Part 2: TC 43 Acoustics
Coal — Sampling from moving streams
ISO/CD 23351-2 Acoustics — Measurement of speech level reduc-
ISO/CD 13909-3 Coal and coke — Mechanical sampling — Part 3: tion of furniture ensembles and enclosures — Part
Coal — Sampling from stationary lots 2: Field method
ISO/CD 13909-4 Coal and coke — Mechanical sampling — Part 4: TC 45 Rubber and rubber products
Coal — Preparation of test samples
ISO/CD 2230 Rubber products — Guidelines for storage
ISO/CD 13909-5 Coal and coke — Mechanical sampling — Part 5:
Coke — Sampling from moving streams ISO/CD 8067 Flexible cellular polymeric materials — Determina-
tion of tear strength
ISO/CD 13909-6 Coal and coke — Mechanical sampling — Part 6:
Coke — Preparation of test samples TC 47 Chemistry
ISO/CD 13909-7 Coal and coke — Mechanical sampling — Part 7: ISO/CD 16294 Chemical recycling of organic materials — Organic
Methods for determining the precision of sam- recoverable resources and chemical recycled
pling, sample preparation and testing resources

ISO/CD 13909-8 Coal and coke — Mechanical sampling — Part 8: TC 69 Applications of statistical methods
Methods of testing for bias ISO/CD 7870-5 Control charts — Part 5: Specialized control charts
TC 34 Food products TC 76 Transfusion, infusion and injection, and
ISO/CD 7304-1 Durum wheat semolina and alimentary pasta — blood processing equipment for medical and
Estimation of cooking quality of alimentary pasta pharmaceutical use
by sensory analysis — Part 1: Reference method
ISO/CD 15747 Plastic containers for intravenous injections

ISO Update, Supplement to ISO Focus -- April 2024 1

 TC 82 Mining ISO/CD 14533-3 Processes, data elements and documents in com-
merce, industry and administration — Long term
ISO/CD 18758 Mining and earth-moving machinery — Rock
signature — Part 3: Long term signature profiles
drill rigs and rock reinforcement rigs — Safety
for PDF Advanced Electronic Signatures (PAdES)
requirements
TC 159 Ergonomics
ISO/CD 22932-5 Mining — Vocabulary — Part 5: Drilling and
blasting ISO/CD 25063 Systems and software engineering — Systems and
software product Quality Requirements and Evalu-
TC 85 Nuclear energy, nuclear technologies, and ation (SQuaRE) — Common Industry Format (CIF)
radiological protection for usability: Context of use description
ISO/CD 18990 Measurement of radioactivity in urine-238Pu, ISO/CD TR Ergonomics of the thermal environment: Adaptive
239Pu and 240Pu-Test method using alpha spec- 23672 methods for achieving thermal comfort
trometry and ICP-MS
TC 164 Mechanical testing of metals
TC 86 Refrigeration and air-conditioning
ISO/CD 6892-2 Metallic materials — Tensile testing — Part 2:
ISO/CD 18976 ISO 917, Testing of refrigerant compressors Method of test at elevated temperature
TC 96 Cranes ISO/DTS 6892-5 Metallic materials — Tensile testing — Part 5: Spec-
ISO/CD 4301-4 Cranes — Classification — Part 4: Jib cranes ification for testing miniaturised test pieces

TC 104 Freight containers TC 167 Steel and aluminium structures

ISO/CD 1161 Series 1 freight containers — Corner and interme- ISO/CD 19998 Structural bolting coordination — Tasks and
diate fittings — Specifications responsibilities

TC 108 Mechanical vibration, shock and condition TC 171 Document management applications
monitoring ISO/CD 15801 Document management — Electronically stored
ISO 16063- Methods for the calibration of vibration and shock information — Requirements for trustworthiness
31:2009/CD transducers — Part 31: Testing of transverse vibra- and reliability
Amd 1 tion sensitivity — Amendment 1 TC 172 Optics and photonics
TC 110 Industrial trucks ISO/CD 11421.2 Optics and photonics — Accuracy of optical trans-
ISO/CD 13284 Industrial trucks — Fork arm extensions and tel- fer function (OTF) measurement
escopic fork arms — Technical characteristics and TC 184 Automation systems and integration
strength requirements
ISO/CD 23726-3 Automation systems and integration — Ontology
TC 121 Anaesthetic and respiratory equipment based interoperability — Part 3: Industrial data
ISO/CD 7376-2 Anaesthetic and respiratory equipment — Part 2: ontology
Video laryngoscopes TC 194 Biological and clinical evaluation of medical
ISO/CD 17510 Medical devices — Sleep apnoea breathing devices
therapy — Masks and application accessories ISO 10993- Biological evaluation of medical devices — Part
ISO/CD Medical electrical equipment — Part 2-56: Par- 12:2021/CD 12: Sample preparation and reference materials —
80601-2-56 ticular requirements for basic safety and essential Amd 1 Amendment 1
performance of clinical thermometers for body TC 199 Safety of machinery
temperature measurement
ISO/CD 12100 Safety of machinery — General principles for
ISO/CD Medical electrical equipment — Part 2-70: Particu- design — Risk assessment and risk reduction
80601-2-70 lar requirements for the basic safety and essential
performance of sleep apnoea breathing therapy TC 206 Fine ceramics
equipment ISO/CD 17168-1 Fine ceramics (advanced ceramics, advanced tech-
ISO/CD Medical electrical equipment — Part 2-74: Particu- nical ceramics) — Test method for air-purification
80601-2-74.2 lar requirements for basic safety and essential per- performance of semiconducting photocatalytic
formance of respiratory humidifying equipment materials under indoor lighting environment —
Part 1: Removal of nitric oxide
ISO/CD Medical electrical equipment — Part 2-90: Par-
80601-2-90.2 ticular requirements for basic safety and essential ISO/CD 17168-2 Fine ceramics (advanced ceramics, advanced tech-
performance of respiratory high-flow therapy nical ceramics) — Test method for air-purification
equipment performance of semiconducting photocatalytic
materials under indoor lighting environment —
TC 130 Graphic technology Part 2: Removal of acetaldehyde
ISO/CD 19303-1 Graphic technology — Print Manufacturing, ISO/CD 17168-3 Fine ceramics (advanced ceramics, advanced tech-
requirements and guidelines — Part 1: Packaging nical ceramics) — Test method for air-purification
printing supply chain performance of semiconducting photocatalytic
TC 138 Plastics pipes, fittings and valves for the materials under indoor lighting environment —
transport of fluids Part 3: Removal of toluene

ISO/CD 8149 Unplasticized polyamide (PA-U) pipes — Effect of ISO/CD 17168-4 Fine ceramics (advanced ceramics, advanced tech-
time and temperature on the expected strength) nical ceramics) — Test method for air-purification
performance of semiconducting photocatalytic
ISO/CD 11300-2 Piping systems for rehabilitation of underground materials under indoor lighting environment —
drainage, sewerage and water supply networks — Part 4: Removal of formaldehyde
Part 2: Thermoset composite materials
ISO/CD 17168-5 Fine ceramics (advanced ceramics, advanced tech-
TC 146 Air quality nical ceramics) — Test method for air-purification
ISO/CD 21438-3 Workplace atmospheres — Determination of performance of semiconducting photocatalytic
inorganic acids by ion chromatography — Part 3: materials under indoor lighting environment —
Hydrofluoric acid and particulate fluorides Part 5: Removal of methyl mercaptan

TC 154 Processes, data elements and documents in TC 207 Environmental management

commerce, industry and administration

2 ISO Update, Supplement to ISO Focus -- April 2024

 ISO/CD 14002-3 Environmental management systems — Guide- ISO/IEC/IEEE CD Systems and software engineering — Life cycle
lines for using ISO 14001 to address environmental 24748-4 management — Part 4: Systems engineering
aspects and conditions within an environmental planning
topic area — Part 3: Climate
ISO/IEC CD Information Technology – Test methods for on-
ISO/CD 14054 Natural Capital Accounting for Organizations 18584-1.3 card biometric comparison applications — Part 1:
— Specification General principles and specifications
ISO/CD TS Eco-Technoeconomic Analyses: Principles, require- ISO/IEC CD Information technology — Radio frequency identi-
14076 ments and guidelines 18000-6 fication for item management — Part 6: Param-
eters for air interface communications at 860 MHz
TC 216 Footwear to 960 MHz General
ISO/CD 20681 Footwear and footwear components — Test
ISO/IEC CD Information technology — Radio frequency identi-
method to assess antimicrobial activity — Agar
18047-6 fication device conformance test methods — Part
diffusion test
6: Test methods for air interface communications
TC 224 Drinking water, wastewater and stormwater at 860 MHz to 960 MHz
systems and services ISO/IEC CD Information technology — Conformance test
ISO/CD 24599 Guidelines for the management of mobile toilets 19823-10 methods for security service crypto suites — Part
under epidemic situations 10: Crypto suite AES-128

TC 265 Carbon dioxide capture, transportation, and ISO/IEC CD Information technology — Conformance test
geological storage 19823-11 methods for security service crypto suites — Part
11: Crypto suite PRESENT-80
ISO/CD 27914 Carbon dioxide capture, transportation and geo-
logical storage — Geological storage ISO/IEC CD Information technology — Conformance test
19823-13 methods for security service crypto suites — Part
TC 269 Railway applications 13: Cryptographic Suite Grain-128A
ISO/CD 18298 Railway applications — Platform barrier systems ISO/IEC CD Information technology — Conformance test
19823-16 methods for security service crypto suites — Part
TC 276 Biotechnology
16: Crypto suite ECDSA-ECDH security services for
ISO/CD 16921-1 Biotechnology — Gene delivery systems — Part 1: air interface communications
Vocabulary
ISO/IEC CD Information technology — Conformance test
ISO/CD 16921-2 Biotechnology — Gene delivery systems — Part 19823-21 methods for security service crypto suites — Part
2: Guide for methods for the qualification of viral 21: Crypto suite SIMON
vectors
ISO/IEC CD Information technology — Conformance test
ISO/CD 23511 Biotechnology — General requirements and con- 19823-22 methods for security service crypto suites — Part
siderations for cell line authentication 22: Crypto suite SPECK
TC 292 Security and resilience ISO/IEC CD Information technology — Radio frequency iden-
24791-5 tification (RFID) for item management — Software
ISO/CD 22372.2 Security and resilience — Community resilience —
system infrastructure — Part 5: Device interface
Guidelines for resilient infrastructure
ISO/IEC CD Information technology — Automatic identifica-
TC 296 Bamboo and rattan 29167-10 tion and data capture techniques — Part 10:
ISO/CD 16830 Specification of bamboo drinking straws Crypto suite AES-128 security services for air
interface communications
TC 300 Solid recovered materials, including solid
recovered fuels ISO/IEC CD Information technology — Automatic identifica-
29167-11 tion and data capture techniques — Part 11:
ISO/CD 21660-2 Solid recovered fuels — Determination of moisture Crypto suite PRESENT-80 security services for air
content using the oven dry method — Part 2: Part interface communications
2: Determination of total moisture by a simplified
method ISO/IEC CD TR Information technology — Use cases on ad-
9858 vanced learning analytics services using emerging
TC 304 Healthcare organization management technologies
ISO/CD 9829 Healthcare organization management — Pandem- ISO/IEC CD Information technology for learning, education
ic response — Contact tracing 19788-2 and training — Metadata for learning resources —
TC 308 Chain of custody Part 2: Dublin Core elements

ISO/CD 13659 Chain of Custody — Book and Claim — require-

ments and guidelines
ISO/CD 13662 Chain of Custody — Mass Balance — Require-
ments and guidelines
CASCO Committee on conformity assessment
ISO/IEC CD
17007
Conformity assessment — Guidance for drafting
normative documents suitable for use for conform- DIS circulated
ity assessment
JTC 1 Information technology
Period from 01 March to 01 April 2024
ISO/IEC CD Information technology — 3D Printing and Scan-
23955 ning — Technical requirements for product data These documents have obtained substantial support within the appropri-
protection of Additive Manufacturing Service ate ISO technical committee.
Platform (AMSP) They have been submitted to the ISO member bodies for voting by the
ISO/IEC CD Information technology — Open systems intercon- date shown.
9594-12.3 nection — Part 12: The Directory: Key manage- * Available in English only
ment and public-key infrastructure establishment
and maintenance

ISO Update, Supplement to ISO Focus -- April 2024 3

 ISO/DIS 15964 Detection and avoidance system
Vote for unmanned aircraft systems
terminates 2024-06-05

CIE International Commission on TC 21 Equipment for fire protection

Illumination and fire fighting
ISO/CIE DIS Photocarcinogenesis action spec- ISO/DIS 6182-2 Fire protection — Automatic
28077.2 trum (non-melanoma skin cancers) sprinkler systems — Part 2:
2024-05-22 Requirements and test methods 2024-06-03
for sprinkler system alarm valves,
(Revision of ISO/CIE 28077:2016) check valves, water motor alarms,
retard devices and accelerators
TC 1 Screw threads (Revision of ISO 6182-4:2019, ISO
ISO/DIS 965-2 ISO general purpose metric screw 6182-5:2012, ISO 6182-6:2020, ISO
threads — Tolerances — Part 2: 6182-2:2012, ISO 6182-3:2012, ISO
Limits of sizes for general purpose 2024-05-27 6182-8:2019)
external and internal threads —
Medium tolerance quality
TC 22 Road vehicles
(Revision of ISO 965-2:1998, ISO ISO/DIS Road vehicles — Vehicle to grid
965-2:1998/Amd 1:2021) 15118-21 communication interface — Part
21: Common 2nd generation 2024-06-17
ISO/DIS 965-4 ISO general purpose metric screw
network layer and application layer
threads — Tolerances — Part 4:
requirements conformance test
Limits of sizes for hot dip galva- 2024-06-11
plan
nized external threads to mate with
internal threads made to tolerance TC 23 Tractors and machinery for
position H or G after galvanizing agriculture and forestry
(Revision of ISO 965-4:2021)
ISO/DIS 23117-2 Agricultural and forestry machin-
TC 6 Paper, board and pulps ery — Unmanned aerial spraying
systems — Part 2: Test methods to 2024-05-29
ISO/DIS 5267-2 Pulps — Determination of drain-
assess the horizontal transverse
ability — Part 2: "Canadian Stand-
spray distribution
ard" freeness method 2024-06-13
TC 28 Petroleum and related prod-
(Revision of ISO 5267-2:2001) ucts, fuels and lubricants from
TC 8 Ships and marine technology natural or synthetic sources
ISO/DIS 7613 Ships and marine technology — ISO/DIS 19970 Refrigerated hydrocarbon and non-
Hopper dredger — Trailing suction petroleum based liquefied gaseous
tube position monitoring system 2024-06-17 fuels — Metering of gas as fuel on 2024-06-20
LNG carriers during cargo transfer
operations
ISO/DIS 17579 Ships and marine technology — (Revision of ISO 19970:2017)
Design and testing requirements of
pneumatic quick-closing valves 2024-05-31 TC 31 Tyres, rims and valves
ISO/DIS 18511-1 Tyre abrasion rate measurement
ISO/DIS 16199 Ships and marine technology — methods — Part 1: Outdoor test
Jacking system appliances on self- method by using vehicles on road 2024-06-18
elevating unit — Acceptance tests 2024-06-14
ISO/DIS 18511-2 Tyre abrasion rate measurement
ISO/DIS 15016.2 Ships and marine technology — methods — Part 2: Indoor test
Specifications for the assessment of method by using an abrasion tester 2024-05-31
speed and power performance by 2024-05-24 on external drum
analysis of speed trial data TC 34 Food products
(Revision of ISO 15016:2015)
ISO/DIS 6900 Dried red jujubes — Specification
TC 17 Steel and test methods
ISO/DIS 4937 Steel and iron — Determination of 2024-06-17
chromium content — Potentiomet-
ric or visual titration method 2024-05-27 ISO/DIS 20948 Vegetable fats and oils — Determi-
nation of aflatoxins B1, B2, G1, G2
(Revision of ISO 4937:1986) by immunoaffinity column clean- 2024-06-18
TC 20 Aircraft and space vehicles up and high-performance liquid
chromatography
ISO/DIS 7689.2 Aerospace series — Bolts, with
MJ threads, made of alloy steel, ISO/DIS Molecular biomarkers — Detection
strength class 1 100 MPa — Pro- 2024-05-03 5354-1.2 of DNA in cotton used for textile
curement specification production — Part 1: Extraction 2024-05-27
(Revision of ISO 7689:2008) of DNA from cotton seed and raw
materials derived therefrom
ISO/DIS 16126.2 Space systems — Survivability (Revision of IWA 32:2019)
of unmanned spacecraft against
space debris and meteoroid 2024-05-01 ISO/DIS Prerequisite programmes on food
impacts for the purpose of space 22002-100 safety — Part 100: PRP require-
debris mitigation ments common for food, feed, and 2024-06-24
(Revision of ISO 16126:2014) packaging supply chain
TC 35 Paints and varnishes

4 ISO Update, Supplement to ISO Focus -- April 2024

 ISO/DIS 7012-1 Paints and varnishes — Determina- TC 61 Plastics
tion of preservatives in water-
ISO/DIS 19252 Plastics — Determination of scratch
dilutable coating materials — Part 2024-06-06
properties
1: Determination of in-can free
2024-06-03
formaldehyde
ISO/DIS 7012-2 Paints and varnishes — Determina- (Revision of ISO 19252:2008)
tion of preservatives in water-
dilutable coating materials — Part 2024-06-06 ISO/DIS 15373 Plastics — Polymer disper-
2: Determination of in-can total sions — Determination of free
formaldehyde formaldehyde 2024-06-13

ISO/DIS 7012-3 Paints and varnishes — Determina- (Revision of ISO 15373:2001)

tion of preservatives in water-di-
lutable coating materials — Part 3: 2024-06-06 ISO/DIS 16365-1 Plastics — Thermoplastic polyure-
Determination of in-can isothia- thanes for moulding and extrusion
zolinones with LC-UV and LC-MS — Part 1: Designation system and 2024-06-11
basis for specifications
TC 38 Textiles (Revision of ISO 16365-1:2014)
ISO/DIS 13629-1 Textiles — Determination of anti- ISO/DIS 29862 Self adhesive tapes — Determina-
fungal activity of textile products tion of peel adhesion properties
— Part 1: Luminescence method 2024-06-03 2024-06-10

(Revision of ISO 13629-1:2012) (Revision of ISO 29862:2018)

ISO/DIS 22195-7 Textiles — Determination of index ISO/DIS 19350 Recycled carbon fibre — Determi-
ingredient from coloured textile — nation of tensile strength distribu-
Part 7: Himalayan rhubarb 2024-06-07 tion and interfacial shear strength 2024-05-27
of single filament embedded in
ISO/DIS 22195-8 Textiles — Determination of index matrix polymer
ingredient from coloured textile — TC 67 Oil and gas industries including
Part 8: Hibiscus 2024-06-07 lower carbon energy
ISO/DIS 12747 Oil and gas industries including
ISO/DIS 13118 Textile — Biaxial tensile properties lower carbon energy — Pipeline
of woven fabric — Determination transportation systems — Recom- 2024-06-07
of elasticity properties using a 2024-06-19 mended practice for pipeline life
cruciform test piece extension
TC 44 Welding and allied processes (Revision of ISO/TS 12747:2011)
ISO/DIS 5175-3 Gas welding equipment — Safety TC 68 Financial services
devices — Part 3: Decomposition ISO/DIS 18774 Financial Services — Financial
blockers for low pressure acetylene 2024-05-29 Instrument Short Name (FISN)
2024-05-31
TC 46 Information and
documentation (Revision of ISO 18774:2015)

ISO/DIS 11108 Information and documentation — TC 83 Sports and other recreational

Archival paper — Requirements for facilities and equipment
permanence and durability 2024-06-18
ISO/DIS 6289 Skis — Vocabulary
(Revision of ISO 11108:1996) 2024-06-11
TC 54 Essential oils
(Revision of ISO 6289:2003, ISO
ISO/DIS 3518 Essential oil of sandalwood
6289:2003/Cor 1:2005)
(<i>Santalum album</i> L.)
2024-06-06 ISO/DIS 23223 Alpine ski boots with improved
walking soles — Interface with
(Revision of ISO 3518:2022) alpine ski-bindings – Requirements 2024-06-11
and test methods
TC 59 Buildings and civil engineering (Revision of ISO 23223:2021)
works
TC 92 Fire safety
ISO/DIS 16757-4 Data structures for electronic prod-
uct catalogues for building services ISO/DIS 9239-1 Reaction to fire tests for floorings
— Part 4: Dictionary structures for 2024-06-12 — Part 1: Determination of the
product catalogue burning behaviour using a radiant 2024-06-19
heat source
ISO/DIS 16757-5 Data structures for electronic (Revision of ISO 9239-1:2010)
product catalogues for building
services — Part 5: Product cata- 2024-06-13 ISO/DIS 834-1 Fire-resistance tests — Elements
logue exchange format of building construction — Part 1:
General requirements 2024-05-27
ISO/DIS 6082 Construction project govern-
ance — Guidance on delivery (Revision of ISO 834-1:1999, ISO
management 2024-06-12 834-1:1999/Amd 2:2021, ISO
834-1:1999/Amd 1:2012, ISO/TR
TC 60 Gears 834-3:2012)
ISO/DIS 21771-2 Cylindrical involute gears and gear ISO/DIS 834-7 Fire-resistance tests — Elements
pairs — Part 2: Calculation and of building construction — Part 7:
measurement of tooth thickness 2024-05-28 Specific requirements for columns 2024-05-29
and backlash

ISO Update, Supplement to ISO Focus -- April 2024 5

 (Revision of ISO 834-7:2000)
TC 132 Ferroalloys
TC 106 Dentistry ISO/DIS 6331 Chromium ores and concentrates
ISO/DIS 7405 Dentistry — Evaluation of biocom- — Determination of chromium
patibility of medical devices used content — Titrimetric method 2024-06-17
in dentistry 2024-06-10
(Revision of ISO 6331:1983)
(Revision of ISO 7405:2018)
ISO/DIS 7692 Ferrotitanium — Determination
ISO/DIS 6877 Dentistry — Endodontic obturating of titanium content — Titrimetric
materials method 2024-06-17
2024-06-13
(Revision of ISO 7692:1983)
(Revision of ISO 6877:2021)
TC 138 Plastics pipes, fittings and
ISO/DIS 16408 Dentistry — Oral care products — valves for the transport of fluids
Oral rinses
2024-06-24 ISO/DIS 21036 Plastics piping systems for indus-
trial applications — Unplasticized
(Revision of ISO 16408:2015) Polyamide (PA-U) — Metric series 2024-05-30
for specifications for components
TC 107 Metallic and other inorganic and system
coatings TC 156 Corrosion of metals and alloys
ISO/DIS 21452 Specification and requirements of
ISO 8407:2021/ Corrosion of metals and alloys —
thermal spray coatings for power
DAmd 1 Removal of corrosion products
plant boiler tubes 2024-06-05
from corrosion test specimens — 2024-05-27
Amendment 1
ISO/DIS 21456 Determination of the residual stress
of TGO layer in thermal barrier
TC 161 Controls and protective devices
coating by photoexcitation fluores- 2024-06-05 for gaseous and liquid fuels
cence piezoelectric spectroscopy ISO/DIS Safety and control devices for gas
ISO/DIS 21465 Test method for CMAS corrosion 23551-10 burners and gas-burning appli-
of thermal/environmental barrier ances — Particular requirements 2024-06-18
coatings under dynamic thermal 2024-05-31 — Part 10: Vent valves
cycling (Revision of ISO 23551-10:2016)

TC 117 Fans TC 173 Assistive products

ISO 5801:2017/ Fans — Performance testing using ISO 11199- Assistive products for walking
DAmd 1 standardized airways — Amend- 2:2021/DAmd 1 manipulated by both arms —
ment 1 2024-06-24 Requirements and test methods — 2024-06-07
Part 2: Rollators — Amendment 1:
Eliminate brake requirements in 6.5
ISO/DIS 13348 Fans — Tolerances, methods of Structure requirements
conversion and technical data
presentation 2024-06-10 IEC/DIS Medical electrical equipment —
80601-2-52 Part 2-52: Particular requirements
(Revision of ISO 13348:2007) for the basic safety and essential 2024-05-24
performance of medical beds
TC 120 Leather (Revision of IEC 60601-2-52:2009/
ISO/DIS 18270 Classification and performance Cor 1:2010, IEC 60601-2-52:2009,
guidelines for leather upholstered IEC 60601-2-52:2009/Amd 1:2015)
products 2024-06-10 IEC/DIS Medical electrical equipment —
80601-2-89 Part 2-89: Particular requirements
TC 121 Anaesthetic and respiratory for the basic safety and essential 2024-05-24
performance of medical beds for
equipment
children
ISO/DIS 11197 Medical supply units
ISO/DIS 7176-21 Wheelchairs — Part 21: Require-
ments and test methods for
2024-06-18
electromagnetic compatibility of 2024-06-12
electrically powered wheelchairs
(Revision of ISO 11197:2019)
and scooters, and battery chargers
ISO/DIS 18777-1 Transportable liquid oxygen (Revision of ISO 7176-21:2009)
systems for medical use — Part 1:
Common requirements and par- 2024-05-28 TC 174 Jewellery and precious metals
ticular requirements for base units ISO/DIS 10713 Jewellery and precious metals —
(Revision of ISO 18777:2005) Gold alloy coatings
2024-06-10
ISO/DIS 18777-2 Transportable liquid oxygen
systems for medical use — Part 2:
Portable units 2024-05-28 (Revision of ISO 10713:1992)
TC 181 Safety of toys
(Revision of ISO 18777:2005)
ISO/DIS 8124-4 Safety of toys — Part 4: Activity
TC 123 Plain bearings toys for domestic use
2024-06-17
ISO/DIS 4385 Plain bearings — Compression test-
ing of bearing materials
2024-06-07 (Revision of ISO 8124-4:2014/Amd
1:2017, ISO 8124-4:2014/Amd
2:2019, ISO 8124-4:2014)
(Revision of ISO 4385:1981)
TC 190 Soil quality

6 ISO Update, Supplement to ISO Focus -- April 2024

 ISO/DIS 18386 Soil quality — Screening method ISO/DIS 21506 Project, programme and portfolio
for soil temperature — Measure- management — Vocabulary
ment by IR thermometer 2024-06-14 2024-05-27

(Revision of ISO/TR 21506:2018)

TC 194 Biological and clinical evalua-
tion of medical devices TC 261 Additive manufacturing
ISO 10993- Biological evaluation of medical ISO/ASTM DIS Additive manufacturing of ceramics
4:2017/DAmd 1 devices — Part 4: Selection of 52940 — Feedstock materials — Charac-
tests for interactions with blood — 2024-05-30 terization of ceramic slurry in vat 2024-06-03
Amendment 1 photopolymerization
TC 201 Surface chemical analysis TC 269 Railway applications
ISO/DIS 20579-2 Surface chemical analysis — ISO/DIS 10516 Railway application — Vehicle
Sample handling, preparation and reference masses
mounting — Part 2: Documenting 2024-06-13 2024-06-03
and reporting the preparation and
mounting of specimens for analysis
TC 292 Security and resilience
TC 204 Intelligent transport systems ISO/DIS 22344 Security and resilience — Protec-
ISO/DIS 17573-3 Electronic fee collection — System tive security — Guidelines for crime
architecture for vehicle-related toll- prevention through environmental 2024-06-21
ing — Part 3: Data dictionary 2024-05-31 design for residential facilities
TC 297 Waste collection and transpor-
(Revision of ISO 17573-3:2023)
tation management
TC 206 Fine ceramics ISO/DIS 13155 Refuse Collection Vehicles —
ISO/DIS 19618 Fine ceramics (advanced ceram- Terminology of Main Functional
ics, advanced technical ceram- Components &amp; Performance 2024-06-19
ics) — Measurement method for 2024-06-17 Indicators
normal spectral emissivity using
blackbody reference with an FTIR
IULTCS International Union of Leather
spectrometer Technologists and Chemists
(Revision of ISO 19618:2017) Societies
ISO/DIS 19628 Fine ceramics (advanced ceram- ISO/DIS 23649 Chemicals for the leather tanning
ics, advanced technical ceramics) industry - Determination of cyclosi-
— Thermophysical properties of 2024-06-20 loxanes in waterproofing fatliquors 2024-06-04
ceramic composites — Determina-
tion of specific heat capacity JTC 1 Information technology
(Revision of ISO 19628:2017)
ISO/IEC/IEEE DIS Software engineering — Software
ISO/DIS 20351 Fine ceramics (advanced ceramics, 32430 non-functional size measurement
advanced technical ceramics) — 2024-05-28
Test method for optical properties 2024-06-17
of ceramic phosphors for white (Revision of ISO/IEC/IEEE
light-emitting diodes using an 32430:2021)
integrating sphere
(Revision of ISO 20351:2017) ISO/IEC 11770- Information security — Key man-
3:2021/DAmd 1 agement — Part 3: Mechanisms
TC 214 Elevating work platforms using asymmetric techniques — 2024-05-28
ISO/DIS 18878 Mobile elevating work platforms — Amendment 1: TFNS identity-based
Operator (driver) training key agreement
2024-06-21 ISO/IEC DIS Information technology — Coding
14496-12.2 of audio-visual objects — Part 12:
(Revision of ISO 18878:2013) ISO base media file format 2024-05-24
TC 220 Cryogenic vessels
(Revision of ISO/IEC 14496-12:2022)
ISO/DIS 21028-1 Cryogenic vessels — Toughness
requirements for materials at ISO/IEC DIS Information technology — Au-
cryogenic temperature — Part 1: 2024-06-17 21471 tomatic identification and data
Temperatures below -80 degrees °C capture techniques — Extended 2024-06-24
rectangular data matrix (DMRE) bar
(Revision of ISO 21028-1:2016)
code symbology specification
TC 228 Tourism and related services (Revision of ISO/IEC 21471:2020)
ISO/DIS 18060 Sustainable Tourism — Indicators ISO/IEC 15944- Information technology — Busi-
for organizations in the tourism 7:2009/DAmd 1 ness operational view — Part 7:
value chain — Requirements and 2024-05-27 eBusiness vocabulary — Amend- 2024-06-10
guidance for use ment 1: Addition of clause 3
entries in ISO/IEC 15944-8, ISO/IEC
TC 234 Fisheries and aquaculture
15944-9, ISO/IEC 15944-12, ISO/IEC
ISO/DIS 20423 Carbon footprint for seafood — 15944-16, ISO/IEC 15944-17, ISO/
Product category rules (CFP-PCR) IEC 15944-20 and ISO/IEC 15944-21
for macroalgae 2024-06-21 to Annexes A, B and C and related
changes
TC 258 Project, programme and port-
folio management

ISO Update, Supplement to ISO Focus -- April 2024 7

 ISO/FDIS Road vehicles — Vehicle test meth-
11451-3 ods for electrical disturbances from
narrowband radiated electromag- 2024-05-01
netic energy — Part 3: On-board
transmitter simulation
(Revision of ISO 11451-3:2015)
FDIS circulated ISO/FDIS Road vehicles — Component test
11452-3 methods for electrical disturbances
from narrowband radiated electro- 2024-05-01
magnetic energy — Part 3: Trans-
Period from 01 March to 01 April 2024
verse electromagnetic (TEM) cell
These Final draft International Standards have been submitted to the ISO (Revision of ISO 11452-3:2016)
member bodies for formal approval by the date shown
ISO/FDIS 11565 Road vehicles — Spark-plugs —
* Available in English only Test methods and requirements
2024-05-09

(Revision of ISO 11565:2006, ISO

Vote 11565:2006/Cor 1:2007)
terminates
ISO/FDIS 6626-1 Internal combustion engines —
Piston rings — Part 1: Coil spring
CIE International Commission on loaded oil control rings made of 2024-05-22
Illumination cast iron
ISO/CIE FDIS Colorimetry — Part 5: CIE 1976 (Revision of ISO 6626:1989)
11664-5 L*u*v* colour space and u', v' uni- ISO/PRF Road vehicles — Dimethyl Ether
form chromaticity scale diagram 2024-04-26 22760-3 (DME) fuel system components —
Part 3: 85% stop valve
(Revision of ISO/CIE 11664-5:2016)
ISO/PRF Road vehicles — Dimethyl Ether
TC 2 Fasteners 22760-4 (DME) fuel system components —
Part 4: Level indicator
ISO/FDIS 4766 Fasteners — Slotted set screws
with flat point ISO/PRF Road vehicles — Dimethyl Ether
2024-05-16 22760-6 (DME) fuel system components —
Part 6: Pressure relief valve (PRV)
(Revision of ISO 4766:2011)
ISO/PRF Road vehicles — Dimethyl Ether
ISO/FDIS 7434 Fasteners — Slotted set screws 22760-9 (DME) fuel system components —
with cone point Part 9: Pressure relief device (PRD)
2024-05-16
ISO/FDIS 24605 Road vehicles — Dimethyl Ether
(DME) refuelling connector with
(Revision of ISO 7434:1983) pressure equalizing port 2024-05-09
ISO/FDIS 7435 Fasteners — Slotted set screws
with dog point ISO/FDIS 24671 Road vehicles — Qualification and
2024-05-16 certification of technical personnel
dealing with natural gas vehicles 2024-05-08
(Revision of ISO 7435:1983) (NGVs)
ISO/FDIS 7436 Fasteners — Slotted set screws
TC 27 Coal and coke
with cup point
2024-05-16 ISO/FDIS 1171 Coal and coke — Determination
of ash
(Revision of ISO 7436:1983) 2024-05-23

TC 6 Paper, board and pulps (Revision of ISO 1171:2010)

ISO/FDIS 7763 Testing of paper and board — ISO/PRF 17246 Coal and coke — Proximate
Compressive strength of a sample analysis
held in s-shape 2024-05-21
(Revision of ISO 17246:2010)
ISO/FDIS Tissue paper and tissue products —
TC 28 Petroleum and related prod-
12625-5 Part 5: Determination of wet tensile
strength 2024-05-01 ucts, fuels and lubricants from
natural or synthetic sources
(Revision of ISO 12625-5:2016) ISO/PRF 9200 Petroleum measurement systems
TC 17 Steel — Metering of viscous and high
temperature liquids
ISO/FDIS 11772 Hot-rolled longitudinally profiled (Revision of ISO 9200:1993)
steel plate
2024-05-06 ISO/FDIS 6919 Measurement of refrigerated
hydrocarbon and non-petroleum
based liquefied gaseous fuels — 2024-05-07
TC 20 Aircraft and space vehicles Dynamic measurement of liquefied
ISO/DTR 23689 Space environment (natural and natural gas (LNG) as marine fuel —
artificial) — Space weather infor- Truck-to-ship (TTS) bunkering
mation for use in space systems 2024-05-22 TC 34 Food products
operations
TC 22 Road vehicles

8 ISO Update, Supplement to ISO Focus -- April 2024

 ISO/FDIS Animal feeding stuffs — Enzy- ISO/PRF Health and safety in welding and
15914-2 matic determination of total starch 10882-2 allied processes — Sampling of
content — Part 2: Method by 2024-04-30 airborne particles and gases in the
enzymatic determination with a operator's breathing zone — Part 2:
hexokinase system and potassium Sampling of gases
hydroxide dispersion (Revision of ISO 10882-2:2000)
ISO/FDIS Animal and vegetable fats and ISO/PRF Solder wire, solid and flux-cored
18363-3 oils — Determination of fatty- 12224-1 — Specification and test meth-
acid-bound chloropropanediols 2024-06-04 ods — Part 1: Classification and
(MCPDs) and glycidol by GC/MS performance requirements
— Part 3: Method using acid trans- (Revision of ISO 12224-1:1997)
esterification and measurement for
ISO/PRF Solder wire, solid and flux-cored
2-MCPD, 3-MCPD and glycidol
12224-2 — Specification and test methods
(Revision of ISO 18363-3:2017)
— Part 2: Determination of flux
ISO/FDIS 29842 Sensory analysis — Methodol- content
ogy — Balanced incomplete block (Revision of ISO 12224-2:1997)
designs 2024-05-15
TC 45 Rubber and rubber products
(Revision of ISO 29842:2011, ISO ISO/PRF 6472 Rubber compounding ingredients
29842:2011/Amd 1:2015) — Abbreviated terms
TC 37 Language and terminology
(Revision of ISO 6472:2017)
ISO/FDIS Language coding — A framework
ISO/FDIS 4080 Rubber and plastics hoses and tub-
21636-1 for language varieties — Part 1:
ing, and their assemblies — Deter-
Vocabulary 2024-05-06
mination of permeability to gas 2024-05-13

ISO/FDIS Language coding — A framework (Revision of ISO 4080:2009)

21636-3 for language varieties — Part 3:
ISO/FDIS 6134 Rubber hoses and hose assemblies
Application of the framework 2024-05-06
for saturated steam — Specification
2024-05-06
ISO/PRF Language resource management
24613-6 — Lexical markup framework (LMF) (Revision of ISO 6134:2017)
— Part 6: Syntax and semantics
ISO/FDIS 37 Rubber, vulcanized or thermo-
ISO/FDIS Language resource management plastic — Determination of tensile
24620-5 — Controlled human commu- stress-strain properties 2024-04-29
nication (CHC) — Part 5: Lexico- 2024-05-02
morpho-syntactic principles and (Revision of ISO 37:2017)
methodology for personal data
recognition and protection in text ISO/FDIS 1431-1 Rubber, vulcanized or thermoplas-
tic — Resistance to ozone cracking
TC 39 Machine tools — Part 1: Static and dynamic strain 2024-05-20
ISO/FDIS Woodworking machines — Safety testing
19085-7 — Part 7: Surface planing, thickness (Revision of ISO 1431-1:2022)
planing and combined surface/ 2024-06-14 ISO 5600 Rubber — Determination of adhe-
thickness planing machines sion to rigid materials using conical
(Revision of ISO 19085-7:2019) shaped parts
ISO/FDIS Woodworking machines — Safety (Revision of ISO 5600:2017)
19085-9 — Part 9: Circular saw benches ISO/FDIS 7270-2 Rubber — Analysis by pyrolytic
(with and without sliding table) 2024-06-19 gas-chromatographic methods —
Part 2: Determination of styrene/ 2024-05-01
(Revision of ISO 19085-9:2019) butadiene/isoprene ratio
TC 42 Photography (Revision of ISO 7270-2:2012)

ISO/PRF 20793 Photography — Lenticular print for ISO/FDIS 19983 Rubber — Determination of preci-
changing images — Measurements sion of test methods
of image quality 2024-05-27
(Revision of ISO/TS 20793:2019)
(Revision of ISO 19983:2022)
TC 43 Acoustics
ISO/PRF 6916-2 Flexible cellular polymeric ma-
ISO/FDIS 5114-1 Acoustics — Determination of un- terials — Sponge and expanded
certainties associated with sound cellular rubber products — Part 2:
emission measures — Part 1: Sound 2024-05-13 Specification for mouldings and
power levels determined from extrusions
sound pressure measurements (Revision of ISO 6916-2:2001)
ISO/FDIS Acoustics — Test methods for the TC 46 Information and
26101-2 qualification of the acoustic envi- documentation
ronment — Part 2: Determination 2024-05-01
of the environmental correction ISO/PRF 24138 Information and documentation
— International Standard Content
TC 44 Welding and allied processes Code (ISCC)
ISO/PRF Health and safety in welding and TC 58 Gas cylinders
10882-1 allied processes — Sampling of
airborne particles and gases in the
operator's breathing zone — Part 1:
Sampling of airborne particles
(Revision of ISO 10882-1:2011)

ISO Update, Supplement to ISO Focus -- April 2024 9

 ISO 18119:2018/ Gas cylinders — Seamless steel ISO/FDIS Protective equipment for use in ice
FDAmd 2 and seamless aluminium-alloy gas 10256-2 hockey — Part 2: Head protectors
cylinders and tubes — Periodic 2024-05-14 for skaters 2024-06-13
inspection and testing — Amend-
ment 2 (Revision of ISO 10256-2:2016)
TC 59 Buildings and civil engineering ISO/FDIS Protective equipment for use in
works 10256-3 ice hockey — Part 3: Face and eye
protectors for skaters 2024-06-13
ISO/FDIS 7817-1 Building information modelling —
Level of information need — Part 1:
(Revision of ISO 10256-3:2016)
Concepts and principles 2024-05-17
ISO/FDIS Protective equipment for use in ice
10256-4 hockey — Part 4: Head and face
TC 67 Oil and gas industries including protectors for goalkeepers 2024-06-13
lower carbon energy
ISO 13623:2017/ Petroleum and natural gas indus- (Revision of ISO 10256-4:2016)
FDAmd 1 tries — Pipeline transportation TC 85 Nuclear energy, nuclear
systems — Amendment 1: Com- 2024-05-01
technologies, and radiological
plementary requirements for the
transportation of fluids containing protection
carbon dioxide or hydrogen ISO/FDIS 17099 Radiological protection — Per-
ISO/FDIS 6398-1 Oil and gas industries including formance criteria for laboratories
lower carbon energy — Submers- using the cytokinesis block micro- 2024-05-23
ible linear motor systems for 2024-05-06 nucleus (CBMN) assay in peripheral
artificial lift — Part 1: Submersible blood lymphocytes for biological
linear motor dosimetry
(Revision of ISO 17099:2014)
ISO/FDIS 15544 Oil and gas industries — Offshore
production installations — Re- ISO/PRF 12183 Nuclear fuel technology —
quirements and guidelines for 2024-05-02 Controlled-potential coulometric
emergency response measurement of plutonium
(Revision of ISO 15544:2000, ISO (Revision of ISO 12183:2016)
15544:2000/Amd 1:2009) ISO/PRF 16795 Nuclear energy — Determination
of Gd₂O<sub>3</
TC 68 Financial services
sub> content in pellets containing
ISO 5201 Financial services — Code-scan- uranium oxide by X-ray fluores-
ning payment security cence spectrometry
(Revision of ISO 16795:2004)
TC 70 Internal combustion engines TC 92 Fire safety
ISO/FDIS Methods of test for full-flow ISO/FDIS 6944-1 Fire containment — Elements of
4548-15 lubricating oil filters for internal building construction — Part 1:
combustion engines — Part 15: 2024-05-22 Ventilation ducts 2024-05-23
Vibration fatigue test for composite
filter housings (Revision of ISO 6944-1:2008, ISO
(Revision of ISO 4548-15:2014) 6944-1:2008/Amd 1:2015)
TC 71 Concrete, reinforced concrete ISO/DTS 23782 Requirements for large-scale test
and pre-stressed concrete methods to represent fire threats to
people in different fire scenarios 2024-05-15
ISO/FDIS Maintenance and repair of concrete
16311-1 structures — Part 1: General
principles 2024-04-29 TC 94 Personal safety -- Personal
protective equipment
(Revision of ISO 16311-1:2014)
ISO/FDIS 374-1 Protective gloves against danger-
TC 76 Transfusion, infusion and ous chemicals and micro-organ-
injection, and blood process- isms — Part 1: Terminology and 2024-06-13
ing equipment for medical and performance requirements for
pharmaceutical use chemical risks
(Revision of ISO 374-1:2016, ISO
ISO/FDIS Prefilled syringes — Part 4: Glass 374-1:2016/Amd 1:2018)
11040-4 barrels for injectables and sterilized
subassembled syringes ready for 2024-05-09 ISO/FDIS 374-5 Protective gloves against danger-
filling ous chemicals and micro-organ-
(Revision of ISO 11040-4:2015) isms — Part 5: Terminology and 2024-06-13
performance requirements for
ISO/FDIS Prefilled syringes — Part 7: Packag- micro-organisms risks
11040-7 ing systems for sterilized subassem- (Revision of ISO 374-5:2016)
bled syringes ready for filling 2024-05-09
ISO/FDIS Protective clothing against heat
(Revision of ISO 11040-7:2015) 13506-1 and flame — Part 1: Test method
for complete garments — Measure- 2024-05-21
TC 83 Sports and other recreational ment of transferred energy using
facilities and equipment an instrumented manikin
(Revision of ISO 13506-1:2017)
ISO/FDIS Protective equipment for use
10256-1 in ice hockey — Part 1: General ISO/FDIS Protective clothing against heat
requirements 2024-06-13 13506-2 and flame — Part 2: Skin burn
injury prediction — Calculation 2024-05-20
(Revision of ISO 10256-1:2016) requirements and test cases
(Revision of ISO 13506-2:2017)

10 ISO Update, Supplement to ISO Focus -- April 2024

 ISO/FDIS Protective clothing — Test ISO/PRF Non-destructive testing — Charac-
17491-4 methods for clothing providing 32543-1 teristics of focal spots in industrial
protection against chemicals — 2024-05-03 X-ray systems — Part 1: Pinhole
Part 4: Determination of resistance camera radiographic method
to penetration by a spray of liquid
ISO/FDIS 32679 Non-destructive testing — Radio-
(spray test)
graphic testing — Determination of
(Revision of ISO 17491-4:2008, ISO the size of industrial radiographic 2024-05-14
17491-4:2008/Amd 1:2016) gamma sources
TC 104 Freight containers ISO/FDIS 18081 Non-destructive testing — Acous-
ISO 1496- Series 1 freight containers — Speci- tic emission testing (AT) — Leak
1:2013/FDAmd fication and testing — Part 1: Gen- detection by means of acoustic 2024-05-27
2 eral cargo containers for general 2024-05-16 emission
purposes — Amendment 2 (Revision of ISO 18081:2016)
TC 110 Industrial trucks TC 136 Furniture
ISO/FDIS Industrial trucks — Verification of ISO/FDIS Furniture — Assessment of the ig-
22915-1 stability — Part 1: General 16502-1 nitability of mattresses and uphol-
2024-05-14 stered bed bases — Part 1: Ignition 2024-04-29
source: smouldering cigarette
(Revision of ISO 22915-1:2016) ISO/FDIS Furniture — Assessment of the ig-
ISO/FDIS Industrial trucks — Verification 16502-2 nitability of mattresses and uphol-
22915-16 of stability — Part 16: Pedestrian- stered bed bases — Part 2: Ignition 2024-04-29
propelled trucks 2024-05-14 source: match flame equivalent
TC 142 Cleaning equipment for air and
(Revision of ISO 22915-16:2014)
other gases
TC 113 Hydrometry ISO/FDIS 23742 Test method for the evaluation
ISO/PRF 6640 Measurement of density of water- of permeability and filtration ef-
sediment mixture using radiation ficiency distribution of bag filter 2024-05-14
transmission method medium
TC 126 Tobacco and tobacco products ISO/FDIS 29464 Cleaning of air and other gases
— Vocabulary
ISO/FDIS 5501-1 Tobacco heating systems — Defini-
2024-05-14
tions and standard conditions for
aerosol generation and collec- 2024-05-01
(Revision of ISO 29464:2017)
tion — Part 1: Electrically heated
tobacco products (eHTPs) TC 145 Graphical symbols
ISO/FDIS 5501-2 Tobacco heating systems — Defini- ISO 7001:2023/ Graphical symbols — Registered
tions and standard conditions for PRF Amd 101 public information symbols —
aerosol generation and collection 2024-05-01 Amendment 101: PI AC 023 Univer-
— Part 2: Aerosol heated tobacco sal changing place
products (aHTPs)
ISO/PRF 3864-3 Graphical symbols — Safety
ISO/FDIS 5501-3 Tobacco heating systems — Defini- colours and safety signs — Part
tions and standard conditions for 3: Design principles for graphical
aerosol generation and collection 2024-05-01 symbols for use in safety signs
— Part 3: Carbon heated tobacco (Revision of ISO 3864-3:2012)
products (cHTPs)
ISO 7010:2019/ Graphical symbols — Safety col-
ISO/FDIS 6080 Tobacco heating systems PRF Amd 8 ours and safety signs — Registered
— Vocabulary safety signs — Amendment 8
2024-05-01
ISO/PRF Water safety signs and beach safety
20712-3 flags — Part 3: Guidance for use
ISO 8454 Cigarettes — Determination of
carbon monoxide in the vapour (Revision of ISO 20712-3:2020)
phase of cigarette smoke — NDIR
method TC 146 Air quality
(Revision of ISO 8454:2007, ISO ISO/FDIS Indoor air — Part 33: Determina-
8454:2007/Amd 1:2009, ISO 16000-33 tion of phthalates with gas chro-
8454:2007/Amd 2:2019) matography/mass spectrometry 2024-05-03
ISO/FDIS 4906 Tobacco and tobacco products (GC/MS)
— Determination of filling power (Revision of ISO 16000-33:2017)
for preparation of fine-cut smok- 2024-05-01 TC 156 Corrosion of metals and alloys
ing articles — Constant-weight
pressurization ISO 7539- Corrosion of metals and alloys —
6:2018/PRF Stress corrosion testing — Part 6:
TC 131 Fluid power systems Amd 1 Preparation and use of precracked
ISO/FDIS 11619 Pneumatic fluid power — Polyu- specimens for tests under constant
rethane and polyamide tubings load or constant displacement —
for use primarily in pneumatic 2024-05-27 Amendment 1
installations — Dimensions and ISO 11782- Corrosion of metals and alloys —
specification 2:1998/PRF Corrosion fatigue testing — Part
(Revision of ISO/TS 11619:2014) Amd 1 2: Crack propagation testing using
precracked specimens — Amend-
TC 135 Non-destructive testing
ment 1
TC 159 Ergonomics

ISO Update, Supplement to ISO Focus -- April 2024 11

 ISO/PRF 17097 3-D human body scan data — ISO/FDIS 14594 Microbeam analysis — Electron
Methods for the processing of probe microanalysis — Guidelines
human body scan data for the determination of experi- 2024-04-30
mental parameters for wavelength
TC 161 Controls and protective devices dispersive spectroscopy
for gaseous and liquid fuels (Revision of ISO 14594:2014)
ISO/FDIS Gas pressure safety and control
TC 204 Intelligent transport systems
23555-3 devices for use in gas transmission,
distribution and installations for 2024-05-15 ISO/DTR Intelligent transport systems —
inlet pressures up to and including 21734-3 Performance testing for con-
10 MPa — Part 3: Safety shut-off nectivity and safety functions of 2024-05-27
devices automated driving buses in public
transport — Part 3: Service frame-
TC 172 Optics and photonics work and use cases
ISO/PRF 6760-2 Optics and photonics — Test ISO/DTS Intelligent transport systems —
method for temperature coefficient 22741-2 Roadside modules AP-DATEX data
of refractive index of optical glasses interface — Part 2: Generalised 2024-05-21
— Part 2: Interferometric method field device basic management
ISO/PRF Microscopes — Designation of
TC 206 Fine ceramics
19012-4 microscope objectives — Part 4:
Polarization characteristics ISO/FDIS 22459 Fine ceramics (advanced ceram-
ics, advanced technical ceram-
TC 174 Jewellery and precious metals ics) — Reinforcement of ceramic 2024-05-29
ISO/FDIS 18214 Jewellery and precious metals composites — Determination of
— Determination of high purity distribution of tensile strength and
gold, silver, platinum and palla- 2024-04-30 tensile strain to failure of filaments
dium — Difference method using within a multifilament tow at ambi-
SPARK-OES ent temperature
(Revision of ISO 22459:2020)
TC 176 Quality management and qual-
ity assurance TC 210 Quality management and cor-
responding general aspects for
ISO/FDIS 10009 Quality management — Guid-
ance for quality tools and their products with a health purpose
application 2024-04-26 including medical devices
ISO/FDIS Small-bore connectors for liquids
TC 184 Automation systems and 80369-2 and gases in healthcare applica-
tions — Part 2: Connectors for 2024-05-31
integration
respiratory applications
ISO/FDIS Data quality — Part 115: Master
8000-115 data: Exchange of quality identi-
TC 211 Geographic information/
fiers: Syntactic, semantic and 2024-05-17 Geomatics
resolution requirements ISO/FDIS 19164 Geographic information — Indoor
(Revision of ISO 8000-115:2018) feature model
TC 188 Small craft 2024-05-15

ISO/FDIS 15085 Small craft — Protection from

falling overboard and means of TC 212 Medical laboratories and in
reboarding 2024-05-10 vitro diagnostic systems
ISO/DTS 22583 Requirements and recommenda-
(Revision of ISO 15085:2003, ISO tions for supervisors and operators
15085:2003/Amd 2:2017) of point-of-care testing (POCT) 2024-04-26
TC 198 Sterilization of health care equipment
products (Revision of ISO/TS 22583:2019)

ISO/FDIS Washer-disinfectors — Part 1: TC 215 Health informatics

15883-1 General requirements, terms and ISO/DTS 5777 Health informatics — The architec-
definitions and tests 2024-06-11 ture of internet healthcare service
network 2024-05-13
(Revision of ISO 15883-1:2006/Amd
1:2014, ISO 15883-1:2006)
ISO/DTS 5788 Health informatics — Internet
TC 199 Safety of machinery healthcare service pattern
ISO/FDIS 13855 Safety of machinery — Positioning 2024-05-13
of safeguards with respect to the
approach of the human body 2024-06-18 ISO/DTR 6231 Health informatics — Standardiz-
ing graphical content
(Revision of ISO 13855:2010) 2024-05-07
ISO/FDIS 14119 Safety of machinery — Interlocking
devices associated with guards — ISO/DTS 9321 Health informatics — General re-
Principles for design and selection 2024-06-20 quirements of multi-centre medical
data collaborative analysis 2024-05-17
(Revision of ISO 14119:2013)
TC 202 Microbeam analysis ISO/IEEE FDIS Health informatics — Device inter-
11073-10421 operability — Part 10421: Personal
Health Device Communication — 2024-08-02
Device Specialization- Peak expira-
tory flow monitor (peak flow)

12 ISO Update, Supplement to ISO Focus -- April 2024

 (Revision of ISO/IEEE ISO/FDIS 7428-1 Fine bubble technology — Domes-
11073-10421:2012) tic applications — Part 1: Assess-
ISO/DTS 20428 Genomics Informatics — Data ment of showerhead devices by 2024-04-29
elements and their metadata evaluating size and concentration
for describing structured clinical 2024-05-02 indices of generated fine bubbles
genomic sequence information in CASCO Committee on conformity
electronic health records
(Revision of ISO/TS 20428:2017)
assessment
ISO/IEC DTS Guidelines for the use of remote
TC 219 Floor coverings
17012 auditing methods in auditing man-
ISO/FDIS 2424 Textile floor coverings agement systems 2024-05-14
— Vocabulary
2024-05-23
JTC 1 Information technology
(Revision of ISO 2424:2007) ISO/IEC 5087-2 Information technology — City
data model — Part 2: City level
TC 221 Geosynthetics concepts
ISO/FDIS Geotextiles and geotextile-related
ISO/IEC FDIS Smart cities — Guidance to
13426-2 products — Strength of internal
17917 establishing a decision-making
structural junctions — Part 2: 2024-05-09
framework for sharing data and 2024-05-24
Geocomposites
information services
(Revision of ISO 13426-2:2005)
ISO/IEC PRF Systems and software engineer-
TC 228 Tourism and related services 29110-1-1 ing — Lifecycle profiles for very
ISO/FDIS 18725 Tourism and related services — small entities (VSEs) — Part 1-1:
Yacht harbours and drystacks — Overview
Requirements for clean harbours 2024-05-13 (Revision of ISO/IEC TR
and active biodiversity harbours 29110-1:2016)
TC 249 Traditional Chinese medicine ISO/IEC PRF Systems and software engineer-
29110-1-2 ing — Lifecycle profiles for Very
ISO/FDIS 5076 Traditional Chinese medicine — Small Entities (VSEs) — Part 1-2:
<i>Angelica dahurica</i> root Vocabulary
2024-05-02
(Revision of ISO/IEC TR
29110-1:2016)
ISO/FDIS 9299 Traditional Chinese medicine —
ISO/IEC PRF Cards and security devices for
<i>Curcuma longa </i>rhizome
22460-2 personal identification — ISO UAS
2024-05-09
license and drone/UAS security
module — Part 2: Drone/UAS secu-
ISO/FDIS 13619 Traditional Chinese medicine — rity module
Gardenia jasminoides fruit
ISO/IEC FDIS Information security — Digital
2024-04-29
14888-4 signatures with appendix — Part 4:
Stateful hash-based mechanisms 2024-05-01
ISO/DTS Traditional Chinese medicine —
23961-3 Vocabulary for diagnostics — Part
ISO/IEC FDIS Cybersecurity – IoT security and pri-
3: Abdomen 2024-05-07
27403 vacy – Guidelines for IoT-domotics
2024-05-21
TC 251 Asset management
ISO/FDIS 55000 Asset management — Vocabulary, ISO/IEC FDIS Information technology — JPEG
overview and principles 18181-1 XL image coding system — Part 1:
2024-05-27 Core coding system 2024-05-02

(Revision of ISO 55000:2014) (Revision of ISO/IEC 18181-1:2022,

ISO/IEC 18181-1:2022/Amd 1:2022)
ISO/FDIS 55001 Asset management — Asset man-
agement system — Requirements ISO/IEC DTR Information technology — JPEG
2024-05-27 19566-9 Systems — Part 9: JPEG extensions
mechanisms to facilitate forwards 2024-05-27
(Revision of ISO 55001:2014) and backwards compatibility
ISO/FDIS 55012 Asset management — Guid- ISO/IEC FDIS Information technology — JPEG
ance on people involvement and 21122-1 XS low-latency lightweight image
competence 2024-05-27 coding system — Part 1: Core cod- 2024-05-02
ing system
(Revision of ISO/IEC 21122-1:2022)
ISO/FDIS 55013 Asset management — Guidance on
the management of data assets ISO/IEC DTR Information technology — MPEG
2024-05-27 23002-9 video technologies — Part 9: Film
grain synthesis technology for 2024-05-01
video applications
TC 268 Sustainable cities and
communities ISO/IEC PRF Information technology — Au-
16022 tomatic identification and data cap-
ISO/FDIS 37111 Sustainable cities and communities ture techniques — Data Matrix bar
− Urban settlements − Guidance code symbology specification
for a flexible approach to phased 2024-05-15 (Revision of ISO/IEC 16022:2006)
implementation of ISO 37101
TC 281 Fine bubble technology

ISO Update, Supplement to ISO Focus -- April 2024 13

 ISO/IEC FDIS Information technology — Biomet- ISO 68-1:2023 fr ISO general purpose screw threads
24741 rics — Overview and application — Basic and design profiles — Part 1:
2024-05-01 Metric screw threads A

(Revision of ISO/IEC TR 24741:2018)

TC 5 Ferrous metal pipes and metallic
ISO/IEC DTS Information technology — Cloud fittings
7339 computing — Overview of plat-
form capabilities type and platform 2024-05-06 ISO 16132:2024 en Ductile iron pipes and fittings — Seal
as a service coats for cement mortar linings
C
ISO/IEC FDIS Information technology — IT
30105-1 Enabled Services-Business Process
Outsourcing (ITES-BPO) lifecycle 2024-04-30 TC 6 Paper, board and pulps
processes — Part 1: Process refer- ISO 2469:2024 en Paper, board and pulps — Measure-
ence model (PRM) fr ment of diffuse radiance factor (diffuse
(Revision of ISO/IEC 30105-1:2016) reflectance factor) E
ISO/IEC FDIS Information technology — IT
30105-2 Enabled Services-Business Process TC 8 Ships and marine technology
Outsourcing (ITES-BPO) lifecycle 2024-04-30
processes — Part 2: Process assess- ISO 25862:2019/ en Ships and marine technology — Marine
ment model (PAM) Amd 1:2024 magnetic compasses, binnacles and azi-
(Revision of ISO/IEC 30105-2:2016) muth reading devices — Amendment 1 XZ

ISO/IEC FDIS Information technology — IT

30105-3 Enabled Services-Business Process ISO 5411:2024 en Ships and marine technology — Sub-
Outsourcing (ITES-BPO) lifecycle 2024-04-30 mersibles — Vocabulary
processes — Part 3: Measurement D
framework (MF) and organization
maturity model (OMM) TC 10 Technical product documentation
(Revision of ISO/IEC 30105-3:2016/
ISO 4172:2024 en Technical product documentation (TPD)
Amd 1:2020, ISO/IEC 30105-3:2016)
fr — Construction documentation —
ISO/IEC FDIS Information technology — IT Drawings for the assembly of prefabri- C
30105-5 Enabled Services-Business Process cated structures
Outsourcing (ITES-BPO) lifecycle 2024-04-30
ISO 7519:2024 en Technical product documentation
processes — Part 5: Guidance
fr (TPD) — Construction documentation
(Revision of ISO/IEC 30105-5:2016)
— General principles of presentation D
ISO/IEC FDIS Artificial intelligence — Data for general arrangement and assembly
5259-1 quality for analytics and machine drawings
learning (ML) — Part 1: Overview, 2024-05-27
terminology, and examples TC 17 Steel
ISO/IEC FDIS Artificial intelligence — Data ISO 4993:2024 en Steel and iron castings — Radiographic
5259-3 quality for analytics and machine testing
learning (ML) — Part 3: Data quality 2024-05-27 C
management requirements and
guidelines ISO fr Calculation method of carbon dioxide
ISO/IEC FDIS Artificial intelligence — Data 14404-4:2020 emission intensity from iron and steel
5259-4 quality for analytics and machine production — Part 4: Guidance for using F
learning (ML) — Part 4: Data quality 2024-05-27 the ISO 14404 series
process framework TC 20 Aircraft and space vehicles
ISO fr Aircraft ground handling — Checked
12604-2:2024 baggage — Part 2: Handling require-
ments and guidelines C

ISO en Aircraft ground support equipment

32312-11:2024 fr — Specific requirements — Part 11:
Container/Pallet dollies and loose load D
trailers
Standards published ISO 8575:2024 en Aerospace series — Fluid systems —
Hydraulic system tubing
B
New International Standards published between 01 March and 01 April
2024 ISO 14953:2024 en Space systems — Structural design
— Determination of loading levels for
1 delayed publication of language version static qualification testing of launch A
2 corrected version vehicles
3 multilingual document ISO 16454:2024 en Space systems — Structural design —
Stress analysis requirements
C
Price
group ISO 17520:2024 en Space environment (natural and artifi-
cial) — Cosmic ray and solar energetic
particle penetration inward the magne- C
TC 1 Screw threads
tosphere — Method of determination of
the effective vertical cut-off rigidity

14 ISO Update, Supplement to ISO Focus -- April 2024

 TC 22 Road vehicles ISO fr Microbiology of the food chain — Hori-
15213-2:2023 zontal method for the detection and
ISO en Road vehicles — Controller area net-
enumeration of F
11898-2:2024 work (CAN) — Part 2: High-speed physi-
<i>Clostridium</i> spp. — Part 2:
cal medium attachment (PMA) sublayer G
Enumeration of
<i>Clostridium</i>
TC 23 Tractors and machinery for agricul- <i>perfringens </i>by colony-count
ture and forestry technique

ISO 28139:2019/ en Equipment for crop protection — Knap- ISO 22000:2018/ es Food safety management systems —
Amd 1:2024 fr sack combustion engine-driven airblast Amd 1:2024 Requirements for any organization
sprayers — Safety and environmental XZ in the food chain — Amendment 1: free
requirements and test methods — Climate action changes
Amendment 1 ISO 34101- es Sustainable and traceable cocoa — Part
ISO 7448:2024 en Machinery for forestry — Machine-fed 1:2019/Amd 1: Requirements for cocoa sustainability
woody biomass reduction chippers, 1:2024 management systems — Amendment 1: free
grinders, and shredders — Vocabulary E Climate action changes
TC 35 Paints and varnishes
ISO en Irrigation techniques — Remote moni- ISO en Paints and varnishes — Evaluation of
21622-3:2024 toring and control for irrigation — Part 4628-10:2024 fr quantity and size of defects, and of
3: Interoperability H intensity of uniform changes in appear- B
ance — Part 10: Assessment of degree
TC 24 Particle characterization including of filiform corrosion
sieving ISO en Paints and varnishes — Coating materi-
ISO 13100:2024 en Methods for zeta potential determi- 16053-2:2024 als and coating systems for exterior
nation — Streaming potential and wood — Part 2: Exposure of wood C
streaming current methods for porous E coatings to artificial weathering using
materials fluorescent UV lamps and water

TC 27 Coal and coke ISO/TR en Rheological test methods — Fundamen-

20659-1:2024 tals and interlaboratory comparisons —
ISO 687:2024 en Coke — Determination of moisture in Part 1: Determination of the yield point C
the general analysis test sample
A
ISO/TR en Rheological test methods — Fundamen-
20659-2:2024 tals and interlaboratory comparisons —
TC 28 Petroleum and related products, Part 2: Determination of the time-de- F
fuels and lubricants from natural or pendent structural change (thixotropy)
synthetic sources TC 37 Language and terminology
ISO 4259-5:2023 en Petroleum and related products — ISO 11669:2024 en Translation projects — General
fr Precision of measurement methods and guidance
results — Part 5: Statistical assessment F E
of agreement between two different
measurement methods that claim to
measure the same property TC 38 Textiles
ISO 6996:2024 en Bunkering — Meter verification using ISO en Fibre ropes for offshore stationkeeping
master Coriolis mass flow meter 18692-5:2024 fr — Part 5: Aramid
C B

ISO 12185:2024 en Crude petroleum, petroleum products ISO en Textiles — Tests for colour fastness —
fr and related products — Determination 105-B04:2024 fr Part B04: Colour fastness to artificial
of density — Laboratory density meter B weathering: Xenon arc fading lamp test C
with an oscillating U-tube sensor
TC 29 Small tools TC 42 Photography
ISO 21538:2024 en Blanks for superabrasive cutting-off ISO/TS en Measuring autofocus repeatability of
fr wheels — Mounting and fixing bores 20490:2024 sharpness and latency
— Building construction and civil B D
engineering
TC 31 Tyres, rims and valves TC 43 Acoustics
ISO 4000-1:2024 en Passenger car tyres and rims — Part 1: ISO 7029:2017/ en Acoustics — Statistical distribution of
Tyres (metric series) Amd 1:2024 fr hearing thresholds related to age and
G gender — Amendment 1: Correction XZ
of parameter values for estimating the
hearing threshold distribution
ISO en Clamp-in tyre valves for tyre pressure
24163-1:2024 monitoring systems — Part 1: Definition, TC 44 Welding and allied processes
types, dimensions and valve interface B ISO 3834-6:2024 fr Quality requirements for fusion welding
of metallic materials — Part 6: Guide-
TC 34 Food products lines on implementing the ISO 3834 D
series
ISO 22662:2024 en Milk and milk products — Determi-
fr nation of lactose content by high- ISO 15610:2024 en Specification and qualification of weld-
performance liquid chromatography B fr ing procedures for metallic materials —
(reference method) Qualification based on tested welding A
consumables
TC 45 Rubber and rubber products

ISO Update, Supplement to ISO Focus -- April 2024 15

 ISO 1817:2024 en Rubber, vulcanized or thermoplastic — TC 71 Concrete, reinforced concrete and
fr Determination of the effect of liquids pre-stressed concrete
E
ISO en Maintenance and repair of concrete
16311-2:2024 structures — Part 2: Assessment of exist-
ISO 3384-1:2024 en Rubber, vulcanized or thermoplastic ing concrete structures F
fr — Determination of stress relaxation
in compression — Part 1: Testing at C
constant temperature ISO en Maintenance and repair of concrete
16311-3:2024 structures — Part 3: Design of repairs
ISO 7681:2024 en Natural rubber field latex — Determina- D
tion of dry rubber content
B
ISO en Maintenance and repair of concrete
16311-4:2024 structures — Part 4: Execution of repairs
TC 46 Information and documentation F
ISO 18128:2024 en Information and documentation —
Records risks — Risk assessment for TC 76 Transfusion, infusion and injection,
records management E and blood processing equipment
for medical and pharmaceutical use
TC 52 Light gauge metal containers ISO 8362-2:2024 en Injection containers and accessories —
ISO en Light gauge metal containers — Vo- fr Part 2: Closures for injection vials
24021-2:2024 cabulary and classification — Part 2: A
General cans C
TC 85 Nuclear energy, nuclear technolo-
TC 58 Gas cylinders gies, and radiological protection
ISO 10297:2024 en Gas cylinders — Cylinder valves — ISO 6980-2:2023 en Nuclear energy — Reference beta-
fr Specification and type testing fr particle radiation — Part 2: Calibration
G fundamentals related to basic quantities F
characterizing the radiation field
ISO 22435:2024 en Gas cylinders — Cylinder valves with ISO 4917-4:2024 en Design of nuclear power plants against
fr integrated pressure regulators — Speci- seismic events — Part 4: Components
fication and type testing E F

TC 59 Buildings and civil engineering TC 92 Fire safety

works ISO 6021:2024 en Firebrand generator
ISO en Industry Foundation Classes (IFC) for
16739-1:2024 data sharing in the construction and B
facility management industries — Part H
1: Data schema
TC 102 Iron ore and direct reduced iron
TC 61 Plastics ISO 8371:2024 en Iron ores for blast furnace feedstocks
ISO en Plastics — Determination of thermal — Determination of the decrepitation
22007-1:2024 fr conductivity and thermal diffusivity — index A
Part 1: General principles D
TC 104 Freight containers
ISO 34256:2024 en Adhesives for non-structural wood ap-
ISO/TS en Short-range wireless sensor to device
fr plications — Test method and require-
7344:2024 communication
ments for resistance to static load A
B

ISO 34257:2024 en Adhesives — Wood adhesives — Deter-

fr mination of tensile strength of lap joints
TC 106 Dentistry
at elevated temperature (WATT '91) A ISO 5365:2024 en Dentistry — Designation system for
fr tooth developmental stages
B
ISO 8060:2024 en Composites and reinforcements fibres
— Carbon fibre reinforced plastics
(CFRPs) and metal assemblies — Char- B TC 113 Hydrometry
acterization of durability of adhesive
ISO 19234:2024 en Hydrometry — Low cost baffles to aid
interfaces by wedge rupture test
fish passage on triangular profile gaug-
ISO 8605:2024 en Fibre-reinforced plastics — Sheet ing weirs D
moulding compound (SMC) — Require-
ments and specifications B
TC 114 Horology
ISO/TS en Laminates and moulding compounds — ISO 17514:2024 en Time-measuring instruments — Photo-
23927:2024 Prepregs — Determination of tack fr luminescent deposits — Test methods
B and requirements B

TC 67 Oil and gas industries including TC 121 Anaesthetic and respiratory

lower carbon energy equipment
ISO 13702:2024 en Oil and gas industries — Control and ISO en Biocompatibility evaluation of breathing
fr mitigation of fires and explosions on 18562-1:2024 fr gas pathways in healthcare applications
offshore production installations — G — Part 1: Evaluation and testing within E
Requirements and guidelines a risk management process

16 ISO Update, Supplement to ISO Focus -- April 2024

 ISO en Biocompatibility evaluation of breathing ISO/PAS en Sizing parameters of surgical valve
18562-2:2024 fr gas pathways in healthcare applica- 7020:2023 prostheses: Requirements regarding the
tions — Part 2: Tests for emissions of C application of ISO 5840-2 B
particulate matter
ISO en Biocompatibility evaluation of breathing TC 157 Non-systemic contraceptives and
18562-3:2024 fr gas pathways in healthcare applications STI barrier prophylactics
— Part 3: Tests for emissions of volatile C
organic substances ISO/TS en Compatibility of lubricants with syn-
23148:2024 thetic male condoms
ISO en Biocompatibility evaluation of breathing C
18562-4:2024 fr gas pathways in healthcare applica-
tions — Part 4: Tests for leachables in C
condensate TC 159 Ergonomics
ISO 81060- en Non-invasive sphygmomanometers — ISO/TR en Basic human body measurements for
2:2018/Amd fr Part 2: Clinical investigation of intermit- 7250-2:2024 fr technological design — Part 2: Statisti-
2:2024 tent automated measurement type — XZ cal summaries of body measurements G
Amendment 2 from national populations

ISO 16571:2024 en Systems for evacuation of plume gener- ISO en Ergonomics of human-system interac-
fr ated by medical devices 9241-115:2024 fr tion — Part 115: Guidance on concep-
F tual design, user-system interaction D
design, user interface design and
navigation design
TC 127 Earth-moving machinery
TC 166 Ceramic ware, glassware and glass
ISO 3164:2013/ en Earth-moving machinery — Laboratory ceramic ware in contact with food
Amd 1:2024 fr evaluations of protective structures —
Specifications for deflection-limiting XZ ISO 5644:2024 en Porcelain Tableware — Specification and
volume — Amendment 1 test method
B
TC 136 Furniture
ISO 12808:2024 en Hardware for furniture — Strength and TC 171 Document management
durability of extension elements and
applications
their components C
ISO en Document management applications
14289-2:2024 — Electronic document file format
TC 138 Plastics pipes, fittings and valves for enhancement for accessibility — Part 2: F
the transport of fluids Use of ISO 32000-2 (PDF/UA-2)
ISO 10928:2024 en Plastics piping systems — Glass- TC 172 Optics and photonics
reinforced thermosetting plastics (GRP)
pipes and fittings — Methods for regres- D ISO 9211-2:2024 fr Optics and photonics — Optical coat-
sion analysis and their use ings — Part 2: Optical properties
C
ISO 8233:2024 en Thermoplastics valves — Torque — Test
fr method
A ISO 9211-3:2024 fr Optics and photonics — Optical coat-
ings — Part 3: Environmental durability
C
TC 146 Air quality
ISO en Indoor air — Part 9: Determination IEC Medical electrical equipment — Part
16000-9:2024 fr of the emission of volatile organic 80601-2-58:2024 2-58: Particular requirements for basic
compounds from samples of building C safety and essential performance of lens G
products and furnishing — Emission removal devices and vitrectomy devices
test chamber method for ophthalmic surgery
ISO en Indoor air — Part 11: Determination TC 173 Assistive products
16000-11:2024 fr of the emission of volatile organic
compounds from samples of building C ISO 16021:2024 en Absorbent incontinence products for
products and furnishing — Sampling, urine and/or faeces — Basic principles
storage of samples and preparation of for evaluation of single-use adult prod- B
test specimens ucts from the perspective of users and
caregivers
TC 147 Water quality
ISO 6273:2024 en Assistive products — Accessibility
ISO en Water quality — Application of guidelines and requirements to survey
17294-1:2024 fr inductively coupled plasma mass the needs of persons with sensory D
spectrometry (ICP-MS) — Part 1: General E disabilities for assistive products and
requirements services
ISO 5667-3:2024 en Water quality — Sampling — Part 3: TC 174 Jewellery and precious metals
fr Preservation and handling of water
samples G ISO 24016:2020 en Jewellery and precious metals — Grad-
fr ing polished diamonds — Terminology,
classification and test methods G
TC 150 Implants for surgery
ISO en Implants for surgery — Metallic materi- TC 176 Quality management and quality
5832-11:2024 als — Part 11: Wrought titanium 6-alu-
minium 7-niobium alloy A
assurance
ISO 9001:2015/ es Quality management systems — Re-
Amd 1:2024 quirements — Amendment 1: Climate
action changes free

ISO Update, Supplement to ISO Focus -- April 2024 17

 TC 180 Solar energy ISO 20658:2023 es Requirements for the collection and
transport of samples for medical labora-
ISO 24194:2022/ en Solar energy — Collector fields — Check
tory examinations F
Amd 1:2024 fr of performance — Amendment 1
XZ
ISO 35001:2019/ es Biorisk management for laboratories
Amd 1:2024 and other related organisations —
TC 184 Automation systems and Amendment 1: Climate action changes free
integration
ISO en Data quality — Part 114: Master data: TC 213 Dimensional and geometrical prod-
8000-114:2024 Application of ISO/IEC 21778 and ISO
uct specifications and verification
8000-115 to portable data B
ISO en Geometrical product specifications
18183-1:2024 fr (GPS) — Partition — Part 1: Vocabulary
ISO en Automation systems and integration
and basic concepts C
16400-3:2024 — Equipment behaviour catalogues
for virtual production system — Part 3: D
Requirements and recommendations for TC 229 Nanotechnologies
construction of an equipment instance
ISO/TS en Nanotechnologies — Vocabulary
model
4958:2024 — Liposomes
TC 185 Safety devices for protection B
against excessive pressure
ISO en Safety devices for protection against ISO/TS en Nanotechnologies — Silica nanomateri-
4126-10:2024 fr excessive pressure — Part 10: Sizing of 22298:2024 als — Specification of characteristics
safety valves and bursting discs for gas/ G and measurement methods for silica B
liquid two-phase flow with ordered nanopore array (SONA)

TC 188 Small craft TC 232 Education and learning services

ISO en Small craft — Hull construction and ISO 21001:2018/ es Educational organizations — Manage-
12215-5:2019 fr scantlings — Part 5: Design pressures for Amd 1:2024 ment systems for educational organiza-
monohulls, design stresses, scantlings H tions — Requirements with guidance free
determination for use — Amendment 1: Climate action
changes
TC 193 Natural gas
TC 234 Fisheries and aquaculture
ISO 2620:2024 en Analysis of natural gas — Biomethane
fr — Determination of VOCs by thermal ISO 17273:2024 en Waste management and reduction from
desorption gas chromatography with B aquaculture facilities in natural water
flame ionization and/or mass spectrom- bodies — Principles and guidelines B
etry detectors
TC 198 Sterilization of health care products TC 238 Solid biofuels
ISO 17665:2024 en Sterilization of health care products ISO en Solid biofuels — Determination of
fr — Moist heat — Requirements for the 18134-2:2024 fr moisture content — Part 2: Simplified
development, validation and routine H method A
control of a sterilization process for
medical devices TC 249 Traditional Chinese medicine
TC 204 Intelligent transport systems ISO 8071:2024 en Traditional Chinese medicine —
ISO 12813:2024 fr Electronic fee collection — Compliance <i>Ligusticum chuanxiong</i> rhizome
check communication for autonomous C
systems G
TC 256 Pigments, dyestuffs and extenders
ISO 13141:2024 fr Electronic fee collection — Localiza- ISO 3549:2024 fr Zinc dust pigments for paints — Specifi-
tion augmentation communication for cations and test methods
autonomous systems F D

ISO en Intelligent transport systems — Frame- TC 260 Human resource management

15638-25:2024 work for collaborative telematics appli-
cations for regulated commercial freight D ISO 30401:2018/ fr Knowledge management systems —
vehicles (TARV) — Part 25: Overhead Amd 1:2022 Requirements — Amendment 1
clearance monitoring XZ
ISO 21177:2024 en Intelligent transport systems — ITS
fr station security services for secure ses- ISO/TS en Human resource management — Em-
sion establishment and authentication H 30438:2024 fr ployee engagement metrics
between trusted devices D
ISO 24311:2024 en Intelligent transport systems — Mobil-
ity integration — 'Controlled zone' TC 261 Additive manufacturing
management for urban vehicle access D ISO/ASTM en Additive manufacturing — General
restrictions (UVARs) using C-ITS 52927:2024 fr principles — Main characteristics and
TC 207 Environmental management corresponding test methods D
ISO 14001:2015/ es Environmental management systems —
Amd 1:2024 Requirements with guidance for use — ISO/ASTM en Additive manufacturing — Environ-
Amendment 1: Climate action changes free 52933:2024 fr ment, health and safety — Test method
for the hazardous substances emitted D
from material extrusion type 3D printers
TC 212 Medical laboratories and in vitro in the non-industrial places
diagnostic systems

18 ISO Update, Supplement to ISO Focus -- April 2024

 TC 267 Facility management ISO/IEC en Information technology — AT Attach-
17760-105:2024 ment — Part 105: ATA Command Set - 5
ISO 41017:2024 en Facility management — Guidance on
(ACS-5) H
fr emergency preparedness and manage-
ment of an epidemic D
ISO/IEC en Information technology — EPC Informa-
19987:2024 tion Services (EPCIS)
TC 268 Sustainable cities and communities H
ISO/TR en Sustainable cities and communities —
37112:2024 Case studies in how smart city operating ISO/IEC en Information technology — GS1 Core
models support an effective public- E 19988:2024 Business Vocabulary (CBV)
health emergency response H
TC 269 Railway applications
ISO 5735-1:2024 en Railway infrastructure — Non-destruc- ISO/IEC en Information technology — Software
tive testing on rails in track — Part 1: 21031:2024 Carbon Intensity (SCI) specification
Requirements for ultrasonic testing and G B
evaluation principles
ISO 24221:2024 en Railway applications — Braking system ISO/IEC/IEEE en Systems and software engineering —
fr — General requirements 24748-1:2024 Life cycle management — Part 1: Guide-
D lines for life cycle management G

TC 276 Biotechnology ISO/IEC/IEEE en Systems and software engineering —

24748-2:2024 Life cycle management — Part 2: Guide-
ISO en Biotechnology — Nucleic acid synthesis lines for the application of ISO/IEC/IEEE G
20688-2:2024 — Part 2: Requirements for the produc- 15288 (system life cycle processes)
tion and quality control of synthesized E
gene fragments, genes, and genomes ISO/IEC en Systems and software engineering —
25002:2024 Systems and software Quality Require-
TC 281 Fine bubble technology ments and Evaluation (SQuaRE) — Qual- C
ISO 7383-1:2024 en Fine bubble technology — Evaluation ity model overview and usage
method for determining gas content in ISO/IEC en Information technology — Home Elec-
fine bubble dispersions in water — Part B 15067-3-30:2024 tronic System (HES) application model
1: Oxygen content — Part 3-30: Energy management agent C
TC 283 Occupational health and safety functional requirements and interfaces
management ISO/IEC en Information technology — Home Elec-
15067-3-31:2024 tronic System (HES) application model
ISO 45001:2018/ es Occupational health and safety manage-
— Part 3-31: Protocol of energy man- F
Amd 1:2024 ment systems — Requirements with
agement agents for demand-response
guidance for use — Amendment 1: free
energy management and interactions
Climate action changes
among these agents
ISO 45004:2024 en Occupational health and safety manage-
ISO/IEC en Information security — Secure multipar-
ment — Guidelines on performance
4922-2:2024 ty computation — Part 2: Mechanisms
evaluation E
based on secret sharing E

TC 299 Robotics
ISO/IEC TS en Information security, cybersecurity and
IEC 80601-2- Medical electrical equipment — Part 24462:2024 privacy protection — Ontology building
78:2019/Amd 2-78: Particular requirements for basic blocks for security and risk assessment F
1:2024 safety and essential performance of BM
medical robots for rehabilitation, assess-
ISO/IEC en Information security, cybersecurity and
ment, compensation or alleviation —
27006-1:2024 fr privacy protection — Requirements for
Amendment 1
bodies providing audit and certification F
TC 301 Energy management and energy of information security management
savings systems — Part 1: General
ISO 50001:2018/ es Energy management systems — Re- ISO/IEC en Information security, cybersecurity and
Amd 1:2024 quirements with guidance for use — 27011:2024 privacy protection — Information secu-
Amendment 1: Climate action changes free rity controls based on ISO/IEC 27002 for E
telecommunications organizations

TC 309 Governance of organizations ISO/IEC en Information security, cybersecurity and

27561:2024 privacy protection — Privacy opera-
ISO 37001:2016/ es Anti-bribery management systems — tionalisation model and method for E
Amd 1:2024 Requirements with guidance for use — engineering (POMME)
Amendment 1: Climate action changes free
ISO/IEC en Information technology — Coded rep-
23090-21:2024 resentation of immersive media — Part
ISO 37301:2021/ es Compliance management systems — 21: Reference software for Geometry- A
Amd 1:2024 Requirements with guidance for use — based Point Cloud Compression (G-PCC)
Amendment 1: Climate action changes free
ISO/IEC en Information technology — Genomic
23092-2:2024 information representation — Part 2:
JTC 1 Information technology Coding of genomic information H
ISO/IEC en Information technology — City service
5153-1:2024 platform for public health emergen- ISO/IEC en Information technology — Use of biom-
cies — Part 1: Overview and general C 30137-1:2024 etrics in video surveillance systems —
requirements Part 1: System design and specification F

ISO Update, Supplement to ISO Focus -- April 2024 19

 ISO/IEC en Information technology — Artificial TC 23 Tractors and machinery for agriculture and
5392:2024 intelligence — Reference architecture of forestry
knowledge engineering F
ISO 11783-14:2013 (reconfirmed)
TC 27 Coal and coke
ISO 15239:2005 (reconfirmed)
TC 29 Small tools
ISO 603-18:2013 (reconfirmed)
ISO 9136-1:2004 (reconfirmed)
ISO 9284:2013 (reconfirmed)

Standards confirmed ISO 9285:1997 (reconfirmed)

ISO 15637-1:2002 (reconfirmed)
ISO 15637-2:2002 (reconfirmed)
The following International Standards are confimred for a five year period:
ISO 11901-2:2018
ISO 20929:2018
TC 6 Paper, board and pulps
TC 30 Measurement of fluid flow in closed conduits
ISO 7263-1:2018
ISO 7066-2:1988 (reconfirmed)
ISO 7263-2:2018
TC 31 Tyres, rims and valves
ISO 8791-2:2013 (reconfirmed)
ISO 16392:2017
TC 8 Ships and marine technology
TC 33 Refractories
ISO 13122:2011 (reconfirmed)
ISO 16169:2018
ISO 22673:2008 (reconfirmed)
TC 34 Food products
ISO 5894:2018
ISO 5534:2004 (reconfirmed)
TC 10 Technical product documentation
ISO 8968-3:2004 (reconfirmed)
ISO 10628-2:2012 (reconfirmed)
ISO 15151:2018
TC 17 Steel
ISO 21424:2018
ISO 683-15:1992 (reconfirmed)
ISO/TS 21872-2:2020
TC 20 Aircraft and space vehicles
TC 36 Cinematography
ISO 20949:2018
ISO 9642:2020
ISO 2533:1975 (reconfirmed)
TC 38 Textiles
ISO 9206:2018
ISO 15831:2004 (reconfirmed)
ISO 16031-1:2002 (reconfirmed)
ISO 1139:1973 (reconfirmed)
TC 21 Equipment for fire protection and fire
ISO 8159:1987 (reconfirmed)
fighting
ISO 21927-1:2008 (reconfirmed)
TC 41 Pulleys and belts (including veebelts)
ISO 21183-2:2018
ISO 21927-7:2017 (reconfirmed)
ISO 21927-8:2017 (reconfirmed) TC 43 Acoustics
ISO 21927-9:2012 (reconfirmed) ISO 11904-1:2002 (reconfirmed)

ISO 21927-10:2011 (reconfirmed) ISO 4869-1:2018

ISO 4869-2:2018
TC 22 Road vehicles
ISO 7235:2003 (reconfirmed)
ISO 2416:1992 (reconfirmed)
ISO 7779:2018
ISO 3208:1974 (reconfirmed)
ISO 9645:1990 (reconfirmed)
ISO 4030:1983 (reconfirmed)
ISO 10847:1997 (reconfirmed)
ISO 22628:2002 (reconfirmed)
ISO 11821:1997 (reconfirmed)
ISO 18541-5:2018
ISO 13473-3:2002 (reconfirmed)
ISO 27145-1:2012 (reconfirmed)
ISO 27145-2:2012 (reconfirmed) TC 44 Welding and allied processes
ISO 27145-3:2012 (reconfirmed) ISO 9312:2013 (reconfirmed)

ISO 6624-2:2016 (reconfirmed) ISO 12996:2013 (reconfirmed)

ISO 6624-4:2016 (reconfirmed) ISO 14271:2017

ISO 3560:2013 (reconfirmed) ISO 14554-1:2013 (reconfirmed)

ISO 8721:2018 ISO 14554-2:2013 (reconfirmed)

ISO 13216-3:2018 ISO 17653:2012 (reconfirmed)

ISO 17949:2013 (reconfirmed) ISO 18278-3:2017

ISO 27956:2009 (reconfirmed) ISO 22829:2017

TC 45 Rubber and rubber products

20 ISO Update, Supplement to ISO Focus -- April 2024

 ISO 1856:2018 ISO 21164:2018
ISO 3386-2:1997 (reconfirmed) TC 108 Mechanical vibration, shock and condition
ISO 5999:2013 (reconfirmed) monitoring
ISO 6453:1985 (reconfirmed) ISO 2041:2018

TC 54 Essential oils ISO 16063-44:2018

ISO 4716:2013 (reconfirmed) ISO 10819:2013 (reconfirmed)

TC 58 Gas cylinders TC 121 Anaesthetic and respiratory equipment

ISO 3807:2013 (reconfirmed) ISO 81060-2:2018

ISO 12209:2013 (reconfirmed) TC 122 Packaging

TC 61 Plastics ISO 8768:1987 (reconfirmed)

ISO 527-3:2018 ISO 14375:2018

ISO 11502:2018 ISO 28862:2018

ISO 20457:2018 TC 126 Tobacco and tobacco products

ISO 20337:2018 ISO 20778:2018

TC 67 Oil and gas industries including lower carbon TC 127 Earth-moving machinery
energy ISO 6392-1:1996 (reconfirmed)
ISO 14998:2013 (reconfirmed) ISO 6747:2013 (reconfirmed)
TC 68 Financial services ISO 7133:2013 (reconfirmed)
ISO/TS 23029:2020 ISO 7134:2013 (reconfirmed)
TC 69 Applications of statistical methods ISO/TS 9250-1:2012 (reconfirmed)
ISO 3534-3:2013 (reconfirmed) ISO/TS 9250-2:2012 (reconfirmed)
TC 72 Textile machinery and accessories TC 130 Graphic technology
ISO 9903-1:2003 (reconfirmed) ISO/TS 15311-1:2020
ISO 9903-2:2003 (reconfirmed) ISO 16759:2013 (reconfirmed)
ISO 21485:2013 (reconfirmed) ISO 19302:2018
TC 76 Transfusion, infusion and injection, and ISO 20294:2018
blood processing equipment for medical and ISO 21632:2018
pharmaceutical use
TC 131 Fluid power systems
ISO 8362-1:2018
ISO 18582-2:2018
TC 81 Common names for pesticides and other
TC 142 Cleaning equipment for air and other gases
agrochemicals
ISO 21083-1:2018
ISO 257:2018
TC 146 Air quality
TC 82 Mining
ISO 11041:1996 (reconfirmed)
ISO 19296:2018
ISO 17091:2013 (reconfirmed)
TC 84 Devices for administration of medicinal prod-
ucts and catheters ISO 21832:2018

ISO 7886-4:2018 ISO 28902-3:2018

TC 86 Refrigeration and air-conditioning ISO 16000-13:2008 (reconfirmed)

ISO 16358-1:2013 ISO 16000-15:2008 (reconfirmed)

ISO 18326:2018 ISO 16000-16:2008 (reconfirmed)

ISO 16000-17:2008 (reconfirmed)
TC 92 Fire safety
ISO 16000-23:2018
ISO/TS 17755-2:2020
ISO 16000-24:2018
TC 94 Personal safety -- Personal protective
equipment ISO 16000-36:2018
ISO 16900-2:2017 TC 147 Water quality
ISO 16900-3:2012 (reconfirmed) ISO 20950-1:2018
ISO 16900-4:2011 (reconfirmed) TC 150 Implants for surgery
TC 104 Freight containers ISO/TS 20721:2020 (reconfirmed)
ISO 1496-2:2018 ISO 13779-2:2018
TC 106 Dentistry ISO 13779-4:2018
ISO/TS 20746:2016 (reconfirmed) TC 154 Processes, data elements and documents in
ISO 29022:2013 (reconfirmed)
commerce, industry and administration
ISO/TS 20625:2002 (reconfirmed)
TC 107 Metallic and other inorganic coatings
ISO 13826:2013 (reconfirmed)
TC 155 Nickel and nickel alloys
ISO 6351:1985 (reconfirmed)
ISO 15724:2001 (reconfirmed)

ISO Update, Supplement to ISO Focus -- April 2024 21

 ISO 6352:1985 (reconfirmed) ISO 22326:2018
ISO 7523:1985 (reconfirmed) JTC 1 Information technology
ISO 23166:2018 ISO/IEC 7816-2:2007 (reconfirmed)
TC 156 Corrosion of metals and alloys ISO/IEC 7816-7:1999 (reconfirmed)
ISO 21153:2018 ISO/IEC (reconfirmed)
7816-12:2005
TC 160 Glass in building
ISO/IEC (reconfirmed)
ISO 10291:1994 (reconfirmed)
15457-1:2008
TC 163 Thermal performance and energy use in the ISO/IEC (reconfirmed)
built environment 15457-2:2007
ISO 24353:2008 (reconfirmed) ISO/IEC (reconfirmed)
TC 172 Optics and photonics 15457-3:2008

ISO 19012-1:2013 (reconfirmed) ISO/IEC

18013-1:2018
ISO 19012-2:2013 (reconfirmed)
ISO/IEC (reconfirmed)
TC 180 Solar energy 10967-1:2012
ISO 9060:2018 ISO/IEC 10744:1997 (reconfirmed)
TC 182 Geotechnics ISO/IEC
ISO 17892-10:2018 19086-2:2018

ISO 22477-1:2018
TC 190 Soil quality
ISO 17380:2013 (reconfirmed)
TC 192 Gas turbines

Standards withdrawn
ISO 19372:2015 (reconfirmed)
TC 198 Sterilization of health care products
ISO 25424:2018
TC 199 Safety of machinery Period from 01 March to 01 April 2024
ISO 13856-3:2013 (reconfirmed)
TC 206 Fine ceramics TC 21 Equipment for fire protection and fire
ISO 17095:2013 (reconfirmed) fighting
ISO 17167:2018 ISO 16003:2008 (replaced by )

TC 213 Dimensional and geometrical product speci- TC 34 Food products

fications and verification ISO 10633-1:1995 (replaced by )
ISO 14405-2:2018 ISO 1838:1993 (replaced by )
ISO 14978:2018 ISO 1990-2:1985 (replaced by )
TC 216 Footwear ISO 1991-2:1995 (replaced by )
ISO 19953:2004 (reconfirmed) ISO 4187:1980 (replaced by )
ISO 19956:2004 (reconfirmed) ISO 5516:1978 (replaced by )
ISO 22654:2002 (reconfirmed) ISO 6478:1990 (replaced by )
TC 226 Materials for the production of primary ISO 6479:1984 (replaced by )
aluminium ISO 6756:1984 (replaced by )
ISO 12315:2010 (reconfirmed) ISO 9930:1993 (replaced by )
ISO 12985-1:2018 TC 37 Language and terminology
ISO 12985-2:2018 ISO/TS 11669:2012 (replaced by ISO 11669:2024)
TC 229 Nanotechnologies ISO 20108:2017 (replaced by )
ISO/TS 11888:2017 (reconfirmed) TC 38 Textiles
ISO/TS 80004-3:2020 ISO/TS 17920:2015 (replaced by ISO 18692-5:2024)
ISO/TS 80004-8:2020 TC 46 Information and documentation
TC 232 Education and learning services ISO/TR 18128:2014 (replaced by ISO 18128:2024)
ISO 29992:2018 TC 59 Buildings and civil engineering works
TC 249 Traditional Chinese medicine ISO 9836:2017 (replaced by )
ISO 20334:2018 TC 113 Hydrometry
TC 260 Human resource management ISO/TR 19234:2016 (replaced by ISO 19234:2024)
ISO/TS 30407:2017 (reconfirmed) TC 159 Ergonomics
TC 292 Security and resilience ISO 14915-2:2003 (replaced by ISO 9241-115:2024)
ISO 22320:2018 TC 198 Sterilization of health care products

22 ISO Update, Supplement to ISO Focus -- April 2024

 ISO 17665-1:2006 (replaced by ISO 17665:2024)
ISO/TS 17665-2:2009 (replaced by ISO 17665:2024)
ISO/TS 17665-3:2013 (replaced by ISO 17665:2024)
TC 213 Dimensional and geometrical product speci-
fications and verification
ISO 7863:1984 (replaced by )
TC 261 Additive manufacturing
ISO 17296-3:2014 (replaced by ISO/ASTM 52927:2024)
JTC 1 Information technology
ISO/IEC 25010:2011 (replaced by ISO/IEC 25010:2023, ISO/IEC
25002:2024, ISO/IEC 25019:2023)
ISO/IEC 27006:2015 (replaced by ISO/IEC 27006-1:2024)
ISO/IEC 27006:2015/ (replaced by ISO/IEC 27006-1:2024)
Amd 1:2020

Meeting calendar
The meeting calendar is available at
https://www.iso.org/meeting-calendar.html

ISO Update, Supplement to ISO Focus -- April 2024 23