Scribd
Upload
37 views3 pages

QP 2017-Model 1

Uploaded by

nithya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
37 views3 pages

QP 2017-Model 1

Uploaded by

nithya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

REG NO

7. Two parallel connected discrete time impulse responses h1(n) and h2 (n)
can be replaced by single equivalent discrete time system with the
SRM UNIVERSITY - Ramapuram Campus impulse response
DEPARTMENT OF EEE
CYCLE TEST-I (a) h1(n) * h2 (n) (b) h1 (n) + h2 (n) (c) h1 (n) - h2 (n)
15EE1023-Discrete Transforms & Signal Processing
Time: 3hrs Max. Mark: 100 Date: (d) h1 (n) *[ h1 (n)+ h2 (n)]

PART - A (15 x1 = 15Marks) 8. DIT algorithm divides sequence into


Answer ALL Questions
(a) positive & negative sequence (b) Even & Odd samples
1. The process of conversion of continuous time signal into discrete time
(c) Upper higher & lower spectrum (d) Small & Large sample
signal is known as
9. In an N point sequence, if N=16, the total number of complex additions
(a) Aliasing (b) Sampling (c) Convolution (d) Corelation and multiplications using radix-2 FFT are

2. For energy signals, energy will be finite and average power will be (a) 64 & 80 (b) 80 & 64 (c) 64 & 32 (d) 24 & 12

(a) Infinite (b) finite (c) zero (d) cannot be defined 10. If X(k) is DFT of x(n) then what is the DFT of X*(n)

3. The unit step signal U (n) delayed by 3 units of time is denoted as (a) X(N-K) (b) X* (K) (c) X* (N-K) (d) X* (-K)

(a) U(n+3) (b) U(n-3) (c) U(3-n) (d) U (3+n) 11. DFT is applied to

4. If x (n) =an U (n) is the input signal, then particular solution yp (n) will (a) (a) Infinite sequences (b) Finite Discrete sequences
be
(b) (c) Continuous infinite signals (d) Continuous finite Signals
(a) Kn an U(n) (b) K an U(n) (c)K1 an U(n) + K2 an U(n) (d) K a-nu(n)
(c) 12. Calculate DFT of x(n)={1,0,1,0}
5. An LTI discrete system is casual if and only if (d) (a)X(k)={2,0,2,0} (b) X(k)={ 1,0,1,0}
(a) h(n) ±0,n<0 (b) h(n) =0,n<0 (c) h(n) ±∞,n<0 (d) h(n) ±0,n>0 (e) (c) X(k)={2,0,1,0} (d) X(k)={1,0,2,0}
6. Which of the following system is causal? (f) 13. If x (n) and X (k) are N point DFT pair, then X(k+n)=?
(a) h(n) = n(1/2)n u(n+1) (b) y(n) = X2 (n) –X(n+1) (g) (a)X(-k) (b) -X(k) (c) X(k) (d) X(N-k)
(c) y(n) = X(-n) + X(2n-1) (d) h(n) = = n(1/2)n u(n)
14. The even part of signal x(n)=3ejπn/5 is ii) Convert the analog filter Ha (s) = ------------------- into digital IIR
( S+1) (S+3) (6)
(a) jsin πn/5 (b) sin πn/5 (c) jcos πn/5 (d) cos πn/5
Filter by means of Bilinear Transformation method with T=1 sec.
15. The DFT of product of two discrete time sequence x1 (n) and x2 (n) is
29.a) Obtain Direct Form I, Direct Form II and Cascade form realization of
(a) 1/N[X1 (k)  X2 (k)] (b) 1/N[X1 (k) X2 (k)]
H(z) = (1-1/4 z-1 +3/8 z-2 )( 1-1/8 z-1 +1/2 z-2 )
(c) 1/N[X1 (k)  X2* (k)] (d) [X1 (k) * X2 (k)] OR
b) Design a Chebyshev low pass filter with αp =1db ripple in pass band
PART-B(5*4=20) 0 ≤ ω ≤ 0.2∏ , αs =15db ripple in stop band 0.3∏ ≤ ω ≤ ∏ using
Bilinear transformation
Answer any 5
30.a) Determine coefficient of linear phase FIR filter of length M=15, has
21. Mention the properties of Butterworth filter symmetric unit sample response and frequency response that
22. Compare IIR and FIR filter satisfies
23. Explain the characteristics of window function 2∏K
24. State the properties of FIR filter H (------- ) = 1, K= 0,1,2,3
25. List the advantages of VLIW architecture 15
26. Define Pipelining = 0, K = 4,5,6,7

b) Design a filter with Hd (ejw ) =1, ∏/4 ≤ ∣ω ∣ ≤ ∏


27. Differentiate between Van Neumann & Harvard Architecture OR

∣ω ∣ ≤ ∏ /4 for N=11 using


PART-C (5 x 12 = 60 Marks)
= 0,
28.a) Using Bilinear Transformation design a digital IIR Butterworth filter Hanning window

0.707 ≤ ∣H(ejw )∣ ≤ 1,
Satisfying the constraints
0≤ ω≤∏/2 31.a) Design a linear phase FIR filter with cut off frequency of ∏ /4

∣H(ejw )∣ ≤ 0.2, 3∏ / 4 ≤ ω ≤ ∏ with T=1sec.


radians using hamming window for N=9
OR
b) Write short notes on i) Van Neumann ii) Harvard architecture
OR
32.a) Explain in detail the architecture of TMS320C50 processor
S+0.1
OR
b) i) Convert the analog filter Ha (s) = ------------------- into digital IIR b) Write short notes on i) SIMD ii) VLIW processing
( S+0.1)2 +9

Filter by means of Impulse Invariant method with T=1 sec. (6)

You might also like