Scribd
Upload
26 views5 pages

Tutorial 10-1

Uploaded by

usha09261
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views5 pages

Tutorial 10-1

Uploaded by

usha09261
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

-Tutorial 10

ELL 101

1. Fixed Bias. Determine the following


a. 𝐼𝐵𝑄 and 𝐼𝐶 𝑄
b. 𝑉𝐶𝐸 𝑄
c. 𝑉𝐵 and 𝑉𝐶
d. 𝑉𝐵𝐶

2. Fixed current Bias Network. For the given fig below.

Determine
a. 𝐼𝐵 b. 𝐼𝐶 c. 𝑉𝐶𝐸 d. 𝑉𝐶 e. 𝑉𝐸 f. 𝑉𝐵 g. 𝑉𝐵𝐶

3. Common Base Configuration. The npn transistor of Fig 1 has the emitter characteristics of
Fig 2. If the emitter current is -10 mA and the collector-base voltage is 15V, estimate the
emitter-base voltage. If 𝛼 = 0.96 and the collector cutoff current =0.01 mA, estimate the
collector current.

Fig 1 Fig 2
4. Load line analysis
a. Draw the load line for the network of Fig 3 on the characteristics for the transistor
appearing in Fig 4.
b. For a 𝑄-point at the intersection of the load line with a base current of 15µ , find the
values of 𝐼𝐶 𝑄 𝑎𝑛𝑑 𝑉𝐶𝐸 𝑄
c. Determine the dc beta at the 𝑄-point

Fig 3 Fig 4
5. Self-Bias. Determine the dc bias voltage 𝑉𝐶𝐸 and the current 𝐼𝐶 for the following
configuration

6. Collector to Base feedback resistor. For the network of fig given below
a. Determine 𝐼𝐶 𝑄 𝑎𝑛𝑑 𝑉𝐶𝐸 𝑄
b. Find 𝑉𝐵 , 𝑉𝐶 , 𝑉𝐸 𝑎𝑛𝑑 𝑉𝐵𝐶

7. Current mirror. Calculate the current 𝐼 through each of the transistor 𝑄2 𝑎𝑛𝑑 𝑄3 in the
circuit of Fig 5
Fig 5
8. AC analysis. In the amplifier of Fig given below 𝑉𝐶𝐶 = 15𝑉 𝑎𝑛𝑑 the quiescent point
𝑄 𝑖𝑠 𝑎𝑡 𝑖𝐵 = 𝐼𝐵 = 0.1𝑚𝐴 𝑎𝑛𝑑 𝑣𝐶𝐸 = 𝑉𝐶𝐸 = 9𝑉. Specify 𝑅𝐿 and predict the current gain
and output voltage for an input current 𝑖𝑖 = 0.05𝑠𝑖𝑛𝜔𝑡 𝑚𝐴.

9. AC analysis. The silicon BJT of Fig 7 is used in circuit of Fig 6 𝐼𝐵 = 0.1𝑚𝐴 , 𝑅𝐿 = 2 𝐾𝑖𝑙𝑜 −
𝑜ℎ𝑚, 𝑎𝑛𝑑 𝑉𝐶𝐶 = 20𝑉
a. Estimate 𝛽 from the graph, and predict 𝐼𝐶 at the Q-point.
b. Reproduce the collector characteristics and draw the load line. Determine 𝐼𝐶
graphically.
c. Find 𝐼𝑐 for 𝑖𝑖 = 0, +50 𝑎𝑛𝑑 − 50 µ𝐴.
d. If 𝑖𝑖 is a sinusoid varying between +50 𝑎𝑛𝑑 − 50µ𝐴 .Find 𝐴𝐼 and write an expression
for 𝑖𝐶 (𝑡).
Fig 6 Fig 7

You might also like