--------------------------------------------------------------

v2.9.4b36
$ fixed: incorrect display of total mileage on some PQ35
$ fixed: broken images (Air suspension and TPMS)

--------------------------------------------------------------
v2.9.4b35
$ fixed: false triggering of low oil pressure (TFSI engines)
$ fixed: blocking of audio data when telematics phone is present

--------------------------------------------------------------
v2.9.4b34
$ fixed: some Info-CAN issues
$ fixed: CAN-monitor issues
$ fixed: display current gear while use CCS (manual transmission)
$ updated: air suspension support
$ updated: CNG support
$ updated: optimization of the diagnostic protocol and adding more texts of error
codes
$ updated: control buttons usage (MFSW support also updated)
+ added: CCS speed calibration
+ added: advanced service settings
+ added: manual setting for speedup time measure

--------------------------------------------------------------
v2.9.4b33
$ changed: sleep mode
$ updated: OPS A3 support
$ updated: OPS A6C6 support
$ fixed: gauge scales for boost pressure
$ fixed: translation for some languages
$ updated: main code for processor hardware
+ added: additional tooltip for gear shifting (manual transmission)
+ added: the ability to connect a reverse gear signal to TrInput15 (A38L, TT8N,
Sharan) (manual transmission)
+ added: overspeed alarm by tire index
+ added: display of total mileage and time in the upper area

--------------------------------------------------------------
v2.9.4b32
$ changed: updated support of original TPMS
$ fixed: sleep mode issue (A4(8E), A3(8P), A2)
$ fixed: some small bugs in BAP protocol
$ fixed: coffee-break settings
+ added: support original BiFuel cars (gas + petrol)
$ fixed: small bugs in Extended Info screen
+ added: more values on Extended Info screen
$ changed: faster update 'boost' on screen
$ changed: 'boost' calibration from analog sources
+ added: Trip2 data to main selection of displayed values (disabled hot key for
switching Trip1/Trip2 on main screen)
+ added: consumption at idle on bottom of screen
+ added: display selectable or fixed data in 'OK' area (if there are no errors)
--------------------------------------------------------------
v2.9.4b31
$ fixed: error is TP2.0 and TP1.6

--------------------------------------------------------------
v2.9.4b30
$ changed: diagnostic connection mode
+ added: some diagnostics protocols support
+ added: show outside temperature to center main screen
+ added: DDP2 and BAP support for audio/navi (experimental)
+ added: user custom units settings
+ added: coffee-break with distance check
+ added: Trip3 (need enable in hidden menu)
$ changed: average consumption calculation
+ added: some statistics values for TripX
$ fixed: DDP (VW) connection problem in some cars/navi
$ fixed: some small bugs in code and in translations

--------------------------------------------------------------
v2.9.4b29
$ changed: car images (firmwares b5* and sharan)
$ changed: selection CAN-bus as boost source (if supported in car)
$ changed: oil level calculation
+ added: brightness calibration (for automatic mode only)
+ added: rear gear connection to TrInput12 for A6 (manual transmission)
$ changed: rewrited code for CAN-bus driver and audio/navi protocols
+ added: display Trip2 data in main screen (avg.cons., avg.speed, traveled dist.,
traveled time) - hold "reset" and immediately press "up"

--------------------------------------------------------------
v2.9.4b28
$ changed: optimizing startup logo and animation
$ fixed: gauges drawing
$ changed: displaying lamp error mode (Sharan)
$ changed: speedup backlight at startup while logo/animation show
$ fixed: compressor error
$ changed: displayed list of ECUs for diagnostics (Audi �3)
$ fixed: some small bugs
+ added: show image/animation/trip data at poweroff (aka "goodbye" mode)
+ added: check rear left sliding door (�4)
+ added: Slovak translation
+ added: Portuguese translation

--------------------------------------------------------------
v2.9.4b27
$ fixed: audio data shown from Audi CD
$ fixed: oil level calculation for some engines
+ added: uploading 4 static logos and 2 animated logos
+ added: Ford Galaxy support (Sharan firmware)
+ added: Ford logo (Sharan firmware)
+ added: lamps control support (Sharan) - need make additional connection
$ changed: back old Sharan car image
+ added: Lithuanian translation
--------------------------------------------------------------
v2.9.4b26
$ fixed: show doors in RHD (immo2)
$ fixed: bug with scroll audio data
$ changed: Ukrainian translation
+ added: "max" point to gauges (reset by long press "reset" button)
$ change: oil level calculation

--------------------------------------------------------------
v2.9.4b25
$ fixed: diagnostics (CAN and K-line)
$ fixed: audio/navi works for A3/TT
$ changed: brigthness control in automatic mode
$ fixed: service reminder calculation
+ added: black background
+ added: white theme
+ added: manual select boost source - CAN or analog input (�5)
+ added: French language
+ added: Dutch language
+ added: Romanian language
+ added: calibration of the displayed speed
+ added: hot key (long press "Up" on main screen) for quick brightness change
(manual brightness mode)
+ added: coffee-break warning message
+ added: seat-belt warning icon (if supported in car)
+ added: "gauges mode" for some values
+ added: "graph mode" for some values
$ changed: oil level calculation (experimental)
$ optimize code speed and flash usage size

--------------------------------------------------------------
v2.9.4b24
$ fixed: service interval calculation for miles (US/UK units)
$ fixed: some Info-CAN problems
$ changed: little changes in algorithm of backlight mode (VW/Skoda)
+ added: boost pressure from CAN-bus (some T5 engines)

--------------------------------------------------------------
v2.9.4b23
$ fixed: mirror control for automatic transmission (B5)
$ change: units for UK and US
$ fixed: navigation show (VW and Audi)
$ fixed: some diagnostics issues
$ fixed: oil level warning for some diesel engines
+ added: bonnet check for Audi �2 if bonnet connected only to dashboard (TrInput
9)
+ added: show current speed in top of screen in navigation mode (Audi)
+ added: selection of main color
+ added: Spanish language (interface and diagnostics)
+ added: Czech language (interface only)
+ added: Italian language (interface only)
+ added: Polish language (interface only)
+ added: Slovenski language (interface only)
 + added: check Dynamic Headlight Range Control error for B5 (TrInput 12)
+ added: display off function (press and hold "down" button on main screen)
+ added: options for enable/disable navigation
+ added: options for navigation show priority
+ added: simple helper to shift up/down gear with selectable rpm (manual
transmission)

--------------------------------------------------------------
v2.9.4b22
+ change visible of gears for automatic transmission
+ add navigation show if ColorMFA installed on IC with color-FIS (�48E)
+ add navigation show for VW (testing only)
+ add 'launch control' screen (manual transmission only)
+ add torque to show on main screen
+ mirror control in parking (VW) - need additional connection for manual transm.
(rear gear)
$ changed 'bar' to 'psi' in US-units
$ optimized navigation data show (Audi)
$ optimized flash-data access
$ diagnostics optimized and fixed for some ecu
$ add ecu's in ecu-list for diagnostics (T5)
$ motor CAN-data receive optimized

--------------------------------------------------------------
changelog not present for versions below