L-Series

Sealed Rocker Switches

P ROD UC T WE BP A GE

request sample, configure part, watch video

The L-Series snap-in rocker switches offer countless

unique options including choices for ratings, colors,
illuminations and laser etched legends. These single or
double pole switches feature a broad choice of actuator
styles, colors, and lenses.

1-2 .4-20 125-250 12-24

Poles Amps VAC VDC

Typical Applications
∙ Construction ∙ Agriculture ∙ On-Highway

www.carlingtech.com 860.793.9281 [email protected]

 Design Features
LED LIGHTING SEAL PROTECTION TERMINALS
Utilize less current and are Locks out elements Available with 2 industry
not affected by vibration, such as water, dust standard termination
providing long lasting & debris. Sealed to options: .250 or .187 tabs with
illumination. Available in 3 IP67 for Above-Panel up to 12 terminal options.
standard colors. Components

LENS & LEGENDS ROLLER PIN

ACTUATOR BASE
Lens available in 2 sizes and 6 Eliminates need for
Available in rocker, Fits into industry
standard colors in either trans- lubricants, increas-
paddle, or window standard mounting
lucent or transparent materials. ing the temperature
lift styles. Several hole of 1.734 x .867 in
Numerous symbols and text range of the switch
standard color options [44.0mm x 22.0mm].
available for imprinting or laser from -40˚ C to +85˚C
also available.
etching. [-40˚ F to 185˚ F].

2.
 Tech Specs
Electrical Environmental
Contact Rating 4VA @ 24VDC (MAX) resistive Sealing IP67, for above-panel
15 amps, 125VAC components of actual switch only
10 amps, 250VAC
20 amps, 4-14VDC Corrosion Mixed Flowing Gas MFG Class III per ASTM
15 amps, 15-28VDC B-827 & B-845, Method H, with 3 years
exposure.
Dielectric Strength 1250 Volts RMS between pole to
pole 3750 Volts RMS between live Operating Temp -40°C to + 85°C
parts and accessible surfaces
Vibration 1 Per Mil-Std 202F, Method 204D
Insulation Resistance 50 Megohms Test Condition A 0.06 DA or
10G’s 10-500 Hz. Tested with
Initial Contact Resistance 10 milliohms max. @ 4 VDC VCH connector. Test criteria - No
loss of circuit during test and pre
Life Up to 100,000 cycles maintained,
and post test contact resistance.
50,000 cycles momentary circuit
and load dependent Vibration 2 Resonance search
24-50 Hz 0.40 DA
Contacts 90/10 silver-nickel, silver
50-2000 ±10 G’s peak
tin-oxide, gold
Results Horizontal Axis 3-5 G’s max.
Terminals Brass or copper/silver plate Random
3/16” (4.76mm) & 1/4” (6.3mm) 24 Hz 0.06 PSD-Gsq/Hz
Quick Connect terminations 60 Hz 0.50
standard. 100 Hz 0.50
200 Hz 0.025
2000 Hz 0.025
No loss of circuit during test; <10µ chatter.
Physical Shock Per Mil-Std 202F, Method 213B,
Test Condition K @ 30G’s. Tested with VCH
Lighted Incandescent - rated 10,000
connector. Test criteria - No loss of circuit
hours
LED - rated 100,000 hours 1/2 life during test, pre, and post test contact
(LED is internally ballasted for resistance.
voltages to 24 VDC)
Salt Spray Per Mil-Std 202F, Method 101D,
Seals Rocker, base & bracket are Test Condition A, 48 Hrs.
sealed.
Thermal Shock Per Mil-Std 202F, Method 107F,
Base Nylon 66 GF rated to 85°C with a Test Condition A, -55°C to 85°C.
flammability rating of 94V0. Test criteria - pre and post test
contact resistance.
Actuator Basic actuator structure molded
of thermoplastic polycarbonate Moisture Per Mil-Std 202F, Method 106F,
with a hard Nylon 66 Resistance Test Criteria - pre and post test
thermoplastic surface overlay. contact resistance.

Locks Acetal

Lens Polycarbonate rated at 100°C Mounting Specifications

.864
Function 2 & 3 Position Rocker Style [22.02]

Bracket Nylon Zytel

TEST CUT
1.734 HOLE IN
Connector Nylon 66 rated at 85°C. Polarized. [44.04] ACTUAL
MATERIAL

MOUNTING HOLE
Panel Thickness Range
Actuator Travel (Angular Displacement) Acceptable Panel Thickness
.030 to .156 (.76mm to 3.96mm)
2 Position 26° Recommended: .030, .062, .093, .125 and .156

3 Position 13° from center For Window Lift variant only -

Recommended Panel Thickness
.118 (3.00mm)

3. *Manufacturer reserves the right to change product specification without prior notice.
 Ordering Scheme Rocker

Sample
Part Number L 11 E 3 C H N 1 - 3 A A 45 - 1 48
Selection 1 2 3 4 5 6 7 8 9 10 11 12 13 14

1. SERIES 6,7. LAMP (SAME CODING FOR BOTH SELECTIONS)

L Selection 6: above terminals 10 & 9; Selection 7: above terminals 12
& 11
No lamp 0
2. CIRCUIT Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V
Terminal Orientation ( ) - momentary LED* Red Amber Green
SP - single pole - uses terminals 1, 2 & 4. 2VDC A L F
DP - double pole uses terminals 5, 6 & 8. 6VDC B M G
Terminals 9, 10 & 11 for lamp circuit only. 12VDC C N H
24VDC D P J
* Consult factory for “daylight bright”, blue/green and white LED options.
Typical current draw for LED is 20ma.
Position: 1 2 3
SP DP 2 & 4, 6 & 8 Connected Terminals 1 & 2, 5 & 6
11 21 ON NONE OFF 8. BRACKET COLOR 1
12 22 (ON) NONE OFF
13 23 ON NONE (OFF) Black White Gray Red
14 24 ON NONE ON Standard Bracket 1 2 3 4
15 25 ON NONE (ON) Rockerguard at Lamp 1 A B C D
16 26 ON OFF ON Rockerguard at Lamp 2 E F G H
17 27 ON OFF (ON)
18 28 (ON) OFF (ON)
CIRCUITS WITH JUMPER TERMINALS 9. ACTUATOR STYLE AND COLOR 1
30* (2,4&5), (1,6&8) OFF, OFF (1,2&8), (4,5&6)
31* 1, 2 & 5 2, 3 & 7 2, 4 & 8 Black White Gray Red Laser Etched
PROGRESSIVE CIRCUITS Rocker A B C D 3
51 3&4 2, 3 1&2 Paddle J N K M 4
52 3&4 2, 3 OFF
53 (3 & 4) 2, 3 1&2
54 (3 & 4) 2, 3 (OFF)
55 (3 & 4) 2, 3 (1 & 2) 10 & 11. LENS STYLE AND COLOR
56 (3 & 4) 2, 3 (OFF)
57 3&4 2, 3 (OFF) Lens color for LEDs must be clear, white, or match color of LED.
58* 2&4 2, 3 1&2 0 - No Actuator Z - No Lens
61 3 & 4, 7 & 8 2 & 3, 6 & 7 1 & 2, 5 & 6 Clear White Amber Green Red Blue
62 3 & 4, 7 & 8 2 & 3, 6 & 7 OFF, OFF 1 - B G M T Large Transparent
63 (3 & 4), (7 & 8) 2 & 3, 6 & 7 1 & 2, 5 & 6 - 7 C H N U Large Translucent
64 (3 & 4), (7 & 8) 2 & 3, 6 & 7 OFF, OFF 3 - D J P V Bar Transparent
65 (3 & 4), (7 & 8) 2 & 3, 6 & 7 (1 & 2), (5 & 6) - 9 E K R W Bar Translucent
66 (3 & 4), (7 & 8) 2 & 3, 6 & 7 (OFF, OFF) 5 A - - - - Laser Etched background color
67 3 & 4, 7 & 8 2 & 3, 6 & 7 (OFF, OFF)
68 2 & 4, 7 & 8 2 & 4, OFF OFF, OFF
69* 2 & 4, 1, 7 & 8 2 & 4, OFF OFF, OFF 12. LASER ETCHED, LENS OR BODY LEGEND
70 (2 & 4), (7 & 8) 2 & 4, 5 & 7 (1 & 2), (5 & 7)
71 (2&4), (7 & 8) 2 & 4, 5 & 7 1 & 2, 5 & 7 00 No legend
72 2 & 4, 7 & 8 2 & 4, 5 & 7 1 & 2, 5 & 7 For standard legends, see “Standard Legend Codes” page.
73 (2 & 4), (7 & 8) 2 & 4, OFF OFF, OFF For additional legends, please consult factory
80 2 & 4, 6 & 8 2 & 4, OFF OFF, 5 & 6
HAZARD WARNING CIRCUITS
A2 6,7 & 8, 3 & 4 NONE OFF, 1 & 2 13. LEGEND ORIENTATION
A3 6,7 & 8, 2 & 4 NONE OFF, 1 & 2
* Available with ratings 1, B, & E only. 0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1 - vertical, lamp 1 on top
3. RATING 2 2 Orientation 2 - horizontal, lamp 1 on right
3 Orientation 3 - vertical, lamp 1 on bottom
1 .4VA @ 28VDC Resistive E 15A 12V 4 Orientation 4 - vertical, lamp 1 on left
B 15A 24V G 20A 6V
C 20A 18V H 20A 3V
D 20A 12V

4. TERMINATION 2,3

1 .250 (6.4mm) TAB (QC) 1 2 3 4

3 .187 (4.7mm) TAB (QC)
Do not use silicone based lubricants to reduce terminal insertion forces during
connector assembly, as it is detrimental to function and performance.
14. ACTUATOR LENS LEGEND
5. ILLUMINATION 00 No legend
For standard legends, see “Standard Legend Codes” page.
Lamp #1:above terminals 9 & 10 end of switch.; Lamp #2 above terminals 11 & 12 For additional legends, please consult factory
end of switch. Positive (+) and negative (-) symbols apply to LED lamps only.
Lamps Illumination Type Lamp Wired to Terminals
S None Notes: Consult factory to verify horsepower rating for your particular circuit choice.
A #1 Independent 10+ 9- 1 Custom colors are available. Consult factory.
B #2 Independent 12+ 11- 2 Circuits 30, 31, 58, 69 are not available with rating codes 4, C, D, G or H.
C #1 Independent 10+ 9- 3 Termination 3 only available with rating codes 1, B, and E.
4 Not available with circuits 11-18, 51-57 and 69.
&#2 Independent 12+ 9-
D #1 Dependent 4+ 9-
E #1 Independent 10+ 9- Configure Complete Part Number > Browse Standard Parts >
&#2 Dependent 4+ 9-
F4 #1 Independent 10+ 9-
&#2 Dependent 8+ 9-
G #1 Dependent 4+ 9-
&#2 Independent 10+ 9-
H #1 Both Independent 10+ 9-
&#2 (in series)
J #1 Dependent 4+ 9-
&#2 Dependent 1+ 9-
1 #2 Hazard 6+ 10- 12-
4. 2 #1 Hazard 6+ 10- 12-
 Ordering Scheme Locking Rocker

Sample
Part Number L 11 D 1 S W C J - P M H 00 - 0
Selection 1 2 3 4 5 6 7 8 9 10 11 12 13

1. SERIES 7. LAMP
L No lamp 0
Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V
LED* Red Amber Green
2. CIRCUIT 5 2VDC A L F
6VDC B M G
Terminal Orientation ( ) - momentary 12VDC C N H
SP - single pole - uses terminals 1, 2 & 4. 24VDC D P J
DP - double pole uses terminals 5, 6 & 8. * Consult factory for “daylight bright”, blue/green and white LED options.
Terminals 9, 10 & 11 for lamp circuit only. Typical current draw for LED is 20ma.

8. BRACKET COLOR 1
Position: 1 2 3
SP DP 2 & 4, 6 & 8 Connected Terminals 1 & 2, 5 & 6 J Black
11 21 ON NONE OFF
14 24 ON NONE ON
16 26 ON OFF ON 9. ACTUATOR STYLE AND COLOR 1
17 27 ON OFF (ON)
18 28 (ON) OFF (ON) Black Red
CIRCUITS WITH JUMPER TERMINALS Locking Rocker P R
30 2 (2,4&5), (1,6&8) OFF, OFF (1,2&8), (4,5&6)
31 2 1, 2 & 5 2, 3 & 7 2, 4 & 8
PROGRESSIVE CIRCUITS 10 & 11. LENS STYLE AND COLOR
51 3&4 2, 3 1&2
52 3&4 2, 3 OFF Lens color for LEDs must be clear, white, or match color of LED.
53 (3 & 4) 2, 3 1&2 0 - No Actuator Z - No Lens
54 (3 & 4) 2, 3 (OFF) Clear White Amber Green Red Blue
55 (3 & 4) 2, 3 (1 & 2) 1 - B G M T Large Transparent
56 (3 & 4) 2, 3 (OFF) - 7 C H N U Large Translucent
57 3&4 2, 3 (OFF) 3 - D J P V Bar Transparent
58 2&4 2, 3 1&2 - 9 E K R W Bar Translucent
61 3 & 4, 7 & 8 2 & 3, 6 & 7 1 & 2, 5 & 6
62 3 & 4, 7 & 8 2 & 3, 6 & 7 OFF, OFF
63 (3 & 4), (7 & 8) 2 & 3, 6 & 7 1 & 2, 5 & 6
64 (3 & 4), (7 & 8) 2 & 3, 6 & 7 OFF, OFF 11. LOCK FUNCTION AND COLOR
65 (3 & 4), (7 & 8) 2 & 3, 6 & 7 (1 & 2), (5 & 6) Locking Position
66 (3 & 4), (7 & 8) 2 & 3, 6 & 7 (OFF, OFF) Up Down Up & Down Center 3 Lock Color
67 3 & 4, 7 & 8 2 & 3, 6 & 7 (OFF, OFF) A H R 1 Match Actuator
68 2 & 4, 7 & 8 2 & 4, OFF OFF, OFF B J S 2 Black
69 2 & 4, 1, 7 & 8 2 & 4, OFF OFF, OFF C K T 3 White
70 (2 & 4), (7 & 8) 2 & 4, 5 & 7 (1 & 2), (5 & 7) D L V 4 Red
71 (2&4), (7 & 8) 2 & 4, 5 & 7 1 & 2, 5 & 7 E M W 5 Safety Orange
72 2 & 4, 7 & 8 2 & 4, 5 & 7 1 & 2, 5 & 7
73 (2 & 4), (7 & 8) 2 & 4, OFF OFF, OFF
80 2 & 4, 6 & 8 2 & 4, OFF OFF, 5 & 6
12. LASER ETCHED, LENS OR BODY LEGEND
00 No legend
For standard legends, see “Standard Legend Codes” page.
3. RATING 2 For additional legends, please consult factory
1 .4VA @ 28VDC Resistive E 15A 12V
B 15A 24V G 20A 6V 13. LEGEND ORIENTATION
C 20A 18V H 20A 3V
D 20A 12V 0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1 - vertical, lamp 1 on top
2 Orientation 2 - horizontal, lamp 1 on right
3 Orientation 3 - vertical, lamp 1 on bottom
4. TERMINATION 4
4 Orientation 4 - vertical, lamp 1 on left
1 .250 (6.4mm) TAB (QC)
P
3 .187 (4.7mm) TAB (QC)
Do not use silicone based lubricants to reduce terminal insertion forces during P P
connector assembly, as it is detrimental to function and performance.
P

5. ILLUMINATION 1 2 3 4
Lamp #1:above terminals 9 & 10 end of switch.; Lamp #2 above terminals 11 & 12
end of switch. Positive (+) and negative (-) symbols apply to LED lamps only.
Lamps Illumination Type Lamp Wired to Terminals Notes: Consult factory to verify horsepower rating for your particular circuit choice.
S None 1 Custom colors are available. Consult factory.
B #2 Independent 12+ 11- 2 Additional lamp circuits available. Consult factory.
3 Available only with 3 position circuits.
4 Termination 3 only available with ratings 1, B and E.
5 Circuits 30, 31, 58 and 69, are not available with rating codes 4, C, D, G or H.
6. LOCK
W Lock above terminals 10 & 9.
Configure Complete Part Number > Browse Standard Parts >

5.
 Ordering Scheme Window Lift

Sample
Part Number L 70 D 1 K 0 C W - W Z A RY - 3 00
Selection 1 2 3 4 5 6 7 8 9 10 11 12 13 14

1. SERIES 6 & 7. LAMP #2

L Lamp #1: Not available on window lift switch, Use Code “0” for Selection 6
Selection 7: Above Terminals 11 & 12
No lamp 0
2. CIRCUIT 3 LED* White Amber Green Blue Volts
6 N H E 12VDC
( ) - momentary 8 P J K 24VDC
Position: 1 2 3
SP DP 2 & 4, 6 & 8 Connected Terminals 1 & 2, 5 & 6 8. BRACKET COLOR / STYLE 1
18 28 (ON) OFF (ON)
30* (2,4&5), (1,6&8) OFF, OFF (1,2&8), (4,5&6) W Black Window Lift
70* (2 & 4), (7 & 8) 2 & 4, 5 & 7 (1 & 2), (5 & 7)
* Available with ratings 1, B, & E only.
9. ACTUATOR COLOR / STYLE 1

3. RATING 3 W Black Window Lift

1 0.4VA 28V DC Resistive

B 15A 24V 10 & 11. LASER ETCHED BACKGROUND COLOR
D 20A 12V
E 15A 12V Z Blank
5 Clear
A White
4. TERMINATION 3

1 .250 (6.4mm) TAB (QC) 12. LEGEND #1 2

3 .187 (4.7mm) TAB (QC)
00 No legend
For standard legends, see “Standard Legend Codes” page.
For additional legends, please consult factory
5. ILLUMINATION
Positive (+) and negative (-) symbols apply to LED lamps only.
Lamps Illumination Type Lamp Wired to Terminals 13. LEGEND ORIENTATION
S None 0 No legend
B #2 Independent 12+ 11- 1 Orientation 1
K #2 Independent 10+ 9- 2 Orientation 2
3 Orientation 3
4 Orientation 4
Notes:
1 Custom colors are available. Consult factory.
2 Legend 1 over lamp 2 location.
3 Circuit 30 & any combination of terminations code 1 or 3 can not be used with
rating code D. Termination code 3 can only be used with rating codes 1, B & E.
4 Legend 2 over lamp 1 location.

1 2 3 4
Configure Complete Part Number > Browse Standard Parts >

14. LEGEND #2 4

00 No legend
For standard legends, see “Standard Legend Codes” page.
For additional legends, please consult factory

6. COS-0119 Rev:E
*Manufacturer reserves the right to change product specification without prior notice.
 Dimensional Specs
inches [millimeters]

L-SERIES L-SERIES
SHOWN WITH LASER ETCHED SHOWN WITH ROCKER GUARD
ACTUATOR

1.970
[50.04]

1.020
[25.91]

.400 .435
[10.16] [10.16]

1.450
[36.83]

.855
[21.72]

L-SERIES L-SERIES L-SERIES

SHOWN WITH LARGE LENS SHOWN WITH BAR LENS, LOCK SHOWN WITH LASER ETCHED
AND PADDLE ACTUATOR AND CONNECTOR WINDOW LIFT ACTUATOR

1.970
1.970 [50.04]
[50.04]

1.020
[25.91] 1.020
[25.91]

.453 .760
[11.51] [19.3]
.400
[10.16]
1.450
12 4 3 2 1 10 [36.83]
2.380
[60.45]

12 4 3 2 1 10 .855
[21.72]

Connector L-SERIES
CONNECTOR Hole Plug L-SERIES
HOLE PLUG
LC1-01 BLACK .250 TAB CONNECTOR (PACKARD 630 SERIES) LH1 REMOVABLE HOLE PLUG
1.970 WITH NON-SERRATED WINGS
LC2-01 BLACK .187 TAB CONNECTOR (PACKARD 480 SERIES)
LC3-01 BLACK .250 TAB CONNECTOR (AMP ONLY) [50.04] LH2 HOLE PLUG WITH
SERRATED WINGS

1.020
[25.91]

.500
[12.70]
1.325
.920 [33.66] .300
[23.37] [7.62]

1.710 .855
.790
[43.43] [21.72]
[20.07]

7.
 Dimensional Specs
inches [millimeters]

+.008
-.000 +.008
.984 -.000
2.020
[25.00]
[51.31]
R. 093 MAX TYP R. 093 MAX TYP

MOUNTING PANEL
+.008 TEST FOR ADDITIONAL UNITS< ADD 1.03 [26.2] PER UNIT.
TEST -.000 +.008
CUT 1.900 CUT -.000 FOR MORE THAN 2 L-SERIES SWITCHES, ADD MIDDLE
HOLE IN HOLE IN 1.900 SECTION. AVAILABLE IN PANEL THICKNESSES LISTED
[48.26]
ACTUAL ACTUAL [48.26] BELOW> CONSULT FACTORY
MATERIAL MATERIAL DIMENSIONS: LME 2.02 [51.3mm] PLUS NUMBER OF
CENTER BEZELS (LMM) X 1.034 [26.26mm]
MOUNTING PANEL THICKNESS
LMS MOUNTING PANEL
.062 .093 .125 .156
MOUNTING PANEL OPENING
[1.57] [2.36] [3.17] [3.96]
HOLE (2) UNITS

2.300 2.300 1.990 2.300

[58.42] [58.42] [50.55] [58.42]

1.187 1.030 1.340

[30.15] [26.16] [34.04]
LME MOUNTING PANEL LMM MOUNTING PANEL LMS
END MIDDLE MOUNTING PANEL

1.700 1.030
[43.18] [26.16]
1.030 .670
[26.16] [17.02]

2.300 2.300
[58.42] [58.42]

3.400 4.430
[86.36] [112.52]
LM3 MOUNTING PANEL LM4 MOUNTING PANEL
PANEL OPENING SIZE: 1.90 x 3.06 [48.3mm x 77.7mm] PANEL OPENING SIZE: 1.90 x 4.09 [48.3mm x 103.9mm]

1.030
[26.16]
.670
[17.02]

2.300
[58.42]

6.490
[164.85]
LM6 MOUNTING PANEL
PANEL OPENING SIZE: 1.90 x 6.15 [48.3mm x 156.2mm]

8.
 Circuit Diagrams

CIRCUIT CIRCUIT CIRCUIT

CODE CIRCUIT DIAGRAM CODE CIRCUIT DIAGRAM CODE CIRCUIT DIAGRAM
4 4 5 1 3

11 22 51

2 2 6 2 4
4 4 5 3

12 23 52

2 2 6 2 4

4 1 4 5 8 1 3

13 24 53

2 2 6 2 4

1 4 1 4 5 8 3

14 25 54

2 2 6 2 4

1 4 1 4 5 8 1 3

15 26 55

2 2 6 2 4

1 4 1 4 5 8 3

16 27 56

2 2 6 2 4

1 4 1 4 5 8 3

17 28 57

2 2 6 2 4
1 4 1 4 5 8 1 3 4

18 30 58

2 2 6 2

4 8 1 3 4 5 7 8 1 3 5 7

21 31 61

2 6 2 2 4 6 8

Circuit Diagrams continued on next page

9.
 Circuit Diagrams
CIRCUIT CIRCUIT
CODE CIRCUIT DIAGRAM CODE CIRCUIT DIAGRAM
3 7 1 4 5 8

62 71

2 4 6 8 2 7
1 3 5 7 1 4 5 8

63 72

2 4 6 8 2 7

3 7 4 8

64 73

2 4 6 8 2 7
1 3 5 7 4 5 8

65 80

2 4 6 8 2 6

3 7 4 5 8 1

66 81

2 4 6 8 2 6
3 7 1 4 5 8

67 82

2 4 6 8 3 6

4 8 1 2 3 4 7 8

68 A2
INTERNAL
CONNECTION
2 7 6

4 8 1 1 4 7 8

69 A3
INTERNAL
CONNECTION
2 7 2 6

1 4 5 8

70

2 7

10.
 Lamp Circuit Diagrams
LAMP CIRCUIT LAMP CIRCUIT
CODE CIRCUIT DIAGRAM CODE CIRCUIT DIAGRAM
-9 -9 +1 +4

A J
1 1 2

+10
-11 -12

B 1 INTERNAL
CONNECTION 2
2

+12 +10
-9 -12

C 2 1
INTERNAL
CONNECTION
1 2

+10
+10 +12
(–)9
-9 +4

D K 1
1

(+)10

-9 +4

E
LEGEND
1 2

SYMBOL DEFINITION
+10
-9 +8 TERMINAL LOCATION

LAMP LOCATION

F 1 2 MAINTAINED CIRCUIT

MOMENTARY CIRCUIT

+10 INTERNAL CONNECTION

-9 +4 (JUMPER TERMINAL)

2 POSITION CONNECTION
G 1 2
P3 P1
2 POSITION
+10
-9
P2 P1
P3
3 POSITION
H 1 2

+10

11.
 Standard Legend Codes

YK UA UB US UV UW UX UY MP MR PX MS MT

VU MW NZ NX NY YM VW PS PW PZ WG WM RN

RP YG TX VD VE VF VG SH SM SN SP SR SY

WY WZ UH UJ PD PE PF VC VJ UF UG MU TN

NS PB SE VZ YE NN RW PU WA YN UE NM RJ

NR YD TL VR SL VA UC VN PK VY UZ RH NU

NV RB RC RK RL MZ RG WS WT UD UR WD TY
WATER
PUMP

PA UK WR UU UT YR PM VV WB TB TC TD TE

MY PV TA TZ WC PT PN PH RA TU TT YL SK

VS UL UM WK TS VT WL VP YJ PJ RY UP NW

NP RE RF PP PR TV PC YT YU PL WJ MV RR

TK RT SZ VX WF WH PG SJ YA YB RM TM RD

RS UN TP TR NT MX YC TW TJ YF TH TF TG

YS YH SX RZ YP WN WP WW WX SA SB SC SD

ST SU WU WV SV SW VB VH VK VL VM WE SF

SG SS RU RV RX

CLA-0146 Rev: A
12. ISO compliant symbols. Consult factory for custom legends.
 Authorized Sales Representatives and Distributors
Click on a region of the map below to find your local representatives and distributors
or visit www.carlingtech.com/findarep.

CANADA
EUROPE

USA
MIDDLE
EAST
MEXICO
AFRICA ASIA-PACIFIC
OCEANIA

SOUTH
AMERICA

About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and
electronic switches and assemblies, circuit breakers, electronic controls, power
distribution units, and multiplexed power distribution systems. With six ISO9001 and
IATF16949 registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than
manufacture electrical components, they engineer powerful solutions! To learn more
about Carling please visit www.carlingtech.com/company-profile.

To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications.

© Carling Technologies, Inc.

13. Carling is a registered trademark of Carling Technologies, Inc. in the U.S. and other countries.
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Carling Technologies:

L1113S001-AZZ00-000 L11B1AJ01-AJZ00-000 L11B1S001-AZZ00-000 L11B3D801-A1Z00-000 L11B3S001-

AZZ00-000 L11D1AH01-AGZ00-000 L11D1AN01-A1Z00-000 L11D1S001-AZZ00-000 L12D1S001-AZZ00-000
L16D1S001-AZZ00-000 L28D1S001-AZZ00-000 L11D1EHN1-A7900-000 L28D1EHN1-A7900-000 LC1-01 LH1-01
L24D1S001-AZZ00-000 LC2-01 LC3-01 LME-01 LM3-01 L14D1S001-AZZ00-000 L21D1S001-AZZ00-000
L16B1S001-AZZ00-000 L14B1S001-AZZ00-000 L12E3S001-AZZ00-000 L14D1AC01-AMZ00-000 L18D1S001-
AZZ00-000 L26D1CHH1-A1100-000 L11D1DC01-ANZ00-000 L12B1S001-AZZ00-000 L26D1S001-AZZ00-000
L28E3S001-AZZ00-000 L58E1S001-AZZ00-000 L18D1CCC1-AMM00-000 L12E3A601-AGZ00-000 L16E3S001-
AZZ00-000 L24D1AH01-AHZ00-000 L30B3S001-AZZ00-000 L26D1C661-AHH00-000 L72E3S001-AZZ00-000
L28D1AN01-A1Z00-000 L28B3S001-AZZ11-000 L28B3S001-AZZ00-000 L64E3S001-AZZ00-000 L12E1A601-
AGZ00-000 L28B1S001-AZZ00-000 L52E3S001-AZZ00-000 L1813S001-AZZ00-000 L12E3A601-A7Z00-000
L30E1S001-AZZ00-000 L11E3A601-A7Z00-000 L21E3E661-ACH00-000 L24B1S001-AZZ00-000 L22E3S001-AZZ00-
000 L14E1C661-A7700-000 L11E1C661-A7700-000 L21B3C881-A1100-000 L15B1S001-AZZ00-000 L16E1D601-
AGZ00-000 L28E1C661-A7700-000 L18E3S001-AZZ00-000 L18B3S001-AZZ00-000 L62B1S001-AZZ00-000
L16E1C661-A7700-000 L28D1CNN1-00000-000 VH5 CONTURA V HOLE PLUG NO SERRATION VH5-08 CONTURA
V HOLE PLUG NO SER VH6 CONTURA V HOLE PLUG W/SERRATIONS LMS-01 SNAP-IN BRKT SINGLE BK L
CONNECTOR LD .250 VH1 PANEL PLUG BLACK NO SERRATIONS NN312XX-1XX-XSL PANEL MOUNT MP-311
PANEL MOUNT MP-321 PANEL PLUG GGP GLOSS BK PANEL PLUG GMP MATTE BK PANEL PLUG GMP MATTE
WH VH2 PANEL PLUG BLACK W/ SERRATIONS VH3 HOLE PLUG BLACK NO SERRATIONS VH3 HOLE PLUG
WHITE NO SERRATION VH4 HOLE PLUG BLACK W/ SERRATIONS VME-XX SNAP-IN BRACKET-END COOL
GRAY NN312XX-1XX-XCL L70D1CHH1-3AA4D-2AV L22D1S001-AZZ00-000 L16D1CHN1-A7900-00 VMM-02
SNAP-IN BRACKET-CENTER WHITE L11B1AJ01-AJZRZ-100 RCV-00005081 L11B024620221DG 809-70194-001
L13B1246102DAPG L11B024630221DG RCV-00005080 L32B02462046AC3 L22B0244504GACG
L31B022620H22D3 L32B022620H2BCG RCV-00005082 L22B1244504GACG