Create Bootable Flash Drive using RUFUS

Windows Server OS and Windows 7 OS

Then reformat your PC.

While you are waiting to Finish Installing OS

Setup your cable UTP, PATCH PANEL, I/O, RJ45.

After you finished Installing OS on both PC,

Re-name your computer

Windows Server OS
Computer Name: SERVER

Windows 7 OS
Computer Name: USER or CLIENT or PC1 or Win7

Install Software:
Driver Pack
Google Chrome
Windows Office – Word
Exel
Powerpoint

Other Software
If needed - WINRAR
Adobe Reader

First, you need to reset your router button and

setup your IP Address Depend on IP Classes
Before you proceed STEP 1
1
STEP 1.
Manage Sharing Settings on both Windows
Server PC and Windows 7 PC

Click -> PC Icon Click -> Open Network and Sharing Center

Click -> Change Advanced Sharing Settings both Windows Server PC and Windows 7 PC

Under the -> Home or Network TAB.

Select -> Turn on network discovery

Select -> Turn on file and printer sharing
Select -> Turn on sharing so anyone with network access can read and write files in the public
folder
Select -> Turn off password protected sharing

Under the -> Guest or Public (current profile) Tab.

Select -> Turn on network discovery

Select -> Turn on file and printer sharing
Select -> Turn on sharing so anyone with network access can read and write files in the public
folder
Select -> Turn off password protected sharing

Under the All networks Tab. (Windows 7 Set-up)

Select -> Turn on sharing so anyone with network access can read and write files in the public
folder
Select -> Use 128-bit encryption to help protect file sharing connections (recommended)
(Windows 7 Set-up)

Very important is
Select -> Turn off password protected sharing
Click -> Save changes Box
2
STEP 2.
TURN OFF FIREWALL SETUP BOTH WINDOWS
SERVER AND WINDOWS 7

Click -> PC Icon Click -> Open Network and Sharing Center

Click -> Window Firewall Click Turn Windows Firewall on or off

Under the -> Home or Work (Private) network location settings

Select -> Turn off windows Firewall (not recommended)

Under the -> Public network location settings

Select -> Turn off Windows Firewall (not recommended)

Then Click -> OK

3
After you setup Advanced Sharing and Firewall Settings,
you need to connect both Windows Server PC and
Windows 7 PC Peer to Peer connection. Then Setup
PRINTER to your PC, after the peer to peer connection,
then print.

STEP 3.
SETUP YOUR WINDOWS SERVER PC TO
STATIC CONNECTION
Click -> PC Icon Click -> Open Network and Sharing Center

Click -> Change adapter settings Double Click -> Local Area Connection then Click
Properties or Right Click -> Local Area Connection then
Click -> Properties.

Uncheck -> Internet Protocol Version 6 (TCP/IPv6) if active

Double Click -> Internet Protocol Version 4 (TCP/IPv4) or Click -> Internet Protocol Version
(TCP/IPv4) Then Click -> Properties.

4
Input the IP Address in the BOX depend on your Router Setup IP Address classes.

EXAMPLE:

Use the following IP Address:

192.168.100.20
255.255.255.0
192.168.100.1
Use the following DNS server Address:
192.168.100.20

In Windows 7 PC, Always Set-up to Dynamic Selection (Obtain an

IP address automatically)

5
 WINDOWS SERVER ADD ROLES & INSTALLING

Click -> Start -> Administrative Tools -> Server Manager

Click -> Roles -> Add Roles

Click -> Next Button

6
SELECT SERVER ROLES AND INSTALL ONE BY ONE

 Active Directory Domain Services

 DHCP
 DNS Server
 File Services

STEP 1. ACTIVE DIRECTORY DOMAIN SERVICE INSTALLATION

Highlight and click the box -> Active Directory Domain Service

Click -> Add Required Features Box

7
Click -> Next Click -> Next

Then Click Install and wait the installation to complete -> Then Click Close Box

STEP 2. DNS SERVER INSTALLATION

Click -> Active Directory Domain Services

Click -> Run the Active Directory Domain Services Installation Wizard (dcpromo.exe)

Click -> Next Click -> Next

8
Click -> white circle (Create a new domain in a new forest) Then Click -> Next

In the Active Directory Domain Services Installation Wizard box

Type name with the following Example then Click -> Next

EXAMPLE: TESDA.Local
www.atec.com
www.user.org
user.com
user.net
user.cc
user.ph

Click -> Arrow down in the box and choice (Windows Server 2008 R2) The Click -> Next

9
Wait to Examining DNS configuration Loading…

Click -> Next Click -> Yes

If the computer Appear this massage

Click ->Yes, the computer will use an IP Address Automatically assigned by a DHCP server
(not recommended).

This option is depending on your PC set-up on your DNS Server IP Address

Click -> Next Create your Password on your Domain Account

SAMPLE:
Atec123

10
Click -> Next Click the white box -> Reboot on completion

Wait until the Windows Server PC restart

automatically

If you forget to check the small white box, you need to restart your Windows Server PC
Manually.
After Booting your PC, enter your password you create before to your administrator account.

STEP 3. DHCP INSTALLATION

Click -> Start -> Administrative Tools -> Server Manager

Click -> Roles -> Add Roles

11
Click -> Next

Highlight and click the box -> DHCP Server Click -> Next

Click -> Next Double check the IP Address if correct then Click – Next

12
Delete the IP address 127.0.0.1 then write the correct IP Address 192.168.100.20

Before you click the Validate button, you need to edit your IPv4 Setup. Go to STEP 3. SETUP
YOUR WINDOWS SERVER PC TO STATIC CONNECTION on Page 4 -5

After you edit the IPv4 Setup Click -> Validate box then Click -> Next

13
Click -> Next Click -> Add…

CREATE SCOPE NAME

Example: Files Scope
Input IP Address to Starting IP Address and Ending IP Address, make sure your IP Address are
not conflict.
IP Address Sample: Starting to 192.168.100.8 / Ending to 192.168.100.19

Click -> OK

14
Highlight the Scope Name with IP Address
Make sure your DHCP Scopes are Activate then Click -> Next

Click the white circle -> Disable DHCPv6 stateless mode for this server then Click -> Next

Make sure the circle of (Use current credentials) is on then Click -> Next

15
Click -> Install and wait to finish the installation process.

Click -> Close after

Successfully installed

STEP 4. FILE SERVICE INSTALLATION

If the FILE SERVICE automatically installed then let’s

proceed to STEP. 5, Page 20

16
Click -> Start -> Administrative Tools -> Server Manager

Click -> Roles -> Add Roles

Click -> Next

17
SELECT ROLE SERVICES TAB
Check the box -> File Server Resource Manager
Check the box -> Windows Server 2003 File Services
Click -> Next

Check the box -> New Volume (D:) then Click -> Next

18
Click -> Next

Check The Box -> New Volume (D:) then Click -> Next

Click -> Install and wait the installation process.

Click -> Close

19
STEP 5.
Click -> File Service

Scroll Down and find the Add Role Services Then Click it.

SAME PROCEEDURE ON SELECT ROLL SERVICES TAB

Page 18 - 19

20
 Create Active Directory User and Computer
Click –> Start -> Administrative Tools then Click -> Active Directory User and Computers

TESDA.Local
Right Click -> New -> Organizational Unit

Create Name then Click OK

EXAMPLE: HR Department

21
In the Name you create Right Click then -> New
Click -> User

Type your Name, Full name, User logon name:

Click -> Next

EXAMPLE:
Admin1

Uncheck -> Check ->

User must change password at next logon User cannot change password
Password never expires
Password: Atec123
Confirm password: Atec123
Click -> Next

22
Click -> Finish

Create Group Policy Management

Click -> Start -> Administrative Tools then Click -> Group Policy Management

Click -> + sign Forest: TESDA.Local

23
Click -> + sign Domains

Right Click -> TESDA.Local

Click -> Create a GPO in this domain, and Link it here…

Create Name you want.

Example: HR Files Click -> OK after you Change the Name

24
Click -> + sign TESDA.Local

HR Files Right Click Then Click -> Edit

25
Double Click -> User Configuration

Double Click -> Polices

Double Click -> Windows Settings

26
Double Click -> Folder Redirection

Right Click -> Desktop Folder then Click -> Properties

Click the small arrow down then Choose -> Basic – Redirect everyone’s folder to the same
location

27
Copy the Root path:
To do this Follow the STEP 1

STEP 1. Create a Folder in the Drive (D:)

Go to Start then Click -> Computer

Go to Drive (D:)

28
Create Folder inside the Drive (D:)
Right Click -> New
then Click -> Folder

Rename the folder

Example: HR Department

Right Click the folder then Click -> Properties

29
Click -> Sharing Tab
Click -> Advanced Sharing

Check the white box then Click -> Permissions

Click -> Remove then Click -> Add

30
Type -> Domain Users Then Click -> Check Names
If no conflict on the name Click -> OK

Check the box -> Full Control

Click -> Apply
Click -> OK

Click -> Caching

Click -> white circle
No Files programs from the shared folder
are available offline. Then Click -> OK

31
Click -> Apply
Click -> OK

Copy the Network Path:

\\SERVER\HR Department

Paste to the Root Path: Box

32
Click -> Settings Tab Uncheck -> Grant the user exclusive rights to Desktop
Click -> Apply then Click -> OK

Click -> Yes Click -> OK

Create File Server Resource Manager

Click -> Start -> Administrative Tools Click -> File Server Resource Manager

33
Double Click -> File Screening Management

Double Click -> File Screens

Click -> Create File Screening

34
Click -> Browse… Click -> New Volume (D:)

Click the Folder inside the New Volume (D:)

Then Click -> OK Click -> Create

Now you are ready to open your client account to Windows 7 PC

35
 SETUP YOUR CLIENT ACCOUT TO WINDOWS 7 PC

Click -> Start -> Computer Right Click on the open Area then Properties

Click -> Change settings Click -> Change

36
Click -> Domain
Write your Domain Name on your SERVER
Click -> OK

Type your username and password

Username: Administrator
Password: Atec123
Click -> OK Wait the loading process then Click -> OK

37
Click -> OK Click -> Close

Click -> Restart Now then wait to re-boot your PC

If you have a problem to your Domain Account and appear this message.
Click -> OK

Proceed to Page 39 – 40 and follow Instruction

If there is no problem let’s proceed to Page 41

38
STEP 1.
Unplug your 12v adaptor on your Router for 30secs. Or 1 min. then back again.

STEP 2.
Go to your Windows Server PC then Press win+R to your keyboard, Type CMD then enter

Type: ipconfig to your Command prompt then Enter

Check your IPv4 IP Address

39
Input the IP Address 192.168.100.20 to your Window 7 IPv4 setup.
Then Click -> OK
Click -> OK

Let’s Try again

Click -> OK

If the error still in your Domain Account

you need to troubleshoot your connection one by one.
Check your IPv4 on your Windows 7 or Windows Server if the setup is dynamic or Static.
Check your IP address if not conflict.
Check your Server Domain Account setup
Check your UTP cable RJ45 on the back of your PC if the light is blinking.
Check your Router Power on.
Check your I/O Connection.
Check your Patch Panel Connection.

40
On your keyboard press CTRL + ALT + DELETE

Click -> Switch User

Click -> Other User

41
Type your Domain Account you create on your Server
Username: Admin1
Password: Atec123
Click the arrow

REMOTE DESKTOP
On your client Windows 7 PC
Click -> Start then type remote Click -> Allow remote access to your computer

42
Type your username and password
Username: Administrator
Password: Atec123
Click -> OK

Click ->
Allow connection from computer running any version of Remote Desktop (less secure)
Click -> Apply and OK

Same procedure to Windows Server PC

43
Windows Server Remote setup same on page 42 - 43
Click ->
Allow connection from computer running any version of Remote Desktop (less secure)
Click -> OK

Click -> Apply and OK

Now let’s try to Remote your Window 7 Client

Using your Windows Server PC
Click -> Start then type remote
Click -> Remote Desktop Connection

Type the IP Address on your Client Windows 7 PC

Proceed to Page 45

44
Press win+R to your Keyboard on Windows 7 PC then Type CMD

Type: ipconfig on Command Prompt then enter

Check your IPv4 Address on your Command Prompt

45
Go back to Windows Server PC
Type the IP Address 192.168.100.6 on your client windows 7 PC
Click -> Connect

In the first tab

Type the password
password: Atec123

Click the box then Click -> Yes

46
Click -> Yes Wait to connect

Now let’s try to Remote your Window Server

Using your Windows 7 Client PC
Click -> Start the type remote
Click -> Remote Desktop Connection

Same procedure on page 45

Windows Server Command Prompt

IPv4 Address 192.168.100.20

47
Type the IP Address of your Windows Server PC
Click -> Connect

Click the small box the Click -> Yes

Click the second Tab then type username and password

Username: Administrator
Password: Atec123
Click -> OK Wait to connect

48
 BACK-UP AND RESTORE
CORE 4

STEP 1. SETUP BACKUP IN WINDOWS 7 CLIENT PC

Click -> Start then Click -> Computer

Double click -> (D:)

Create a Folder inside the Drive (D:)

Right Click then Click -> New -> Folder

Re-name the Folder you create

Example: HR Files

49
Inside the HR Files Folder, input any files and Re-name

Go to your Windows Server PC

Click -> Start then Click -> Computer Double click -> Drive (D:)

Create New Folder then Re-name to Backup Folder

50
Right Click the Backup Files
Click -> Properties Click -> Sharing Tab
Click -> Advanced Sharing…

Check the small box -> Share this folder Click - Remove
Click -> Permissions Click – Add…

Type -> Domain Users then Click -> Check Names then Click -> OK

51
Click -> Full Control
Click -> Apply
Click -> OK Click -> Catching

Click -> No files or programs from the shared folder are available offline
Click -> OK
Click – Apply and OK

Go to Windows 7 Client PC
Click -> Start then type backup Click-> Set up backup
Click -> Backup and Restore

52
Type username and password
Username: Administrator
Password: Atec123
Click -> Yes Wait the Starting Windows Backup

Click -> Save on a network…

Type the Network Path on your Backup Folder in your Windows Server

Type: \\SERVER\Backup Folder

53
After you select the correct Network Path, type username and password
Username: Administrator
Password: Atec123
Click -> OK

Click -> \\SERVER\Backup Folder

Click -> Next

54
Click -> Let me choose
Click -> Next

You need to uncheck all the box, depend on the actual assessment needed

55
Click -> New Volume (D:)
Check the box of HR Files you Create on Windows 7 Drive (D:)
Click -> Next

Windows 7 Drive (D:)

Click -> Save settings and run backup

Wait the backup progress… DONE…

56
Go to Window Server Drive (D:) to check the backup file are good.
Click -> Drive (D:)
Double click -> Backup Folder

Double click -> Folder Double click -> Folder

Double click -> Folder Double click -> Backup files 1

Double click -> Folder D Double click -> HR Files

57
This is the previous files you create inside the HR Files Folder
in Windows 7 Client PC Drive (D:)

STEP 2. TRY TO RESTORE YOUR BACKUP FILES

Click -> Start then Click -> Computer

Double click -> Drive (D:)

58
Right Click -> HR Files Folder
Click -> Delete Click -> Yes

This folder is shared with other people

If this message appears on your delete process

Click -> Continue

You need to type your username and password

Username: Administrator
Password: Atec123
Click -> Yes

Right Click the Recycle Bin

Click -> Empty Recycle Bin Click -> Yes

59
Click -> Start then type restore

Click -> Restore my files

Click -> Browse for folder Double Click -> Backup of D:

Click -> HR Files you delete Click -> HR Files

Click -> Add Folder Click -> Next

60
Choose -> In the original location
Click -> Restore Click -> Finish

GO TO WINDOWS 7 CLIENT PC AND CHECK THE FILE

IF RESTORED ON DRIVE (D:)
Click-> Start then Click -> Computer

Double Click -> Drive (D:)

If you see the HR Files you delete before, CONGRATS you are a great STUDENT

61