Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    HR-300-Product-Data-Sheet - NZ

    Uploaded by

    vvnmech

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    HR-300-Product-Data-Sheet - NZ

    Uploaded by

    vvnmech
    17 views1 page

    Original Title

    HR-300-Product-Data-Sheet_ NZ

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views1 page

    HR-300-Product-Data-Sheet - NZ

    Uploaded by

    vvnmech

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    HR

    Data Sheet

    300, 300L0, 300L15


    Hot-Rolled – Plate
    Revision: 20/07/2016

    GENERAL DESCRIPTION
    Hot rolled steel plate with a nominal minimum yield strength as specified in the table below, with good ductility.
    Impact grades are available if required.

    APPLICATIONS
     Structural applications

    STANDARDS
     AS/NZ 3678:2016
     AS/NZS 1365:1996
    10 – 32mm 32 – 50mm 10 – 32mm 32 – 50mm
    [1]
    CHEMICAL COMPOSITION TYPICAL (wt %) EXPECTED MAXIMUM (wt %)
    Carbon (C) 0.16 0.15 0.22 0.22
    Silicon (Si) 0.24 0.250 0.35 0.35
    Manganese (Mn) 1.30 1.30 1.70 1.70
    Sulphur (S) 0.017 0.016 0.030 0.030
    Phosphorus (P) 0.020 0.012 0.040 0.040
    Vanadium (V ) 0.016 0.035 0.030 0.045
    [1]
    Values shown refer to relevant Australian/ New Zealand standard unless stated otherwise

    10.0 – 12.0mm 12.0 – 20.0mm 20.0 – 50.0mm 10.0 – 12.0mm 12.0 – 20.0mm 20.0 – 50.0mm
    MECHANICAL PROPERTIES TYPICAL EXPECTED MINIMUM
    Yield strength, MPa 350 340 320 310 300 280
    Tensile strength, MPa 510 500 480 430 430 430
    Elongation
    32 28 27 21 21 21
    % on Lo=5.65mm√So
    Material should be used promptly (within 6 months) to avoid the possibility of storage related corrosion and degradation. Mechanical properties
    are guaranteed at ambient/room temperatures. Please consult technical representatives at New Zealand Steel for high/low temperature use.

    FABRICATING PERFORMANCE
    1 = Limited 5 = Excellent DIMENSION CAPABILITIES
    METHOD RATING THICKNESS (mm) WIDTH (mm)

    Bending 3 10.00 – 50.00 730 – 1540


    Welding 4 Other dimensional combinations may be available by enquiry.

    STANDARD PLATE SIZE IMPACT PROPERTIES (AS/NZS 3678 L15)


    GUARANTEED MINIMUM
    WIDTH (mm) LENGTH (mm) AT TEMPERATURE
    (average 3 tests)
    2400 27 Joules - 15°C
    1220 – 1250
    3600
    6000
    1510 - 1550
    12000

    New Zealand Steel Limited


    Auckland
    Tel. +64 9 375 8999 www.nzsteel.co.nz
    Fax. +64 9 375 8213 [email protected]
    A BlueScope Steel Company Copyright © 2016 New Zealand Steel Limited

    You might also like