Reach Type Stand-up Model

1.0-3.0 ton
 State of the Art
“Second To None”

01 02
 Operator friendly steering wheel
Soft Landing System and levers
The mast incorporates a soft The steering wheel and the levers are oriented to ensure
landing mechanism that the comfortable posture during operation.

FRB-9 boasts the ease-of-use and safety reduces the lowering speed
just before the forks contact
the ground. This greatly

features that enable the operator to minimizes the shock and

impact noise (when unladen).

concentrate on the work at hand.

Load handling Steering wheel Levers

The result is increased work efficiency. and traveling interlock system Large waist pad for
Thanks to the interlock system, the display issues a
reduced operator fatigue
Comfort & Safety warning when the operator is out of the compartment or not
in the correct position for traveling or hydraulic operations. The enlarged waist pad
In addition, all operations will be suspended even if the key features soft touch materials
Simply by grasping the grip and setting foot on the lowered step, switch is turned on while any lever is activated. and helps the operator
you’ll realize just how user-friendly FRB-9 has become. maintain posture.

What’s more, the operator compartment of FRB-9 has been

exhaustively designed to increase the operator’s work efficiency.
The excellent forward visibility remains, while the operator can Rigid frame for greater durability
enjoy enhanced support resulting from a thorough rethink of the Waist pad
The monocoque frame has been introduced to increase
steering wheel angle and the arrangement of the operating levers. durability and enhance strength with a cast iron rear
bumper which also ensures ample impact resistance.
Antiroll back system
After temporarily stopping on an incline and releasing the
brake, you will descend only at very slow speed until you
apply the accelerator and easily continue on your way.

3
1
2 Uphill slope

4 5

Pedal with a presence switch Glove compartment 1 Main plate 2 Side frame

The right side of the driver’s platform incorporates an and flat top panel for documents 3 Cast steel cover for load wheel

independent pedal with a presence switch. This ensures 4 Straddle leg 5 Reinforced link support Maintains speed of about 1 km/h if you release the
Equipped with a glove compartment and a flat top panel 6 Cast iron rear bumper
you can operate while maintaining a safe and stable brakes with the accelerator off (“Anti-rollback” feature).
that accepts magnets for simplified document storage.
posture, as this innovation prevents the right heel from
protruding from the compartment. Downhill slope
In addition, reducing the step height to 265 mm*
contributes to easier operator entry while maintaining
conventionally sized caster wheels. *1.0t and 1.5t models Operator friendly steering wheel
and levers
New pedal with
Magnet-compatible flat top panel
presence switch The steering wheel and the
levers are oriented to ensure
the comfortable posture
Brake pedal
during operation.
Maintains a constant safe speed (by suppressing
(deadman type,releases
acceleration on slope descent).
when depressed)
(Travel backward when laden.)
Glove compartment Note: Deadman-type brakes are applied when the pedal is released.

03 04
 The eco-friendly Easily switch from the
standard modes to Eco Mode Auto power-off system

performance
Depending on the work environment, the operator can This system automatically conducts
directly switch to Eco Mode from any of the three operation to shut off the main power to save 15min
modes: P (Powerful), N (Normal) and C (Customize). the battery power when the truck is POWER OFF
not operated more than 15 minutes

of FRB-9 Series has evolved. P P ECO

even if the main key switch is “ON”.
The hour recording meter of
operation also halts to automatically
record the actual operation time for
Eco & Advanced management supervision on the
truck operation.

This vehicle features innovations such as the Eco Switch and N N ECO

customizable operation feeling. Simply switch the mode to vary between

powerful operation and eco mode. Thanks to this ability to accommodate
varying work environments, FRB-9 Series offers expanded potential. C C ECO

Operation characteristics customizing system

The Eco Switch contributes Understand vehicle
It provides flexibility in setting the operation characteristics
to increased energy-efficiency status at a glance to match the operator’s skill
In addition to P (Powerful), N (Normal) and C (Customize) All information is displayed for easy understanding: Through adjustments to the acceleration force, response, and accelerator Acceleration force
modes, FRB-9 Series features Eco Setting. In Eco Mode, remaining battery power, travel speed, hour meter, turtle lever characteristics, the vehicle’s response to travel and hydraulic inputs Travel : 16 levels
daily electricity consumption is cut by 15% by controlling mode icon. This allows for easy management of vehicle can be adjusted in many ways to accommodate specific usage Lift / Reach : 9 levels
maximum performance such as travel speed and lift status. Moreover, the display can be inverted to match requirements and the operator’s skill.
speed. Use the Eco Switch to reduce your ongoing personal preferences or the work environment. Because adjustments are made through the management screen, the user
electricity consumption when maximum performance is not or service technician can quickly adjust vehicle response settings.
required.

Negative display (Normal)

Accelerator lever Response

characteristics Travel : 16 levels
Eco Switch Travel : 16 levels Lift / Reach : 9 levels

Positive display (Inverted)

Acceleration force Response Accelerator lever characteristics

Easy-to-read display Velocity Powerful (C) Powerful (P) Normal (N) Velocity Fast’ (C) Fast (P) Normal (N) Torque
The transmissive LCD exhibits Normal (P)
Normal (N)
clear contrast that makes it easier Coarse
adjustment
to read and less likely to be Slow (C)

affected by sunlight when used

outdoors. What’s more, the text is Adjustment range Adjustment range
Adjustment range
larger and the full dot display Weak (C)
makes the on-screen information Fine
adjustment (C)
more legible. Time Time
Degree of lever operation

05 06
 Improved vehicle stability
in turns and hydraulic operations New control linkage
Sensors detect the status of the travel and hydraulic The automatic suspension enhances safety in tight turns
operation. Depending on the situation, the automatic and during rapid acceleration and braking, locking the
suspension can lock the control linkage, thus stabilizing the caster wheel according to the vehicle status.
vehicle in turns and hydraulic operations.

• In turns: Reduces compression of the rear wheel

suspension and lifting of the load wheel, thus reducing
tilting of the vehicle.
• In hydraulic operations: Reduces vehicle tilting to the left
and right and forward tilting as a result of lift or reach
operations.

Automatic suspension
incorporating new
control linkage

Outstanding stability
and traveling performance
contribute to reliable operation.
Performance Anti-slipping control
This feature automatically limits power when tire slippage is detected during travel. It ensures the optimal driving force is
From the moment you set it in motion, you’ll experience the superior vehicle stability reflecting
consistently applied to maintain smooth operation.
the further evolution of our advanced control linkage. The rear tires provide grip
that is exceptional on uneven road surfaces while providinga consistently comfortable ride. • Comparison of starts on a wet surface
This innovative model incorporates the latest technology for smooth and stable operation
Without anti-slipping control
— whether accelerating, turning or stopping.

Central Management System

Two CPUs process the traveling system and hydraulic system independently. Another main CPU manages all other information.
The main CPU is connected to the display and handles all operation settings, function settings and indicator settings. The result
is comfortable, stress-free operation in a variety of environments.
Start position

Inverter
CPU for hydraulic Hydraulic With anti-slipping control
system AC motor
• Lever input
• Sensorless control

Display Main CPU (EPS, charger)

• Thermal protection for EPS motor
• Laser pointer (option)
• Charge monitoring system (option)
Inverter
CPU for traveling Traction
system AC motor
• Accelerator input
• Detection of rotation speed of traction motor
• Anti-slip control
• Automatic suspension Start position
EPS motor • Electric load-wheel brakes (high-performance type only)

07 08
 Lineup Choose the model with the features to meet your worksite.

Standard 1-ton model Standard 1.5-ton/2-ton/3-ton models

48 V, 1090-mm width

Standard mast type High mast type Standard mast type High mast type

3-m
mast
4-m
mast
3-m
mast
4-m
mast

1.2t 1.2t 1.5t 1.5t

Long wheelbase 1.8t 1.8t
2.0t 2.0t
2.5t 2.5t
3.0t 3.0t
Long wheelbase

Narrow chassis series

24 V, 990-mm width. Ideal for facilities with limited space.
Option
Standard mast type

3-m Laser Beam Positioning Unit Password Entry System Semi-Cold-storage Specification
mast
The red color laser beam For security to prevent misuses Capable of indoor/outdoor operation in
1.0t clearly indicates the position of trucks by unauthorized refrigerator-freezer temperatures of -35°C.
-35°C
operators, FRB-9 Series is
1.2t of fork pockets of the pallet,
allowing even untrained equipped with this new system,
operators easily conduct pallet whereby operators have to input
handling operations. their individual code numbers to
relase the lock before start up
Fully Cold-storage Specification
the truck. Capable of long hours of operation in
refrigerator-freezer temperatures of -35°C,
-35°C -55°C
as well as indoor/outdoor operation at -55°C.
Load Meter
The multi-display instantly shows the weight of the load.
This convenient function makes it easy to avoid
overloading and underloading. The tare weight setting
easily allows the operator to deduct the weight of
packaging and pallets.
(This function is NOT for commercial use.)

09 10
UniCarriers Corporation retains the right to change these products and specifications without incurring any obligation relating to such changes.
These products and specifications are subject to change without notice.
Photos and illustrations may slightly differ from the actual trucks.
Photos and illustrations may or may not include optional equipment and accessories.
Features and specifications may vary depending on markets.
Produced in ISO certified factory.

1-2, Shin-Ogura, Saiwai-ku, Kawasaki, Kanagawa, 212-0031, Japan

TEL:+81-44-330-9020
UniCarriers Corporation http://www.unicarriers.co.jp/en/
CEFRB9 1703
Printed in Japan SI-1703-01 EN