FSG • SP Series

High Precision Surface Grinder

612SP • 618SP • 818SP
FSG-618M • 2A618
FSG-2A818 • 3A818
FSG-2A1224 • 3A1224
 ACCUGRIND-612 • 618 • 818 SP
Super Precision Surface and Form Grinder
Machine Features

• Table traverses on linear ball bearings and D2 (SKD11) • Permanently lubricated and sealed cartridge-type spindle uses
hardened and ground guideways. two pairs of Class 7(P4) angular contact ball bearings.
• Reinforced ribbed column with hardened and ground guideway • 2HP dynamically balanced spindle motor.
system.
• Automatic lubrication system.
• Elevating and crossfeed leadscrews are hardened and ground.
• Main structure made of high quality cast iron.
• Saddle travels on Turcite-B coated and hand-scraped
• A mirror surface can be accomplished on these machines
double-V guideways.
accurately and efficiently due to machine construction
• Vertical handwheel at waist level. features and the specially designed V3 grade spindle motor
that provide excellent rigidity and stability.
• 0.001mm (0.000050") vertical micro-feed device.

Table Guideways Durable Slideways

Table is driven by steel wire and traverses Machine-base slideways are laminated with Turcite-B and
on hardened and ground guideways with steel precisely hand-scraped, low-friction slideways incorporated
ball bearings which have been accurately with an automatic intermittent lubrication system to ensure high
sieved. This provides smooth, accurate, accuracy and longer life of sildeways.
and efficient table movement.

Automatic Lubrication
The lubrication system provides lube oil to saddle, column
ways, crossfeed and elevating leadscrews. This system
minimizes the wear due to negligent operation, ensuring the
machine accuracy and extending the life of machine.
(3cc / 30 min ).

Feed Loop
Return Loop
Grease Lubrication

1. Column slideways
2. Elevating leadscrew
3. Lubricator
4. Oil Distributor
5. Machine base Double-V slideways
6. Crossfeed leadscrew
7. Table guideways with ball bearings are lubricated by grease.

ACCUGRIND-818SP
Note: Machine shown with optional accessories

2
ACCUGRIND-612 • 618 • 818 SP
Super Precision Surface and Form Grinder
Permissible Load of Machine
The total suggested maximum
workloads of table are shown as follows:

A=Workpiece B=Magnetic Chuck C=A+B

Kg (lbs.)
Model 612SP 618SP 818SP
A 130 (286) 180 (396) 215 (474)
B 20 (44) 30 (66) 35 (77)
Grinding with Grinding without C 150 (330) 210 (462) 250 (551)
Magnetic Chuck Magnetic Chuck

High Precision Cartridge Type Spindle Typical Accuracy

Spindle is supported by four pieces of Class 7 (P4) Parallelism of upper and lower sides of the
super-precision angular-contact ball bearing. The bearings are workpiece within 0.002mm (0.0001") Conditions:
accurately measured, selected and preloaded and assembled • Material: SAE1045 (S45C), HRC45
to ensure superior water resistance, longevity grinding accuracy • Workpiece Size: Ø25.4 x 25.4mm (1" x 1")
and surface finish. The labyrinth seal type structure is designed • Grinding Wheel: 38A46H (or equivalent)
to offer better water-resistance enhancing longevity of the • Dressing Speed: 60~360 mm/min. (0.04~0.24inch/sec.)
spindle bearings. • Specification of Dressing Diamond: 0.5~1.0 carat
• Dressing Depth: 0.003~0.006mm (0.0001"~0.0002")
• Table Speed: 10~20 m/min (33~66 fpm)
• Grinding Depth per Stroke:
0.001~0.005mm (0.000050"~0.0002")
• Room Temperature: 20~25°C (68~77°F)
• Grinding Wheel Size: Ø203 x 12.7 x Ø31.75mm
( Ø8"x 1/2" x Ø1 1/4")
Indexing Table Handwheel
The table handwheel
can be indexed to a
comfortable position to
enhance the ease of
table traverse.

Wheelhead and Column

The column casting is cross-ribbed for extra rigidity. The
elevating guideways of wheelhead and column are hardened Surface finish better than (or equal to) Rmax
and ground. The sliding surfaces of the wheelhead are
laminated with Turcite-B, providing accuracy of downfeed and 0.3S (3 micro inch AA) Conditions:
machine longevity. • Material: D2 (SKD11), HRC60
• Workpiece Size: 100 x 100mm (3.93" x 3.93")
• Grinding Wheel: ELBE 89A60-2I11V26 (or equivalent)
• Dressing Speed: 60~360 mm/min. (0.04~0.24inch/sec.)
• Specification Of Dressing Diamond: 0.5~1.0 carat
• Dressing Depth: 0.01mm (0.0004")
• Table Speed: 10~20 m/min (33~65fpm)
• Grinding Depth Per Stroke: 0.001mm (0.000050")
• Crossfeed: 0.4mm (0.016")
Elevating Micro-Feed Device • Room Temperature: 20~25°C (68~77°F )
The micro-feed device utilizes a worm and worm gear for • Grinding Wheel Size: Ø203 x 12.7 x Ø31.75mm
vertical feeds in increments of 1μm (0.000050"). The micro- ( Ø8" x 1/2" x Ø1 1/4")
feed device is engaged by turning the lever clockwise, which
also locks the handwheel to prevent any danger caused by
accidentally touching the handwheel. Operation of the
handwheel can be
resumed by turning
the lever counter-
clockwise.

3
 FSG-618M • 2A618
High Precision Surface Grinder
Machine Features

• This high-precision surface grinder has been specially • The optimum span of double-V crossfeed guideways is
developed to help manufactures with a wide range of needs. designed based on bending moment, kinematics and
supporting force.
• The tool cabinet in the machine base is specially designed for
operator's convenience (618M). • All essential castings are high-grade Meehanite cast iron
which the stress-relieved has been done through annealing to
• The interlock between electrical cabinet door and power eliminate internal stress.
supply is established to ensure safe operation.
• With the impressive stiffness and stability of its castings, this
• The maximum distance from the table surface to the spindle machine is suitable for both precision surface grinding and
centerline is 450mm (177"), which provides more clearance for form grinding.
grinding.
• This grinder is offered with one-year warranty for mechanical
• The manual grinders feature a spring-loaded-type table and electrical parts.
travel-stops that dampen the over travel caused by abnormal
operations.

High Precision Cartridge Type Spindle Durable Slideways

The spindle is supported by four pieces of Class 7 (P4) Machine base slideways are laminated with Turcite-B
super-precision angular contact ball bearings, which have and precisely hand scraped. The low-friction slideways
been accurately measured, selected and pre-loaded. Then incorporated with automatic forced lubrication system ensures
it's assembled in a temperature controlled room to ensure high-accuracy and longer way life.
better grinding accuracy and surface finish. The labyrinth seal
type structure is designed to offer better water resistance,
enhancing the longevity of the spindle bearings.

Indexable-Table Handwheel
The table handwheel can be indexed to a comfortable position
to enhance the ease of table traverse. (618M only)

Continuous-Loop-Type Table Transmission

Mechanism
A continuous-loop wire reinforced-cog timing belt drives the
table. This system ensures slip-free and smooth transmission
of table, enabling at least three-times longer life of a
continuous-cog timing belt compared to that of the wire type or
reciprocating timing belt type. The table traverses on hardened
and ground guideways with steel ball bearings providing
smooth, accurate and efficient table movement (618M).

FSG-618M
Note: Machine shown with optional accessories

4
FSG-618M • 2A618
High Precision Surface Grinder
Permissible Load of Machine
The total suggested maximum
workloads of table are shown as follows:

A=Workpiece B=Magnetic Chuck C=A+B

Kg (lbs.)
MODEL FSG-618 FSG-2A618
A 180 (396)
B 30 (66)
C 210 (462)
Grinding with Grinding without Magnetic
Magnetic Chuck Chuck

Automatic Lubrication Table-Reversing Mechanism (2A618)

By using proximity switches, operator can easily set a suitable
table stroke for each workpiece to save grinding time and to
obtain higher grinding efficiency. The proximity switches have
1 1 been properly covered for operator's safety (2A618).

8 8
3 4

5
7

Feed Loop
Return Loop
Grease Lubrication
1. Column slideways
2 .Elevating leadscrew
3. Crossfeed leadscrew
4. Machine base Double-V slideways
5. Solenoid pump
6. Lubricator
7. Flow divider
8. Table guideways with ball bearings lubricated by grease

Table Guide Ways (2A618)

The table transverse features hardened and ground guidways
with steel ball bearings, which have been accurately sieved,
for smooth, accurate and efficient table movement. (2A618)

FSG-2A618
Note: Machine shown with optional accessories

5
 FSG-2A818 • 3A818
Automatic Surface Grinder

Machine Features

This series has been specially developed and recently improved All essential castings are made of a high-grade cast iron that is
to continuously offer reliable high-performance precision stress relieved by annealing, ensuring the greatest stability and
surface grinders. The high-precision FSG-3A series surface rigidity with low-stress.
grinder has recently improved the control panel with easy to
read LED numerals. Chevalier offers a one year limited-warranty An interlock is placed between the electrical cabinet door and
that includes parts for mechanical and electrical components. the power supply as an added safety feature. The maximum
distance from table surface to spindle centerline is 450mm
The Double-V crossfeed guideway span has been designed by (17.7"), which provides more clearance for grinding.
applying kinematics to calibrate for minimum bending moments,
thus achieving maximum support capability for table and
workpiece.

High Precision Cartridge Type Spindle Table Reversing Mechanism

The spindle is supported by four pieces of Class 7(P4) super- By using proximity switches, the operator can easily set a
precision angular contact ball bearings. The bearing are suitable table stroke for each workpiece to save grinding time
accurately measured, selected and preloaded, then assembled and obtain higher grinding efficiency. The proximity switches
to offer superior water resistance, increasing the life of the have been properly covered for the safety of operator.
spindle bearings in the temperature-controlled rooms. This
ensures better grinding accuracy and surface finish. The
labyrinth seal type structure is designed to offer superior water
resistance, increasing the life of the spindle bearings.

Table Guideways
The table traverses on hardened and round guideways with
accurately sieved steel ball bearings, providing smooth,
accurate and efficient table movement.

FSG-2A818
Note: Machine shown with optional accessories Longitudinal
table movement is driven by hydraulic unit. Cross movement is
driven by AC motor.

6
FSG-2A818 • 3A818
Automatic Surface Grinder

Permissible Load of Machine

The total suggested maximum

workloads of table are shown as follows:

A=Workpiece B=Magnetic Chuck C=A+B

Kg (lbs.)
MODEL FSG-2A818 FSG-3A818
A 215 (474)
B 35 (77)
Grinding with Grinding without C 250 (551)
Electromagnetic Chuck Electromagnetic Chuck

Durable Slideways Elevating Micro-Feed Device (FSG-3A818)

Machine-base slideways are laminated with Turcite-B and The elevating system is equipped with a precision 0.002mm
precisely hand-scraped, low-friction slideways incorporated (00001") graduated micro-feed device, consisting of a worm
with an automatic intermittent lubrication system to ensure high and wormgear for precise manual positioning of the Y-axis.
accuracy and longer life of slideways.

Control Station (FSG-3A818)

The control station can be easily adjusted to a comfortable
position for the operator's convenience. All switches,
indicators, lamps, LEDS, and displays are ergonomically
designed for easy operation.

FSG-3A818
Note: Machine shown with optional accessories
Longitudinal table movement is driven by hydraulic unit.
Cross movement is driven by AC motor. Vertical feed
is driven by AC motor and equipped with automatic
downfeed device and manual micro downfeed device.

7
 FSG-2A1224 • 3A1224
Automatic Surface Grinder

Machine Features

This series has been specially developed and improved in achieve maximum support capability for table and workpiece.
recent years in order to continuously offer you reliable high All of high-grade cast iron that is stress-relieved by annealing
performance precision surface grinders. And as a guarantee to ensure superior stability and rigidity. An interlock has been
of that reliability we offer one year limited-warranty including placed between the electrical cabinet door and power supply
parts for mechanical and electrical components. The Double-V as an added safety feature. The maximum distance from table
crossfeed guideway span has been designed applying surface to spindle centerline is 630mm(24.8") which provides
kinematics to calibrate minimum bending movements to more space for grinding.

Longitudinal Slideways Durable Slideways

The longitudinal slideways are laminated with Turcite-B and Machine base slideways are laminated with Turcite-B and
precisely hand scraped. The low-friction slideways incorporated precisely hand-scraped. The low-friction slideways incorporated
with automatic forced with automatic forced
lubrication system lubrication system
ensures high accuracy ensures high accuracy
and longer way life. and longer life of
slideways.

High-Precision-Type Spindle Table Reversing Mechanism

The spindle is supported by four pieces of Class 7(P4) super- By using proximity switches,
precision angular-contact ball bearing. The bearings have operator can easily set suitable
been accurately measured, selected and preloaded and then table stroke for each workpiece
assembled to ensure superior water resistance, longevity to save grinding time and obtain
grinding accuracy and surface finish. The labyrinth seal higher grinding efficiency. The
type structure is designed to offer superior water resistance, proximity switches are properly
increasing the life of the spindle bearings. covered for operator's safety.

FSG-2A1224
Note: Machine shown with optional accessories

8
FSG-2A1224 • 3A1224
Automatic Surface Grinder

Permissible Load of Machine

The total suggested maximum
workloads of table are shown as follows:

A=Workpiece B=Magnetic Chuck C=A+B

Kg (lbs.)
Model FSG-2A1224 FSG-3A1224
A 314 (691)
B 106 (233)
C 420 (924)
Grinding with Grinding without
Electromagnetic Chuck Electromagnetic Chuck

Control Station (3A Series) Elevating Micro-Feed Device (3A Series)

The control station can be adjusted to a comfortable position The stepping downfeed device is very convenient for rough-
for operator. All switches, indicators, lamps, LEDS, and fine-grinding. By pushing down the step-feed button, the
and displays are designed as ergonomic infeed wheelhead will be 25μm (000001") or 5μm (00002")
concept for easy operation. selected by a selector at the top of this device. At the upper
position there is an adjustable handle for approaching and
rough-grinding.

FSG-3A1224
Note: Machine shown with optional accessories

9
 Optional Accessories
Halogen Lamp Inclinable Magnetic Chuck
B01-0101 (618M / 2A618, 612SP / B09-0104 (612SP)
618SP / 818SP) 100 x 175mm (3 15/16" x 6 7/8")
B01-0601 (3A818) B09-0105 (618M / 2A618, 618SP /
B01-0901 (2A818) 818SP, 2A, 3A818)
(12V / 20W) 150 x 300mm (5 7/8" x 11 7/8")
Electromagnetic Chuck
B09-0605 (612SP)
B09-0608 (612SP) (fine pole)
150 x 300mm (5 7/8" x 11 7/8")
Machine Lamp
B09-0106 (618M / 2A618, 618SP)
B01-0903 (2A, 3A1224)
150 x 450mm (5 7/8" x 17 3/4")
(12V / 50W)
B09-06071 110V (2A, 3A818)
200 x 450mm (7 7/8" x 17 3/4")
* To order B23-0701(2A) or B23-0602
(3A) chuck control is required.
Diamond Dresser B09-0609 (618SP) (fine pole)
B03-0101 (618M / 2A618) 150 x 450mm (5 7/8" x 17 3/4")
0.1 Carat B09-0607 (818SP)
B03-0401 (2A, 3A1224) B09-0610 (818SP) (fine pole)
1.0 Carat 200 x 450mm (7 7/8" x 17 3/4")
* To order B23-0901 control is required.
B09-04011(2A, 3A1224)
300mm x 600mm (11 3/4" x 23 5/8")
Diamond Dresser * To order B23-0701(2A) or B23-0602
B03-0601 (3A) chuck control is required.
(2A, 3A818, 612SP / 618SP / 818SP)
0.5 Carat Inclinable Electromagnetic
Chuck
B09-0601 (618M / 2A618)
150 x 450mm (5 7/8" x 17 3/4" )
B09-1101 (612SP)
Single Face Dresser 100 x 175mm (3 15/16" x 6 7/8")
B13-0301 (2A, 3A1224) B09-0107 (618SP / 818SP)
150 x 300mm (5 7/8" x 11 3/4")
B09-09011 100V (2A, 3A818)
200 x 300mm (7 7/8" x 11 3/4")
* To order B23-0701(2A) or B23-0602
(3A) chuck control is required.
Wheel Flange
B05-0101(618M / 2A618, 612SP / 618SP Precision Vise (All Series)
/ 818SP, 2A, 3A818) B11-0101 50 x 76mm (2" x 3")
Suitable for Ø203 x Ø31.75 x 12.7~19mm B11-0102 63 x 100mm
(8" x 1 1/4" x 1/2"~3/4") grinding wheel (2 31/64" x 3 15/16")
B11-0103 76 x 100mm (3" x 3 15/16")
B11-0104 89 x 127mm (3 1/2" x 5")
Wheel Flange B11-0105 100 x 127mm (3 15/16" x 5")
B05-0401 (2A, 3A1224)
Suitable for Ø355 x Ø127 x 50mm Parallel Dressing Attachment
(13.97" x 5" x 1.97") grinding wheel (Manual)
B13-0101 (618M / 2A618)
Punch Former B13-1101 (612SP / 618SP / 818SP)
B07-01011 All series B13-0603 (2A, 3A818)
Diameter of the punch: 4~25mm Suitable for 203mm (8") grinding wheel
(0.16" ~1") B13-0902 (2A, 3A1224)
Length of the punch: over 22mm (7/8") MAX. OD: 355mm (13.97")
MIN. OD: 235mm (9.25")
Permanent Magnetic Chuck Parallel Dressing Attachment
B09-0102 (618M / 2A618) (Hydraulic Crossfeed, Manual
150 x 450mm (5 7/8" x 17 3/4") Downfeed)
B09-0103 (2A, 3A818, 818SP) B13-04011(2A, 3A1224)
200 x 450mm (7 7/8" x 17 3/4")
MAX. OD: 355mm (13.97")
B09-0101 (612SP) MIN. OD: 235mm (9.25")
B09-0602 (612SP)(fine pole)
150 x 300mm (5 7/8" x 11 7/8")
B09-0102 (618SP)
B09-0110 (618SP) (fine pole) Parallel Dressing Attachment
150 x 450mm (5 7/8" x 17 3/4") (Hydraulic Crossfeed, Manual Downfeed)
B09-0103 (818SP) B13-0601 (2A, 3A818)
B09-0604 (818SP) (fine pole) Suitable for 203mm (8") grinding wheel
200 x 450mm (7 7/8" x 17 3/4")
10
Rapid Elevation with Micro Universal Wheel Guard for
Downfeed Device Side Forming
(Standard on 3A series) B41-0106 (618M / 2A618)
B39-0901 (2A818 / 1224) B41-1101 (612SP / 618SP / 818SP)
Motor: 0.19kW (1/4 HP ) B41-0901 (2A, 3A818)
Micro feed: Per revolution 0.2mm (0.01") Suitable for: Ø203mm (8") grinding
Per graduation 0.002mm (0.0001") wheel

Micro Downfeed Device

(Standard on 3A series)
Micro Crossfeed Device B39-0902 (2A818 / 1224)
B39-1101 (612SP / 618SP / 818SP) Micro feed:Per revolution 0.2mm
Per revolution 0.1mm (0.005") (0.01")
Per graduation 0.001mm (0.00005") Per graduation 0.002mm (0.0001")

Chuck Controller
(with variable holding power and auto
Rapid Elevation Device demangetizer)
B39-1102 (612SP / 618SP / 818SP) B23-0106 (618M / 2A618, 612SP /
Motor: 0.19kW (1/4HP) 618SP / 818SP)
Speed: 175mm/min. (8.75ipm) - 60Hz Input: 110VAC
Speed: 145mm/min. (7.25ipm) - 50Hz Output: 0~90VDC

Elbe Grinding Wheel Chuck Controller

(for Mirror Surface Grinding) B23-0401 (3A818 / 1224 CE machines
5915-44211002 and all 2A818 / 1224 machines)
(81A46-3K9V26) (612SP / 618SP / 818SP) (2A1224)
5915-44211005 Input: 135VAC
(81A46-3112V26) (612SP / 618SP / 818SP) Output: 115VDC

Single Side Water Baffle Chuck Controller

B19-0906 (2A, 3A818) B23-0602 (3A818 / 3A1224)
Double Side Water Baffle Input Voltage: 135V AC
Output Voltage: 110V DC
B19-0910 (2A, 3A1224)
with variable holding power control and
auto. demagnetizer ( for CE machines,
please choose B23-0401).
Splash Guard
(with Nozzle for Coolant System)
B19-0102 (618M / 2A618)
B19-0909 (2A, 3A818) Coolant System
B19-1101 (612SP) B17-0110
B19-1102 (618SP / 818SP) Volume: 42L
B19-0907 (2A, 3A1224) Pump: 1/8HP
Coolant Capacity: 20L/min.
Space: 530 x 360mm (20.87" x 14 1/4")
Balancing Stand with Bubble Height: 500mm (19 7/8")
B15-0102
(612SP / 618SP / 818SP /2A, 3A818)
Suitable for Ø230mm (9") grinding Coolant System with Double
wheel
Filter
B17-0901
Volume: 95L; Pump:1/8 HP
Coolant Capacity: 20L/min.
Balancing Stand Space: 660 x 480mm (26" x 18.9")
(ROLLER TYPE) All Series
Height: 610mm (24")
B15-0601
Suitable for Ø203~355mm (8"~13.98")
grinding wheel
Coolant System with Manual
Paper Feeding Device
(with 1 roll of Paper)
B17-0107 (2A, 3A1224)
Balancing Stand Volume: 85L; Pump:1/8 HP
with Leveling Bubble Coolant Capacity: 20L/min.
B15-0301 (2A, 3A1224) Space: 550 x 1,000mm
MAX. OD: 355mm (13.98") (21 21/32" x 39 3/8")
MAX. WIDTH: 50mm (1.97") Height: 775mm (30 1/2")

11
 Optional Accessories
Coolant System with Auto Paper Feeding Device Combination Coolant and Dust Exhaust Unit
(with 1 roll of paper) with Magnetic Separator
B17-0301 (2A, 3A1224) B17-0106
Volume: 120 L Volume: 34L
Paper feeding motor: 25W Pump: 1/8HP
Pump: 1/8HP Coolant Capacity: 20L/min.
Space: 1,450 x 620mm (57.1" x 24.4") Separator Capacity: 20L/min.
Height: 760mm (29.9") Space: 628 x 790mm
(24.7" x 31.1")
Coolant System with Auto Paper Feeding Height: 680mm (26.8")
Device and Magnetic Separator
(with 1 roll of paper) Combination Coolant and
B17-0302 Dust Exhaust Unit
Volume: 120L B17-0101
Paper feeding motor: 25W Volume: 34L
Pump: 1/8HP Pump: 1/8HP
Coolant Capacity: 20L/min. Coolant Capacity: 20L/min.
Separator Capacity: 40L/min. Space: 398 x 798mm
Space: 1,450 x 620mm (57.1" x 24.4") (15.7" x 31.4")
Height: 760mm (29.9") Height: 680mm (26.8")
Coolant System with Magnetic Separator
B17-0105
Volume: 50L Dust Collector
Pump: 1/8HP B17-0102
Coolant Capacity: 20L/min. Suction Motor: 1/2HP , 2P
Separator Capacity: 20L/min. Space: 470 x 500mm
Space: 655 x 520mm (18.5" x 19.7")
(25.8" x 20.5") Height: 585mm (23")
Height: 730mm (28.7")

Standard Accessories
• Tool box • plugs • Hex. wrench
• Semicircle wrench • Lifting lever • Grinding wheel
• Extractor nut • Phillips head screws • Wheel flange
• Balancing arbor • Headless screws
• Leveling pads • Cross screwdriver
• Leveling bolt • Slotted screwdriver

Dimensional Drawings
ACCUGRIND-612SP / 618SP / 818SP
Unit: mm(")
MODEL 612SP 618SP 818SP D
1,750
A 2,040 (80.3")
(68.89")
B 685 (26.97")
E
1,870 A
C 2,134 (84")
(73.6")
D 1,360 (53.5")
12.7 (0.5") L M
E
F 267 (10.5")
I J
G 11 (0.433") K
H
H 152 (5.98") 200 (7.87") C G
I 225 (8.9") 254 (10")
J 244 (9.6") 242 (9.5") F
K 500 (19.69")
L 203 (7.99")
M 50 (1.96")
B
12
Dimensional Drawings
FSG-618M / 2A618 Unit: mm(") D

MODEL FSG-618M / FSG-2A618

A 1,900 (74.8")
B 690 (27.2")
A E
C 2,130 (83.86")
D 1,400 (55.12") 1,600 (62.99")
L
E 12.7 (0.5") M
F 200 (7.9")
I J
G 11 (0.4") K
C H
H 146 (5.7")
G
I 197 (7.8")
J 183 (7.2")
K 450 (17.7") F
L 203 (7.99")
M 50 (1.97") B

FSG-2A818 / 3A818 Unit: mm(")

MODEL FSG-2A818 / FSG-3A818 D

A
A 2,200 (86.6")
B 690 (27.2") K
L
C 1,950 (76.77")
J H I
D 12.7 (0.5")
G
E 305 (12") C F
F 12 (0.5")
206 (8.1") E
G
H 274 (10.8")
I 271 (10.7")
J 450 (17.7") B
K 203 (8")
L 54 (2.1")

FSG-2A1224 / 3A1224 Unit: mm(")

MODEL FSG-2A1224 / 3A1224

D
A 2,670 (105.1")
B 920 (36.2")
C 2,050 (80.71")
D 1,810 (71.3")
50 (1.97") A E
E
F 402 (15.8")
G 14 (0.6") LM
H 305 (12")
I 385 (15.2") I J
C K
J 387 (15.2") H
G
K MAX. : 600 (23.6")
L 355 (13.98")
F
M 83 (3.3")
B

13
 Specification

Description 612SP 618SP 818SP

152 x 330mm 152 x 480mm 203 x 480mm
Table size (6" x 13") (6" x 19") (8" x 19")

Max. grinding length Longitudinal 355mm (14") 500mm (19")

Max.grinding width Crosswise 203mm (8") 230mm (9")

Max. distance from table 500mm (19")

150 x 300mm 150 x 450mm 200 x 450mm

Standard magnetic chuck size (5.9" x 11.8") (5.9" x 17.7") (7.9" x 17.7")
Travel, hydraulic N/A
Longitudinal Maxi. travel, manual 360mm (14") 510mm (20")
movement of table
Table speed, variable N/A

Rapid travel, approx. N/A

Auto increment N/A

Max. auto travel N/A

Cross movement
of table Max. manual travel 203mm (8") 230mm (9")
Handwheel per revolution 5mm (0.2")
Handwheel per graduation 0.02mm (0.001")
Micro Feed Optional 0.001mm (0.000050")

Automatic infeed N/A

Handwheel per revolution 1mm (0.05")

Wheelhead vertical Handwheel per graduation 0.005mm (0.0001")

infeed Rapid travel, approx. Optional 330 mm/min (13 ipm)

Per revolution 0.1mm (0.001")

Micro feed
Per graduation 0.001mm (0.00005")

Grinding spindle Speed 60Hz/3,450rpm , 50Hz/2,850rpm

drive Power rating 1.5kW (2HP)

Hydraulic drive Power rating N/A

Crossfeed drive Power rating N/A

Elevating drive Power rating Optional 0.19kW (1/4HP)

Diameter Ø203mm (8")

Standard grinding
Width Optional 12.7mm (0.5") , Max. 25.4mm (1")
wheel
Bore Ø31.75mm (1 1/4")
1,750x1,360x 1,870mm 2,040 x 1,360 x 2,134mm
Floor space (L x W x H)
(69" x 53.5" x 73.6") (80" x 53.5" x 84")

Net weight Approx. Based on 3A 1,050Kg (2,314 lbs.)

Rated power approx 1.65kW (2.2HP)

1,473 x 1,232 x 2,134mm

Packing dimensions (L x W x H) (58" x 48.5" x 84")

• All content is for reference only and may be subject to change without notice or obligation.

14
 FSG-618M FSG-2A618 FSG-2A818 FSG-3A818 FSG-2A1224 FSG-3A1224
146 x 460mm (5.7" x 18") 203 x 457mm (8" x 18") 305 x 610mm (12" x 24")

457mm (18") 457mm (18") 610mm (24")

152mm (6") 203mm (8") 305mm (12")

450mm (17") 450mm (17") 600mm (23.6")

150 x 450mm (5.9" x 17.7") 200 x 450mm (7.9" x 17.7") 300 x 600mm (11.8" x 23.6")

N/A 500mm (19.7") 500mm (19.7") 650mm (25.6")

482mm (19") 510mm (20") 530mm (21") 700mm (27.6")

N/A 5~25m/min (16~82 fpm) 5~25m/min (16~82 fpm) 5~25m/min (16~82 fpm)

N/A 960mm/min (48 ipm) 960mm/min (48 ipm) 1,100mm/min (56 ipm)

N/A 0.4~6mm (0.02"~0.24") 0.4~6mm (0.02"~0.24") 1~12mm (0.04"~0.5")

N/A 171mm (6.7") 230mm (9") 360mm (14.2")

180mm (7") 240mm (9.4") 370mm (14.6")

3mm (0.1") 4mm (0.2") 4mm (0.2")
0.01mm (0.005") 0.02mm (0.001") 0.02mm (0.001")
N/A N/A N/A
0.002~0.04mm 0.002~0.04mm
N/A N/A N/A
(0.0001"~0.0002") (0.0001"~0.0002")
1mm (0.05”) 2mm (0.1") 2mm (0.1")
0.005mm(0.0001”) 0.01mm (0.0005") 0.01mm (0.0005")
330 mm/min 330 mm/min
N/A N/A N/A
(13ipm) (13ipm)
N/A N/A 0.2mm (0.1") N/A 0.2mm (0.1")
N/A N/A 0.002mm (0.0001") N/A 0.002mm (0.0001")
60Hz/3,450rpm , 50Hz/2,850rpm 60Hz/3,450rpm , 50Hz/2,850rpm 60Hz/1,750rpm , 50Hz/1,450rpm
1.5kW (2HP) 1.5kW (2HP) 3.7kW (5HP)

N/A 0.75kW (1HP) 0.75kW (1HP) 1.5kW (2HP)

N/A 40W (0.05HP) 40W (0.05HP) 40W (0.05HP)

Optional Standard Optional Standard
N/A
0.19kW (1/4HP) 0.19kW (1/4HP) 0.19kW (1/4HP) 0.19kW (1/4HP)
Ø203mm (8") Ø203mm (8") Ø355mm (14")
12.7mm (0.5") 12.7mm (0.5") 50mm (2")
Ø31.75mm (1 1/4") Ø31.75mm (1 1/4") Ø127mm (5")
1,900x1,400x 2,130mm 1,900x1,600x2,130mm 2,200 x 1,575 x 1,950mm 2,670 x 1,810 x 2,050mm
(75" x 55" x 84") (75" x 63" x 84") (86" x 62" x 76") (105" x 71" x 80")

674Kg (1,485 lbs.) 790Kg (1,741 lbs.) 1,250Kg (2,755 lbs.) 1,320Kg (2,910 lbs.) 2,300Kg (5,070 lbs.)

1.65kW (2.2HP) 2.5kW (3.3HP) 3.7kW (5HP) 7.4kW (10HP)

1,120x1,016x2,160mm 1,550x1,120x2,130mm 1,854 x 1,549 x 2,210mm 2,743 x 1,905 x 2,235mm

(44" x 40" x 85") (61" x 44" x 84") (73" x 61" x 87") (105" x 72" x 75")

15
 ©1978-2017

Grinding Machine Grinding Machine Turning Machine Milling Machine

Headquarters U.S.A. Headquarters

MACHINE TOOLS CO., LTD. MACHINERY INC.

No. 34, Hsing Kong Road, Shang Kang, Chang Hua 9925 Tabor Place, Santa Fe Springs, CA 90670 U.S.A.
FSGnSP series_201709 / 2000P5@RichWell

TAIWAN 50971 Tel: (562) 903 1929 Fax: (562) 903 3959
Tel: +886 4 799 1126 Fax: +886 4 798 0011 www.chevalierusa.com
www.chevalier.com.tw [email protected]
[email protected]

All content is for reference only and may be subject to change without notice or obligation.