Scribd
Upload
62 views20 pages

MX-ONE Virtual r7.4 (++node)

Uploaded by

ahmed11tawfik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views20 pages

MX-ONE Virtual r7.4 (++node)

Uploaded by

ahmed11tawfik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

Virtualization

MiVoice MX-ONE v7.x (++Node)


Installation procedure
September 2022

MX-ONE r7.x Multi-Node


Prerequisites
General
Before proceeding with the software installation:
• Make sure all cables are firmly connected and all hardware is properly installed. See the installation
instructions for INSTALLING MX-ONE HARDWARE.
• The layout of the network must be defined. See the description for MX-ONE SYSTEM PLANNING.
• It is recommended for engineers installing the MX-ONE to be acquainted with the following areas:
- MX-ONE Service Node
- MX-ONE Service Node
- MX-ONE Lite (3U, with MGU board)
- MX-ONE 1U (former Slim, with MGU board)
- MX-ONE Classic (7U, with MGU board)
- MX-ONE Media Server (SW variant for SIP-only scenarios). See description of the MX-ONE
Media Server for installation instructions for the MX-ONE Media Server.
- Certification
- TCP/IP Networks
- XML
- Linux
- Databases, like Cassandra, LDAP, SQL, AD
• The following equipment is necessary:
- VGA screen
- Keyboard
- USB memory
- Mouse (if needed)
- USB hub (in case a USB mouse is used)
• Special consideration must be taken for the system database (Cassandra) deployment and
server requirements. For systems larger than 6 Service Node servers/LIMs, it is recommended to
deploy the system database on a stand-alone server (i.e. not co-located with the SN). See the
description SYSTEM DATABASE (CASSANDRA) .
• Special consideration must be taken for redundancy. See chapter Redundancy Considerations.

SW Only Installation
NOTE: The customer provides its own SLES12 SP5 compatible server and Operating System
(including Linux support subscription).
These are the minimum requirements for the MX-ONE Service Node when performing a SW Only
installation.

For a server with up to 1000 extensions (users):


• Processor: 2 GHz Intel Celeron J1900 2.0 GHz Quad core (ASU Lite)
• RAM memory: 8 GB
• Disc: 120 GB
• Intel x86 architecture
• Chipset with watchdog implementation
• LAN ports: 2 (100 or 1000 Mb/s)
• USB: 2 (USB 2.0 at least)
• Console I/O

For a server with up to 7500 extensions (users) the following minimum requirements apply.
• Processor: Intel i7 2.4 GHz Quad Core (or equivalent) (ASU-II)
• RAM memory: 16 GB
• Disc: 250 GB

MX-ONE r7.x Multi-Node


• Intel x86 architecture
• Chipset with watchdog implementation
• LAN ports: 2 (100 or 1000 Mb/s)
• USB: 2 (USB 2.0 at least)
• Console I/O

The following installation media/softwares must be available:


• SuSE Linux Enterprise Server 12 SP5, bootable media
• MX-ONE Media Kit

For larger installations (up to 15000 extensions) industry standard Intel X86 server, such as DELL
Power edge R4x0 series with a Xeon E3-12XX V5 3.0 Ghz Quad Core, or Xeon Silver 4215 2.5
GHz or with later CPU's, with up to 32GB memory minimum should be used.

Virtual Appliance
or more information, see description MX-ONE SERVICE NODE VIRTUALIZATION and installation
• instruction MX-ONE SERVICE NODE VIRTUAL APPLIANCE.

MX-ONE r7.x Multi-Node


Current Setup
Single System with 2 active Service Nodes

• MX-ONE (SNODE1)
• MX-ONE (SNODE2)

Deployment
MX-ONE V7.X VIRTUALIZATION (SERVICE NODE 3)

• Deploy OVF template


o create a name for your MX-ONE Virtual Machine

o select Virtual_Appliance-MX-ONE_7.x.xxx.xxx.xxx.ova
o select a Datastore
o Finish
o Take a snapshot of the image before Powering up of the VM
SERVICE NODE 3

MX-ONE Telephony Server setup

• Login to SuSe Linux


o login: root
o Password: changeme

• net_setup

• YES
Select the Keyboard layout then press
OK

• Set your Time Zone (press the spacebar to acknowledge the country selected)
• Master server (Lim1)

• No

• Select and configure only ipv4

• IPv4 address: xxx.xxx.xxx.xxx/24


• IPv4 default GW: xxx.xxx.xxx.xxx
• Hostname: XXXXXX
• Domain name: XXXXXX.COM
• Data Center name: DC1
• Rack Name: RACK1

• Set Passwords
o root >>>>>>>>>>>>> mx1_root
o mxone_admin >>>>> mx1_admin
o mxone_user >>>>>>> mx1_user

o No

• select YES to confirm the settings


• Installation of Service Node 3 is successful
• go back to Service Node 1
SERVICE NODE 1

• mxone_maintenance

• Server (Server in System)


• add the newly installed Server

• press “c”
o this will add the new Server to the Telephony Server

• enter password for the mxone_admin


• new Server is now added and can be assigned according to usage

ACTIVATING NEW SERVER AS SERVICE NODE 3

• LIM (LIM in System)


• add
o adding the new Server and configure it as LIM/Service Node

• select the Server (use spacebar)

• assign designated LIM/Service Node number


INSTALLING CASSANDRA DATABASE FOR THE NEW LIM/SERVICE NODE

• Cassandra Database (Cassandra database handling)


• add database to Server

• Ok

• Add IP alias address

`
CHECK SYSTEM DATA & STATUS

• execute command mxone_data -p –extra


•

• execute command in MDSH


o status -system

You might also like