Smith

SMITHSTRUCTURES (INDIA) PRIVATE LIMITED Structures

India Pvt. Ltd.

INSPECTION REPORT OF COLUMN LEVEL

Date: SSIPUPMG/IR&CI06, Rev. -00
Format No. & Rev. No.:

Project No. &Name: Effective Date: 16-06-2020

Site Location: 1of 1

Page No.:
Erector:
kim(snat)
Atagh lahshechi,Project Manager: m Anuh adau.
Site Engineer: NhshunayRegional Project Manager:
M)
Observed
Sr. No. Location Level (Required) Remark
Along Axis Along Axis Along Axis

+3

+2

-3

-2

43

t2

Note: 12843:1989/ Ase

tolerance as per IS
Meximum permnissible level with respect to true level =t 5mm
any bearing and seating
) Deviation indifterence in bearing levels of amember on adjacent pair of columns both
2)Deviation in across and along the building =t 5mm
dimension in mn
3)Al
Checked By Reviewed &Approved By:

SuRA
SMITH STRUCTURES INDIA) Smith
PRIVATE LIMITED Structures
india Pvt. Ltd.
INSPECTION REPORT OF COLUMN LEVEL
Date:
Format No. & Rev. No.: SSIPUPMG/IR&C/06, Rev. - 00
Project No. &Name:
Site Location: loDadhia Systesis Effective Date:

Page No.:
16-06-2020

l1 of 1
Erector:
Project Manager:
Site Engineer:
An Nish KoaRegional Project Manager:
Sr. No. Observed
Location
Level (Required) Remark
Along Axis Along Axis Along Axis

leag gaid li -2

Alag gaid lk

Aley
-3

Alyaid ie 42

Aleg -3

Note:
Mevimum pernissible tolerance as per IS 12843:1989 / AISC
4 Deviation in any bearing and seaing level with respect to true level= + Smm
2) Deviation in ifterence in bearing levels of a menber on adjacent pair of
columns both across and along the building = t
3) AM dimension
in mm 5mm

CheckeABY: Reviewed &Approved By:

SULTA
w SURAT

VHS
 Smith
Sructures
ndig Pvt. Ltd.:
|SMITH STRUCTURES INDIA) PRVATE LIMITED
INSPECTION REPORT OF COLUMN LEVEL
sSIPUPMGIR&CIO6, Rev. -00
Format No. & Rev. No.:
Date:
HProject No. &Name: 9sfoaj23
7lo Dodhie SyctsisHectie Date:
16-06-2020

Page No.: 1 of 1
Site Location:
Erector: Adaugl lousthProject Manager: My Aun a y
Site Engineer:
y Niish kuma Regional Project Manager:
Observed
Remark
Sr. No. Location Level (Required)
Along Axis Along Axis
Along Axis

+2

Aley qoid li
+2

4) +3

Note:
Mexinum permissible tolerance as per IS 12843:1989 / AISC
Deviation inany bearing and seating level with respect lo true level =t 5mm
2) Deviation in differerence in
bearing levels ofa member on adjacent pair of columns
3) AM dimension in mm both across and along the building = t 5mm
Checked By
Reviowed Approved By:

SURA
SMITH STRUCTURES (INDIA) Smith
PRIVATE LIMIIED Sructures
India Pyvt. Ltd.
INSPECTION REPORT OF COLUMN LEVEL
Date:
Format No, &Rev. No.: SSIPLIPMGR&CIO6, Rev. - 00
Project No, &Name:
Site Location: lo Dhia Sysdtsiectie Date: 16-06-2020
Page No.: |1of 1
Erector:
Site Engineer: Adagh CoshilProjectManager:
M is knar Regional Project Manager:
Sr. No. Observed
Location Level (Required)
Remark
Along Axis Along Axis Along Axis

|Alenygailih

Note:
Maximum permissible tolerarnce as per Is 12843:1989 AISC
)0evietion in any bearing and seating level with respoct to true level < 5imm
bearing leves of a member on adjacent pair of
2) Deviationin differencein columns both
3) All dimension in
mm across and along the building =
Smm
CheckeBy: Reviewed &Approved By:
RSULZA
SURAT