Applied Physics Lab Assignment 1
Applied Physics Lab Assignment 1
Assignment 1
______________________________________
LAB ENGINEER'S SIGNATURE & DATE
Objectives:
Introduction to Multisim Software.
Understanding and Implement Series, Parallel and Series-Parallel Combined loop
circuit On Multisim Software and its Verification using Ohm’s Law.
How to calculate current and voltage in Series, Parallel and Series-Parallel Combined loop the
circuit
Question 01:
In the circuit given below find out the following;
● Implement the circuit as shown in figure using resistors on MultiSim Software find out
the following using manual calculation and Multisim.
● Choose resistor values based on your Roll Number, for example, if your Roll Number
is 24K-1234, set R1 = 1 kΩ, R2 = 2 kΩ, R3 = 3 kΩ, and R4 = 4 kΩ. In case any digit
in Roll Number is zero take Resistance Value of 6 KΩ.
● Set Vs = 12V and verify that the voltage at each resistor is equal to the supplied voltage.
● Find the voltage VR1, VR2, VR3 & VR4 and Current Is.
● Find equivalent resistance of the circuit to calculate IS
● Attach the circuit diagram implemented on the software along with all voltages and
current values.
● Show all Calculations handwritten.
Student ID: _______________________
R1: _____________________________
R2:_____________________________
R3: _____________________________
R4:______________________________
Question 02:
In the circuit given below find out the
● Implement the circuit as shown in figure using resistors on Mutism Software find out
the following using manual calculation and Multisim.
● Choose resistor values based on your Roll Number, for example, if your Roll Number
is 24K-1234, set R1 = 1 kΩ, R2 = 2 kΩ, R3 = 3 kΩ, and R4 = 4 kΩ. In case any digit
in Roll Number is zero take Resistance Value of 6 KΩ.
● Set Vs = 9V and verify that the sum of current through each resistor is equal to the
supplied Current.
● Find current Is, I1, I2 and I3.
● Find equivalent resistance of the circuit to calculate IS
● Attach the circuit diagram implemented on the software along with all voltages and
current values.
● Show all Calculations handwritten.
Student ID: _______________________
R1: _____________________________
R2:_____________________________
R3: _____________________________
R4:______________________________
Vs Is I1 I2 I3 V
Question #3
● Implement the circuit as shown in figure using resistors on Mutism Software find out
the following using Manual calculation and multiset.
● Choose resistor values based on your Roll Number, for example, if your Roll Number
is 24K-1234, set R1 = 1 kΩ, R2 = 2 kΩ, R3 = 3 kΩ, and R4 = 4 kΩ. In case any digit
in Roll Number is zero take Resistance Value of 6 KΩ.
● Set Vs = 10 V and verify that the voltage at each resistor is equal to the supplied voltage.
● Find current Is, I1, I2, I3 and I4.
● Find the voltage VR1, VR2, VR3 & VR4.
● Find equivalent resistance of the circuit to calculate IS
● Attach the circuit diagram implemented on the software along with all voltages and
current values.
● Show all Calculations handwritten.
Student ID: _______________________
R1: _____________________________
R2:_____________________________
R3: _____________________________
R4:_____________________________
Is I1 I2 I3 I4
Vs
Measured Measured Measured Measured Measured
Performa Does not meet expectation Meets expectation Exceeds expectation Applica Marks
nce (0-1) (2-3) (4-5) ble/Not
Applica
ble (NA)
1. Realization Incapable of selecting relevant Needs guidance to select Selects relevant equipment on
of Experiment equipment on Multisim relevant equipment on Multisim Multisim software to the
[c] Software to conduct the
Software to perform the experiment of series, Parallel and
experiment of series, Parallel
and Series parallel Combined experiment of series, Parallel and Series parallel Combined Circuits
Circuits Using Resistors, Series parallel Combined Circuits Using Resistors, develops setup
equipment connection or Using Resistors, and to develop diagrams of equipment
wiring diagrams. equipment connection or wiring connections or wiring.
diagrams.
2. Individual or Distracts or discourages other Cooperates with other group Actively engages and cooperates
Teamwork [b] group members from members in a reasonable with other group members in an
conducting the experiment, or manner, or as an individual, effective manner, or actively
look discouraged or distracted perform the experiment in a perform an experiment in an
as an individual. manner guided. organized and professional manner
as an individual.
3. Conducting Unable to use mustimeter on Able to use DMM on multisim Able to use to measure multimeter
Experiment [a] multisim software to measure software to measure value of on multisim software to measure
value of voltage current, voltage current ,resistance and value of voltage current ,resistance
resistance and appropriate reads appropriate equipment, and reads appropriate equpiment,
equipment, and equipment examines equipment moving parts, carefully examines equipment moving
operation is substantially wrong. and operates the equipment with parts, and ensures smooth operation
minor error. and process.
4. Laboratory Disregards safety rules and Observes safety rules and Respectfully and carefully
Safety Rules [c] procedures. procedures with minor observes safety rules and
deviation. procedures
5. Data Does not know how to plan Able to use multimeter on Plans data collection to achieve
Collection [a] data collection to achieve Multisim software to check experimental objectives and Able
experimental goals; data resistance, voltage and to use Multimeter on Multisim
collected is incomplete and current value, Plans data Software to check resistance,
contain errors. collection to achieve current and voltage value, and
experimental objectives, and conducts an orderly and a complete
collects complete data with data collection.
minor error.
6. Data Unable to conduct simple Conducts simple computations Accurately conducts simple
Analysis [a] statistical analysis on collected and statistical analysis using computations and statistical
data; no attempt to correlate collected data with minor error; analysis using collected data;
experimental results with reasonably correlates correlates experimental results to
known theoretical values; experimental results to known known theoretical values; accounts
incapable of explaining theoretical values; attempts to for measurement errors and
measurement errors or account for measurement errors parameters that affect
parameters that affect the and parameters that affect experimental results.
experimental results. experimental results.
Total