ELECTROMAGNETIC INDUCTION

ELECTROMAGNETIC
INDUCTION

1. FARADAY’S LAWS OF ELECTROMAGNETIC INDUCTION

(i) When magnetic flux passing through a loop changes with time or
magnetic lines of force are cut by a conducting wire then an emf is
produced in the loop or in that wire. This emf is called induced emf.
If the circuit is closed then the current will be called induced current.
 
magnetic flux =
 B.ds
(ii) The magnitude of induced emf is equal to the rate of change of flux
w.r.t. time in case of loop. In case of a wire it is equal to the rate at
which magnetic lines of force are cut by a wire
d
E=–
dt
(–) sign indicates that the emf will be induced in such a way that it
will oppose the change of flux.
SI unit of magnetic flux = Weber.
Ex. 1 A coil is placed in a constant magnetic field
.The magnetic field is parallel to the plane
B
of the coil as shown in figure. Find the emf
induced in the coil .
Sol.  = 0 (always) since area is perpendicular to magnetic field.
 emf = 0
Ex. 2 Find the emf induced in the coil shown in Area=A
figure. The magnetic field is perpendicular
to the plane of the coil and is constant. B
Sol. = BA (always)
= const.
 emf = 0
Ex. 3 Find the direction of induced current in the
coil shown in figure. Magnetic field is per-
pendicular to the plane of coil and it is in
creasing with time.
Sol. Inward flux is increasing with time. To opposite it outward magnetic
field should be induced. Hence current will flow anticlockwise.
Ex. 4 Figure shows a coil placed in decreasing magnetic field applied per-
pendicular to the plane of coil .The magnetic field is decreasing at a
rate of 10T/s. Find out current in magnitude and direction

Sol.  = B.A
dB
emf = A . = 2 × 10 = 20 v
dt
 i = 20/ 5 = 4 amp. From lenz’s law direction of current will be
anticlockwise.
 ELECTROMAGNETIC INDUCTION

Ex. 5 Figure shows a coil placed in a magnetic field decreasing at a rate of 10T/s. There
is also a source of emf 30 V in the coil. Find the magnitude and direction of the
current in the coil.
Sol. Induce emf = 20V

equivalent
i = 2A clockwise

Ex. 6 Figure shows a long current carrying wire and two rectangular loops moving with v
velocity v. Find the direction of current in each loop.
Sol. In loop (i) no emf will be induced because there is no flux change.
(i)
In loop (ii) emf will be induced because the coil is moving in a region of decreasing constant i
magnetic field inward in direction. Therefore to oppose the flux decrease in in- v
ward direction, current will be induced such that its magnetic field will be inwards.
(ii)
For this direction of current should be clockwise.
2 LENZ’S LAW (CONSERVATION OF ENERGY PRINCIPLE)
According to this law, emf will be induced in such a way that it will
oppose the cause which has produced it. Figure shows a magnet
approaching a ring with its north pole towards the ring.
We know that magnetic field lines come out of the north pole and v
magnetic field intensity decreases as we move away from mag-
net. So the magnetic flux (here towards left) will increase with the N S
approach of magnet. This is the cause of flux change. To oppose
it, induced magnetic field will be towards right. For this the current
must be anticlockwise as seen by the magnet.
If we consider the approach of North pole to be the cause of flux
change,the lenz’s law suggests that the side of the coil towards the magnet will behave as North pole and will
repel the magnet. We know that a current carrying coil will behave like North pole if it flows anticlockwise.Thus
as seen by the magnet, the current will be anticlockwise.
If we consider the approach of magnet as the cause of the flux change, Lenz’s law suggest that a force
opposite to the motion of magnet will act on the magnet, whatever be the mechanism.
Lenz’s law tells that if the coil is set free, it will move away from magnet, become in doing so it will oppose
the ‘approach’ of magnet.
If the magnet is given some initial velocity towards the coil and is released, it will slow down .It can be
explained as the following .
The current induced in the coil will produce heat. From the energy conservation, if heat is produced there
must be an equal decrease of energy in some other form,here it is the kinetic energy of the moving magnet.
Thus the magnet must slow down. So we can justify that the lenz’s law is conservation of energy
principle.
3. MOTIONAL EMF
We can find emf induced in a moving rod by considering the no of lines cut by it per
sec assuming there are ‘B’ lines per unit area . Thus when a rod of length l moves
with velocity v in a magnetic field B, as shown, it will sweep area per unit time equal
to l v and hence it will cut B l v lines per unit time.
hence emf induced between the ends of the rod = Bv
d
Also emf = . Here denotes flux passing through the area,swept by the rod.The rod sweeps an area equal
dt
d Bvdt
to  vdt in time interval dt.Flux through this area = B vdt. Thus = = Bv
dt dt

If the rod is moving as shown in the following figure, it will sweep area per unit time = v sin

and hence it will cut B v sin lines per unit time . Thus emf = Bvsin.
 ELECTROMAGNETIC INDUCTION

3.1 Explanation of emf induced in rod on the basis of magnetic force: qE

P
If a rod is moving with velocity v in a magnetic field B ,as shown , the free
electrons in a rod will experience a magnetic force in downward direction E V ×B -
and hence free electrons will accumulate at the lower end and there will be
a deficiency of free electrons and hence a surplus of positive charge at the Q qvB
upper end. These charges at the ends will produce an electric field in down-
ward direction which will exert an upward force on electron. If the rod has
been moving for quite some time enough charges will accumulate at the ends so that
the two forces qE and qvB will balance each other. Thus E = v B.
VP – VQ= V B 
The moving rod is equivalent to the following diagram, electrically.

Q. 1 Find the emf induced in the rod in the following cases. The figures are self explanatory.

(a) Ans : emf = 0

(b) ×B Ans : emf = 0

(c) V Ans : emf = 0

Figure shows a closed coil ABCA moving in a uniform magnetic field B with a velocity v. C V
The flux passing through the coil is a constant and therefore the induced emf is zero.

A
Now consider rod AB , which is a part of the coil. Emf induced in the rod =B L v C
Suppose the emf induced in part ACB is E , as shown. E VBL
Since the emf in the coil is zero, Emf (in ACB) + Emf (in BA) = 0
or -E + vBL = 0
or E = vBL
Thus emf induced in any path joining A and B is same, provided the magnetic field is uniform. Also the
equivalent emf between A and B is BLv (here the two emf’s are in parallel) V
A
Ex. 7 Figure shows an irregular shaped wire AB moving with velocity v, as shown.
Find the emf induced in the wire. ×B 

Sol. The same emf will be induced in the straight imaginary wire joining A and B , which is Bv B
sin 

A A
 V
 
×B
×B
B B
 ELECTROMAGNETIC INDUCTION

Q. 2 A circular coil of radius R is moving in a magnetic field B with a velocity v as shown

in the figure. V B
Find the emf across the diametrically opposite points A and B.
Ans. 2RvB
A B

Q. 3 Find the emf across the points P and Q which are diametrically opposite points of
× B
a semicircular closed loop moving in a magnetic field as shown.Also draw the elecrical
V
equivalent ciruit of each branch. P a Q

Ans. Induced emf = 0 P Q

V
P Q
Q. 4 Find the emf across the points P and Q which are diametrically opposite points of a
semicircular closed loop moving in a magnetic field as shown. Also draw the electri- ×B
cal equivalence of each branch. P Q
a

Ans. Induced emf = 2Bav

Q. 5 Figure shows a rectangular loop moving in a uniform magnetic field .Show the elec-
trical equivalence of each branch.

Ans.

Moving
Q. 6 Figure shows a rod of length l and resistance r moving on two rails shorted by a Rod
B R
resistance R.A uniform magnetic field B is present normal to the plane of rod and l V
rails .Show the electrical equivalence of each branch.

Fixed conducting
thick rails

Ans.

Ex. 8 A rod of length l is kept parallel to a long wire carrying constant current i. It is moving away from the wire with
a velocity v. Find the emf induced in the wire when its distance from the long wire is x.
 0i l v
Sol. E=BlV=
2x
OR
Emf is equal to the rate with which magnetic field lines are cut . In dt time the area swept by the rod is l v dt.\
0i l vdt t
the magnetic field lines cut in dt time =B l vdt= .
2x B
 0i l v i l V
 The rate with which magnetic field lines are cut = Const
2x
x

Ex. 9 A rectangular loop ,as shown in the figure ,moves away from an infinitely long wire
carrying a current i. Find the emf induced in the rectangular loop.
 i  0i  0 iLby
E = B1 LV – B2Lv = 0 Lv  Lv =
2 x 2  x  b  2x x  b  L v
i
b
x

B1LV B2LV
 ELECTROMAGNETIC INDUCTION

Aliter:
Consider a small segment of width dy at a distance y from the wire. Let flux through the segment be d
 0i dy
 d = 2y L dy

xb
 0 iL dy y L V
 
2 x
y Constant
current i
x

 0 iL
= n x  b   nx 
2

d   0 iL  1 dx 1 dx   0 iL   b     0 ibLv
Now   x  b dt  x dt   2   x x  b   v = 2  x x  b 
dt 2    

 0 ibLv
 induced emf =
2x x  b 

Ex. 10 A rod of length l is placed perpendicular to a long wire carrying current i. The rod is
moved parallel to the wire with a velocity v. Find the emf induced in the rod , if its
nearest end is at a distance ‘a’ from the wire.

Sol. Consider a segment of rod of length dx , at a distance x from the wire. Emf induced
in the segment
 0i
d = dx.v
2x
a
 0 ivdx  0iv    a 
  = 
a
2 x
=
2
n 
 a 


Ex. 11 A rectangular loop is moving parallel to a long wire carrying current i with a v
velocity v. Find the emf induced in the loop , if its nearest end is at a
distance ‘a’ from the wire. Draw equivalent electrical diagram.
Const i 

 0 iv  a  b  b
n  a
2  a 

Sol. emf = 0 ;

 0 iv  a  b 
n 
2  a 

  0iv x
i= = ln  
Rr 2(R  r )   

4. INDUCED EMF DUE TO ROTATION

4.1 ROTATION OF THE ROD
Consider a conducting rod of length l rotating in a uniform magnetic field.
 ELECTROMAGNETIC INDUCTION

Emf induced in a small segment of length dr, of the rod = v B dr = rB dr

l 1
 emf induced in the rod =  B  r dr
0

2
B l2
r
equivalent of this rod is as following
B /2
2
1
d d flux through the area swept by the rod in time dt B  2 dt
or  =   = 2
dt dt dt dt
1 2
= B
2
B=uniform
Ex. 12 A rod PQ of length 2l is rotating about one end P in a uniform magnetic field B which is
perpendicular to the plane of rotation of the rod. Point M is the mid point of the rod. Find Q
P M
the induced emf between M & Q if that between P & Q = 100V .
2
Bw 2
Sol. EMQ + EPM = EPQ corner  = 100
2
2

B  2
EMQ + 2 = B
2 2
3 3
EMQ = B2 = ×100 V = 75 V
8 4
B
Q. 7 A rod PQ of length 2l is rotating about its mid point C, in a uniform magnetic field B which
Q
is perpendicular to the plane of rotation of the rod. Find the induced emf between P Q and P C
PC. Draw the circuit diagram of parts PC and CQ. 2

B 2
Ans. emfPQ = 0 ; emfPC =
2
Ex. 13 A rod of length L and resistance r rotates about one end as shown in figure. Its other end touches a conduct-
ing ring a of negligible resistance. A resistance R is connected between centre and periphery. Draw the
electrical equivalence and find the current in the resistance R. There is a uniform magnetic field B directed as
shown.
×B

E r
O r
A
r 1 i
O Bw2
Sol. A  2 
R R
1 2 D
Bw
2
R E
C
D

C
1
B 2
current i = 2
Rr
 ELECTROMAGNETIC INDUCTION

Ex. 14 Solve the above question if the length of rod is 2L and resistance 2r and it is E
rotating about its centre. Both ends of the rod now touch the conducting ring ×B

E r O
r r D
L
A
A
R

Sol. R     C,E,A O  C
r
E
C

E R


r/2
1
BL2
2
i 
r r
R R
2 2

Ex. 15 A rod of length l is rotating with an angular speed  about its one end which is at a
distance ‘a’ from an infinitely long wire carrying current i. Find the emf induced in the i 

rod at the instant shown in the figure. a

Consider a small segment of rod of length dx , at a distance x from one end of the rod. Emf induced in the
segment
 0i
dE = (xdx
2( x  a) a x 
i
 dx
 0i  i     a 
 E=
0

2 ( x  a )
(xdx = 0
2 
   a.n
 a 
 . x

Q. 8 A rod of length l is rotating with an angular speed  about its one end which is

at a distance ‘a’ from an infinitely long wire carrying current i. Find the emf
induced in the rod at the instant shown in the figure.

 0 i  a  a   cos  
Ans. E=   n  i 
2  cos   cos   a 

t=0
Ex. 16 A rod of mass m and resistance r is placed on fixed, resistanceless, smooth conducting
rails (closed by a resistance R) and it is projected with an initial velocity u .Find its ×B
 u R
velocity as a function of time.
m,r
Sol. Let at an instant the velocity of the rod be v .The emf induced in the rod will be vBl. The
electrically equivalent circuit is shown in the following diagram.
i

r R
 ELECTROMAGNETIC INDUCTION

B v
 Current in the circuit i =
Rr
At time t

Magnetic force acting on the rod is F = i B, opposite to the motion of the rod.
dV
iB = – m ...(1)
dt

B v
i= ...(2)
Rr
Now solving these two equation

B2 2 V dV
=–m.
Rr dt

B 2 2 dV
– . dt =
(R  r )m V

B 2 2
let =k
(R  r )m

dV
– K . dt =
V
v t
dV

u
V =   K.dt
0
–Kt
V = ue
u
v V
ln   = – Kt
u
V = ue–Kt t

Ex. 17 In the above question find the force required to move the rod with constant velocity v, and also find the power
delivered by the external agent .
Sol. The force needed to keep the velocity constant Fext = iB
B2 2 v
=
Rr
B2  2 v 2 2
Power due to external force = = = i2(R+r)
Rr Rr
Note that the power delivered by the external agent is converted into joule heating in the circuit. That means
magnetic field halps in converting the mechanical energy into joule heating.
Ex. 18 In the above question if a constant force F is applied on the rod. Find the velocity of the rod as a function of
time assuming it started with zero initial velocity.
dv
Sol: m = F – i B ....(1)
dt

B v
i= ....(2)
Rr

dv B2 2v
m =F–
dt Rr

B2 2
let K=
Rr
v t
dV dt

0
F  Kv = m
0
 ELECTROMAGNETIC INDUCTION

v
t
1
– ln (F – KV)
K
m
0

 F  kV  Kt
ln   =–
 F  m
F – KV = F e kt / m

F
V= (1 – e kt / m )
K
P

Ex. 19 A rod PQ of mass m and resistance r is moving on two fixed, resistanceless,

smooth conducting rails (closed on both sides by resistances R1 and R2) .Find r

the current in the rod at the instant its velocity is v.

R1 × B V R2

BV
Sol. i=
R1R 2
r Q
R1  R 2 Blv
R1 R2
this circuit is equivalent to the following diagram. r

Q. 9 In the above question if one resistance is replaced by a capacitor of capacitance

C as shown Find the velocity of the moving rod at time t if the initial velocity of the R F C
rod is v and a constant force F is applied on the rod. Neglect the resistance of the ×B
rod.
Sol. At any time t, let the velocity of the rod be v .
Applying Newtons law: F – ilB = ma ... (1)
dq
i1 dt
q
Also B l v = i1R = i
c F q
Applying Kcl, R V C
-q
dq BV d iB
B V ×B
i = i1+ = + BlvC or i= + BC a
dt R dt R

B22V dv
Putting the value of i in eq (1), F – = (m + B22C)a =(m + B22C)
R dt

dv
(m + B22C) = dt
B2l 2 v
F
R
Integrating both sides, and solving we get

 
tB 2  2 
FR  R(m  CB 2  2 ) 
v= 1  e 
B 2 2  
 

Q. 10 A rod PQ of length l is rotating about end P, with an angular velocity  . Due to
Q
centrifugal forces the free electrons in the rod move towards the end Q and an P
×

emf is created. Find the induced emf. 

The accumulation of free electrons will create an electric field which will finally balance the centrifugal forces
and a steady state will be reached. In the steady state m e2x = e E.
x l l
m e 2 x 2 2
VP–VQ =  E.dx =  dx = m e  
e 2e
x 0 0
 ELECTROMAGNETIC INDUCTION

4 .2. EMF INDUCED DUE TO ROTATION OF A COIL

V
Ex. 20 A ring rotates with angular velocity  about an axis perpendicular to the plane of the ring
passing through the center of the ring. A constant magnetic field B exists parallel to the axis. 
Find the emf induced in the ring Flux passing through the ring  = B.A is a constant here, B×
therefore emf induced in the coil is zero. Every point of this ring is at the same potential, by
symmetry.

Ex. 21 A ring rotates with angular velocity  about an axis in the plane of the ring and which
passes through the center of the ring. A constant magnetic field B exists perpendicular to
the plane of the ring. Find the emf induced in the ring as a function of time.
Sol: At any time t ,  = BA cos  = BA cos t
Now induced emf in the loop
d
e= = BA  sin t
dt
If there are N turns
emf = BAN sin t
BA N is the amplitude of the emf
e = em sin t EMF
NBA
e em
i= = sin wt = im sin wt
R R
t
em
im =
R
The rotating coil thus produces a sinusoidally varying current or alternating current. This is also the principle
used in generator.
Y Z
b
Ex. 22 Figure shows a wire frame PQSTXYZ placed in a time varying magnetic field given as
B=t, where is a positive constant. Resistance per unit length of the wire is Find the ×B b>a
current induced in the wire and draw its electrical equivalent diagram.
T S
X

Sol. Induced emf in part PQST =  a2 (in anticlockwise direction, from Lenz’s Law) ×B
a

Similarly Induced emf in part TXYZ =  b2 (in anticlockwise direction, from Lenz’s Law)
P Q
Total resistance of the part PQST =4a. 4b
a

Total resistance of the part PQST =l4b. The equivalent circuit is as i

shown in the following diagram.
b
2

writing KVL along the current flow

b2 –a2 – 4ai –4bi = 0 i i


i= (b – a)
4 i a
2

4.3 EMF Induced in a rotating disc : 4a

Consider a disc of radius r rotating in a magnetic field B.

Consider an element dx at a distance x form the centre. This element is moving with speed v = x.
 Induced emf across dx B
= B(dx) v + Bdxx = Bxdx
 emf between the centre and the edge of disc.
r
B r 2 x 
= 
0
Bxdx 
2 dx

5. FIXED LOOP IN A VARYING MAGNETIC FIELD

Now consider a circular loop, at rest in a varying magnetic field. Suppose the magnetic field is directed inside
the page and it is increasing in magnitude. The emf induced in the loop will be
d d dB d dB .
ε=– dt
.Flux through the coil will be  =- r2 B ;
dt
=-  r2 ;ε = –
dt
 ε = r2
dt dt
 ELECTROMAGNETIC INDUCTION

dB
 E 2 r =  r2
dt

r dB
or E=
2 dt
Thus changing magnetic field produces electric field which is non conservative in nature. The lines of force
associated with this electric field are closed curves.
6. SELF INDUCTION
Self induction is induction of emf in a coil due to its own current change.Total flux Npassing through a coil
due to its own current is proportional to the current and is given as N = L i where L is called coefficient of
self induction or inductance.The inductance L is purely a geometrical property i.e., we can tell the induc-
tance value even if a coil is not connected in a circuit. Inductance depends on the shape and size of the loop
and the number of turns it has.
If current in the coil changes by  in a time interval t, the average emf induced in the coil is given as
 ( N )  ( LI ) L I
 =
t

t

t
.

The instantaneous emf is given as  =  d ( N)   d ( LI )   LdI

dt dt dt
S.I Unit of inductance is wb/amp or Henry(H)
L - self inductance is +ve quantity .
L depends on : (1) Geometry of loop
(2) Medium in which it is kept. L does not depend upon current.
L is a scalar quantity.
6.1 Self inductance of solenoid
Let the volume of the solenoid be V , the number of turns per unit length be n.

Let a current I be flowing in the solenoid.Magnetic field in the solenoid is

given as B=0nI.The magnetic flux through one turn of solenoid = 0 n I A.
The total magnetic flux through the solenoid = N  = N0nI A = 0n2l A I
 L = 0 n2 l A = 0 n2 V
 = µ0 n i r2 (n)

L= = µ0 n2 r2.
i
Inductance per unit volume = µ0n2.
Self inductance is the physical property of the loop due to which it opposes the change in current that means
it tries to keep the current constant.Current can not change suddenly in the inductor.
7 INDUCTOR :
It is represent by
L
electrical equivalence of loop

R
L


If current i through the inductor is increasing the induced emf will oppose the increase in current and hence
will be opposite to the current.If current i through the inductor is increasing the induced emf will oppose the
decrease in current and hence will be in the direction of the current.
i i(decreasing) L
(increasing) L
i

Induced emf induced emf

 ELECTROMAGNETIC INDUCTION

Over all result

i
A > B
+ –
L di
dt

di
VA  L  VB
dt
Note :
If there is a resistance in the inductor (resistance of the coil of inductor) then :
A B  A B
L, R L R

Ex. 23 A B is a part of circuit. Find the potential difference vA – vB if

i 2

A B
1H 5volt
(i) current i = 2A and is constant
(ii) current i = 2A and is increasing at the rate of 1 amp/sec.
(iii) current i = 2A and is decreasing at the rate 1 amp/sec.
2i
+ –
Sol. B
A + – + –
1H 5volt

di
L
dt

di
= 1
dt
writing KVL from A to B
di
VA – 1 – 5 – 2i = VB .
dt

di
(i) Put i = 2, =0
dt
VA – 5 – 4 = VB
 VA – VB = 9 volt
di
(ii) Put i = 2 , =1;
dt
VA – 1 – 5 – 4 = VB or VA – VB = 10 V0
di
(iii) Put i = 2 , =–1
dt
VA + 1 – 5 – 2 × 2 = VB
VA = 8 volt.

7.1 Energy stored in an inductor:

If current in an inductor at an instant is i and is increasing at the rate di/dt,the induced emf will
oppose the current . Its behaviour is shown in the figure.
working as a load

i,increasing i
 di/dt L di/dt
 ELECTROMAGNETIC INDUCTION

di
Power consumed by the inductor = i L
dt

di
Energy consumed in dt time = i L dt
dt

1 2
 total energy consumed as the current increases from 0 to I =  iLdi =
0
2
L

1 2 1
=
Li  U= L 2
2 2
Note : This energy is stored in the magnetic field with energy density
dU B 2 B2
 
dV 2 2 0  r
B2
Total energy U =  2 0 r
dV

Ex. 24 A circuit contains an ideal cell and an inductor with a switch. Initially the switch is open .It
is closed at t=0.Find the current as a function of time.
di
Sol. =L
dt
i i


0
 dt =
 Ldi
0
t R i1 B i3
t = Li  i= A C
L t=0 i2 L
Ex. 25 In the following circuit, the switch is closed at t=0. Find the currents i1 ,i2 ,i3 and 
R
di 3 R
at t=0 and at t = . Initially all currents are zero.
dt F E D

Sol. At t = 0
i3 is zero ,since current cannot suddenly change due to the inductor.
 i1= i2 (from KCL)

applying KVL in the part ABEF we get i1= i2= .
2R R i1 B i3 C
At t=  A
t=0 i2
i3 will become constant and hence potential difference across the inductor will 
be zero.It is just like a simple wire and the circuit can be solved assuming it to R R
be like shown in the following diagram.
 2 F E D
i2= i3= , i1 = .
3R 3R s1 R s2 2R i
Ex. 26 In the circuit shown in the figure,S1 remains closed for a long time and S2 remains
open. Now S2 is closed and S1 is opened. Find out the di/dt just after that mo- L 4
ment. 

Sol. Before S2 is closed and S1 is opened current in the left part of the circuit = .
R

Now when S2 closed S1 opened, current through the inductor can not change suddenly , current will
R
continue to move in the inductor.
R 2R -4
/R
Ldi 4
dt i=/R
R 1
 ELECTROMAGNETIC INDUCTION

Applying KVL in loop 1.

di 
L + (2R ) + 4 = 0
dt R
di 6
=–
dt L
7. 2 Growth Of Current in Series R–L Circuit :
Figure shows a circuit consisting of a cell, an inductor L and a resistor R
,connected in series. Let the switch S be closed at t=0.Suppose at an instant
current in the circuit be i which is increasing at the rate di/dt.
di
Writing KVL along the circuit , we have – L dt
–iR=0

 Rt
On solving we get, i =  (1  e L )
R
The quantity L/R is called time constant of the circuit and is denoted by .The variation
of current with time is as shown.

Note :

1. Final current in the circuit = , which is independent of L.
R
2. After one time constant , current in the circuit =63% of the final current (verify yourself)
3. More time constant in the circuit implies slower rate of change of current.
4. If there is any change in the circuit containing inductor then there is no instantaneous effect on the
flux of inductor.
L1 i1 = L2 i2
R L
Ex.27 At t = 0 switch is closed (shown in figure) after a long time suddenly the induc-
L
tance of the inductor is made  times lesser ( ) then its initial value, find out

instant current just after the operation.
Sol. Using above result (note 4)
 S
L1 i1 = L2 i2  i2 =
R
Q. 11 Which of the two curves shown has less time constant.

Ans. curve1

DECAY OF CURRENT IN THE CIRCUIT CONTAINING RESISTOR AND INDUCTOR:

Let the initial current in the circuit be I0.At any time t,let the current be i and let its rate of change at this
di
instant be . i
dt + –
di L(di/dt)
L. + iR = 0 iR
dt
– +
di iR
= 
dt L
i t
di R

0
i
=-
L 
.dt
0
 Rt
 i 
ln   = – Rt or i=I e L

 0  L 0

1
Current after one time constant :i=I0 e =0.37% of initial current.
 ELECTROMAGNETIC INDUCTION

Ex. 28 In the following circuit the switch is closed at t = 0.Intially there is no R R

current in inductor. Find out current the inductor coil as a function of time. t=0
R
Sol. At any time t L

 + i1R – (i – i1) R = 0 
 + 2i1R – iR = 0
iR  
i1 =
2R R R
– + –
Now, i1R t=0 – iR + –
(i–i1)R R di
di L
 + i1R + iR + L. =0 + dt
dt  i–i1 +

 iR    di
 +   + iR + i . =0 i1 i
 2  dt

 3R di     3iR
– + = –L .    dt = –L . di
2 2 dt  2 

t i
 dt di dt di
–
2L
=
   3iR
 – 
0
2L =     3iR
0

t 1     3iR   3iR 3Rt

– = ln    – ln    =
2L 3R      2L

  
3Rt

i=+ 1  e 2L 
3R  
 
R L
i0
C
Ex.29 Figure shows a circuit consisting of a ideal cell, an inductor L and a resistor R
,connected in series. Let the switch S be closed at t = 0. Suppose at t = 0
current in the inductor is i0 then find out equation of current as a function of time

B S A
Sol. Let an instant t current in the circuit is i which is increasing at the rate di/dt.

R L

B S A

di
Writing KVL along the circuit , we have – L dt
–iR=0

i t
di dt

di
L    iR
dt
 
i0
  iR
 L
0

   iR  Rt
 ln    i R  = –   – iR = ( – i0R) e Rt / L
 0  L

  (  i0R )e Rt / L
 i=
R
 ELECTROMAGNETIC INDUCTION

Equivalent self inductance :

i
A > B
+ –
L di
dt

VA  VB
L ..(1)
di / dt
Series combination

i
>
A + – + – B
L1 L2

di di
VA – L1 – L2 = VB ....(2)
dt dt
from (1) and (2)
L = L1 + L2 ( neglecting mutual inductance)
Parallel Combination :

A i
+ +
> i1 i2
>

>

L1 L2

B – –

di1 di 2
From figure VA – VB = L1 = L2 ..... (3)
dt dt
also i = i1 + i2\
di di1 di 2 VA  VB VA  VB VA  VB
or   or = +
dt dt dt L L 1 L2
1 1 1
  ( neglecting mutual inductance)
L L1 L 2
8. MUTUAL INDUCTANCE

Consider two arbitrary conducting loops 1 and 2. Suppose that I1 is the instantaneous current flowing around
loop 1. This current generates a magnetic field B1 which links the second circuit, giving rise to a magnetic flux
2 through that circuit. If the current I1doubles, then the magnetic field B1 doubles in strength at all points in
space, so the magnetic flux 2 through the second circuit also doubles. Furthermore, it is obvious that the
flux through the second circuit is zero whenever the current flowing around the first circuit is zero. It follows
that the flux 2 through the second circuit is directly proportional to the current I1 flowing around the first
circuit. Hence, we can write 2=M21I1 where the constant of proportionality M21 is called the mutual induc-
tance of circuit 2 with respect to circuit 1. Similarly, the flux 2 through the first circuit due to the instanta-
neous current I2 flowing around the second circuit is directly proportional to that current, so we can write
1=M12I2 where M12is the mutual inductance of circuit 1 with respect to circuit 2. It can be shown that M21= M12
(Reciprocity Theorem). Note that M is a purely geometric quantity, depending only on the size, number of
turns, relative position, and relative orientation of the two circuits. The S.I. unit of mutual inductance is called
Henries (H). One henry is equivalent to a volt-second per ampere:
 ELECTROMAGNETIC INDUCTION

Suppose that the current flowing around circuit 1 changes by an amount I1 in a small time interval t. The
flux linking circuit 2 changes by an amount 2=MI1in the same time interval. According to Faraday’s law,
 2
an emf  2   is generated around the second circuit due to the changing magnetic flux linking that
t
I1
circuit. Since,  2 =MI1, this emf can also be written  2   M
t
Thus, the emf generated around the second circuit due to the current flowing around the first circuit is directly
proportional to the rate at which that current changes. Likewise, if the current I 2 flowing around the second
circuit changes by an amount I1in a time interval t then the emf generated around the first circuit is
I 2
1   M Note that there is no direct physical connection(coupling) between the two circuits: the cou-
t
pling is due entirely to the magnetic field generated by the currents flowing around the circuits.
Note : (1) M  L1L 2 where M is mutual inductance
L1 = self inductance of first coil
L2 = self inductance of second coil
(2) For two coils in series if mutual inducatnce is considered then
Leq = L1 + L2 ± 2M
Ex. 30 Two insulated wires are wound on the same hollow cylinder, so as to form two solenoids sharing a common
air-filled core. Let l be the length of the core, A the cross-sectional area of the core, N 1 the number of times
the first wire is wound around the core, and N2 the number of times the second wire is wound around the core.
Find the mutual inductance of the two solenoids,neglecting the end effects.
 0 N1 N 2 AI1
Sol. If a current I1 flows around the first wire then a uniform axial magnetic field of strength B1= is

generated in the core. The magnetic field in the region outside the core is of negligible magnitude. The flux
linking a single turn of the second wire is B1A. Thus, the flux linking all N2 turns of the second wire is f2= N2
 0 N1 N 2 AI1  0 N1N 2 A
B1 A = =MI1 .  M=
 
As described previously, M is a geometric quantity depending on the dimensions of the core and the manner
in which the two wires are wound around the core, but not on the actual currents flowing through the wires.
Ex. 31 Find the mutual inductance of two concentric coils of radii a1 and a2 (a1 << a2) if the planes of coils are same.

a2
a1

Sol. Let a current i flow in coil of radius a2.

 0i
Magnetic field at the centre of coil = 2a a12
2

 0i  0  a12
or Mi = a12 or M=
2a 2 2a 2
Ex. 32 Solve the above question, if the planes of coil are perpendicular.
Sol. Let a current i flow in the coil of radius a1. The magnetic field at the centre of this coil will now be parallel to
the plane of smaller coil and hence no flux will pass through it, hence M = 0.
Ex. 33 Solve the above problem if the planes of coils make  angle with each other.
Sol. If i current flows in the larger coil, magnetic field produced at the centre will be perpendicular to the plane of
larger coil.
 ELECTROMAGNETIC INDUCTION

Now the area vector of smaller coil which is perpendicular to the plane of smaller coil will make an angle 
with the magnetic field.
   i 2  0 a12 cos 1
Thus flux = B.A  0 .a1 . cos  or M
2a 2 2a 2

Ex. 34 Find the mutual inductance between two rectangular loops, shown in the figure
b
a
b
b
^ c
i x b
Sol. ^i
c
a

Let current i flow in the loop having -by long sides. Consider a segment of width dx at a distnace x as shown
flux through the regent
 i  0i 
d =  0  b dx .
 2 x 2 ( x  a) 

c b
  0i  0i   0ib  c  b a b c
 =   2x  2( x  a)  b dx 
c
2  ln
c
 ln
a  c 
. a

Q. 12 Find the mutual inductance of a straight long wire and a rectangular loop, as shown in
the figure b
 0b  a
Ans. M= ln 1  
2  x x

Ex. 35 Figure shows two concentric coplanar coils with radii a and b (a << b). A current i = 2t
b
flows in the smaller loop. Neglecting self inductance of larger loop
(a) Find the mutual inductance of the two coils
a
(b Find the emf induced in the larger coil
(c) If the resistance of the larger loop is R find the current in it as a function of time

Sol. (a) To find mutual inductance, it does not matter in which coil we consider current and in which flux is
calculated (Reciprocity theorem) Let current i be flowing in the larger coil. Magnetic field at the
 0i
centre = .
2b
 0i 2
flux through the smaller coil = a
2b

 M  0 a 2
2b
 di  
(ii) emf induced in larger coil  M  in smaller coil
dt
  
0  0 a 2
 a 2 (2) 
2b b
(iii) current in the larger coil

 0 a 2
=  .
bR
 ELECTROMAGNETIC INDUCTION

Q. 13 In the above Q. if a capacitor of capacitance C is also connected in the larger loop as C

shown in the figure, find the charge on the capacitor as a function of time.

Ans.  
q  C 1  e  t / RC where  
 0 a 2
b

Ex.36 If the current in the inner loop changes according to i = 2t2 then, find the current in the C
capacitor as a function of time.
0
Sol. M a 2
2b

 di   q –q
emf induced in larger coil  M  in smaller coil
dt
  
i
0 2 0 a 2 t R
e a 2 (4t) 
2b b
Applying KVL :- e

q 2 0 a 2 t q
+e – – iR = 0    iR  0
c b c
differentiate wrt time :-
2 0 a 2 i di
  R0
b c dt

on solving it i=
2 0 a 2C
b

1  e  t / RC 
9. TRANSFORMER
A transformer changes an alternating potential difference from one value to another of greater or smaller value
using the principle of mutual induction .Two coils called the primary and secondary windings,which are not
connected to one another in any way , are wound on a complete soft iron core.When an alternating voltage
EP is applied to the primary , the resulting current produces a large alternating magnetic flux which links the
secondary and induces an emf ES in it.It can be shown that for an ideal transformer
E s Ns  p Magnetic Core
 
E p N p  ;
s
Ns S

Np = turns ratio of the transformer..

EP ES
ES N and  are the emf, number of turns and current in the coils.
NS > N P  ES > EP  step up transformer.
NS < N P  ES < EP  step up transformer.
Primary Secondary
Note : Phase difference between the primary and secondary voltage is . coil coil
Energy Losses In Transformer
Although transformers are very efficient devices, small energy losses do occur in them due to four main causes.
1. Resistance of the windings. The copper wire used for the windings has resistance and so I2R heat losses occur.
2. Eddy Current.Eddy current is induced in a conductor when it is placed in a changing magnetic field or when a
conductor is moved in a magnetic field and/or both. Any imagined circuit within the conductor will change its
magnetic flux linkage and the subsequent induced emf. will drive current around the circuit.Thus the alternat-
ing magnetic flux induces eddy currents in the iron core and causes heating.The effect is reduced by lami-
nating the core, i.e, the core is made of this sheets of iron with insulating sheets between them so that the
circuits for the eddy currents are broken.
3. Hysteresis. The magnetization of the core is repeatedly reversed by the alternating magnetic field. The resulting
expenditure of energy in the core appears as heat and is kept to a minimum by using a magnetic material
which has a low hysteresis loss.
4. Flux Leakage. The flux due to the primary may not all link the secondary if the core is badly designed or has air
gaps in it .Very large transformers have to be oil cooled to prevent overheating.