Scribd
Upload
18 views6 pages

Import DXF Into SAP2000 - SAP2000 - CSI

Uploaded by

nathaly.rojas.vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views6 pages

Import DXF Into SAP2000 - SAP2000 - CSI

Uploaded by

nathaly.rojas.vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

General Topics SAP2000 CSiBridge ETABS SAFE PERFORM­3D CSiCOL Tutorials

Test Problems Documentation Licensing

SAP2000 / Home / Import


Import DXF into SAP2000
Added by Mike Abell, last edited by Mike Abell on Jun 18, 2012

NOTE: While written for SAP2000, this article also applies to CSiBridge.

Drawing Exchange Format (DXF) files may be imported from AutoCAD 2012 into SAP2000 using the procedure which follows:

1. Create and save a DXF model within AutoCAD. The example model we will use for this demonstration is shown in
Figure 1:

Figure 1 ­ DXF model for import into SAP2000

2. DXF entities should be coordinated with SAP2000 objects such that they import as follows:

DXF entity SAP2000 object Color

1 Point Joint Yellow

2 Line Frame Yellow

3 Point Link (one­point) Green

4 Line Link (two­point) Green


4 Line Link (two­point) Green

5 3D Face Shell Red

6 Polygon Mesh Solid White

3. Within SAP2000, select File > Import > AutoCAD .dxf File, as shown in Figure 2:

Figure 2 ­ Select the DXF Import feature

NOTE: AutoCAD does not need to be installed on the desktop to import and export between SAP2000 and DXF.
This is because DXF files are in text format, which is published and available to the public.

4. Verify that DXF Files (*.DXF) is selected from the scroll­down menu, then locate and double­click the DXF file for import
into SAP2000, as shown in Figure 3:
Figure 3 ­ Select DXF file for import

5. Select the Global Up Direction and the Units, then select OK, as shown in Figure 4:
Figure 4 ­ Import specifications

6. Assign each type of SAP2000 object to a DXF layer (Figure 5). Each layer which occurs in the DXF file is listed in the
scroll­down menu.
Figure 5 ­ Layer specifications

7. Select OK, then the DXF file will import as a SAP2000 model, as shown in Figure 6:
Figure 6 ­ DXF file as SAP2000 model

See Also
Sample DXF files for import article – sample shell and solid models in DXF format

SAP2000­AutoCAD interoperability FAQ

Import DWG into SAP2000 article

Export SAP2000 to DXF article

Export SAP2000 to DWG article

You might also like