HOME BLOG LIST OF O LEVEL PHYSICS DEFINITIONS

List of O Level Physics Definitions

 EMILY  OCTOBER 12, 2021  O LEVEL
In this post, I have included a list of O Level Physics definitions. Here, you will find the common
terms that you will be asked to define in O Level Physics exams.

Definition questions for O Level Physics are usually worth 1 to 2 marks each. Although it’s just
simply a regurgitation question, it’s a pain to many as such questions are just pure memorising,
and in order to score, you’ll need to make sure you have the keywords in your answer. My advice
for O Level students would be to keep this list with you, and memorise the definitions ﴾or test
how well you remember them﴿ a few days before the exam.

In this post, you will find the common definitions asked for O Level Physics. Note that this is not
an exhaustive list but should cover most of what you need ﴾to define﴿ for your exam.

O Level Physics Definitions based on topics

I have classified all these terms that you need to define according to the topics. Click on the link
below to go straight to the definitions in the particular topic.

Physical Quantities, Units and Measurement

Kinematics
Dynamics
Mass, Weight and Density
Turning Effect of Forces
Pressure
Energy, Work and Power
Temperature
Transfer of Thermal Energy
Thermal Properties of Matter
 Thermal Properties of Matter
General Wave Properties
Light
Electromagnetic Spectrum
Sound
Static Electricity
Electricity
Magnetism/ Electromagnetism/ Electromagnetic Induction
Radioactivity

Definitions: Physical Quantities, Units and Measurement

Scalar Quantity: A scalar quantity is one that has magnitude but no direction. e.g. mass, time,
distance, speed

Vector Quantity: A vector quantity is one that has both magnitude and direction. e.g.
displacement, force, velocity, acceleration.

Definitions: Kinematics
Speed: Speed is the rate of change of distance with time.

Velocity: Velocity is the rate of change of displacement with time.

Acceleration: Acceleration is the rate of change of velocity with time.

Constant acceleration: A body is moving at constant acceleration when there is a constant rate
of change of velocity with time.

Definitions: Dynamics

Newton’s First Law of Motion: Newton’s first law of motion states that every object will
continue in its state of rest or uniform velocity if no net force acts on it.

Newton’s Second Law of Motion: Newton’s second law of motion states that for an object with
a constant mass, the net force acting on it is directly proportional to its acceleration. The
direction of the acceleration is the same as the direction of the net force.
Newton’s Third Law of motion: Newton’s third law of motion states that if an object A exerts a
force on object B, then object B must exert of force of equal magnitude and in opposite direction
back on object A.

Friction: Friction is the force that opposes motion. It only acts when an object is moving.

Definitions: Mass, Weight and Density

Mass: Mass is a measure of the amount of substance in a body.

Weight: Weight is the amount of gravitation force acting on a body.

Inertia: Inertia is the state that mass of a body resists a change in the state of rest or motion.

Gravitational field: Gravitational field is a region in which a mass experiences a force due to
gravitational attraction.

Gravitational field strength: The gravitational field strength at a point is the gravitational force
acting per unit mass.

Definitions: Turning Effect of Forces

Principle of moments: Principle of moments states that for a body to be at equilibrium, the sum
of the clockwise moment about a point is equal to the sum of the anti‐ clockwise moment about
the same point.

Moment: Moment of a force is equal to the product of the force and the perpendicular distance
from the line of action of the force to the pivot.

Definitions: Pressure
Pressure: Pressure is the force acting per unit area.

Definitions: Work, Energy, Power

Principle of conservation of energy: Principle of conservation of energy states that energy
cannot be created or destroyed. It can only be converted from one form to another, or
transferred from one body to another. Total amount of energy in an isolated system is always
constant.

Work done: Work done is the product of force and distance moved in the direction of the force.
Power: Power is the rate at which work is done.

Efficiency: Efficiency is the ratio of useful power output to total power input. OR Efficiency is the
ratio of the energy converted to useful output to the total energy input.

Definitions: Temperature
Temperature: Temperature is the measure of the degree of hotness or coldness of a body.

Definitions: Transfer of Thermal Energy

Conduction: Conduction is a process where heat is transferred through a medium from one
particle to another.

Convection: Convection is a process where heat is transferred by the movement of heated

particles of a fluid.

Radiation: Radiation is a process where heat is transferred by means of infra‐red radiation.

Definitions: Thermal Properties of Matter

Heat capacity: Heat capacity is the thermal energy needed to change the temperature of the
entire substance by 1 degree Celsius.

Specific heat capacity: Specific heat capacity is the thermal energy needed to change the
temperature of a unit mass of the substance by 1 degree Celsius.

Latent heat of fusion: Latent heat of fusion is the energy required to change the entire
substance from solid to liquid without a change in temperature.

Specific latent heat of fusion: Specific Latent heat of fusion is the energy required to change a
unit mass of the substance from solid to liquid without a change in temperature.

Latent heat of vaporisation: Latent heat of vaporisation is the energy required to change the
entire substance from liquid to gas without a change in temperature.

Specific latent heat of vaporisation: Latent heat of vaporisation is the energy required to
change a unit mass of the substance from liquid to gas without a change in temperature.

Definitions: General Wave Properties

Definitions: General Wave Properties
Speed: Speed of wave is the distance travelled by the wave over the time taken.

Frequency: Frequency of the wave is the number of oscillations per unit time made by a particle
of a wave.

Wavelength: Wavelength is the distance between two successive points on a wave that are in
phase.

Period: Period is the time taken for a particle of a wave to complete one oscillation.

Amplitude: Amplitude is the maximum displacement of a particle from its equilibrium position.

Wavefront: A wavefront is an imaginary line or curve that joins all adjacent points of the waves in
the same phase.

Definitions: Light
Refraction: Refraction is the bending of light rays as they pass from one optical medium to
another and undergo a change in speed.

Refractive index: The refractive index of a medium is the ratio of the speed of light in vacuum to
the speed of light in the medium.

Critical angle: Critical angle is the angle of incidence in the optically denser medium for which
the angle of incidence in the optically less dense medium is 90o.

Total internal reflection: Total internal reflection occurs when light is travelling from an optically
denser to an optically less dense medium and the angle of incidence in the denser medium is
greater than critical angle.

Focal length for a converging lens: Focal length is defined as the distance from the optical
centre of the lens to the focal point on the principal axis.

Definitions: Electromagnetic Spectrum

Electromagnetic waves: Electromagnetic waves are transverse waves that travel with the same
speed in
vacuum and state the magnitude of this speed.
Definitions: Sound
Ultrasound: Ultrasound is sound that has a frequency greater than the higher limit of the human
audible range i.e. 20000 Hz.

Definitions: Static Electricity

Electric field: An electric field is a region in which an electric charge experiences a force

Definitions: Electricity
Current: Current is the rate of flow of charges.

Electromotive force ﴾e.m.f﴿: Electromotive force ﴾e.m.f.﴿ is the work done by a source in driving
unit charge around a
complete circuit.

Potential difference ﴾p.d.﴿: Potential difference ﴾p.d.﴿ across a component in a circuit is the work
done to drive unit charge through the component.

Ohm’s Law: Ohm’s law states that the potential difference across a conductor is proportional to
the electric current passing through it, provided that its temperature remains constant.

Fuse: A fuse is placed in the live wire so that if there is a fault in the circuit, and the current
exceeds the fuse rating, the fuse melts, and stops the flow of current through the circuit.

Circuit breaker: A circuit breaker will open the circuit when the current exceeds a predetermined
amount.

Double insulation: Double insulation consists of two layers of insulation to ensure the outer
casing of an appliance does not become ‘live’

Live wire: A live wire is connected to the high voltage supply and allows current to flow through
and reach the appliance.

Neutral wire: A neutral wire is connected to the 0 Volts supply and allows current to flow back to
the source and hence completes the circuit.

Earth wire: An earth wire is a wire with a very low resistance. In the event the live wire touches
the metal casing, causing the metal casing to become ‘live’, the earth wire conducts the current
away to earth, preventing the user who touches the metal casing from getting an electric shock.
Definitions: Magnetism, Electromagnetism and
Electromagnetic induction
Magnetic field: A magnetic field is a region in which a magnetic material placed in that region
experiences a magnetic force.

Definitions: Radioactivity
Proton ﴾atomic﴿ number: Number of protons in an atom.

Nucleon ﴾mass number﴿: Number of protons and neutrons in an atom.

Isotopes: Isotopes have the same number of protons but different number of neutrons.

Half life: Time taken for the concentration/ count / count rate of the radioactive substance to
decrease to half its original value.

Background radiation: Radiation that occurs naturally e.g. due to radioactive materials in soil or
rocks, cosmic radiation, radiation from food, etc.

Learn On‐demand – O Level Physics Courses

Knowing the definition is only a small part of the O Level Physics exam. We go into detail what you
need to know, and how to apply the concepts in our O Level Physics courses. Find out more here.

 Tagged olevel physicsdefinition

PREVIOUS NEXT

Using Graphic Calculator for AP GP O Level Physics Formulae

Questions ﴾ Arithmetic and Geometric
Progression﴿
 Search …

CATEGORIES

A Level

Chemistry

A Level Chemistry

O Level Chemistry

Math

Additional Mathematics

EMATH

H2 Math

N Level

Additional Math – N Level

O Level

Physics

O Level Physics

RECENT POSTS

Radioactivity: What’s tested in O Level Physics

2023 Mathematics Specimen Paper 2

2023 Mathematics Specimen Paper 1

Orbital Hybridisation – sp³, sp², sp hybridisation

How to find probabilities for binomial distribution with TI 84 graphic calculator

 Emily L…
17 followers

Follow Page

Emily
Learning
about 2
months ago

Motivational Quote
from Thomas
Edison
"I have not failed.
I've just found
10,000 ways that
won't work." ­
Thomas Edison

COURSES BLOG CATEGORIES

All Courses Select Category

O Level Add Math
O Level Chemistry
O Level Physics RECENT POSTS
A Level Chemistry
Radioactivity: What’s tested in O Level Physics

OTHER SITES 2023 Mathematics Specimen Paper 2

Chemistry for secondary school 2023 Mathematics Specimen Paper 1

A Math for secondary school
Orbital Hybridisation – sp³, sp², sp
hybridisation

How to find probabilities for binomial

 distribution with TI 84 graphic calculator

Copyright © 2023 Emily Learning Privacy Policy | Disclaimer Policy | Terms of Use
| Contact