Mohammed Hamid Qamruddin Khan

Electrical Engineer

Mobile No. +918080233701

Email-ID [email protected]
[email protected]

I'm seeking a role where I can leverage my technical expertise and interpersonal skills to make valuable
contributions to projects. Additionally, I'm enthusiastic about gaining knowledge in emerging technologies
and systems within the construction industry.

Skills & Abilities

• With an extensive background of approximately 13 years, I have been involved in a Design &
Construction of Metro, Airport, Hotels, and Commercial Buildings Projects.
• I have a proficient understanding of AutoCAD 2021, Dialux Evo, Revit-BIM 2021, E-Plan,
ETAP 19.5, MS-Office, MS-Project, Primavera P6.2.
• Demonstrating substantial expertise in tasks including preparation of Prequalification
Documents, Technical Submittals, Document Submittals, Shop drawings (Calculation and
Layout Plan), Red Line Drawings, As-Built Drawings, RFQ, RFI, Quantity Surveying
report, FAT, SAT, Project Budget Schedule, Cost Variation documents, Test reports, Root
Cause Analysis Reports, Site Progress reports, NCR closure reports, Clash Reports, etc.
• Operating in accordance with various Electrical Regulations and Standards such as NFPA/ NEC,
IEC, BS-EN, IEEE, QCS2014, KAHRAMA, DEWA, Civil Defence, etc.
• Demonstrating substantial proficiency in Estimation, Installation, Testing and Commissioning of
a wide array of Medium Voltage (MV) and Low Voltage (LV) Systems including
General/Emergency Lighting, Decorative Lighting, General / Emergency / UPS Power,
Lighting Control System, Blind Motor Control, Distribution Panels, MCC Panels, Variable
Speed Drives, CBDB Panel, Transformers, LV/MV Panels, Variable Frequency Drives,
Starters, etc.
• Possessing fundamental knowledge of PLC, SCADA, DCS, Instrumentation, Hydraulic and
Pneumatic System, and HMI.
• Demonstrating substantial proficiency in Estimation, Installation, Testing and Commissioning of
a wide array of ELV/Low Current Systems including, Gas Detection System, Fire Alarm
System, Intrusion Alarm System, IBMS, CCTV, PAGA System, AV System, Structured
Cabling, Access Control System, Gate Barrier System, etc.
• Demonstrating substantial proficiency in installation of Cable Tray, Cable Trunk, GI Conduit,
PVC Conduit as per IEC and NEMA standards.
• Demonstrating substantial proficiency in laying, Testing and Termination of Power &
Network Communication Wires & Cables.
• Possessing knowledge of implementing Automation Controls within Electrical and Mechanical
Systems such as AHU, VRV, FCU, VAV, CAV, etc.
• Possessing fundamental knowledge in Electrical calculations.
• Exhibited strong coordination between different teams involved in project.
• Demonstrating a strong gasp of HSE, as well as QA/QC requirements.

Page 1 of 5
Internal
 Educational Qualification
● Bachelor of Engineering in Electrical Engineering
University of Mumbai, Mumbai, India
Finolex Academy of Management and Technology, Ratnagiri, India
2006 – 2009
● Diploma in Industrial Electronics
Maharashtra State Board of Technical Education
Terna Polytechnic, Navi Mumbai, India
2002 – 2006

Certification / Membership
● UPDA / MMUP Certification (Grade – Trainee)
Ministry of Municipality, Qatar
Expiry Date: - 12th Feb., 2025

Technical Courses
● AutoCAD
CADD Center, Navi Mumbai, India
2009

● Primavera
CADD Center, Navi Mumbai, India
2009

● Revit MEP
CADD Center, Navi Mumbai, India
2018

● Post Graduate Diploma in Industrial Automation

Prolific Systems & Technologies Ltd., Thane, India
2022

Work Experience

Position: Electrical Engineer

Company Name: Trags Engineering
Location: Doha, Qatar
Duration: 12th May. 2019 – 31st Mar. 2022
Responsibilities: -
• Pre-project assessment for design coherence and alignment with specifications.
• Evaluation of technical documentation from Electrical and Telecommunication vendors.
• Coordination with draftsman for shop drawings of Electrical and Telecommunication Systems.
• Reviewing design deliverables for completeness and alignment.
• Supervising a project team and system specialists for the execution of the project.
• Engaging with Consultants/Clients and maintaining coordination.
• Managing project timelines and workforce.
• Leading testing and troubleshooting on-site issues.

Page 2 of 5
Internal
 • Participating in routine meetings with stakeholders.
• Keeping project managers informed of progress and changes.
• Identifying opportunities for project variations.
• Implementing Request for Information (RFI) process.
• Maintaining records and ensuring compliance with HSE and QA/QC requirements.

Position: MEP Engineer

Company Name: Leighton India Contractors Pvt.
Location: Mumbai, India
Duration: 28th May. 2018 – 31st Mar. 2019
Responsibilities: -
• Evaluate technical documentation from Electrical Sub-Contractors.
• Review Electrical (LV and ELV) Contractor’s shop drawings for approval.
• Collaborate with the Consultant for document approval.
• Inspect materials and site work, generating reports.
• Issue NCR for non-compliant work.
• Lead Testing and Commissioning, troubleshoot and resolve faults.
• Attend routine meetings with stakeholders.
• Coordinate with various teams for installation, testing, and commissioning.
• Collaborate with Civil and Mechanical Contractors.
• Identifying opportunities for project variations.
• Implementing Request for Information (RFI) process.
• Maintain site reports and ensure HSE and QA/QC compliance.

Position: MEP Engineer

Company Name: Oasis Tech Contracting LLC
Location: Abu Dhabi, UAE
Duration: 03rd Dec. 2015 – 14th Feb. 2018
Responsibilities: -
• Assessing design coherence and specifications before project commencement.
• Evaluating Technical Documentation from Electrical (LV and ELV) Sub-Contractors.
• Review shop drawings to ensure they meet standards and project requirement.
• Engaging with clients and coordinating project execution.
• Coordinating with various teams for installation, testing, and commissioning.
• Managing third-party engineers and workforce to meet deadlines.
• Supervising site completion and pre-commissioning tasks.
• Leading Testing and Commissioning, troubleshooting issues.
• Participating in routine meetings with stakeholders.
• Maintaining communication with Project and Engineering Managers.
• Identifying project variation opportunities and initiating RFIs.
• Creating FAT/SAT documents and providing training.
• Maintaining site reports and ensuring HSE and QA/QC compliance.

Position: Electrical Engineer

Company Name: Cegelec Qatar WLL
Location: Dukhan, Qatar
Duration: 10th Oct. 2014 – 26th Oct. 2015
Responsibilities: -
• Evaluate Technical Documentation from Electrical (MV & LV) Sub-Contractors for approval.
• Review shop drawings to ensure they meet standards and project requirement.

Page 3 of 5
Internal
 • Collaborate with the Consultant for document approval.
• Conduct material and site inspections, compiling reports.
• Issue NCR for non-compliant work.
• Lead Testing and Commissioning, troubleshoot and resolve issues.
• Attend routine meetings with Customers, Consultants, and Contractors.
• Collaborate with Civil and Mechanical Contractors for project efficiency.
• Initiate Request for Information (RFI) process proactively.
• Maintain site reports in approved formats.
• Ensure full compliance with HSE and QA/QC requirements across all tasks.

Position: Electrical Engineer

Company Name: Safari Company Limited
Location: Jeddah, Saudi Arabia
Duration: 10th Dec. 2012 – 27th Aug. 2014
Responsibilities: -
• Pre-project assessment for design coherence and alignment with specifications.
• Evaluation of technical documentation from electrical vendors.
• Review shop drawings to ensure they meet standards and project requirement.
• Supervising a project team and system specialists for the execution of the project.
• Engaging with Consultants/Clients and maintaining coordination.
• Managing project timelines and workforce.
• Leading testing and troubleshooting on-site issues.
• Participating in routine meetings with stakeholders.
• Keeping project managers informed of progress and changes.
• Identifying opportunities for project variations.
• Implementing Request for Information (RFI) process.
• Maintaining records and ensuring compliance with HSE and QA/QC requirements.

Position: Site Engineer

Company Name: Honeywell Automation India Limited (Payroll -Microsystems)
Location: Mumbai, India
Duration: 12th Aug. 2009 – 17th Nov. 2012
Responsibilities: -
• Managed the Installation, Testing, and Commissioning of ELV/Low Current Systems.
• Review shop drawings to ensure they meet standards and project requirement.
• Orchestrated integration with other MEP Systems.
• Led material quantity assessments, estimates, surveys, and design efforts.
• Ensured work accuracy according to specified drawings and scope.
• Generated internal progress reports for the Team Lead.
• Coordinated site activities including material reception and QA/QC approval.
• Facilitated tool and accessory approvals, ensuring fitness tags were up to date.
• Oversaw installation of First Fix and Second Fix for ELV systems, obtaining Consultant
approval.
• Initiated the Request for Information (RFI) process to avoid costly corrective actions.
• Prepared cost variation documents and coordinated with the Main Contractor for approval.
• Generated detailed reports per client requests and actively participated in weekly progress
meetings.
• Maintained strict compliance with EHS regulations and QA/QC policies throughout all tasks.

Page 4 of 5
Internal
 Personal Details
● Marital Status - Married
● Nationality - Indian
● Religion - Islam
● Date of Birth - 02nd Nov. 1984
● Place of Birth - Mumbai, Maharashtra, India
● Languages Known - English, Hindi, Urdu, Marathi

Passport Details
● Passport Number - V8537678
● Place of Issue - Doha, Qatar
● Date of Issue - 08th Mar. 2022
● Date of Expiry - 07th Mar. 2032
● Old Passport No. - K6987567

Declaration
● I hereby declare that all the details given above are true.
● I assure that I will abide by the rules of the organization and be sincere and truthful in my duty.
● Further documents will be available on request.

Yours Faithfully

Mohammed Hamid Qamruddin Khan

Page 5 of 5
Internal
 ١٩- ‫ﺷﻬﺎدة ﺗﻄﻌﻴﻢ ﺿﺪ ﻓﻴﺮوس ﻛﻮروﻧﺎ ﻛﻮﻓﻴﺪ‬
COVID-19 Vaccination Certificate

Name: MOHAMMED HAMID QAMRUDDIN KHAN :‫اﻹﺳﻢ‬

Date of Birth (DD-MM-YYYY): 02-11-1984 :(DD-MM-YYYY) ‫ﺗﺎرﻳﺦ اﻟﻤﻴﻼد‬

1 9- ‫ ﻛﻮﻓﻴﺪ‬- ‫ اﻟﻤﺮض اﻟﻤﺴﺘﻬﺪف‬:‫ﺗﻠﻘﻰ اﻟﻤﺬﻛﻮر أﻋﻼه ﺟﺮﻋﺎت اﻟﻠﻘﺎح اﻟﺘﺎﻟﻴﺔ ﻟـ‬

The above mentioned has received the following vaccine doses for: Disease Targeted - Covid-19

‫رﻗﻢ‬ ‫ﺗﺎرﻳﺦ اﻟﻠﻘﺎح‬ :‫ﺑﻠﺪ اﻟﺘﻄﻌﻴﻢ‬

‫اﻟﺠﺮﻋﺔ‬ ‫ﻣﺤﺘﻮى اﻟﻠﻘﺎح‬ ‫اﺳﻢ اﻟﻠﻘﺎح‬ ‫اﻟﺸﺮﻛﺔ اﻟﻤﺼﻨﻌﺔ‬ Date of
‫اﻟﺤﺰﻣﺔ‬ Country of
Dose Vaccine Vaccine Product Manufacturer Vaccination
Lot # Vaccination
(DD-MM-YYYY)

SARS CoV-2 mRNA Pfizer BioNTech / BioNTech Manufacturing

1 of 2 EX3546 03-05-2021 Qatar
Vaccine Comirnaty GmbH

SARS CoV-2 mRNA Pfizer BioNTech / BioNTech Manufacturing

2 of 2 FA5742 26-05-2021 Qatar
Vaccine Comirnaty GmbH

SARS CoV-2 mRNA Pfizer BioNTech / BioNTech Manufacturing

3 FG3530 10-01-2022 Qatar
Vaccine Comirnaty GmbH

Dr. Hamad Eid Al-Romaihi ‫اﻟﺪﻛﺘﻮر ﺣﻤﺪ ﻋﻴﺪ اﻟﺮﻣﻴﺤﻲ‬

Manager of Health Protection and Communicable ‫ﻣﺪﻳﺮ ﺣﻤﺎﻳﺔ اﻟﺼﺤﺔ وﻣﻜﺎﻓﺤﺔ اﻷﻣﺮاض‬
Diseases
‫اﻻﻧﺘﻘﺎﻟﻴﺔ‬
Public Health Department
‫إدارة اﻟﺼﺤﺔ اﻟﻌﺎﻣﺔ‬
P.O. Box – 42, Doha – Qatar
‫ ﻗﻄﺮ‬،‫ – اﻟﺪوﺣﺔ‬42 .‫ب‬.‫ص‬

.‫ ﻗﻄﺮ‬،‫ﻫﺬه اﻟﺸﻬﺎدة ﻫﻲ وﺛﻴﻘﺔ رﺳﻤﻴﺔ ﻣﻮﻗﻌﺔ رﻗﻤ ﻴ ًﺎ وﺻﺎدرة ﻋﻦ وزارة اﻟﺼﺤﺔ اﻟﻌﺎﻣﺔ – اﻟﺪوﺣﺔ‬
This certificate is an official document that is digitally signed and issued by the
Ministry of Public Health, Doha, Qatar.