Computer Modeling in

Engineering & Sciences

Tech Science Press

DOI: 10.32604/cmes.2023.029910

ARTICLE

A Hybrid Classification and Identification of Pneumonia Using African

Buffalo Optimization and CNN from Chest X-Ray Images

Nasser Alalwan1, *, Ahmed I. Taloba2 , Amr Abozeid3 , Ahmed Ibrahim Alzahrani1 and
Ali H. Al-Bayatti4
1
Computer Science Department, Community College, King Saud University, Riyadh, 11437, Saudi Arabia
2
Information System Department, Faculty of Computers and Information, Assiut University, Assiut, Egypt
3
Mathematics Department, Faculty of Science, Al-Azhar University, Cairo, Egypt
4
Cyber Technology Institute (CTI), De Montfort University, Leicester, UK
*Corresponding Author: Nasser Alalwan. Email: [email protected]
Received: 14 March 2023 Accepted: 01 August 2023 Published: 15 December 2023

ABSTRACT
An illness known as pneumonia causes inflammation in the lungs. Since there is so much information available
from various X-ray images, diagnosing pneumonia has typically proven challenging. To improve image quality and
speed up the diagnosis of pneumonia, numerous approaches have been devised. To date, several methods have been
employed to identify pneumonia. The Convolutional Neural Network (CNN) has achieved outstanding success in
identifying and diagnosing diseases in the fields of medicine and radiology. However, these methods are complex,
inefficient, and imprecise to analyze a big number of datasets. In this paper, a new hybrid method for the automatic
classification and identification of Pneumonia from chest X-ray images is proposed. The proposed method (ABO-
CNN) utilized the African Buffalo Optimization (ABO) algorithm to enhance CNN performance and accuracy. The
Weinmed filter is employed for pre-processing to eliminate unwanted noises from chest X-ray images, followed
by feature extraction using the Grey Level Co-Occurrence Matrix (GLCM) approach. Relevant features are then
selected from the dataset using the ABO algorithm, and ultimately, high-performance deep learning using the
CNN approach is introduced for the classification and identification of Pneumonia. Experimental results on
various datasets showed that, when contrasted to other approaches, the ABO-CNN outperforms them all for the
classification tasks. The proposed method exhibits superior values like 96.95%, 88%, 86%, and 86% for accuracy,
precision, recall, and F1-score, respectively.

KEYWORDS
African buffalo optimization; convolutional neural network; pneumonia; X-ray

1 Introduction
Pathogens including viruses, bacteria, and fungus can bring on lung infection known as pneu-
monia. Everyone can experience it, including healthy and young individuals. Children, individuals
with various illnesses, individuals with compromised immune systems, older people, individuals
hospitalized and have been put on ventilation, individuals with chronic illnesses like asthmatic, and
smokers face life-threatening situations [1]. The consequences of viral pneumonia develop more

This work is licensed under a Creative Commons Attribution 4.0 International License,
which permits unrestricted use, distribution, and reproduction in any medium, provided the
original work is properly cited.
2498 CMES, 2024, vol.138, no.3

progressively. However, diagnosis may be challenging if bacterial illness and viral pneumonia appear
simultaneously. The consequences of bacterial pneumonia, on the other hand, might present steadily or
even abruptly, particularly in youngsters, and are more serious [2]. This pneumonia damages a sizable
portion of the lungs and can potentially spread to several lung lobes. A patient has to be hospitalized
if many lung lobes are impacted. Fungal pneumonia seems to be another type of pneumonia that
can affect those with weakened immune systems. The patient needs time to recover from this sort of
pneumonia, which has the potential to be deadly [3]. Research must be conducted to reduce child
mortality in underdeveloped countries, and new techniques must be developed quickly.
Chest radiography analysis is necessary for illness diagnosis and therapy in medicine. Following
the Centre for Definitive and Curative Medicine (CDCM), around 1.8 million US adults receive
hospital treatment yearly for pneumonia, and approximately 60,000 Americans died in 2016 [4].
Chronic obstructive pulmonary disease is the main cause of death in the USA; by 2021, this number is
expected to rise. According to the World Health Organization (WHO), it is among the main reasons
for death for children under the age of five globally, killing approximately 1.5 million, or roughly 19%
of all pediatric fatalities globally. More than 90% of all new pediatric pneumonia diagnoses occur
in developing nations with limited access to healthcare. Therefore, creating affordable and reliable
pneumonia diagnoses is necessary [5].
Clinicians use various imaging techniques, such as computerized tomography, and chest X-rays,
to detect pneumonia. A chest radiograph is the most commonly utilized technology for detecting
pneumonia globally because of its minimal price and accessibility [6]. One of the most complicated jobs
confronted by research groups is classifying pneumonia’s subcategories: Viral Pneumonia (VP) and
Bacterial Pneumonia (BP), where VP demands emotional support and various medication processes
for rehabilitation while BP necessitates antibiotics treatment. Radiologists with the appropriate
training have historically classified and identified pneumonia [7]. Because pneumonia may sometimes
be undetected by the human eye in situations referred to as false positives, it is highly usual for
radiologists to make a mistake. In other instances, radiologists could declare an individual to have
pneumonia when they do not. However, people need specialized expertise and knowledge to correctly
examine X-ray images. Because of this, diagnosing pneumonia by viewing X-ray images can be
laborious and inaccurate. The cause is that several different medical diseases, like lung cancer, too
much fluid, etc., can produce comparable image opacities [8]. Consequently, it is quite essential to
analyze images accurately. The ability of computers to perform complex calculations is well known,
and creating a model for identifying pneumonia causes in clinical imaging can help in the more
precise interpretation of X-ray images. For radiology professionals, X-ray image processing is one
of the most time-consuming and important responsibilities. To evaluate X-ray images, academics
have suggested several computer techniques. Additionally, several computer-assisted diagnostic tools
have been created to offer an understanding of X-ray images [9]. The aforementioned information
clarifies that creating affordable and reliable pneumonia diagnoses is necessary. Therefore, to make
the pneumonia diagnosis procedure simpler, a deep learning technique was created in this study.
Deep learning research on illness detection and prediction has lately been intensively pursued in
Computer-Assisted Diagnosis (CAD) and has shown promising results in several medical specialties.
In medicine, especially radiology, it was effective [10]. Although CAD cannot take the position of
medical specialists, it could be employed as an adjunct tool to help them save energy and time. Instead
of being applied to diagnose pneumonia, computer-aided diagnosis can enhance the reliability and
accuracy of a special diagnosis when utilized as a decision support system. The major processes in
CAD systems include image pre-processing, identifying areas of interest and associated characteristics,
and classifying the illness based on its characteristics. Rapid advancements in machine learning create
new possibilities for developing CADs powered by artificial intelligence (AI) in healthcare settings
CMES, 2024, vol.138, no.3 2499

[11]. The primary factor influencing Deep Learning’s (DL) great performance is neural networks’
aptitude for understanding high-level abstraction from supplied raw input through a learning process
[12]. In conclusion, DL is a popular study area since it can classify chest abnormalities by automatically
learning the image attributes [13].
Modern deep-learning algorithms can analyze and segment images with human-level accuracy.
One of the most widely recognized areas where deep learning may be quite useful is the medical sector,
particularly in imaging [14,15]. With all those developments, deep learning has become a significant
force in the medical sector. To develop decision support for the assessment of an individual’s health,
deep learning can be used in a wide range of fields, including the detection of diseases and nodules,
the evaluation of digital information related to health, and narcotic consumption, environmental
acknowledgment, and brain-computer functionality [16]. The capacity of the neural networks to
acquire high-level abstraction from raw which is given as input data through a special-purpose learning
technique is the crucial factor that determines the success of deep learning. Fig. 1 represents the
different categories of pneumonia.

Figure 1: Pneumonia’s different categories and subcategories

2500 CMES, 2024, vol.138, no.3

The technique of choice for analyzing medical images is deep learning. The use of deep learning
for object recognition, segmentation, and categorization is thoroughly examined in this work. It also
focuses on research into deep learning-based segmentation and diagnosing techniques for pneumonia.
Various methods have been used to diagnose pneumonia up to this point. These methods are ineffective
and inaccurate in handling numerous datasets. There is a need for a solution because the earlier
strategies did not work to solve these issues. The study aimed to assess how well deep CNN algorithms
identified and classified pneumonia on X-ray images. In this article, the artificial intelligence-based
CNN approach is utilized.
The contributions of the research are as follows:
• Apply a sophisticated weinmed filter model to remove undesired noise from the patients’ chest
X-ray images.
• Perform segmentation using Otsu thresholding, which separates the image into different
regions. Then, apply the Grey Level Co-Occurrence Matrix (GLCM) method to extract features
from the segmented images.
• Propose the African Buffalo Optimization-Convolutional Neural Network (ABO-CNN) model
to classify the affected and unaffected regions in the chest X-ray images. The ABO-CNN model
utilizes the ABO algorithm to select relevant features from the dataset, which are then used to
optimize the ABO-CNN training.
The remaining sections are arranged as follows: The literature study is covered in Section 2, the
suggested ABC-CNN methodology is discussed in Section 3, the results and discussion are presented
in Section 4 with tables and graphs, and the proposed strategy is concluded in Section 5.

2 Related Work
The methodology for identifying pneumonia in chest X-ray images employing Earth Mover’s
Distance (EMD) was suggested by Khatri et al. [17]. The prevalent chronic illness known as pneumonia
causes a person’s alveoli to swell with fluids and have a hazy appearance. Clinicians still have trouble
accurately identifying patients and determining the degree of their infection. The study demonstrates
how to utilize EMD to distinguish between normal, non-infected lungs and pneumonia-infected lungs.
The EMD is the separation among two probabilities distribution over a given region D. To create a
set of lung X-rays with a consistent size and shape; researchers pre-processed the images to exclude
everything except the images of the lungs. Next, they performed basic resizing, rotations, and intensity
normalization. Lastly, they computed EMD and compared the findings. However, fine-tuning the
created system can aid in improving the accuracy of the finding [17].
Chandra et al. utilized the machine learning paradigm to recognize pneumonia in chest images
[18]. The internationally recognized standard for analyzing pulmonary disorders is chest radiography.
The study describes a Machine Learning (ML) framework for the automated identification of
pneumonia in segmented lungs. The characteristics of the segmented lung Region of Interest (ROI)
limited areas are retrieved because the study concentrates on pixels in the segmented lung ROI that
are significantly more helpful towards pneumonia identification than the nearby areas. Utilizing
benchmarked classifiers, the effectiveness of the new technique is contrasted with the conventional
strategy. The employed technique outperformed the current strategy, according to experimental data.
Moreover, the strategy requires thorough testing on thousands of real-world test cases and more
dependable characteristic analysis tools.
CMES, 2024, vol.138, no.3 2501

The effectiveness of ML classification algorithms for Pneumonia Diagnosis in chest X-ray images
is examined by Al Mamlook et al. [19]. One of the major illnesses that might have devastating
repercussions quickly is pneumonia, which is brought on by an infection of the lungs. Early recognition
is necessary for a successful course of therapy [19]. The research aims to create a framework that will
aid in categorizing chest X-ray images into normal and pathological conditions. The paper presents
the deep learning approach for the classification problem, developed on changed images using several
pre-processing processes. Experimental findings revealed that, when contrasted with the seven machine
learning approaches, the deep learning methodology performs the best for the categorization task.
However, gathering X-ray images from medical facilities with big data for training and testing the
algorithm could forecast outcomes more accurately.
Viral Pneumonia Diagnosis on Chest X-Ray Utilizing Confidence-Aware Anomaly Detection
was proposed by Zhang et al. [20]. Short-term clustering of viral pneumonia cases might indicate a
pandemic or epidemic. Chest X-rays could be a valuable tool for the precise and quick diagnosis of viral
pneumonia during mass screenings for epidemic management, especially since more advanced imaging
techniques are not widely available. Furthermore, the appearance of a new viral mutation results in a
significant dataset change, significantly reducing the effectiveness of categorization methods. The goal
of distinguishing between viral pneumonia, non-viral pneumonia, and normal subjects was presented
in the study as a one-class categorization anomaly detection issue. As a result, researchers suggest
confidence-aware detection techniques, which combine an anomalous detection module, a confidence
forecast module, and a common feature extractor. The main benefit of the method over binary
classification is that all confirmed instances of viral pneumonia are treated as an anomaly to enhance
the one-class system without explicitly modeling distinct viral pneumonia categories. Techniques for
binary classification are outperformed by the suggested method but the fast negative rate is higher
which decreases the false positives of the method [20].
A deep feature selection technique utilizing local search and the sine cosine algorithm was
presented by Chattopadhyay et al. to identify pneumonia from lung X-ray images [21]. Children under
the age of five worldwide commonly die from pneumonia. Although radiological examinations—
typically X-ray scans—are performed to identify pneumonia, they are subject to subjective variation
and may result in discrepancies between radiologists. Hence, a much more reliable technique is needed
to identify signs of pneumonia from X-ray images. Using deep learning and optimization techniques,
researchers create two-stage architecture in the study that is both precise and quick. The suggested
framework utilizes a customized DenseNet-201 deep learning model in its initial phase to extract
the features to deal with the limited information available. In the second phase, researchers use an
enhanced sine-cosine algorithm and an adaptable beta hill climbing-based local search strategy to
minimize the characteristics dimensions. Utilizing a Support Vector Machine (SVM) classifier, the
optimized feature subset is applied to categorize “Pneumonia” and “Healthy” X-ray images. The
suggested approach shows the maximum accuracy after being tested on a publicly accessible data set.
Still, somehow it necessitates a great deal of effort and a huge number of datasets.
Pneumonia Identification in Chest X-Ray Image Utilizing an Enhanced Restricted Boltzmann
Machine (RBM) was proposed by Wahid et al. Studies have concentrated on the pneumonia detection
procedure since it has emerged as one of the most serious diseases that can be fatal [22]. However,
none have been particularly effective in achieving the greatest accuracy. In a related effort, researchers
suggest an improved variant of the limited Boltzmann machine, the enhanced RBM. The randomized
weight initialization utilized in the typical RBM format is one of the main downsides since it causes
the model to understand its features improperly during the training phase, which harms the machine’s
effectiveness. The study attempts to solve this issue by identifying discrepancies between the means of
2502 CMES, 2024, vol.138, no.3

a particular characteristic vector and the mean of all characteristics supplied to the machine as input.
The procedure increases the rebuilding of the real features, eventually minimizing the error produced
during the model’s training stage. Consequently, a considerable improvement in the RBM’s operation
has been seen by employing a novel way of weight initialization during the training stage. Moreover,
it does not apply to many dataset formats.
Ayan et al. utilized Deep Learning to diagnose pneumonia from chest X-ray images [23]. A
bacterial infection is the source of lung illness known as pneumonia. For the therapy procedure to
be effective, an earlier diagnosis is essential. Typically, a skilled radiologist can identify the illness
from chest X-ray scans. Computer-aided diagnostic systems are therefore required to direct the
physicians. Researchers employed the well-known convolutional neural network models Vgg16 and
Xception to diagnose pneumonia. In the training phase, researchers applied fine-tuning and transfer
learning. The Xception network, however, had better effectiveness in identifying pneumonia infections.
Consequently, researchers discovered that every network on the same dataset had unique specific
skills. The technology will produce more accurate findings for identifying pneumonia by merging the
characteristics of two or more networks.
CNN was employed by Sharma et al. to identify and categorize characteristics from chest X-ray
images to recognize pneumonia. If not treated promptly, pneumonia is an illness that inflames the
lungs. Chest X-rays frequently detect pneumonia; a specialist must carefully examine these images.
Having a professional diagnose pneumonia utilizing chest X-ray images is less precise and time-
consuming. Researchers suggest several deep convolution neural network structures in the research.
Researchers train the suggested CNNs utilizing both the initial and the enhanced dataset, and
the outcomes are presented to assess the effect of dataset size on the effectiveness of CNN. The
classification accuracy of the suggested CNN architecture will increase as it incorporates various
optimization techniques and other data augmentation approaches [24].
For detecting pneumonia utilizing chest X-rays, Rahman et al. employed Deep CNN and Transfer
Learning [25]. Lung infections from either bacteria or viruses can produce the potentially fatal
condition known as pneumonia. Early recognition of pneumonia is crucial since it can be life-
threatening if not treated. The article uses digital X-ray images to automatically identify bacterial and
viral pneumonia. It gives a thorough report on improvements in the timely identification of pneumonia
before outlining the researcher’s approach. In preparation for the classification job based on transfer
learning, the chest X-ray images of bacteria, viruses, and normal tissue were pre-processed and trained.
The article presents three categorization schemes: bacterial pneumonia vs. viral pneumonia, normal,
pneumonia vs. viral pneumonia, and bacterial pneumonia. The suggested approach achieves more
precision. As a result, the planned research may aid in the quicker diagnosis of pneumonia by the
radiologist whereas the proposed approach takes a lot of time to process the data.

3 Methodology
For the study, images from a chest X-ray collection that includes normal and pneumonia images
were made available to the public. Preprocessing is done on the dataset, and training, validation, and
test sets are created. Weinmed filter is used for preprocessing, and Otsu thresholding is subsequently
used for segmentation. The relevant characteristics are chosen using GLCM, and the CNN model
is optimized utilizing the ABO algorithm, which takes its cues from the social behavior of African
buffalos. The algorithm’s parameters are specified, including the population size, maximum iteration,
and search space. Convolutional, pooling, and fully connected layers are only a few of the layers that
make up a CNN model. The architecture is chosen using data from earlier research and testing. The
CMES, 2024, vol.138, no.3 2503

model’s effectiveness is assessed using common assessment measures including accuracy, sensitivity,
specificity, precision, and F1-score.
Fig. 2 depicts the recommended approach. In the research, a CNN based on African Buffalo
Optimization is used. For training and testing, several datasets are supplied into the system. The
Weinmed filter is then used during pre-processing to remove unwanted noises from the images that
have already undergone processing. Accordingly, pneumonia and its types are classified using the
recognized ABO-CNN technique. A sophisticated African Buffalo Optimization-based CNN achieves
a higher precision value. As a result, the technique used considers and classifies pneumonia.

Figure 2: The proposed ABO-CNN model

3.1 Pre-Processing
To produce an image with noticeable graphical clarity, pre-processing is used. One of the most
typical noises that images encounter is salt and pepper noise, which complicates the detecting process.
A global and local analysis-based classification process is proposed to identify the affected regions
precisely. In contrast to a global analysis, which looks at the image’s color characteristics, a local
analysis contrasts the image’s brightness and sharpness. Noise is any occurrence of unexpected
indicators and inconsistency in the brightness and hue of the image. It is essential to remove the noises
because the particles would degrade the image quality. To minimize the noise in the images, a hybrid
filter termed the Wienmed filter—a blend of the Wiener and median—is utilized in this study. The
median filter will recover each pixel’s grey level and is particularly good at eliminating spiky noises
while maintaining the image’s sharp edges. On the contrary, the wiener filter uses a linear filter to blur
the noise in the image. Therefore, it is proven to be quite successful in combining the median and wiener
2504 CMES, 2024, vol.138, no.3

filters used in this paper. To achieve a higher image quality, it is necessary to eliminate the changed
pixels from the surrounding area. As a result, the ABO-CNN model for identifying pneumonia uses
the produced noise-free images. The chest X-ray images before and after pre-processing are shown in
Fig. 3.

Figure 3: Architecture of CNN

The wiener filter mathematical formula is given in Eq. (1).

w (c, d) = σ 2 [n − a (c, d)] (1)

Here the variance of Gaussian noise is denoted by σ 2 , c and d are pixel dimensions of each image,
n is the noise features.
The median filter equation is given in Eq. (2).
ĝ (e, f ) = median(p,q)∈Tef {f (p, q)} (2)

Here f (p, q) remaining pixel after removal.

The combined formula of the proposed Wienmed filter is in Eq. (3).
ĝ (e, f ) = median(p,q)∈Tef {w (c, d)} (3)

Here c and d are the pixel dimensions of each image. The notation a indicates each image.

3.2 Segmentation
It appears that segmentation is a key element that directly influences the categorization result.
A subpar segmentation could result in a subpar categorization. Even though the research does not
produce good results, it is the best classifier ever reported. A correct segmentation will surely enable us
to achieve the acceptable performance of the classifier even with a very basic classifier [26]. This study
does not need a complex method to segment the information as it eliminated all sorts of noise by pre-
processing with the un-sharp filter. The damaged area must be segregated from the nearby healthy area
to identify and produce an accurate categorization. The fundamental technique for segmenting images
was thresholding. As a result, Otsu Thresholding was used in this study to describe the foreground and
background images using a distribution. Eq. (4) carried out this procedure.
σv2 = Wa σa2 + Wg σg2 (4)
CMES, 2024, vol.138, no.3 2505

where Wa stands for the weight of the background image, σa2 for the variance of the background,
Wg for the weight of the foreground image, and squared for r the variance of the foreground. This
method allows researchers to pinpoint the pixels that help compensate for an image’s foreground and
background and evaluate how many of those are overall to those in the foreground and background.
The average and variance of the corresponding background and foreground are then calculated. The
weight and variation were then used to calculate the different thresholding level values.

3.3 Feature Extraction

Making a specific feature extraction from attributes is the main challenge in image processing.
Design, contents, and image recognition are the fields of image processing that involve feature extrac-
tion. Shape, color shift, disparity, group outgrowth, the connection among areas, etc. are potential X-
ray features. The goal of feature extraction in image processing is to lessen computational complexity
by removing pointless and unneeded properties. The feature extraction technique determines the
characteristics of the images using microanalysis and macroanalysis. The quirky dataset’s original data
is converted into digital characteristics during feature extraction without even being changed, and it
is then classed based on its pixel content.
The Grey Level Co-Occurrence Matrix (GLCM) is employed in feature extraction. The frequency
with which a set of pixels with specific values and spatial connections appear together in an image is
taken into account by the GLCM factor to account for the pattern of the image.
Energy: The total of squares in an image that regularly has higher grayscale values and directly
has an unstable quality is referred to as energy. Calculating the energy of the supplied data is Eq. (5).
 
E= {M (a, b)}2 (5)
a b

The images are designated as M and the image squares with a grey level are labelled as (a, b).
Contrast: Using features, the regional contrast of an image is calculated, and it is predicted to be
low at even beginning concentration. The original image’s entire grayscale quality is then projected by
Eq. (6), followed by the contrast.
 Iq Iq Iq 
C= y2 M (a, b) (6)
y=0 a=1 b=1

I stand for an image’s grayscale, M for an image, and (a, b) for an image’s grayscale square.
Correlation: The linear dependence of grey value on pixels and the numeric relationships between
the parts can be considered using the correlation features in Eq. (7).
 
(a, b) M (a, b) − μc μd
Co = a b (7)
σc σd
The standard deviation and mean in the row and column are represented as μc, μd, σc and σd .
Entropy: Entropy stands out in Eq. (8), which is depicted as the predicted increased value of the
uncertainty of the dispersion of grey levels.
 
En = − M (a, b) log (M (a, b)) (8)
a b

3.4 Feature Selection

The value of characteristics in the image analysis is produced during feature selection, which may
start with desired data and is typically connected to reduced dimensionality. To select features and
2506 CMES, 2024, vol.138, no.3

generate additional properties, the training data is converted and the relevant features are selected using
African Buffalo Optimization (ABO) algorithm. The primary goal of feature selection was to decrease
the original datasets using various attributes and features. It highlights how image patterns interact
with other patterns. The features selected from the X-ray image are the minimum intensity, intensity
slope, maximum intensity, standard deviation, mean gradient, median intensity, mean curvature, and
mean intensity.
African Buffalo Optimization Algorithm (ABO)
To improve classification accuracy, the major goal of feature selection is to exclude these kinds
of characteristics. The ABO feature selection model analyses the feature set to decrease the number
of features while concurrently increasing classification accuracy. This study used the ABO algorithm
because there weren’t many studies that used it for feature selection. The African buffalo’s ability is
modernized by their location of seeking in the African Buffalo Optimization mechanism. Buffalos are
often gathered by their “waa” and “maa” sounds, which are also employed to identify their location.
Additionally, the learning aspects will assist in the mobility of the buffalo. The letters un and pn
represent the sounds waa and maa, respectively. Through the formula, collaborative efficiency is clearly
defined in Eq. (9).
pn + 1 = pn + le1 (ce max − un) + le2 (cd max n − un) (9)
where, pn and un stand for the nth buffalo’s an exploration and exploitation movements, respectively
(n = 1,2, 3, . . . , N). The variables for learning are le1 and le2. In Eq. (9), Cemax is the group with the
best fitness, and cdmaxn is the fitness of a single buffalo.
Utilizing Eq. (10), update the location of the buffalo n (cemax and cdmaxn).
un + 1 = 2 (un + pn) (10)

Algorithm: ABO-CNN mechanism

Input: Chest X-ray images
Output: Detection of pneumonia from the chest X-ray images
Load input image data
I = {I1 , I2 , I3 . . .} // data acquisition
Pre-processing of images // wienmed filter
ĝ (e, f ) = median(p,q)∈Tef {w (c, d)}
Segmentation of images // Otsu Thresholding
Feature selection // African Buffalo Optimization
The initial portion of the impacted region is found using Eq. (9)
if (the first location is met)
Gather the subset
The fitness of the buffalo is updated using Eq. (6) to find the next impacted region
Else
The first portion is found
Repeat until an ending criterion is met // until every impacted area has been located
end if
Return
Categorization of Pneumonia //CNN Classifier
CMES, 2024, vol.138, no.3 2507

In Eq. (9), there are three main components: (pn + 1) the recall part, in which the animals
pay attention to being moved from their former location (pn). Broad memory ability is shown
in their wandering behavior, an important tool for buffalos. The collaborative qualities of buffalo
le1 are represented in the following section (cemax-un). Buffalos can trail the locations and are
effective communicators in every repetition. The final equation, le2, highlights the buffaloes’ superior
intelligence (cdmaxn-un). They can contrast their present role to their old, most productive job.

3.5 Classification Using CNN

Visual data that displays human emotion is categorized using Convolution Neural Network
(CNN) classifiers. It analyses graphical images and eliminates any unnecessary elements with the
assistance of its multiple co-designs. Before CNN training, image pixel values fell inside the dataset’s
bounds. CNN is the network that advances the greatest during training. If possible, the input images
should all be the same size. The formula in Eq. (11) was used to normalize all of the images from the
training set.
o (x, y) − μ
p (x, y) = (11)
σ
3.5.1 Convolutional Layer
The convolution layer uses the scant number of input images it has gathered to assess the difficulty
of each layer. It most obviously relates to the characteristics depicted in the original images. The
mathematical formulation of the convolutional layer is given in Eq. (12).
 
frn = a fjn−1 ∗ pnsr + anr (12)
s∈Nr

The input options are represented by the number Nx . A cumulative bias is a result. The core was
given to map u if the sum of maps s and k was greater than map r.

3.5.2 Max Pooling Layer

This layer decreases the down-sampling layer’s flexibility and cell size. The pooling layer reduces
the number of parameters, processing speed, convolution layer size, training, and generalization. The
grouping definition shows 50% of the test and 100% of the training data.
angh = nga(s,t)∈ fnst (13)

The map fnst element at (s, t) in the pooling area reflects the area adjacent to the site (g, h).

3.5.3 Fully Connected Layer

The categorization of images has made use of the fully linked layer. The FC layers are placed after
the Convolutional layers. Using the FC layer makes mapping an image between input and output
easier. Fully connected layers make up the system’s top levels.

3.5.4 Softmax Layer

The Softmax layer converts the results into normalized ratio dispersion. The output is fed into
the classifiers as an input. Pneumonia is a feature of the Softmax layer, and the Softmax classifier is a
2508 CMES, 2024, vol.138, no.3

typical participating classifier. It is depicted in Eq. (14).

→ exn
σ X = n x (14)
n
r=1
er
Fig. 4 illustrates the entire flowchart for diagnosing pneumonia using an X-ray image. The X-
ray images are loaded first in the flowchart. After that, the images used as input were trained. The
Weinmed filter is added during the pre-processing stage to remove any undesirable noise from the
image. The segmentation procedure takes advantage of these noise-free images. The segmentation
procedure makes use of the otsu thresholding. The feature extraction employs the suggested African
Buffalo Optimization. To determine the initial impacted region, apply Eq. (9). If the first impacted
region is located, Eq. (10) is used to locate the subsequently affected region. Return to Eq. (9) until
the initially affected region is located if the initially affected region cannot be located. Repeat Eq. (10)
and classify using CNN.

3.6 Evaluation Metrics

3.6.1 Accuracy
The effectiveness of the proposed system throughout all categories is assessed utilizing accuracy.
It is, generally speaking, the notion that every observation would be correctly predicted. The accuracy
is stated in Eq. (15).
TPos + TNeg
Accuracy = (15)
TPos + TNeg + FPos + FNeg

3.6.2 Precision
Precision is determined by counting the precise positive ratings that differ from the total positive
evaluation. You may calculate the exact detection of pneumonia using Eq. (16).
TPos
P= (16)
TPos + FPos

3.6.3 Recall
The recall is the ratio of the total amount of positive samples to the number of real positives
accurately classified as positives. The percentage of predictions made using Eq. (17) to identify
pneumonia is described.
TPos
R= (17)
TPos + FNeg

3.6.4 F1-Score
Calculating the F1-score combines recall and accuracy. Precision and recall determine the F1-
score stated in Eq. (18).
2 × precision × recall
F1 − score = (18)
precision + recall
CMES, 2024, vol.138, no.3 2509

Figure 4: Flow diagram of ABO-CNN model

3.6.5 ROC-AUC Curve

AUC is an abbreviation for Area under the ROC Curve, a popular evaluation metric for binary
classification tasks in machine and deep learning. The AOC calculates the area under the ROC
2510 CMES, 2024, vol.138, no.3

(Receiver Operating Characteristic) curve, a visual representation of a binary classification algorithm’s

performance. The classifier in a binary categorized issue seeks to identify whether the supplied data
belongs to a negative or positive category. The ROC curve compares the TPos to the FPos for various
classification criteria. The AOC is between 0 and 1, with higher numbers indicating more efficiency.
A wholly random classifier has an AOC of 0.5. In contrast, the ideal classifier has an AOC of one
because the algorithm considers all conceivable levels of categorization and provides a single number
for evaluating the efficacy of different classifiers.

4 Results and Discussion

This section contains the experimental findings and explains how well our proposed model
performed. We compare the performance of the proposed ABO-CNN with previously related methods.

4.1 Dataset A
Retrospective cohorts of pediatric patients collected from Guangzhou Women and Children’s
Medical Center, Guangzhou, China [27]. The dataset comprises 5,863 chest X-ray images in JPEG
format, divided into three folders: train, test, and val. The images belong to two categories: Pneumonia
and Normal. They were obtained from pediatric patients aged one to five at Guangzhou Women and
Children’s Medical Center in Guangzhou (“Chest X-Ray Images (Pneumonia) | Kaggle” 2018). The
X-ray scans were conducted as part of routine clinical care, and all images underwent initial quality
control screening to remove low-quality or unreadable scans. Two expert physicians then assessed the
diagnoses for the images, and a third expert reviewed the evaluation set to account for any potential
grading errors. Here are the 8 X-ray samples of pneumonia-affected and normal image samples of
patients in Fig. 5.

Figure 5: X-ray images of pneumonia and normal from KAGGLE

4.2 Dataset B
The second public dataset, which included posteroanterior (PA) chest X-ray images, was classified
into three categories (COVID-19, pneumonia, and normal) [28]. The experiment included a total of
CMES, 2024, vol.138, no.3 2511

6,939 samples, with 2,313 samples from each class as Table 1 shows. Fig. 6 depicts samples from the
dataset, including Normal (Healthy), Pneumonia, and COVID-19.

Table 1: Dataset training and testing sample comparison

Dataset Training Testing Total
Dataset A (Kaggle) 3,520 2,323 5,863
Dataset B (Figshare) 2,313 2,313 6,939

Figure 6: X-ray images of pneumonia and normal from fig-share dataset

4.3 Performance Evaluation

Table 2 represents evaluation metrics for a classification task related to pneumonia and normal
classes. The metrics include precision, recall, and F1-score, commonly used to assess the performance
of a classification model. These metrics provide insights into the performance of the classification
model for distinguishing between pneumonia and normal classes.

Table 2: Performance metrics of the proposed model

Types Precision (%) Recall (%) F1-score (%)
Pneumonia (Class 0) 95 82 88
Normal (Class 1) 76 93 83
Macro avg 85 87 86
Proposed ABO-CNN 99.2 99.62 99.45

Fig. 7 represents a classification model’s performance metrics, specifically for distinguishing

between pneumonia and normal cases. The metrics used to evaluate the model are precision, recall, and
2512 CMES, 2024, vol.138, no.3

F1-score. According to Table 1, the ABO-CNN model achieved a precision of 99.2%, recall of 99.62%,
and F1-score of 99.45%. These values indicate that the ABO-CNN model performed significantly
better than the average metrics obtained from the other approach.

Figure 7: Performance evaluation of the proposed model

Fig. 8 shows the training and validation accuracy of the proposed model and the testing accuracy
and loss are represented in Fig. 9. Table 3 summarizes the performance evaluations of the approaches
using AUC-ROC curves.

Figure 8: Training and validation accuracy

Figure 9: Testing accuracy and loss

CMES, 2024, vol.138, no.3 2513

Table 3: Effectiveness assessments of the methods based on AUC-ROC

Methods ROC-AUC
SVM [29] 0.890
D-CNN [30] 0.988
Proposed ABO-CNN 0.9979

The AUC-ROC scores of the ABO-CNN are larger than those of all other existing models,
according to the test results in Table 2. Fig. 10 gives a comparison of AUC-ROC curves.

Figure 10: Comparison of AUC-ROC curve

4.4 Comparison with the State-of-the-Art Methods

Table 4 presents the performance metrics of different classification models for various research
papers. The SVM model achieved high precision 96.12%, recall 96.96%, accuracy (96.96%), and F1-
score (96.54%). It demonstrates strong performance across all metrics. The stacking classifier model
achieved a higher precision of 98.99% and recall of 99.53% compared to SVM. It also had a high
accuracy of 98.62% and an F1-score of 99.26%. The LBP-CNN model achieved high precision 98.8%,
recall 98.9%, accuracy 98.3%, and F1-score 99.0%. The hybrid deep learning model achieved high
precision 97.29%, recall (97.29%), and F1-score 97.29%. It had a slightly higher accuracy of 98.19%.
These results suggest the effectiveness of combining different deep-learning techniques in this hybrid
model. The proposed ABO-CNN model achieved the highest precision 99.2%, recall 99.62%, accuracy
99.79%, and F1-score 99.45% among all the models. These results indicate the superior performance
of the proposed model in the classification task.
The graph in Fig. 11 compares evaluation metrics (precision, recall, and accuracy) for SVM,
stacking classifier, LBP-CNN, deep hybrid learning and the proposed ABO-CNN methods. The x-
axis of the graph represents the types of models being compared, while the y-axis represents the values
of the evaluation metrics.
Fig. 12 presents a precision-recall curve in the graphical representation of the trade-off between
precision and recall for a binary classification model. It illustrates how the model’s performance varies
as the classification threshold changes.
2514 CMES, 2024, vol.138, no.3

Table 4: Comparison of evaluation metrics with existing methods

Methods Precision (%) Recall (%) Accuracy (%) F1-score (%)
SVM [29] 96.12 96.96 96.96 96.54
Stacking classifier [31] 98.99 99.53 98.62 99.26
LBP-CNN [32] 98.8 98.9 98.3 99.0
Hybrid deep learning model [33] 97.29 97.29 98.19 97.29
Proposed ABO–CNN 99.2 99.62 99.79 99.45

Figure 11: Comparison with the state-of-the-art methods

Figure 12: Precision-recall curve

4.5 Discussion
The experimental results cover several key aspects. Firstly, the dataset used in the research consists
of 5,863 chest X-ray images categorized into Pneumonia and Normal, obtained from pediatric patients
at Guangzhou Women and Children’s Medical Center. The dataset was carefully curated by removing
low-quality or unreadable scans. Next, Figs. 7 and 8 present important findings regarding the training
CMES, 2024, vol.138, no.3 2515

and validation accuracy, as well as the testing accuracy and loss of the model. Fig. 7 illustrates the
improvement in accuracy throughout the training process, giving insights into the learning progress
and the model’s ability to generalize. Fig. 8 provides information on the model’s performance on
unseen data, helping to identify overfitting or underfitting. Then, the study includes a performance
comparison to assess the effectiveness of the proposed ABO-CNN model compared to existing models.
Among all models, the proposed ABO-CNN model had the highest precision 99.2%, recall 99.62%,
accuracy 99.25%, and F1-score 99.45%. These findings demonstrate the suggested model’s higher
performance in the classification challenge.

5 Conclusion
Despite the rapid expansion of image processing in medical technology today, there are some
instances when the diversity of the images makes it difficult to categorize and diagnose diseases. The
affected or damaged component is classified, located, and segmented using the indicated methodology.
Mostly, it concentrates on locating pneumonia. Images of chest X-rays taken of people with various
types of pneumonia are first used to offer information about individuals. A wienmed filter is then
used in the pre-processing stage to remove any undesirable effects or noise from the X-ray images.
The Otsu thresholding technology is applied to segment the affected area. Additionally, the suggested
African Buffalo Optimization is used to extract the attributes during the feature extraction stage, and
a CNN is used to classify pneumonia. High classification and accuracy are also reached with ABO-
CNN. Therefore, this model’s prediction accuracy was 96.95%. The proposed technique will detect
the mandatory features without any supervision of humans and they are faster than Recurrent Neural
Network (RNN). The CNN’s number of parameters is low, decreasing the computational time. Even
though the CNN is very effective, the position and orientation of the objects are not encoded properly.
To offer a more accurate evaluation of pneumonia, the work can be enhanced by improving the size
of the data utilized. Hybrid DL techniques and other transfer learning models can increase efficiency
and give a more accurate evaluation of pneumonia.

Acknowledgement: This work is funded by the Researchers Supporting Project Number (RSP2023
R157), King Saud University, Riyadh, Saudi Arabia.

Funding Statement: This work is funded by the Researchers Supporting Project Number (RSP2023
R157), King Saud University, Riyadh, Saudi Arabia.

Author Contributions: The authors confirm contribution to the paper as follows: study conception and
design: Nasser, Ahmed I. Taloba, Amr, Ahmed Alzahrani; data collection: Nasser, Ahmed I. Taloba,
Amr; analysis and interpretation of results: All Authors; draft manuscript preparation: Nasser, Ahmed
I. Taloba, Amr. All authors reviewed the results and approved the final version of the manuscript.

Availability of Data and Materials: The data that support the findings of this study are available from
the corresponding author upon reasonable request.

Conflicts of Interest: The authors declare that they have no conflicts of interest to report regarding the
present study.
2516 CMES, 2024, vol.138, no.3

References
1. Lanks, C., Musani, A., Hsia, D. (2019). Community-acquired pneumonia and hospital-acquired pneumo-
nia. Medical Clinics, 103(3), 487–501.
2. Stephen, O., Sain, M., Maduh, U. J., Jeong, D. U. (2019). An efficient deep learning approach to pneumonia
classification in healthcare. Journal of Healthcare Engineering, 2019, 1–7.
3. Guo, L., Wei, D., Zhang, X., Wu, Y., Li, Q. et al. (2019). Clinical features predicting mortality risk in patients
with viral pneumonia: The MuLBSTA score. Frontiers in Microbiology, 10, 2752.
4. Agrawal, T., Choudhary, P. (2022). Segmentation and classification on chest radiography: A systematic
survey. The Visual Computer, 1–39.
5. Varshni, D., Thakral, K., Agarwal, L., Nijhawan, R., Mittal, A. (2019). Pneumonia detection using CNN
based feature extraction. 2019 IEEE International Conference on Electrical, Computer and Communication
Technologies (ICECCT), pp. 1–7. Coimbatore, Tamil Nadu, India.
6. Kundu, R., Das, R., Geem, Z. W., Han, G. T., Sarkar, R. (2021). Pneumonia detection in chest X-ray images
using an ensemble of deep learning models. PLoS One, 16(9), e0256630.
7. El Asnaoui, K., Chawki, Y. (2021). Using X-ray images and deep learning for automated detection of
coronavirus disease. Journal of Biomolecular Structure Dynamics, 39(10), 3615–3626.
8. Hammoudi, K., Benhabiles, H., Melkemi, M., Dornaika, F., Arganda-Carreras, I. et al. (2021). Deep
learning on chest X-ray images to detect and evaluate pneumonia cases at the era of COVID-19. Journal of
Medical Systems, 45(7), 75.
9. Murphy, C. N., Fowler, R., Balada-Llasat, J. M., Carroll, A., Stone, H. et al. (2020). Multicenter evaluation
of the BioFire FilmArray pneumonia/pneumonia plus panel for detection and quantification of agents of
lower respiratory tract infection. Journal of Clinical Microbiology, 58(7), e00128–00120.
10. Xu, S., Wu, H., Bie, R. (2018). CXNet-m1: Anomaly detection on chest X-rays with image-based deep
learning. IEEE Access, 7, 4466–4477.
11. Que, Q., Tang, Z., Wang, R., Zeng, Z., Wang, J. et al. (2018). CardioXNet: Automated detection for
cardiomegaly based on deep learning. 2018 40th Annual International Conference of the IEEE Engineering
in Medicine and Biology Society (EMBC), pp. 612–615. Honolulu, HI, USA.
12. Abiyev, R. H., Ma’aitaH, M. K. S. (2018). Deep convolutional neural networks for chest diseases detection.
Journal of Healthcare Engineering, 2018, 1–11.
13. Cha, S. M., Lee, S. S., Ko, B. (2021). Attention-Based transfer learning for efficient pneumonia detection
in chest X-ray images. Applied Sciences, 11(3), 1242.
14. Alalwan, N., Abozeid, A., ElHabshy, A., Alzahrani, A. (2021). Efficient 3D deep learning model for medical
image semantic segmentation. Alexandria Engineering Journal, 60(1), 1231–1239.
15. Miyashita, N., Nakamori, Y., Ogata, M., Fukuda, N., Yamura, A. et al. (2022). Early identification of
novel coronavirus (COVID-19) pneumonia using clinical and radiographic findings. Journal of Infection
Chemotherapy, 28(5), 718–721.
16. Sirazitdinov, I., Kholiavchenko, M., Mustafaev, T., Yixuan, Y., Kuleev, R. et al. (2019). Deep neural
network ensemble for pneumonia localization from a large-scale chest X-ray database. Computers Electrical
Engineering, 78, 388–399.
17. Khatri, A., Jain, R., Vashista, H., Mittal, N., Ranjan, P. et al. (2020). Pneumonia identification in chest X-ray
images using EMD. Trends in Communication, Cloud, and Big Data: Proceedings of 3rd National Conference
on CCB, pp. 87–98. Majitar, India.
18. Chandra, T. B., Verma, K. (2020). Pneumonia detection on chest x-ray using machine learning paradigm.
Proceedings of 3rd International Conference on Computer Vision and Image Processing, vol. 1, pp. 21–33.
Jabalpur, India.
CMES, 2024, vol.138, no.3 2517

19. Al Mamlook, R. E., Chen, S., Bzizi, H. F. (2020). Investigation of the performance of machine learning
classifiers for pneumonia detection in chest X-ray images. 2020 IEEE International Conference on Electro
Information Technology (EIT), pp. 98–104. Naperville, IL, USA.
20. Zhang, J., Xie, Y., Pang, G., Liao, Z., Verjans, J. et al. (2020). Viral pneumonia screening on chest X-rays
using confidence-aware anomaly detection. IEEE Transactions on Medical Imaging, 40(3), 879–890.
21. Chattopadhyay, S., Kundu, R., Singh, P. K., Mirjalili, S., Sarkar, R. (2022). Pneumonia detection from
lung X-ray images using local search aided sine cosine algorithm based deep feature selection method.
International Journal of Intelligent Systems, 37(7), 3777–3814.
22. Wahid, F., Azhar, S., Ali, S., Zia, M. S., Almisned, F. A. et al. (2022). Pneumonia detection in chest X-ray
images using enhanced restricted Boltzmann machine. Journal of Healthcare Engineering, 2022, 1–17.
23. Ayan, E., Ünver, H. M. (2019). Diagnosis of pneumonia from chest X-ray images using deep learning. 2019
Scientific Meeting on Electrical-Electronics & Biomedical Engineering and Computer Science (EBBT), pp.
1–5. Istanbul, Turkey.
24. Sharma, H., Jain, J. S., Bansal, P., Gupta, S. (2020). Feature extraction and classification of chest X-ray
images using cnn to detect pneumonia. 2020 10th International Conference on Cloud Computing, Data
Science & Engineering (Confluence), pp. 227–231. Noida, India.
25. Rahman, T., Chowdhury, M. E., Khandakar, A., Islam, K. R., Islam, K. F. et al. (2020). Transfer learning
with deep convolutional neural network (CNN) for pneumonia detection using chest X-ray. Applied
Sciences, 10(9), 3233.
26. Ben Atitallah, S., Driss, M., Boulila, W., Koubaa, A., Ben Ghezala, H. (2022). Fusion of convolutional
neural networks based on Dempster–Shafer theory for automatic pneumonia detection from chest X-ray
images. International Journal of Imaging Systems Technology, 32(2), 658–672.
27. Giełczyk, A., Marciniak, A., Tarczewska, M., Lutowski, Z. (2022). Pre-processing methods in chest X-ray
image classification. PLoS One, 17(4), e0265949.
28. Asraf, A. (2023). COVID19 with Pneumonia and Normal Chest Xray (PA) Dataset.
https://www.kaggle.com/datasets/amanullahasraf/covid19-pneumonia-normal-chest-xray-pa-dataset
29. Saha, P., Sadi, M. S., Islam, M. M. (2021). EMCNet: Automated COVID-19 diagnosis from X-ray images
using convolutional neural network and ensemble of machine learning classifiers. Informatics in Medicine
Unlocked, 22, 100505.
30. Hou, J., Gao, T. (2021). Explainable DCNN based chest X-ray image analysis and classification for COVID-
19 pneumonia detection. Scientific Reports, 11(1), 16071.
31. Arun Prakash, J., Asswin, C., Ravi, V., Sowmya, V., Soman, K. (2023). Pediatric pneumonia diagnosis using
stacked ensemble learning on multi-model deep CNN architectures. Multimedia Tools Applications, 82(14),
21311–21351.
32. Nneji, G. U., Cai, J., Deng, J., Monday, H. N., James, E. C. et al. (2022). Multi-channel based image
processing scheme for pneumonia identification. Diagnostics, 12(2), 325.
33. Ukwuoma, C. C., Qin, Z., Heyat, M. B. B., Akhtar, F., Bamisile, O. et al. (2023). A hybrid explainable
ensemble transformer encoder for pneumonia identification from chest X-ray images. Journal of Advanced
Research, 48, 191–211.