fp927936684011 Pss en - Us

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Lighting

MASTER PL-S 4 Pin


PL-S 11W/840/4P 1CT/5X10BOX

MASTER PL-S is an efficient low-wattage compact fluorescent lamp, typically used for
decorative and orientation purposes. The original Philips-invented bridge technology
guarantees optimum performance in the application, enabling more light and higher
efficacy than the bended technology. The 4-pin version is designed for operation on
electronic gear and is provided with a plug-in/pull-out lamp base.

Product data

General Information LLMF 12000 h Rated 86 %

Cap-Base 2G7 [ 2G7]

Life to 50% Failures Preheat (Nom) 13000 h Operating and Electrical


LSF Preheat 2000 h Rated 99 % Power (Rated) (Nom) 11.6 W

LSF Preheat 4000 h Rated 98 % Lamp Current (Nom) 0.160 A

LSF Preheat 6000 h Rated 97 %

LSF Preheat 8000 h Rated 92 % Temperature


LSF Preheat 16000 h Rated 30 % Design Temperature (Nom) 28 °C

Light Technical Controls and Dimming


Color Code 841 [ CCT of 4100K (841)] Dimmable Yes

Initial lumen (Nom) 900 lm

Luminous Flux (Rated) (Nom) 900 lm Mechanical and Housing


Color Designation Cool White (CW) Cap-Base Information 4P

Correlated Color Temperature (Nom) 4100 K

Luminous Efficacy (Rated) (Nom) 82 lm/W Approval and Application


Color Rendering Index (Nom) 82 Energy Efficiency Label (EEL) A

LLMF 2000 h Rated 95 % Mercury (Hg) Content (Nom) 1.4 mg

LLMF 4000 h Rated 92 % Energy Consumption kWh/1000 h 13 kWh

LLMF 6000 h Rated 90 %

LLMF 8000 h Rated 88 %

Datasheet, 2018, February 6 data subject to change


MASTER PL-S 4 Pin

Product Data Material Nr. (12NC) 927936684011

Order product name MASTER PL-S 11W/840/4P 1CT/5X10BOX Net Weight (Piece) 41.000 g

EAN/UPC - Product 8711500261229 ILCOS Code FSD-11/40/1B-E-2G7

Order code 251173

Numerator - Quantity Per Pack 1

Numerator - Packs per outer box 50

Warnings and Safety


• Lamp light technical and electrical characteristics are influenced by operating conditions, i.e. lamp ambient temperature and operating
position as well as applied HF control gear
• Shorter lamp life when often switching and not well pre-heated electrodes
• A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove
the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a
vacuum cleaner.
• Lamp contains mercury. Manage in Accord with Disposal Laws. See: www.lamprecycle.org or 1-800-555-0050

Dimensional drawing

D D1 Product D (max) D1 (max) A (max) B (max) C (max)

MASTER PL-S 11W/840/4P 1CT/ 28 mm 13 mm 196 mm 214 mm 219.9 mm

5X10BOX
A
B
C

PL-S 11W/840/4P LM

Photometric data
µW per 5 nm per

500
W per 5 nm per lm

500

400 400

300 300

200 200

100 100

300 400 500 600 700 l nm λ nm


300 400 500 600 700

Lightcolor /840 Lightcolor /840

Datasheet, 2018, February 6 2 data subject to change


MASTER PL-S 4 Pin

Lifetime

100 100
Lamp survival (%)

Lamp survival (%)


90 90
Preheat start
80 80

70 70
Non-preheat start Preheat start Non-preheat start
60 60

50 50
0 3000 6000 9000 12000 15000 0 3000 6000 9000 12000 15000
Operating time (hours) Operating time (hours)

Life Expectancy 3 h cycle Life Expectancy 12 h cycle

100
Lamp luminous flux (%)

90

80

70

60

50
0 3000 6000 9000 12000 15000
Operating time (hours)

Lumen Maintenance 3 h + 12 h cycle

© 2018 Philips Lighting Holding B.V. All rights reserved. Philips Lighting reserves the right to make changes in specifications

and/or to discontinue any product at any timewithout notice or obligation and will not be liable for any consequences resulting www.lighting.philips.com

from the use of this publication. 2018, February 6 - data subject to change

You might also like