CBSE | DEPARTMENT OF SKILL EDUCATION

DESIGN (SUBJECT CODE - 830)

BLUE-PRINT FOR SAMPLE QUESTION PAPER -1 (PRACTICE PAPER-1)
CLASS XII (SESSION 2024-2025)
Max. Time: 2 Hours Max. Marks: 50

PART A - EMPLOYABILITY SKILLS (10 MARKS):

OBJECTIVE TYPE SHORT ANSWER

UNIT QUESTIONS TYPE QUESTIONS TOTAL
NAME OF THE UNIT
NO. QUESTIONS
1 MARK EACH 2 MARKS EACH

1 Communication Skill – IV 1 1 2
2 Self-Management Skills – IV 2 1 3
3 ICT Skills – IV 1 1 2
4 Entrepreneurial Skills – IV 1 1 2
5 Green Skills – IV 1 1 2
TOTAL QUESTIONS 6 5 11
NO. OF QUESTIONS TO BE ANSWERED Any 4 Any 3 07
TOTAL MARKS 1x4=4 2x3=6 10 MARKS

PART B - SUBJECT SPECIFIC SKILLS (40 MARKS):

OBJECTIVE SHORT DESCRIPTIVE/

TYPE ANSWER TYPE LONG ANS. TYPE
UNIT TOTAL
NAME OF THE UNIT QUESTIONS QUESTIONS QUESTIONS
NO. QUESTIONS
1 MARK EACH 2 MARKS EACH 4 MARKS EACH

1. Introduction to Design 9 2 1 12
Design tools and
2. 5 1 1 7
techniques
Occupational health
3. 5 1 1 7
and safety
4. Practical Workshop 5 2 2 9
TOTAL QUESTIONS 24 6 5 35
NO. OF QUESTIONS
20 Any 4 Any 3 27
TO BE ANSWERED
TOTAL MARKS 1 x 20 = 20 2x4=8 4 x 3 = 12 40 MARKS

830 – DESIGN – XII

Page 1 of 8
 CBSE | DEPARTMENT OF SKILL EDUCATION
DESIGN (SUBJECT CODE - 830)
SAMPLE QUESTION PAPER - 1 (PRACTICE PAPER-1)
CLASS XII (SESSION 2024-2025)
Max. Time: 2 Hours Max. Marks: 50

General Instructions:
1. Please read the instructions carefully.
2. This Question Paper consists of 20 questions in two sections: Section A & Section B.
3. Section A has Objective type questions whereas Section B contains Subjective type questions.
4. Out of the given (5 + 15 =) 20 questions, a candidate has to answer (5 + 10 =) 15 questions in
the allotted (maximum) time of 2 hours.
5. All questions of a particular section must be attempted in the correct order.
6. SECTION A - OBJECTIVE TYPE QUESTIONS (24 MARKS):
i. This section has 05 questions.
ii. Marks allotted are mentioned against each question/part.
iii. There is no negative marking.
iv. Do as per the instructions given.
7. SECTION B – SUBJECTIVE TYPE QUESTIONS (26 MARKS):
i. This section has 15 questions.
ii. A candidate has to do 10 questions.
iii. Do as per the instructions given.
iv. Marks allotted are mentioned against each question/part.

830 – DESIGN – XII

Page 2 of 8
 SECTION A: OBJECTIVE TYPE QUESTIONS
Q. 1 Answer any 4 out of the given 5 questions on Employability Skills (1 x 4 = 4 marks)

i. The communication which helps to understand others’ thoughts and feelings: 1

a) Verbal Communication
b) Non-verbal Communication
c) Visual Communication
d) Written Communication

ii. Having conscious knowledge of your own self, capabilities, feelings and one’s own 1
character is called as .
a) Self- Awareness
b) Self- Motivation
c) Self- Regulation
d) Self- Assessment
iii. Which of the following is NOT a physical sign of stress? 1
a) Dry mouth
b) Guilt
c) Fatigue
d) Cold hands
iv. This allows the user to change various settings in a computer: 1
a) Search Box
b) Taskbar
c) Control Panel
d) Recycle Bin

v. Which of the following is the Managerial function of an entrepreneur? 1

a) Idea discovery
b) Planning
c) Detailed investigation
d) Assembling the requirements
vi. One of the best solutions to get rid of non-biodegradable waste is: 1
a) Burning
b) Dumping
c) Recycling
d) Burying

830 – DESIGN – XII

Page 3 of 8
Q. 2 Answer any 5 out of the given 6 questions (1 x 5 = 5 marks)
i. A is a scale down version of a product. 1
a) empathize
b) define
c) ideate
d) prototype
ii. The fabrics made of warp and weft yarns are called . 1
a) Knitted
b) Woven
c) Non- woven
d) Felt
iii. Write full form of term OHS? 1
a) obesity hypoventilation and syndrome
b) overhead hoist and shuttle
c) occupational health and syndrome
d) occupational health and safety.

iv. Which is a raster editing software? 1

a) Illustrator
b) In-design
c) Photoshop
d) Cad-pro

v. In which gestalt’s law we automatically fill in gaps between elements to perceive a 1

complete image?
a) Law of proximity
b) Law of closure
c) Law of similarity
d) Law of figure/ground

vi. consists in imagining and creating objects meant for mass 1

production which encompasses the physical aspects as well as the functionalities
products should possess.
a) Research
b) Product design
c) Casting
d) Molding

830 – DESIGN – XII

Page 4 of 8
Q. 3 Answer any 5out of the given 6 questions (1 x 5 = 5 marks)
i. UCD in design stand for: - 1
a) Under construction daily
b) User centric design
c) Ultrasonic Coagulation Device
ii. This state Gained immense popularity for carving inlaying ivory which is now 1
replaced with plastic to cut down on the cost.
a) Saharanpur
b) Hoshiarpur
c) Kashmir
d) Gujrat
iii. When the newest version of ILO updated? 1
a) 2005
b) 2006
c) 2008
d) 2009

iv. is the use of natural products and energy in a way that does not 1
harm the environment.
a) Agriculture
b) sustainability
c) organic
d) economic

v. This Research tool involves 5 to 10 participants and chaired by an impartial 1

moderator.
a) Focus Group
b) Card Sorting
c) Ethnography – Contextual Enquiry
d) Shadowing

vi. Identify the picture and name the process: 1

a) Ring rolling
b) Roll bending
c) Extrusion
d) Straight bending

830 – DESIGN – XII

Page 5 of 8
Q. 4 Answer any 5 out of the given 6 questions (1 x 5 = 5 marks)
i. It helps the designers in building understanding and gaining knowledge about the 1
product domain, business needs, stakeholders including the end user need, their
context, their aspirations and their experiences that helps us creating user models
such as personas, user needs and how they would like to fulfill their needs,
articulating business goals that may affect features and functions, understanding
technical constraints and limitations.
a) Testing
b) Research
c) Prototype
d) Deliver

ii. Process exploit fluidity of metal in liquid state as it takes shape and solidifies in a 1
mold.
a) Casting
b) Deformation
c) Joining
d) machining

iii. covers any injury, damage or disorder of joints, tissue in upper limb, 1
lower limbs or back.
a) Asthma
b) Drowsiness
c) Musculoskeletal disorder
d) Carcinogenic

iv. Which attribute or quality of a product you will design for visually impaired 1
person?
v. MSDS stands for: - 1
a) Material safety data sheet
b) Material safe delete sheet
c) Material safety document sheet
d) Material safety drawing sheet

vi. The phase of design thinking is getting to know the user and 1
understanding their wants, needs and objectives.
a) Test
b) prototype
c) Empathize
d) define

830 – DESIGN – XII

Page 6 of 8
Q. 5 Answer any 5 out of the given 6 questions (1 x 5 = 5 marks)

i. These are four principles of Design Thinking. One of these is: while technology and 1
Social circumstances may change, basic human needs remain unchanged. Which
Principle is this?
a) The Human rule
b) The redesign rule
c) The ambiguity rule
d) The tangibility rule
ii. Identify the following picture: 1

a) injection molding process

b) plastic extrusion molding process
c) extrusion blow molding
d) blow molding process

iii. The substances used in ply board that may cause respiratory problem including 1
asthma are:
a) formaldehyde and resin
b) styrene vapors
c) dust particles
d) plastic fumes

iv. Which software do you use to make design documents? 1

a) Photoshop
b) Pro 100
c) Illustrator
d) InDesign

v. This thinking focus on finding solutions, coming up with something constructive to 1

tackle the problem:
a) Problem based
b) Solution based
c) Wicked problem
d) Creativity

830 – DESIGN – XII

Page 7 of 8
 vi. design is the design of user interface for machines such as computer, 1
mobile, home appliances with the focus on maximizing usability.
a) Interface design
b) Functional design
c) Structural design
d) Architectural design

SECTION B: SUBJECTIVE TYPE QUESTIONS

Answer any 3 out of the given 4 questions on Employability Skills (2 x 3 = 6 marks)

Answer each question in 20 – 30 words.
Q. 6 Write the steps to print a spreadsheet. 2
Q. 7 Explain any two qualities of an entrepreneur. 2
Q. 8 Write any two benefits of green job. 2
Q. 9 How will you minimize waste and pollution from the environment? 2

Answer any 4 out of the given 6 questions in 20 – 30 words each (2 x 4 = 8 marks)

Q. 10 Write the benefits of design thinking at work. 2
Q. 11 Explain basic motions of loom. 2
Q. 12 Write the most common cause of injuries and illness in iron and steel industry. 2
Q. 13 Write a report on any one architecture monument of national repute. 2
Q. 14 Write the various tools of empathize phase. 2
Q. 15 Critique the design of display and control of computer. 2
Answer any 3 out of the given 5 questions in 50– 80 words each (4 x 3 = 12 marks)
Q. 16 Explain the five phases of design thinking. 4
Q. 17 What is Risk Matrix? Explain risk matrix grid with the help of diagram. 4
Q. 18 What are the different stages of furniture production? Explain in detail. 4
Q. 19 List down the various tools used in In-Design software with its diagram. 4
Q. 20 What do understand by Sustainable design? How can you follow sustainability in 4
product design?

830 – DESIGN – XII

Page 8 of 8