Scribd
Upload
118 views3 pages

Datasheet

This document provides information on the 2SC5902 power transistor, including its features, maximum ratings, electrical characteristics, and safe operation areas. It is intended for use in horizontal deflection output for TVs. The document also requests attention to precautions when using the technical information and semiconductor described.

Uploaded by

elita04
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views3 pages

Datasheet

This document provides information on the 2SC5902 power transistor, including its features, maximum ratings, electrical characteristics, and safe operation areas. It is intended for use in horizontal deflection output for TVs. The document also requests attention to precautions when using the technical information and semiconductor described.

Uploaded by

elita04
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Power Transistors

2SC5902
Silicon NPN triple diffusion mesa type
Horizontal deflection output for TV
15.50.5
(10.0)

Unit: mm
3.20.1 5
(4.5)

3.00.3 5

Features
High breakdown voltage: VCBO 1 700 V Wide safe operation area Built-in dumper diode
26.50.5

(23.4)

(2.0)

5 (4.0) 2.00.2 1.10.1 0.70.1 5.450.3 10.90.5


5.50.3

5 5

Absolute www.DataSheet4U.com

Maximum Ratings TC = 25C


Symbol VCBO VCES VEBO IB IC ICP PC Tj Tstg Ta = 25C Rating 1 700 1 700 7 3 9 14 40 3 150 55 to +150 C C Unit V V V A A A W

Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (E-B short) Emitter-base voltage (Collector open) Base current Collector current Peak collector current * Collector power dissipation

3.30.3

18.60.5 (2.0) Solder Dip

3
(2.0)

1: Base 2: Collector 3: Emitter EIAJ: SC-94 TOP-3E-A1 Package

Internal Connection
C B E

Junction temperature Storage temperature

Note) *: Non-repetitive peak collector current

Electrical Characteristics TC = 25C 3C


Parameter Emitter-base voltage (Collector open) Forward voltage Collector-base cutoff current (Emitter open) Symbol VEBO VF ICBO hFE VCE(sat) VBE(sat) fT tstg tf IF = 4.5 A VCB = 1 000 V, IE = 0 VCB = 1 700 V, IE = 0 Forward current transfer ratio Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Storage time Fall time VCE = 5 V, IC = 4.5 A IC = 4.5 A, IB = 1.13 A IC = 4.5 A, IB = 1.13 A VCE = 10 V, IC = 0.1 A, f = 0.5 MHz IC = 4.5 A, Resistance loaded IB1 = 1.13 A, IB2 = 2.25 A 3 5.0 0.5 5 Conditions IE = 500 mA, IC = 0 Min 7 2 50 1 10 3 1.5 Typ Max Unit V V A mA V V MHz s s

Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

22.00.5

(1.2)

Publication date: March 2004

SJD00304AED

2SC5902
PC Ta
80 70 60 50 40 (1) 30 20 10 (3) 0 0 25 50 75 100 125 150
103
0

Safe operation area


100 ICP 10 Non repetitive pulse TC = 25C t = 100 s t= t= 10 ms 1 ms

Safe operation area (Horizontal operation)


20
fH = 15.75 kHz, TC < 90C A.S.O for a single pulse load caused by EHT flash over during horizontal operation. One action of the device must not use in all areas. (area A, B and C) But it is able to use in two areas. (area A and B or area B and C)

Collector power dissipation PC (W)

(1) TC = Ta (2) With a 100 100 2 mm Al heat sink (3) Without heat sink

Collector current IC (A)

Collector current IC (A)

IC

DC

15

10 A

101

102

(2)
1 10 100 1 000
0

B 500

C < 1 mA 1 000 1 500 2 000

Ambient temperature Ta (C) www.DataSheet4U.com

Collector-emitter voltage VCE (V)

Collector-emitter voltage VCE (V)

SJD00304AED

Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We www.DataSheet4U.com are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.

2003 SEP

You might also like