Scribd
Upload
15 views5 pages

Iot Finger Print Voting System

Uploaded by

yashht21hite
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
15 views5 pages

Iot Finger Print Voting System

Uploaded by

yashht21hite
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

/***************************************************

This is an example sketch for our optical Fingerprint sensor

Designed specifically to work with the Adafruit BMP085 Breakout


----> http://www.adafruit.com/products/751

These displays use TTL Serial to communicate, 2 pins are required to


interface
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!

Written by Limor Fried/Ladyada for Adafruit Industries.


BSD license, all text above must be included in any redistribution
****************************************************/

#include <Adafruit_Fingerprint.h>
#include <SoftwareSerial.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x27, 16, 2);


SoftwareSerial mySerial(2, 3);
const int buttonPin1 = 4;
const int buttonPin2 = 5;
const int buttonPin3 = 6;
const int buzzer = 7;
int buttonState1 = 0;
int buttonState2 = 0;
int buttonState3 = 0;
Adafruit_Fingerprint finger = Adafruit_Fingerprint(&mySerial);
int id =0,previous_voter_id = 0, vote_taken = 0;
int party_1_count=0,party_2_count=0,party_3_count=0;
String winner_name = "";
void setup()
{
pinMode(buzzer, OUTPUT);
pinMode(buttonPin1, INPUT);
pinMode(buttonPin2, INPUT);
pinMode(buttonPin3, INPUT);
// initialize the lcd
lcd.init();
// Turn on the Backlight
lcd.backlight();
Serial.begin(9600);
while (!Serial); // For Yun/Leo/Micro/Zero/...
delay(100);
Serial.println("\n\nAdafruit finger detect test");

// set the data rate for the sensor serial port


finger.begin(57600);

if (finger.verifyPassword()) {
Serial.println("Found fingerprint sensor!");
} else {
Serial.println("Did not find fingerprint sensor :(");
while (1) { delay(1); }
}
finger.getTemplateCount();
Serial.print("Sensor contains "); Serial.print(finger.templateCount);
Serial.println(" templates");
Serial.println("Waiting for valid finger...");
lcd.clear();
// Set cursor (Column, Row)
lcd.setCursor(0, 0);
lcd.print("Smart Electronic");
lcd.setCursor(0,1);
lcd.print("Voting Machine");
delay(3000);
}

void loop() // run over and over again


{

// Clear the display buffer


vote_taken = 0;
lcd.clear();
// Set cursor (Column, Row)
lcd.setCursor(0, 0);
lcd.print("Please place your");
lcd.setCursor(0,1);
lcd.print("finger");
delay(100);
id = getFingerprintIDez();
if(id > 0)
{
// Clear the display buffer
lcd.clear();
// Set cursor (Column, Row)
lcd.setCursor(0, 0);
lcd.print("Your Voter ID");
lcd.setCursor(0,1);
lcd.print(id);
delay(2000);
if(id == 4)
{
if((party_1_count > party_2_count) && ((party_1_count > party_3_count)))
{
winner_name = "BJP";
}
else if((party_2_count > party_1_count) && ((party_2_count > party_3_count)))
{
winner_name = "NCP";
}
else
{
winner_name = "Congress";
}
// Clear the display buffer
lcd.clear();
// Set cursor (Column, Row)
lcd.setCursor(0, 0);
lcd.print("winner party");
lcd.setCursor(0,1);
lcd.print(winner_name);
while(1);
}
if(previous_voter_id != id)
{
do
{
// Clear the display buffer
lcd.clear();
// Set cursor (Column, Row)
lcd.setCursor(0, 0);
lcd.print("Give Your vote");
lcd.setCursor(0,1);
lcd.print("Press Button");
delay(500);
previous_voter_id = id;
buttonState1 = digitalRead(buttonPin1);
delay(10);
buttonState2 = digitalRead(buttonPin2);
delay(10);
buttonState3 = digitalRead(buttonPin3);
delay(10);
if (buttonState1 == HIGH)
{
party_1_count = party_1_count +1;
vote_taken = 1;
}
else if(buttonState2 == HIGH)
{
party_2_count = party_2_count +1;
vote_taken = 1;
}
else if(buttonState3 == HIGH)
{
party_3_count = party_3_count +1;
vote_taken = 1;
}
else
{
vote_taken = 0;
}
if(vote_taken == 1)
{
// Clear the display buffer
lcd.clear();
// Set cursor (Column, Row)
lcd.setCursor(0, 0);
lcd.print("Thanks for your");
lcd.setCursor(0,1);
lcd.print("vote");
delay(200);
digitalWrite(buzzer, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(buzzer, LOW); // turn the LED off by making the voltage LOW
delay(1000);
}
}while(vote_taken == 0);
}
else
{
// Clear the display buffer
lcd.clear();
// Set cursor (Column, Row)
lcd.setCursor(0, 0);
lcd.print("Duplicate Vote");
lcd.setCursor(0,1);
lcd.print("buzzer on");
delay(2000);
digitalWrite(buzzer, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(buzzer, LOW); // turn the LED off by making the voltage LOW
delay(1000);
digitalWrite(buzzer, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(buzzer, LOW); // turn the LED off by making the voltage LOW
delay(1000);
digitalWrite(buzzer, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(buzzer, LOW); // turn the LED off by making the voltage LOW
delay(1000);
}
}
}

uint8_t getFingerprintID() {
uint8_t p = finger.getImage();
switch (p) {
case FINGERPRINT_OK:
Serial.println("Image taken");
break;
case FINGERPRINT_NOFINGER:
Serial.println("No finger detected");
return p;
case FINGERPRINT_PACKETRECIEVEERR:
Serial.println("Communication error");
return p;
case FINGERPRINT_IMAGEFAIL:
Serial.println("Imaging error");
return p;
default:
Serial.println("Unknown error");
return p;
}

// OK success!

p = finger.image2Tz();
switch (p) {
case FINGERPRINT_OK:
Serial.println("Image converted");
break;
case FINGERPRINT_IMAGEMESS:
Serial.println("Image too messy");
return p;
case FINGERPRINT_PACKETRECIEVEERR:
Serial.println("Communication error");
return p;
case FINGERPRINT_FEATUREFAIL:
Serial.println("Could not find fingerprint features");
return p;
case FINGERPRINT_INVALIDIMAGE:
Serial.println("Could not find fingerprint features");
return p;
default:
Serial.println("Unknown error");
return p;
}

// OK converted!
p = finger.fingerFastSearch();
if (p == FINGERPRINT_OK) {
Serial.println("Found a print match!");
} else if (p == FINGERPRINT_PACKETRECIEVEERR) {
Serial.println("Communication error");
return p;
} else if (p == FINGERPRINT_NOTFOUND) {
Serial.println("Did not find a match");
return p;
} else {
Serial.println("Unknown error");
return p;
}

// found a match!
Serial.print("Found ID #"); Serial.print(finger.fingerID);
Serial.print(" with confidence of "); Serial.println(finger.confidence);

return finger.fingerID;
}

// returns -1 if failed, otherwise returns ID #


int getFingerprintIDez() {
uint8_t p = finger.getImage();
if (p != FINGERPRINT_OK) return -1;

p = finger.image2Tz();
if (p != FINGERPRINT_OK) return -1;

p = finger.fingerFastSearch();
if (p != FINGERPRINT_OK) return -1;

// found a match!
Serial.print("Found ID #"); Serial.print(finger.fingerID);
Serial.print(" with confidence of "); Serial.println(finger.confidence);
return finger.fingerID;
}

You might also like