Scribd
Upload
530 views4 pages

3CX

3CX ADVANCED CERTIFICATION ANSWERS

Uploaded by

Ahmed Ayub Butt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
530 views4 pages

3CX

3CX ADVANCED CERTIFICATION ANSWERS

Uploaded by

Ahmed Ayub Butt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

In "Bridges" it is possible to dial external numbers via a VoIP Provider, which is

registered on the "Remote PBX". T


SIP Response Codes in the range 2xx indicate a Successful Operation. T
An IP has triggered an Anti-Hacking rule, and has been blacklisted. This IP can
manually be removed from the IP Blacklist, before the set Blacklist Interval is
reached. T
A backup will always include the "Department" settings. T
IP Phones behind the 3CX SBC still require the HTTPS port to be open on the 3CX
firewall, to retrieve their provisioning configuration.F
If an extension can view the Presence of the Remote side of a Bridge, from the
Web Client it can initiate a Chat session with an extension on the Remote 3CX. T
in 3cx, A SIP device is allowed 25 attempts (by default) to authenticate
successfully, after which it will be blacklisted. T
To connect the 3CX SBC to 3CX, only the following information is required: 3CX
PBX Tunnel port, 3CX PBX SIP port and 3CX PBX Tunnel password.T
For a backup to include the Call History, you must check backup option "Call
Logs, Chat and Conference Data".T
3CX Log Files are not deleted when you restart the 3CX Services.T
An administrator can limit the amount of calls that can traverse a Bridge.t
If outbound calls drop after 32 seconds, you must make sure that SIP ALG is
enabled on your firewall device and that the provider supports this.f
The internal IP address of 3CX (the NIC IP Address) can be changed without the
need to reinstall the PBX.t
Firewalls use NAT to remap IP information when data packages traverse them.t
For SRTP to work correctly, a certificate must be imported into 3CX and the IP
phones. This enables the caller and the server to encrypt and decrypt the audio
traffic sent and received.t
A 3CX Backup always includes the Outbound Rules.t
A dynamic IP Address is recommended to be used on the external interface of
the Firewall, so there are no DNS propagation delays when your external IP
changes.f
When an IP has been Blacklisted with a "Deny" Action, it will remain Blacklisted
indefinitely.f
The port requirement to use VoIP Providers is for the SIP (Default 5060 UDP/TCP)
and audio ports (Default 9000-10999 UDP) to be forwarded/NATed on the
Firewall.t
Notifications about events can be configured in the Admin Console, under
Dashboard → Notifications. They can be sent to multiple email Addresses,
including users who are not System Owners or System Admins.t
The virtual extension number of the Slave Bridge must match the Master
Bridge's virtual extension number. T
If local devices will be used, the local LAN IP Addresses of both your 3CX and IP
phones can be on the 192.168.35.0/20 network (Which is within the range
defined by RFC1918). T
The standard protocol port for HTTPS is port TCP:80. F
If you use your own custom FQDN, 3CX will be responsible for maintaining the
DNS entries of your FQDN up to date. F
A remote user is calling an external number through a VoIP Provider. The audio
will be routed directly between the provider and the IP Phone, while the SIP
messages are relayed in both directions via the 3CX server. F
3CX Mobile Apps using the Tunnel to connect to 3CX, only require the tunnel port
to be NATed for TCP traffic and the HTTPS port (Default TCP:5001) to be port
forwarded / NATed. They don't use UDP.f
The 3CX "Global Blacklist" feature sends and receives malicious IP Address
information to/from 3CX.f
You have a 3CX Bridge between two 3CX Systems. Each side can configure for
which individual Extensions it wants to publish/send Presence for to the Remote
side.t
Command line Backup is only possible on Linux, not on Windows.f
To run the 3CX Web Configuration Wizard remotely, you must have HTTP port
TCP:5015 forwarded / NATed on the Firewall.t

You might also like